ba used for sale

Offered is a pallet of paper bags for trade etc. estimated value of goods: 2500 € Shipping within Germany possible - direct processing with the seller. Only bid if you have sufficient financial resources, a bid is binding. The Euro pallet is not part of the auction. Auction-ID: A7-46944-42

Contain various items that have been tested for functionality. Shipping within Germany possible - direct processing with the seller. Estimated value of goods 2500 € The Euro pallet is not part of the auction. Auction-ID: A7-46944-56

Approximately 20 pieces. Auction-ID: A1-46651-512

Equipped with insulated walls and roof; 2 bedrooms; living room with corner kitchen; bathroom with shower, toilet and sink; each room equipped with lighting and sockets 230V; meter cupboard; PVC floor; aluminum windows and doors; lockable; water, electricity and drainage can be easily connected is prepared; unused and ready for transport (note furniture not included) (transport dimensions 590x220x248 cm, weight 3100 kg) Auction-ID: A1-40113-87

Contain various items \"untested returned goods\" that are expressly sold as defective. Shipping within Germany possible - direct processing with the seller. Estimated value of goods 2000 € The Euro pallet is not part of the auction. Auction-ID: A7-46944-219

Equipped with: Sprinkler/cannon, 370 m hose, 12.5 cm diameter hose, Bauer Rainstar E4 125-370 irrigation reel from 1997 with 125 mm (12.5 cm) hose diameter, 370 meters / 37,000 cm hose length, working pressure approx. 4–11 bar, empty weight approx. 4,900 kg, total weight approx. 8,000 kg, total dimensions approx. 810 × 270 × 370 cm (L×W×H) Auction-ID: A1-40139-112

New Victron Energy 3-Phase Storage System – 3× MultiPlus-II 10000 with 45 kWh LFP Battery ( 3x 15kWh LFP Battery ) Offered is an installed and programmed professional 3-phase energy storage system from Victron Energy, consisting of 3× MultiPlus-II 10000 inverter/chargers in combination with a 45 kWh lithium iron phosphate (LFP) battery. This system is ideal for homes and businesses with a 3-phase connection, and for applications such as solar energy storage, peak load, emergency power supply and hybrid or off-grid installations. The large battery capacity ensures long autonomy and high operational reliability. ✅ Benefits • Full-fledged 3-phase Victron system (3× 10000) • 45 kWh LFP battery: safe, low-maintenance and long service life • Ideal for higher power and continuous operation • Suitable for on-grid, hybrid and off-grid applications • Smart energy management and  ...

Lot 4-WORK Professional Work Gloves Sandy Grip EN388 (2400 Pairs) Specifications: Brand: 4-WORK Type: Work Gloves Sandy Grip Standard: EN388 Coating: Latex Sandy Grip Sizes: 9 / 10 / 11 (approximately evenly distributed) Content: 2400 pairs Packaging: 10 boxes of 240 pairs Features: Latex grip coating suitable for wet and dry work Breathable and flexible material Optimal tactile sensitivity Packed per full box Particularities: Large batch suitable for intensive use and resale Widely applicable in construction, industry, logistics and maintenance Sale concerns a bulk batch Auction-ID: A1-40113-202

Contain various items that have been tested for functionality. Shipping within Germany possible - direct processing with the seller. Estimated value of goods 2500 € The Euro pallet is not part of the auction. Auction-ID: A7-46944-60

Approx. 1800 pieces / a pallet of paper bags are offered. estimated value of goods 900 €Shipping within Germany possible - direct processing with the seller. Only bid if you have sufficient financial resources, a bid is binding. The Euro pallet is not part of the auction. Auction-ID: A7-46944-108

Contain various items that have been tested for functionality. Shipping within Germany possible - direct processing with the seller. Estimated value of goods 2500 € The Euro pallet is not part of the auction. Auction-ID: A7-46944-63

