ba 120 used for sale

- old German quality, virtually indestructible. - Aluminum boiler - With steel lifting arm - without lid / protective grille - with age-related signs of wear and tear and Wear and tear see photos - Shell diameter 76 cm (inside) - Shell height: 44cm (inside) - Height: 114 cm (lowest position) - Width / Length: 99cm x 83cm - 380 volts

Formwork nails, formwork nails, strip nails, nail strips, compression head nails -Manufacturer: Collated Fasteners, strip nails 1 box/ 1400 pieces -Type: SNK 2266 3.8 x 120 mm -Price/Delivery: complete -Transport dimensions: 380/200/H130 mm -Total weight: 15.4 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Hydraulic cylinder: single-acting stroke 120 mm -Type: unfortunately without type designation -Piston rod: Ø 25 mm -Hole: Ø 20 mm -Number: 2x cylinders available -Price: per piece -Dimensions: Ø 60 x 300 mm -Weight: 4.0 kg/piece

Counterholder, counter bearing, bearing block, pillow block, holder for draw and lead screw, draw and lead screw holder, spindle holder -Holder: for pull and lead screw -Dimensions: see photos -Transport dimensions: 160/120/H400 mm -Weight: 14.7 kg

Suspension clamp, clamp sleeve, sliding gate sleeve, cable clamp, cable trolley, cable trolley component, cable holder, cable trolley, rail clamp -Rail clamp: 2 pieces -Type: Item no. 2 55528 Y8 2 55528 Y12 -Dimensions: see photos -Shipping/Price: complete -Dimensions: 115/120/H100 mm -Weight: 2.5 kg/piece

Clamping angle, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box -Clamping cube: with groove, solid design -Groove width: 24/31 mm -Dimensions: see photos / technical drawing -Dimensions: 150/120/H95 mm -Weight: 7 kg

Heavy-duty transport rollers, machine rollers, transport trolleys, heavy-duty trolleys, tank rollers, machine transport rollers -Machine transport roller: armored rollers 2 pieces -Load capacity: kg -Shipping/Price: complete -Dimensions: 220/120/H75 mm -Weight: 7.7 kg/piece

V-belt pulley, pulley with taper bush, taper clamping bush, taperlock clamping bush -V-belt pulley: 2-groove pulley type SPZ Ø 120 mm -V-belt width: 10 mm -Mounting: Ø28 x 52 mm -Dimensions: Ø120 x 52 mm -Weight: 2.2 kg

Boring head, spindle head, drilling head, grooving drilling head, grooving head, spindle drilling head, boring head, spindle tool, facing and boring head -Boring head: MK5 mount -Spindle size: Ø 120-140 mm -Dimensions: Ø 124 x 253 mm -Weight: 8.4 kg

Tool holder, milling holder, milling tool, test mandrel -Test mandrel: Ø 50 mm -Recording: SK50 -Shaft: R=25,000 / L=120,068 mm -Dimensions total: Ø 98 x 255 mm -Weight: 4.4 kg

electric magnetic plate, clamping plate, magnetic clamping plate, magnetic clamping plate, magnetic prism, magnetic prism -Magnetic prism: Magnetic measuring and clamping prism -Clamping surface: Length 120 mm -Prisms/Clamping surface: see photos -Magnet: can be switched on and off -Dimensions: 120/75/H105 mm -Weight: 4.5 kg

Bending tool, die, lower knife, lower tool, prism tool -Tool: for press brake -Total length: 285 mm -Width/Height: 100/120 mm -Dimensions: see drawing in the photos -Weight: 23.7 kg

Angle bracket, locksmith square, flat angle, control angle -Flat angle: Leg length 190 x 120 mm -Quantity: 1x flat angle available -Dimensions: 190/120/H5 mm -Weight: 0.3 kg

Speed control unit, speed controller, controller, motor controller, motor control, motor controller -Manufacturer: Oriental Motors, Motor control unit Motor controller -Type: BMUD 120-C2 -Quantity: 1x controller available -Dimensions: 135/60/H100 mm -Weight: 0.4 kg

Pappschere - Board Cutter Krause PS 120 Serial-No. 316383 Schnittbreite / Cutting width max. 1200mm Vorderanschlag und Schmalschneider / front gauge and narrow-cut device Anlegeleiste hierauf verschiebbare Winkelanlage / movable angle support Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Clamping bracket, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box -Clamping cubes: heavy-duty version, 4 pieces -Length: 500 mm -Material: Steel -Submission/Price: complete -Dimensions: 500/120/H160 mm each -Transport dimensions: 500/480/H160 mm -Weight: 207 kg

Compressed air filter, fine filter -Connection: 2 inch -Number: 3 filters available Price: per piece

