ba used for sale

APV 16 Servo Driven Wire-Cut & Continuous Rope Extruder with Guillotine Cutter APV 16 Servo driven Wire cut and continuous rope extruder with guillotine cutter / Frozen Dough wire cutter originally designed to cut cookies onto waz papaer. - Built new in 2010 - Originally designed to cut pucks of cookies onto wax paper sheets - All servo driven - Allen Bradley controls w Touchscreen - 16 wide two roll extruder - Wire-cut with oscillating knife - Continuous extrusion capable for ropes - Paper feed roller for cutting products onto wax paper - Guillotine cutter for wax paper but can also be used to cut ropes of product to specific lengths - Raising and lowering bed - Die with (5) outlets measuring approximately 0.625 x 1.25 - 3/60/480v - Machine on casters - Footprint approximately 11 long x 4 wide Find more here - .ucymachines/ Contact us at - sales@ucymachines

Twin screw extruder APV Baker, int. ref. APV 5 (Baker Perkins) Ø50/25D + additional liner 10D(for 35D), this was totally revamped in 2017, liners and screws are in quite good conditions, reduction gear was replaced in 2021. Operator panel with recipes and 14 heating zones, all in good conditions. Find more here - .ucymachines/ Contact us at - sales@ucymachines

2012 Wächter ROTOR 60-2-Bad -- WACHTER CLEANING SYSTEMS Machine: Feeding height 9 5 0 m m Basket usable size LBH 600 x 400 x 300 mm width 1 300 mm Depth 1 600 mm Height2 200 mm ( other dimensions possible) 5. heating: Washing coils 6. drive Rhonrad: 7. belt skimmer drive 8. vapour condenser 9. Pneumatic lifting door 1 O. Automatic water level regulation 11. stainless steel basket with clamping cover VA 600x400x300mm. Mesh 6x6mm Oatum: 13.03.18 15kW 7,5kW 0,12 kW 0,04 0.45kW Basket optionally rotated, swivelled or without movement. Control system:SPS Kloeckner EASY Find more here - .ucymachines/ Contact us at - sales@ucymachines

; Power [PS]: 170; Gross weight [kg]: 8250; Engine: Battery System: LIFePO4; Accessories: Battery, Stahldach

Magazine Tubes MHUD 13 x 33 x 0.6 mm for PP strapping 2500 Pieces / Box 14 boxes in stock

Embossing pressure: 8000kg, embossing area X/Y: approx. 220mm/310mm, speed: 33rpm, table adjustment: 90mm. Equipment: 2 foil feeds, thermostat, automatic operation with timer for loading time, central lubrication, hand guard, continuously adjustable embossing time, several mounting plates. An on-site inspection is possible.

Coordinate table - rotatable BAZUS Table size 700 x 400 mm Clamping area 330 x 580 mm 3 T-slots 12 mm Travel distance approx. 400 mm Scaling 0.05 mm 1 spindle rotation = 4 mm swivel 360° with locking mechanism Overall height 195 mm Max. table load approx. 100 kg max. working pressure approx. 500 kg Dimensions L - 850 x W - 400 x H - 195 mm Weight approx. 172 kg original packaging - year of construction estimated - New - unused - - 1 piece in stock -

Circular Metal Saw manufactured in 2017. This STEIN BAK10-D features an electrical height adjustment system and individually adjustable caterpillars and saws. It has a maximum saw blade diameter of 400 mm and a regulated saw blade nominal speed ranging from 500 to 4200 rpm. If you are looking to get high-quality cutting capabilities, consider the STEIN BAK10-D machine we have for sale. Contact us for further details.

Vertical injection moulding machine manufactured in 2016. This Battenfeld CM 40 features a machine weight of 5200 kg and a working height of 1000 mm. The machine is equipped with a robust safety system, ensuring operational safety. If you are looking to get high-quality injection moulding capabilities, consider the Battenfeld CM 40 machine we have for sale. Contact us for further details.

; Gross weight [kg]: 18720; Engine: Baudouin 12M33G1650/5; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: Battery charger and coolant heater; Water Tank Volume [l]: 3000

; Gross weight [kg]: 21350; Engine: Baudouin 16M33G2000/5; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: battery charger and coolant heater; Water Tank Volume [l]: 3000

Key data: 250 °C

Manufacturer: David + Baader, Kandel Type: 10880.3 Machine Type: Industrial Furnace/Chamber Furnace/Heat Treatment Furnace For sale is a used industrial furnace from the manufacturer David + Baader Kandel, type 10880.3. The furnace is suitable for a wide range of applications in industry, trade, laboratories and workshops and is ideal for heat treatment, drying or annealing processes. Technical data Manufacturer: David + Baader Kandel Type: 10880.3 Type: Electric chamber furnace Condition: Used Further technical data on request or according to the nameplate Features and benefits Robust industrial design Uniform heat distribution Reliable temperature control Stable furnace chamber Suitable for continuous operation Proven German quality Possible areas of application Heat treatment of metal parts Annealing and tempering work Drying processes Laboratory and testing ...