Consisting of: DJR186 Reciprocating Saw, DTM52 Multitool, DJV182 Jigsaw, DGA504 Angle Grinder, DC18RD Dual Battery Charger, Tool Bag Auction-ID: A1-46651-1017

including dimensions: W310 x H160 x L2660 mm and remnants Auction-ID: A1-46651-102

Contain various items that have been tested for functionality. Shipping within Germany possible - direct processing with the seller. Estimated value of goods 2500 € Euro pallet and lattice box are not part of the auction. Auction-ID: A7-46944-72

Contain various items that have been tested for functionality. Shipping within Germany possible - direct processing with the seller. Estimated value of goods 2500 € The Euro pallet is not part of the auction. Auction-ID: A7-46944-54

What is offered here is a refrigerator ideal for the counter area. estimated value of goods 1000 €Shipping within Germany possible - direct processing with the seller. Only bid if you have sufficient financial resources, a bid is binding. Auction-ID: A7-46944-6

Several 100 pieces / paper bags are offered. estimated value of goods 2000€ Shipping within Germany possible - direct processing with the seller. Only bid if you have sufficient financial resources, a bid is binding. The Euro pallet is not part of the auction. Auction-ID: A7-46944-119

Contain various items \"untested returned goods\" that are expressly sold as defective. Shipping within Germany possible - direct processing with the seller. Estimated value of goods 2000 € The Euro pallet is not part of the auction. Auction-ID: A7-46944-11

Equipped with: dosing slide / shut-off valve, manual operation via lever, Suitable for controlled unloading of bulk products, fork sleeves Auction-ID: A1-40139-203

Jaws with base jaws and top jaws (Forkardt) F+315, F 315 DURO 315 FNC 400 FGB 315 125 32 D180596000 12 43 26 M12 x 1.5 54 63.5 0.95 DURO-NC 315 HG-F 315 KTNCV 400 DURO-N ) Designation and jaws with base jaws and top jaws (Forkardt) F+315, F 315 DURO 315 FNC 400 FGB 315 125 32 D180596000 12 43 26 M12 x 1.5 54 63.5 0.95 DURO-NC 315 HG-F 315 KTNCV 400 DURO-N ) see pictures Viewing desired by appointment Auction-ID: A7-46993-5

Consisting of: DTM51 Multitool, DGA504 Angle grinder, DDF484 Screwdriver, DTD152 Impact driver Auction-ID: A1-46651-1018

Women's underwear in different colors and sizes. estimated value of goods: 1000€ Shipping within Germany possible - direct processing with the seller. Only bid if you have sufficient financial resources, a bid is binding. Auction-ID: A7-46944-229

New Victron Energy 3-Phase Storage System – 3× 5 kVA MultiPlus-II with 45 kWh LFP Battery (3x 15 kWh LFP Battery) Offered is an installed and programmed professional 3-phase energy storage system from Victron Energy, consisting of 3× 5 kVA MultiPlus-II inverter/chargers in combination with a 45 kWh lithium iron phosphate (LFP) battery. This system is ideal for homes and businesses with a 3-phase connection, and for applications such as solar energy storage, peak load, emergency power supply and hybrid or off-grid installations. The large battery capacity ensures long autonomy and high operational reliability. ✅ Benefits • Full-fledged 3-phase Victron system (3× 5 kVA) • 45 kWh LFP battery: safe, low-maintenance and long service life • Ideal for higher power and continuous operation • Suitable for on-grid, hybrid and off-grid applications • Smart energy management and m ...

