ba used for sale

geared motor, electric motor -Speed: 76 rpm -Power: 0.37 kW -Design: B5 -Shaft diameter: Ø 25 mm -Brake: 24 V -Protection class: IP 65 -Weight: 26 kg

geared motor, electric motor -with: integrated frequency converter -Speed: 51 rpm -Power: 0.37 kW -Design: B5 -Shaft diameter: Ø 25 mm -Brake: 24 V -Protection class: IP 65 -Weight: 34 kg

geared motor, electric motor -with: integrated frequency converter -Speed: 51 rpm -Power: 0.37 kW -Design: B5 -Shaft diameter: Ø 25 mm -Brake: 24 V -Protection class: IP 65 -Weight: 32 kg

geared motor, electric motor -Speed: 23.5 rpm -Power: 0.25 kW -Design: B14 -Shaft diameter: Ø 20 mm -Brake: 24 V -Protection class: IP 65 -Weight: 16 kg

geared motor, electric motor -Speed: 63 rpm -Power: 0.55 kW -Design: B5 angle -Shaft diameter: Ø 30 mm -Brake: 24 V -Protection class: IP 65 -Number: 7x geared motors available Price: per piece -Weight: 36 kg

geared motor, electric motor -Speed: 28 rpm -Power: 0.75 kW -Design: B5 angle -Shaft diameter: Ø 40 mm -Brake: 24 V -Protection class: IP 65 -Weight: 55 kg

geared motor, electric motor -Speed: 28.5 rpm -Power: 0.75 kW -Design: B5 angle -Shaft diameter: Ø 35 mm -Brake: 24 V -Protection class: IP 65 -Weight: 45 kg

• Fully automatic machine for cleaning (blowing out) bottles using compressed air • Running direction from left to right • Connection pressure 6-9 bar, working pressure 0.5-3.0 bar • Output max. 12,000 bottles/h • Bottles are rotated 180° so that the openings point downwards. Blow-out needles plunge into the interior of the bottles • Pressure sensor for checking the correct blow-out pressure • Extraction of blow-out air and residues below the bottles • HMI Siemens Simatic Touch Panel • PLC Siemens S7-300 • With format set for 10 ml vials (diam. 25.3 x 46.2 and diam. 24.0 x 45.0, other format sets on request) • Connection 230/400V/50Hz • Has worked together with bottle unscrambler 02-0746 (see pdf)

geared motor, electric motor -Speed: 54 rpm -Power: 1.1 kW -Design: B5 -Shaft diameter: Ø 30 mm -Brake: 24 V -Protection class: IP 55 -Weight: 49 kg

brake motor, electric motor, three-phase motor -with: integrated frequency converter -Power: 0.75 kW -Speed: 1420 rpm -Design: B14 -Shaft: Ø 19 mm -Brake: 24 V -Protection class: IP 65 -Weight: 15 kg

Ref. no.: 16369 Hersteller: BATTENFELD Year of construction: 2005 Clamping unit Clamping force: 75 ton Opening stroke: 800 mm Distance between tie bars: 405 x 405 mm Mould height min.: 150 mm Mould height max.: 480 mm Injection unit Screw diameter: 18 mm Injection volume: 30 cm³ Shot weight: 27 g Injection pressure: 2440 bar Measurements and weight Dimensions: 4,5 x 1,7 x 2,0 m Machine weight: 4500 kg

geared motor, electric motor -Speed: 88 rpm -Power: 2.2 kW -Design: B5 -Recess: Ø130 mm -Bolt circle: Ø 165 mm -Shaft diameter: Ø 30 mm -Brake: 24 V -Protection class: IP 65 -Weight: 55 kg

geared motor, electric motor -Speed: 35 rpm -Power: 0.18 kW -Design: B3 angle -Shaft: Ø 20 mm -Protection class: IP 65 -Quantity: 4 available Price: per piece -Dimensions: 330/180/H150 mm -Weight: 8 kg

geared motor, electric motor -Speed: 72 rpm -Power: 0.25 kW -Design: B14 angle -Shaft: Ø 20 mm -Protection class: IP 65 -Dimensions: 320/200/H220 mm -Weight: 9.5 kg

BATTENFELD TM 1300 injection moulding machine was built in 2004 in Austria by BATTENFELD GmbH. The machine is used for the economical mass production of plastic parts of various colours, shapes and sizes. The workpieces are produced using the injection moulding method, in which plasticised plastic is fed into a mould and then closed with high press force. In order to achieve parts with high repeatability and durability, the machine uses many reliable components with excellent parameters, including a high-precision mould clamping system operating at a force of up to 130 tonnes. All this is complemented by the intuitive UNILOG B4 CNC control with its many useful functions, which allows programming of the operating modes in just a few steps. The TM 1300 injection moulding machine weighs 7000 kg. Technical specifications of the BATTENFELD TM 1300 injection moulding machine - CNC controll ...