Consists of a cooking cabinet and smoking unit, including documentation. On-site inspection is possible.

BARGSTEDT R TBH22/D/30/12 stacking machine was built in 2003 in Germany by BARGSTEDT Handlingsysteme GmbH. The machine is designed to automatically stack boards into neat, stable stacks. It improves the preparation of sawn timber for storage, drying, transport or further machining, reducing the need for manual handling and stacking of heavy timber elements. As a result, the BARGSTEDT R TBH22/D/30/12 is ideal for sawmills and timber machining plants. The R TBH22/D/30/12 lumber stacker automatically picks up boards with a maximum length of 2500 mm and a width of 1300 mm from two chambers using vacuum suction cups. In the working area, the positioning system aligns and correctly arranges the boards, forming a stable stack of a set height. The BARGSTEDT stacking machine can also be integrated with other machines operating in the plant, which increases production efficiency and improves wo ...

Drycooler Basetec Type: GFW 090.1/3-S(S)-F4/03/6P Cooling capacity: 64 Kw Air flow: 34 200 m3/h Number of fans: 3 x 900 mm Dimensions: 3700 x 1200 x 1800 mm Volume: 85.7 L Weight: 777 kg Pieces in stock: 1 Condition: Used Price on request. We have many others machines for meat industry and cooling - handtmann, seydelmann, viessmann, bitzer, copeland, . Check our offers.

Bausch and Ströbel Fully automatic pressure-sensitive labeling machine type ESF 1015 for self-adhesive labels (adhesive labels) The processing range is 16 -70 mm for the object diameter and 35 -320 mm for the object height

Sideloader Baumann EFQ50LL/12/50, 5to. – Used - : Price from location: only 14.950.-€ (net)! Manufacturer: Baumann Type: EFQ50LL/12/50 Serial Number: 8539-2014 Current operating hours: can be submitted later. In 2020, when the customer bought the smoked one, the 9,400h had on it, since then rather little use. Net weight: 9550 kg Load capacity: 5000kg Drive: Electric Lifting height: 4960mm Mast: Duplex Tires: 250-15 SE Overall height: 3345mm Length: 4550mm Width: 2200mm Forks: 1180 x 150 x 60 mm Motor: Battery 3 pcs 80 Volt 1200 x 290 x 630mm Cabin: Full cabin Charger Battery New in 2022 (9.500.-€), 80V 7HPZS 875Ah Condition: used Available: immediately Location: Hockenheim

Pressure: 40 bar Motor: 11 kW Voltage: 400 Volt / 50 Hz Free air delivery: 0,78 m³/min Measurement (WxHxD): 6300 x 1500 x 806 Weight: 490 kg Compressed air connection: 1/2

Pressure: 11 bar Measurement (WxHxD): 1000 x 2250 x 1000

Pressure: 11 bar Measurement (WxHxD): 1150 x 3325 x 1150 Weight: 750 kg

Pressure: 11 bar Measurement (WxHxD): 400 x 1516 x 400 Weight: 70 kg

Pressure: 11 bar Voltage: n/TÜ Volt Measurement (WxHxD): 600 x 1980 x 600 Weight: 160 kg

Bang & Co SAP 603 strapping machine – built in 2016 – fully functional + 2 rolls of tape Sell a used, fully functional Bang & Co strapping machine model SAP 603. Nameplate): • Model: SAP 603 • Machine No.: 15015642 106 • Year of construction: 2016 • Power connection: 230 V / 50 Hz • Manufacturer: Bang & Co GmbH, Oberursel • CE marking available Condition & Scope of Delivery: • Fully functional and ready to use • Good used condition • Also included: 2 rolls of strapping Ideal for commercial use for secure strapping of cartons, parcels and packages. Sale: • Delivery possible • Pick-up available If you are interested, please contact us - more photos/videos or a demonstration on site are possible.