Contain various items that have been tested for functionality. Shipping within Germany possible - direct processing with the seller. Estimated value of goods 2500 € The Euro pallet is not part of the auction. Auction-ID: A7-46944-50

Equipped with: 10 kWh, 4x 5.12 kWh CFE battery, Blauhoff cube 20 housing, easy to install, connectable to e.g. Deye inverter Auction-ID: A1-40113-21

Contain various items that have been tested for functionality. Shipping within Germany possible - direct processing with the seller. Estimated value of goods 2500 € The Euro pallet is not part of the auction. Auction-ID: A7-46944-62

Approx. 1800 pieces / a pallet of paper bags are offered. estimated value of goods 900 €Shipping within Germany possible - direct processing with the seller. Only bid if you have sufficient financial resources, a bid is binding. The Euro pallet is not part of the auction. Auction-ID: A7-46944-111

Equipped with: 20kWh, 4x 5.12 kWh CFE battery, Blauhoff cube 20 housing, easy to install, connectable to e.g. Deye inverter Auction-ID: A1-40113-20

Offered is a pallet of paper bags for trade etc. estimated value of goods: 2500 € Shipping within Germany possible - direct processing with the seller. Only bid if you have sufficient financial resources, a bid is binding. The Euro pallet is not part of the auction. Auction-ID: A7-46944-44

Strap width 15mm. On pallet Auction-ID: A1-46623-79

Contain various items \"untested returned goods\" that are expressly sold as defective. Shipping within Germany possible - direct processing with the seller. Estimated value of goods 2000 € The Euro pallet is not part of the auction. Auction-ID: A7-46944-218

including: posts, size: 140 x 150 x L2540 mm, ring beams, size: 190 x 65 x L2930 mm, lengths of profiled log cabin sections. Total size: L 410 x W240 x H255 cm Auction-ID: A1-46623-93

Equipped with: 20kWh, 4x 5.12 kWh CFE battery, Blauhoff cube 20 housing, easy to install, connectable to e.g. Deye inverter Auction-ID: A1-41997-70

Contain various items that have been tested for functionality. Shipping within Germany possible - direct processing with the seller. Estimated value of goods 2500 € The Euro pallet is not part of the auction. Auction-ID: A7-46944-59

1x loose, 5x on pallet Auction-ID: A1-46623-113

Consisting of, among other things: formwork material, boxes, pallets, yokes, PVC pipes, panels of roller shutter approximately 675 cm. Auction-ID: A1-46651-514

Contain various items \"untested returned goods\" that are expressly sold as defective. Shipping within Germany possible - direct processing with the seller. Estimated value of goods 2000 € The Euro pallet is not part of the auction. Auction-ID: A7-46944-216

Contain various items that have been tested for functionality. Shipping within Germany possible - direct processing with the seller. Estimated value of goods 2500 € The Euro pallet is not part of the auction. Auction-ID: A7-46944-61

Edge banding machine Type: G 200 Manufacturer: Felder Year: 2007 Edge thickness: 0.4 – 2 mm Part thickness: 10 – 45 mm Min. part length: 250 mm Min. part width: 90 mm Feed: 5 – 5.5 m/min Moulding speed: 9000 rpm Moulding diameter: 70 mm Glue temperature: 20 – 210 °C Glue container capacity: 1.2 kg Weight: 310 kg Including suction Copy wheels from a newer model Currently after service Machine in good condition, fully functional, under power Find more here - / Contact us at -

Edge banding machine Type: G 360 Manufacturer: Felder Year: 2022 Edge thickness: 0.4 – 5 mm Part thickness: 10 – 45 mm Min. part length: 210 mm Min. part width: 70 mm Feed speed: 8 m/min Total power: 5,5 kW Weight: 450 kg Machine length: 2300 mm Equipment: pre-milling unit trimming unit lamp for preheating edged material glue melting tank removable glue tray radius cidliny flat cidliny Machine in very good condition, fully functional, under power Find more here - / Contact us at -

automatische bandzaag ronde inhoud: 360 mm Capaciteitsvierkant: 360 x 360 mm spanentransporteur Depth of throat: 360 mm Max height of workpiece: 360 mm Table travel : Manual (1) -- hydraulic (2): hydraulic Sawspeed: 20 > 80 m/min Length of band saw: 4420 x 32 x 1,1 mm Power needed: 3,7 kW Length : 2500 mm Depth : 2200 mm Height: 1600 mm Weight: 2 ton