geared motor, electric motor -Speed: 89 rpm -Power: 0.3 kW -Design: B14 angle -Shaft diameter: mm -Protection class: IP 65 -Weight: 10 kg

geared motor, electric motor -Speed: 167 rpm -Power: 0.25 kW -Design: B5 -Hollow shaft diameter: Ø 20 mm -Protection class: IP 65 -Weight: 11 kg

Offer 24295 Specifications: - max. working width 3050 mm - max. cutting capacity St 40 16 mm - Projection 270 mm - Cutting angle 2.4 ° - Cutting gap adjustment by hand - Number of hydraulic hold-downs 16 pcs - Motor back gauge with positioning control 20 - 1000 mm - Front angle stop + support arms - Stroke rate depending on cutting angle and cutting length 7 - 18 rpm - Hydraulic drive 400 V / 30 kW - Table height approx. 820 mm - Space required including back gauge, without front support arms -ca. W 4000 x H 2400 x D 2400 mm - Weight approx. 14500 kg - with: - E-foot switch - Cutting Line Illumination - - Cutting Length Selection - Rear area protection with light barrier

geared motor, electric motor -Speed: 167 rpm -Power: 0.25 kW -Design: B5 -Hollow shaft diameter: Ø 20 mm -Protection class: IP 65 -Weight: 11 kg

Cap conveyor, feeding system, closure conveyor, closure conveyor system, dosing container, crown corker, screw caps. 4 chambers. Conveyor bunker silo for crown corks screw caps conveyor conveying system, 4 chambers, cabins, boxes.

geared motor, electric motor -Speed: 88 rpm -Power: 0.015 kW -Design: B5 -Shaft diameter: Ø 14 mm -Protection class: IP 65 -Weight: 6 kg

geared motor, electric motor -Speed: 104 rpm -Power: 0.18 kW -Design: B3 -Shaft diameter: Ø 17 mm -Protection class: IP 65 -Number: 5x geared motors available Price: per piece -Dimensions: 330/180/H140 mm -Weight: 7 kg

geared motor, electric motor -Speed: 37 rpm -Power: 0.18 kW -Design: B5 -Shaft diameter: Ø 20 mm -Protection class: IP 65 -Number: 3x motors available Price: per piece -Weight: 8 kg

Reform Bautz Compact MF60 machining center :::TECHNICAL SPECIFICATIONS::: CNC Model: Selca - CNC Version: 4045PD - Tool Holder: HSK 63 - Spindle Speed: 18000 Number of tools: 99 - X-axis travel: 1380mm - Y-axis travel: 600mm - Z-axis travel: 500mm - Swivel rotary table: yes Swivel rotary table type: continuous Table size: 710 x 710mm Allowable load on the board: 700Kg High refrigerant pressure: yes Chip conveyor: belt Presetting: yes Other technical data: Machine with granite base Machine equipment: Renishaw probe ready :::D DIMENSIONS AND WEIGHT::: Weight: 12000Kg

Used boiling kettle BASTRA, 400 L - Heating type: Electricity - With separate MC 30 control - Boiler capacity: 400 litres The unit has been serviced annually and is in good condition. More pictures and information on request. Visits and test runs are possible by arrangement.

geared motor, electric motor -Speed: 34 rpm -Power: 0.37 kW -Design: B3 -Shaft diameter: Ø 25 mm -Protection class: IP 65 -Number: 2x geared motors available Price: per piece -Weight: 18 kg/piece

geared motor, electric motor -Speed: 34 rpm -Power: 0.37 kW -Design: B3 -Shaft diameter: Ø 25 mm -Protection class: IP 65 -Number: 3x geared motors available Price: per piece -Weight: 18 kg/piece

geared motor, electric motor -Speed: 92 rpm -Power: 0.18 kW -Design: B5 -Shaft diameter: Ø 17 mm -Protection class: IP 54 -Weight: 7 kg

geared motor, electric motor -Speed: 50 rpm -Power: 0.12 kW -Design: B5 hollow shaft -Shaft diameter: Ø 14 mm -Protection class: IP 54 -Weight: 6 kg

