ba used for sale

FILLETING MACHINE BAADER TPYE: 184 Technical description: Machine number: 10.3320 0184 Power supply: 380 V, 3 Ph, 50 Hz, 11.5 kW, 22.0 A Plastic conveyor belt width: 500 mm Band width: (2x) 160 mm Throughput: 24-40 pieces/min Water consumption: 25 l/min Weight: 2.500 kg Dimensions: 5400 x 1300 x 1450 mm This machine is laid out for filleting gutted and headed cod, haddock, saithe, hake, merluza and withing from 30 to 70 cm in total lenght (=0.3 to 2.5 kg, gutted including head). Proven BAADER filleting system providing for highest yield and reliability. The BAADER 184 is equipped with an integrated skinning device.

Test pump, pressure test device, measuring device, pressure test pump -Manufacturer: Junginger, mobile extraction device -Pressure display: 40 bar -Dimensions: 790/480/H775 mm -Weight: 47 kg

TROUT GUTTING MACHINE BAADER, TIPO: 140 Technical description: Serial number: 74-9019-0140 Power supply: 380 V, 3 Ph, 50 Hz, 7 A Dimensions: 3050 x 550 x 1240 mm This machine is laid out for gutting trouts of a live weight from 240 to 650 g in a commercial manner. The abdominal cavity is cleanly cut open and the guts including the kidney are completely removed by means of a vacuum suction device. The special design of the BAADER 140 is capable of gutting up to 38 fish/min. The gills can either be removed or retained; this requires an easy adaption.

FILLETING MACHINE BAADER 35 (SINGLE OR BUTTERFLY FILLET) FOR HERRING (20-40 CM), MACKEREL (24-40 CM), BLUE WITHING (22-40 CM) AND OTHER PELAGICS Technical description: Machine number: 10-1363-0035 Throughput rate: 100-200 pieces/min Voltage/Power: 380 V, 3 Ph, 50 Hz, 11 A Dimensions: 3950 x 2600 x 1550 mm Weight: 835 Kg The BAADER 35 can process herring, from 20-40 cm (75-450 g), mackerel and silver smelt 24-40 cm (130-600 g), blue whiting 22-40 cm (75-350 g) as well as trout 25-38 cm (160-600 g) with all usual cuts. Amodified version for smaller herring from 17-32 cm (35-240 g) is BAADER 36. Separate drives of heading and filleting sections enable operation of the heading section as a separate machine with an optional nobbing attachment. Only on operator is required when the BAADER 35/36 is combined with the automatic feeder BAADER 482 or 484. A skinning machine BAADER 55 can be att ...

SPECIFICATIONS: Table size: 2200x450 mm (extendable) Installed power: 5 Kw EQUIPMENT: Drive on 3 rollers Accessories

A rotational shear viscometer according to Mooney for performing Viscosity tests (ML / MS 1+X), Stress Relaxation testing, Mooney Scorch, Delta Mooney testing on polymers as well as rubber compounds for quality control, research and development applications.

Geared motor, electric motor, three-phase motor, electric geared motor -Power: 0.65 kW -Translation: i = 21.8 -Design: B14 -Shaft: Ø 17 x 20 mm -Dimensions: 300/190/H140 mm -Weight: 12.8 kg

Manometer, test manometer, pressure measuring device with Bourdon tube, pressure-temperature measurement technology -Manufacturer: Wika, pressure gauge type 233.50.063 16 bar -Art.-No.: 12064394 -Screw connection: G1/4B -Dimension box: 90/100/H70 mm -Weight: 0.3 kg

three-phase motor, electric motor, lifting motor -Manufacturer: Balkancar, lifting motor up to 3200 kg load -Type: KG 2011-6 -Power: 4.5 kW -Speed: 920 rpm -Shaft: Ø 30 x 85 mm -Design: B5 -Protection class: IP 44 -Dimensions: 475/345/H355 mm -Weight: 66 kg

Power supply, converter, converter, power supply unit, Smart-UPS, spare battery -APC: Back-UPS HS 500 -Connection: 230 V/50-60 Hz -Active power: 300 W -Apparent power: 500 VA -Price: per piece -Number: 3 pieces -Dimensions: 375/225/H105 mm -Weight: 7.1 kg

x-travel: 30000 mm y-travel: 3600 mm z-travel: 1900 mm Control: Heidenhain TNC 530i turning speed range - milling: 4000 U/min taper: DIN69871+AD spindle drive: 46 kW feed range - spindle head: 10000 mm/min rapid traverse: 25000 mm/min floor plate size:: 30000x3000 mm total power requirement: 85 kW weight of the machine ca.: t dimensions of the machine ca.: m Woeking hours: 9332 Machine number: 5619 Chipconveyor: 2x Angle plates: 4x Box table The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