Round material Ø 6-76 mm Rectangle minimum edge length 6 mm, envelope maximum 76 mm Dimensions LxWxH: 1800 x 850 x 1300 mm Weight approx. 600 kg Last attached to INDEX ABC 65

MÜLLER BARRELS, 200 L CAPACITY 12 Müller metal barrels, with lid and quick-release closing system. CHARACTERISTICS Units: 12 Capacity: 200 L (ca)

Lots consisting of 3 stackable stacking racks of the same size, barels, filled with timber: approx. 180 pieces of narrow planks (4/12 to 4/20), length approx. 1m approx. 100 pieces wide planks (4/28 to 4/32), length approx. 1m approx. 100 squared timbers / bearing timbers (6/8, 8/8, 10/8), length approx. 1m SO001231 Auction-ID: A1-46973-216

Forte BA 321 Automatic Band Saw - With hydraulic clamping and feeding device - Cutting range around 320 mm - Square 300 x 300 mm - Large section length for single stroke up to 400 mm - Multiple feed up to 10 x 400 mm - Saw blade dimensions 3660 x 25 x 0.9 mm - Cutting speed infinitely variable 20 - 100 rpm - Feed speed hydraulically infinitely variable - Coolant device - Material support height 720 mm - Saw blade - Drive 400 V / 2.5 kW - Space requirement approx. W 1950 x H 1250 x D 1500 mm - Weight approx. 1000 kg Auction-ID: A7-47048-20

Forte SBA 241 Automatic Band Saw Cutting diameter 10 - 250 mm Saw blade length 4,100 mm Cutting width 1.1 mm Max. section length 3 - 9,999 mm Cutting speed 11 - 110 m/min Saw blade dimensions 4,100 x 34 x 1.1 mm Total power requirement 1.4 kW Machine weight approx. 1.0 t Space requirements approx. 2.0 x 2.0 x 1.5 m Auction-ID: A7-47048-21

Technical data drilling rig: Manufacturer: Peddinghaus Type: BDL 760/3 Machine No.: 4742570604001 Technical data metal band saw: Manufacturer: MEBA Machine Type: 400DG-700 Engine No.: 16835 Year of Make: 2001 Cutting range: 90° Round: 406 mm, Flat: 700x400 mm Mitre left: 45° Round: 400 mm, Flat: 560x400 mm 30° Round: 300 mm, Flat: 300x350 mm Mitre right: 45° Round: 400 mm, Flat: 600x400 mm Clamping range bundle tension: Width: 0-700 mm Height: 20-406 mm Remnant lengths: approx. 75 mm (manual operation) Cutting speed: 18 to 95 m/min - infinitely variable 15 to 150 m/min - AC drive (option) Cutting pressure: infinitely variable hydraulic Lowering speed: 0 to 300 mm/min - infinitely variable Saw blade dimensions: 6760 x 41 x 1.3 mm Saw blade tension: hydraulic Dimensions and weight: Weight of the machine: approx. 3,300 kg (net) Dimensions of the machi ...

Producer: KASTO, Type: HBA 420 AU, C93I8EN Year of production: 1995 Fully automatic NC horizontal band saw with hydraulic clamping device up to 400 mm, 1 chip conveyor, 1 external Chip conveyor, 1 roller conveyor, 1 roller conveyor, hydraulic drive, motor switched off, Dimensions (width x height x depth): approx. 400x200x350 cm Auction-ID: A1-47017-107

Filled with: a.o. STEINEL HL 1920 E Heat Gun WÜRTH cable dismantler, as good as new KLAUKE System Press Tool with 3 Inserts WÜRTH Caulking Gun Various screwdrivers Pack size approx. 600x400x350 mm Auction-ID: A1-47009-98

Scaffolding parts system Plettac SL 70/100 and compatible, consisting of: approx. 23 pieces Plettac SL back railing L200 SO001326 Auction-ID: A1-46973-319