FZWD 160x1600/1 Sabo Basis 160 Facing & Centering Machine WMW HECKERT Workpiece dia 20-160 mm Length 130-1600 mm Max. Diameter of Milling Cutter 200 mm Facing Spindle's Speeds 112-280 rpm Spindle's Speeds 560-1400 rpm Adjustable feed rate range 15 – 800 mm / min. Spindle ISO 50 Rapid traverse 6000 mm Max. stroke 230 mm Max. Depth of 6 mm Tool holder 4 - 20 mm Max. Feed path 60 mm Total connected load 20 kW Weight 4.5 t

Working width: 2500mm, an on-site inspection is possible, not under power.

max. wheel diameter: 406 mm gear width: 420 mm max. module: 4,3 min. module: 0,5 hob turning speeds: 49 - 246 U/min table bore diameter: 80 mm total power requirement: 7 kW weight of the machine ca.: 3,5 t dimensions of the machine ca.: 2,8 x 1,6 x 2,2 m Year of construction approx. 1980 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

; Gross weight [kg]: 9040; Engine: Baudouin 8M33G1000/5; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: Coolant heater and battery charger; Water Tank Volume [l]: 1250

; Gross weight [kg]: 7874; Engine: Baudouin 6M33G715/5; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: Coolant heater and battery charger; Water Tank Volume [l]: 1070

; Gross weight [kg]: 8028; Engine: Baudouin 6M33G825/5; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: Coolant heater and battery charger; Water Tank Volume [l]: 1160

; Gross weight [kg]: 4355; Engine: Baudouin 6M21G550/5; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: Coolant heater and battery charger; Water Tank Volume [l]: 740

; Gross weight [kg]: 3976; Engine: Baudouin 6M21G440/5; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: Coolant heater and battery charger; Water Tank Volume [l]: 580

; Gross weight [kg]: 2982; Engine: Baudouin 6M16G220/5; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: Coolant heater and battery charger, Including : sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 380

Vacuum Sealer Machine/Vacuum Device Year of construction not apparent with 1 sweat bar at the front VAC BOX chamber size 430 x 500 x 180mm Vacuum pump 21m3/h without inert gas device incl. mobile undercarriage 400Volt / 50 Hz / 0.75 kW - more vacuum devices in stock!

; Gross weight [kg]: 3402; Engine: Baudouin 6M16G350/5; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: Coolant heater and battery charger; Water Tank Volume [l]: 460

; Gross weight [kg]: 1500; Engine: Baudouin 6M11G165/5; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: Coolant heater and battery charger., Including : sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 224

We can offer 12 sets of Barmag winders,manufactured in 2022, model:Manta ACW6T 1500/16,16 ends,chuck length:1500mm.Never used,still in packing. Seious buyer contact us please. We have many brands and models machines, tell me what you need seriously!

; Gross weight [kg]: 1494; Engine: Baudouin 4M10G110/5; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: Coolant heater and battery charger., Including : sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 120

; Gross weight [kg]: 1055; Engine: Baudouin 4M06G55/5; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: Coolant heater and battery charger, Including : sockets 125A - 63A - 32A - 16A 5P; Water Tank Volume [l]: 87

; Gross weight [kg]: 922; Engine: Baudouin 4M06G44/5; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: Coolant heater and battery charger, Including : sockets 63A - 32A - 16A 5P - 16A 3P; Water Tank Volume [l]: 55

; Gross weight [kg]: 785; Engine: Baudouin 4M06G25/5; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: Coolant heater and battery charger, Including : sockets 2x 32A - 16A 5P - 16A 3P; Water Tank Volume [l]: 55

; Gross weight [kg]: 10990; Engine: Baudouin 12M33G1250/5; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 1710

Manufacturer: Homag, Type: BAZ 20 - 50 -12, Year: 1994, Control: Homatic, Working range X: 6000, Working range Y-axis: 1400, C axis: yes, Number of milling spindles: 1, Tool adaption system: HSK, Milling engine 1 hours power: 12, pm: 1800-24000, pm: 1800-24000, raster table: yes, Vacuum pumps m³/h: 2 X 100, Drill vertical: 14+7, Saw unit: yes, Edgebanding unit: yes, Verleimhöhe max.: 45, Vorbeschichtete Kante: no, Radial arm machine: yes, Year :1994

Manufacturer: Homag, Type: Optimat BAZ 311/40/K, Year: 2007, Software: PC85 CNC CORE Z, Feeding speed max m/min: X,Y-80, Z-30, Working range X: 4000, Working range Y-axis: 1220, Working range Z: 12-300, Year :2007