AUTOMATIC SLOT MORTISER type BACCI MOD second hand machine machine with cast iron structure machine according to CE regulations: YES electronic oscillation speed spindles with inverter max. slots width mm. 120 + thickness max. slots thickness mm. 20 max slots depth mm.80 coller shank mm.16 table inclination 20° spindle motor power: Hp 3 oscillating motor power: Hp 1 spindle rotation rpm 9500 net weigth kgs. 700 volt. 380/50

Gear motor, electric motor, three-phase motor -Speed: 114/228 rpm -Power: 0.8/1 kW -Construction: B3 -Diameter shaft: Ø 24 mm -Protection class: -Number: 1x motors available -Price: per piece -Dimensions: 405/225/H210 mm -Weight: 22.3 kg

Machine condition: cleaned and tested Year of construction: 2013 Main motor incl. Mentor control suitable for KBA RA 106 Delivery date: immediately from stock Price on request. We deliver and install worldwide!

- Handwheel adjustment of spindle height/angle - Spindle angle displayed via viewing window, swivel range -4 to + 45° - Right-left rotation - double-sided table extension to 2,000 mm - Engine power 5 kW - Speed 3,000 / 4,500 / 6,000 / 9,000 / 12,000 rpm (manually adjustable) - Suction nozzle Ø 2 x 120 mm - Emergency stop switch) - Power: 380 V, 50 Hz, 3~, 10.8 A - with 4-roller feeder

Control unit, control panel, control panel, control unit, keyboard, screen, control, handheld terminal -Manufacturer: Battenfeld, control unit from injection molding machine BA-T2400 -Dimensions: 380/120 / H85 mm -Weight: 1.7 kg

Brand Bauer Model: GF-24KW Year of construction: Unused, 2023 Serial Number: On request Capacitance (KvA) 30 Capacity(kw) 24 Engine model ZH4100D Fuel: Diesel Alternator model YHG-24KW Voltage 400 Frequency (Hz) 50 RPM 1500 Amperes (A) 43.3 Dimensions LxWxH (mm) 1600 x 760 x 1650 Weight (Kg) ca 600 Number of pieces in stock 2 Made in China Comments Unused open skid diesel generator, Smartgen genset controller

Manometer, test manometer, pressure measuring device with Bourdon tube, pressure-temperature measurement technology -Manufacturer: Wika, pressure gauge type 212.20.100 1.6 bar -Screw connection: G1/2 B below -Dimension box: 140/110/H60 mm -Weight: 0.6 kg

Manometer, test manometer, pressure measuring device with Bourdon tube, pressure-temperature measurement technology -Manufacturer: Riegler, pressure gauge 0 to 4 bar -Price: per piece -Number: 2 piece -Minimum purchase: complete -Dimension: Ø 62 x 47 mm -Weight: 0.1 kg/piece

Manometer, test manometer, pressure measuring device with Bourdon tube, pressure-temperature measurement technology -Manufacturer: Riegler, manometer -Type: 110.43-K 0 to 2.5 bar -Screw connection: G1/8 B -Price: per piece -Number: 9 piece -Dimension box: 50/45/H40 mm -Weight: 0.1 kg/piece

Manometer, test manometer, pressure gauge with Bourdon tube, pressure-temperature measuring technology -Pressure gauge: 0 to 160 bar -Dimensions: Ø 62 x 47 mm -Weight: 0.1 kg

Absolute rotary encoders, encoders, rotary encoders, encoders, absolute rotary encoders -Manufacturer: Baumer, Absolut Rotary Encoder -Type: GM400.Z33 -Voltage: 10-30 VDC -Shaft: Ø 10 x 20 mm -Price: per piece -Number: 7 piece -Dimension: Ø 58 x 112 mm -Weight: 0.3 kg/piece

I am selling a stacking system HOMAG BARGSTEDT TBH22/D/25/12, built in 2001. Destacking system One-sided guide Spout also suitable for pallets. Postural head vacuum shoe system. Vacuum system (with pump) Automatic loading. Entry table motorized roller system Exit table on the floor with lifting mechanism motorized roller system Exit table front roller system Enters feed roller stazion for quilted material. Security fences fully complete ! Working capacity Approx. 8 cycles / min Available right away. Ready for use, possible to test. With CE certificate and full documentation.