- ideal embossing press suitable for book cover, die-cuts from leather, imitation leather and cloth, as well carton and und carrier bags, flat plastic parts - desk model - embossing surface 15 x 21 cm - autom. foil feed

rated capacity: 2000 KG ram hammer stroke: 1080 mm throat: 1100 mm impact capacity: 10000 kgm no. of strokes: 125 Hub/min ram hammer weight: 2300 kg work height max.: 620 mm total power requirement: . kW weight of the machine ca.: t dimensions of the machine ca.: m Steam drive The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About usMore than 400 of our own machines in the warehouseMore than 8500 m² of storage space, crane capacity 70 tMore than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

geared motor, electric motor -Speed: 25 rpm -Power: 0.18 kW -Design: B3 -Shaft diameter: Ø 25 mm -Protection class: IP 65 -Weight: 14 kg

geared motor, electric motor -Speed: 19.5 rpm -Power: 0.18 kW -Design: B3 -Shaft diameter: Ø 25 mm -Protection class: IP 65 -Weight: 22 kg

geared motor, electric motor -Speed: 19.5 rpm -Power: 0.18 kW -Design: B3 -Shaft diameter: Ø 25 mm -Protection class: IP 65 -Weight: 22 kg

geared motor, electric motor -Speed: 16.2 rpm -Power: 0.18 kW -Design: B3 -Shaft diameter: Ø 25 mm -Protection class: IP 65 -Number: 3x geared motors available Price: per piece -Weight: 21 kg

Gear motor, electric motor -Condition: unused -Speed: 90 rpm -Power: 0.37 kW -Design: B5 -Shaft diameter: Ø 25 mm -Protection class: IP 65 -Weight: 25 kg

geared motor, electric motor -Speed: 17.5 rpm -Power: 0.18 kW -Design: B3 -Shaft diameter: Ø 25 mm -Protection class: IP 65 -Weight: 16 kg

geared motor, electric motor -Speed: 103 rpm -Power: 0.37 kW -Design: B5 -Shaft diameter: Ø 25 mm -Protection class: IP 65 -Weight: 18 kg

geared motor, electric motor -Speed: 76 rpm -Power: 0.37 kW -Design: B5 -Shaft diameter: Ø 25 mm -Protection class: IP 65 -Weight: 23 kg

geared motor, electric motor -Condition: unused -Speed: 189 rpm -Power: 0.37 kW -Design: B5 -Shaft diameter: Ø 25 mm -Protection class: IP 65 -Weight: 24 kg

geared motor, electric motor -Speed: 33 rpm -Power: 0.37 kW -Design: B3 -Shaft diameter: Ø 25 mm -Brake: 24 V -Protection class: IP 65 -Weight: 20 kg

weight: . kg taper MK: . height: 350 mm flute distance: 255 mm thickness of jaw: 80 mm Jaw extension with claw boxes for carousel latheJaw height 80 mmJaw width 80 mmGroove spacing 255 mmHeight 700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 30000 mm y-travel: 3600 mm z-travel: 1900 mm Control: Heidenhain type: TNC 530 i milling head -swivable: CNC turning speeds: 4000 U/min conus taper: DIN 69871+AD mm spindle drive: 46 kW Feed: 10000 mm/min Rapid movement: 25000 mm/min chip conveyor: 2 St. coolant: filter unit: Plate area: 31000x2500 mm total power requirement: 85 kW weight of the machine ca.: t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About usMore than 400 of our own machines in the warehouseMore than 12,000 m² of storage space, crane capacity 70 tMore than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company,then contact us. The data for this ad was created with ModulMWS - the software solution of Lo ...

geared motor, electric motor -Speed: 33 rpm -Power: 0.37 kW -Design: B3 -Shaft diameter: Ø 25 mm -Brake: 24 V -Protection class: IP 65 -Weight: 20 kg

geared motor, electric motor -Speed: 34 rpm -Power: 0.37 kW -Design: B3 -Shaft diameter: Ø 25 mm -Brake: 24 V -Protection class: IP 65 -Number: 3x geared motors available Price: per piece -Weight: 20 kg

geared motor, electric motor -Condition: Geared motor is unused -Speed: 33 rpm -Power: 0.18 kW -Design: B3 -Shaft diameter: Ø 25 mm -Protection class: IP 65 -Number: 4x geared motors available Price: per piece -Weight: 20 kg

The technical data are manufacturer or operator information and are therefore non-binding for us. We reserve the right to sell the goods prior to the event, our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 12,000 m² of storage space, crane capacity 70 t More than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 1000 kg workpiece length - max.: 6500 mm weight of the machine ca.: 600 t dimensions of the machine ca.: 120x30 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 125 mm coil weight: 2x 0,8 t coil internal dia.: 300-500 mm coil outside dia.: 1200 mm weight of the machine ca.: 0,7 t dimensions of the machine ca.: BxTxH 2000x2000x1800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.