Stacking electrode 2.5 x 350 -Type: BASO G -Weight per package: 2.8 kg

Absolute encoder, encoder, rotary encoder, encoder, incremental encoder -Manufacturer: Balluff, Incremental Encoder from lathe Kern CD 480 -Type: BDG 6360-0-05-W031-1024-65// -Price: complete -Dimensions: 100/90/80 mm -Weight: 4.3 kg

Manometer, test manometer, pressure measuring device with Bourdon tube, pressure-temperature measurement technology -Display: 0-16 bar -Standard: EN 837-1 -Number: 3x manometers available -Price: per piece -Dimension box: 200/200/H60 mm -Weight: 2.1 kg

Interface converter, converter module, FL Comserver -Manufacturer: Phoenix Contact, FL Comserver -Type: Basic 232/422/485 Ord.-No. 23 13 478 -Price: per piece -Quantity: 3 available -Dimensions: 100/20/H110 mm -Weight: 0.1 kg/pc.

Electric motor, three-phase motor -Power: 3.0 kW -Speed speed: 955 rpm -Shaft: Ø 38 x 80 mm -Design: B5 -Recess: Ø 230 mm -External flange: Ø 300 mm -Protection rating: IP55 -Dimensions: 590/302/H295 mm -Weight: 67kg

Proximity switch, cylinder sensor, magnetic field sensor -Product type: BMF 315K-PS-C-2-PU-05 -Number: 6x available -Price: per piece -Weight: 70 g

Centrifugal fan, dust extractor fan, fan, extractor, dust fan -Motor: Siemens type 1L4 206-6AA60-Z 200L -Motor power: 18.5 kW -Speed: 975 rpm -without: housing -Impeller outer diameter: 960 mm -wing height: mm -Dimensions: 1425/1115/H1390 mm -Weight: 412 kg

Forklift motor with gear, electric motor, direct current motor, traction motor, drive motor -Voltage: 22 volts -Power: 5.2 KW -Speed: 2800 rpm -Shaft: Ø 28 mm -Number: 2x available -Price: per piece -Dimensions: 290/H230 mm -Weight: 26 kg

Bead mills Manufacturer: Bachofen AG (CH) Type: Dyno-Mill KDL-Pilot 3 items on stock No.: 1) 910969; 2) 860739; 3) 840338 Power: 3.3 kW in Eex protectioin very good condition with various spare parts LWH: 650 x 500 x 500 mm

Year of construction: 1993 Capacity: max 600 cycles / hr. Dimensions disassembled : Length: 3,000 mm Width: 2,350 mm Height: 2,600 mm Weight: 3.000Kg Was used in a fruit juice bottling plant and is currently set up to handle the following formats: 6 x 1.0l VDF bottles – 6 crates, 3 heads / crate transverse Complete documentation available. The machine has already been dismantled and is ready for collection.

Servo motor, electric motor, DC motor, stepper motor, stepper motor, stepping motor -Speed: 6000 rpm -Power: 1 kW -Construction: B5 -Diameter shaft: Ø 24 mm -Number: 1 piece of motors available -Price: per piece -Dimensions: 500/165/H210 mm -Weight: 18 kg

Proximity switch, cylinder sensor, magnetic field sensor -Diameter: 6.5mm Length: 30 mm -Cable length: 2 m -Product type: IFR 06.26.15 -Number: 5x available -Price: per piece -Weight 40 g

Gear motor, electric motor -Speed: 141/1440 rpm -Hollow shaft: Ø 32 mm -Power: 3kW -Dimensions: 500/195/H240mm -Weight: 47kg

Grill, Fabr.Silex, baking plates with grooves

Alu baking trays, with 3 sides rim, 580 x 780 mm

Bandslicer for toast bread, Fabr. Rex

Planetary stirrer, Fabr. Baer, Type R 60/30

150 l stainless steel kettle suitable for Bär R 150 planetary mixer, d 590, h 650 mm, capacity 150 l

Flange mount, drive flange -Feed flange with: drive bolt -Outer diameter: 315 mm -Short cone mount for: bayonet disc attachment -Cone size: 6 -Bolt circle: Ø 133.4 mm -Weight: 20 kg

Electric motor, three-phase motor -Manufacturer: ABM Baumuller, electric motor type 3.DF 63 o-4/2 -Power: 0.18 / 0.25 kW -Speed: 1390/2820 rpm -Shaft: Ø 11 x 22 mm -Construction: B14 -Protection class: IP 54 -Dimensions: 205/160 / H130 mm -Weight: 4.8 kg

Power converter, power supply, power supply unit, servo power unit -Manufacturer: Baumüller -Type: BUS21-15/30-31-020 -Quantity: 2 available -Price: per piece -Dimensions: 400/55/H310 mm -Weight: 4.9 kg/piece

Baking tray, with 2 sides rim, 840 x 360 mm

Baking grid (frame with wire mesh)

Baking tray with 2 sides edge 1000 x 250 mm

Black plate, with 3 sides margin

Baking tray cleaning machine, Fabr. KD Putz

Inductive sensor, electronics sensor -Type: IFRM 08P17A1/S35L -Number: 2x available -Price: per piece -Weight: 15 g