Pappschere / Board Cutter Pappschere Karl Krause Hebelschneidemaschine PS 120 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Pappschere / Board Cutter Krause PS 120 Serial-No. 24089 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Front brush, front sweeper, sweeping roller, sweeping brush -Suitable for: Iseki Hako and other tractors -PTO drive -Three-point recording -hydraulic: swiveling -Broom width: 1200 mm -Weight: 140 kg

Machine vice, sturdy vice, drill press vice -Jaw width: 170 mm -Clamping depth: max. 120 mm -Dimensions: 480/170/H130 mm -Weight: 30 kg

Machine almost unused Pressure: 60.0 t Square steel: 35.0 mm Technical specifications Pressure: 60.0 t Square steel: 35.0 mm Angle steel: 120x120x12 mm Round steel: 40.0 mm Punching cross-section in sqmm: Ø28 in 15 / Ø38 in 11 mm Projection: 220 mm Flat steel: 200x20 / 300x15 mm Y0798Jol Knife length: 317 mm Oil capacity: 45.0 ltr. Working height: 940 / 1140 mm Stroke rates per minute: max. 26 Working stroke: 55.0 mm Total power requirement: 4.0 kW Machine weight approx.: 1425 kg. Dimensions HxWxD: 1510 x 590 x 1570 mm

SPECIFICATIONS: Burning capacity Kcal/h: 150,000 Usual yield Kcal/h: 120,000 Air flow m³/h: 8,900 Electrical power of the fans KW: 2.9 Burning wood and legally permissible solid fuels. Weight kg: 615

plate thickness: 4 mm blade length: 150 mm cutting angle: 30-120 ° Table dimensions: 1000x650 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machine vice, sturdy vice, drill press vice -Jaw width: 155 mm -Clamping depth: max. 120 mm -Dimensions: 550/300/H160 mm -Weight: 38 kg

The deep hole drilling machine is in very good condition! Deep hole drilling machine type TBM 120-2000 BTA drilling system Drilling range full drilling 30-130 mm Max. boring 200 mm B8Uwbfcphz Max. drilling depth 2000 mm Drilling spindle box with two-stage gearbox electr. Switchable. Optionally rotating / standing tool Main spindle box ( tailstock ) with two-stage gearbox electr. switchable Tailstock with counter-rotation Optionally with or without counter-rotation Hydr. Cheek chuck We will be happy to send you more pictures on request. We also see ourselves as a competent partner in the field of deep hole drilling in contract work. We would be happy to make you an offer!

There is a used, refurbished Diosna spiral mixer SP 120 D (for max. 120kg dough / 75kg flour) for sale. The spiral mixer is in very good condition and runs quietly. The machine has a stainless steel boiler, a stainless steel spiral, is mobile, has 2 timers and 2 speeds. A video can be sent on request. Price on request.

As good as new chiller (built in 2019) air + water-cooled. Ready to use

plate thickness: 3 (VA), 4 (ST 40) mm cutting angle adjustment: 30 - 120 ° cutting length: 200 mm throat: 300 mm table height: 900 mm work stroke: max. 40 mm no. of strokes: max. 40 Hub/min Punching capacity: 125 kN punch diameter: max. 105 mm total power requirement: 4 kW weight of the machine ca.: 20 t dimensions of the machine ca.: L 1,5x B 1,3 x H 1,38 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max. in kg: 2000 kg Gripping range: 1050-1200 mm Suspension: . 0 weight: 180 kg weight max.: 2 t clamping width: . mm total power requirement: . kW weight of the machine ca.: . t dimensions of the machine ca.: . m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

frequency monitor, speed and frequency monitor, frequency monitoring, frequency monitoring -Type: FW4-2-120-400-1 -Un: 120 VAC -Fn: 400 Hz -Number: 1x frequency monitors available -Price: per piece -Weight: 0.8 kg

Tires, solid rubber tires, forklift tires, complete wheels -Manufacturer: Kowalit, solid rubber tire with rim -Tire size: 18x7-8 Rim 4.33R-8 -Quantity: 1 piece available -Dimensions: Ø 420 x 160 mm -Weight: 19 kg

Tires, solid rubber tires, forklift tires, complete wheels -Manufacturer: Vorwerk, solid rubber tire with rim -Tire size: 120 x 200/310 KF.OG -Hub bore: Ø 80 mm -Bolt circle: Ø110 mm x 15 mm -Quantity: 1 piece available -Dimensions: Ø 310 x 135 mm -Weight: 15 kg

Tires, solid rubber tires, forklift tires, complete wheels -Manufacturer: Vorwerk, solid rubber tire with rim -Tire size: 120 x 410/550 -Hub bore: Ø 68 mm -Bolt circle: Ø110 mm x 18 mm -Quantity: 1 piece available -Dimensions: Ø 550 x 120 mm -Weight: 33 kg

ARISA S-2-630-240-120-LD mechanical press was built in 2005 in Spain by Arisa S.A. (now Nidec Press & Automation Co. (NP&A)). The machine on offer is an excellent choice for series production of components used in the broadly defined automotive or machinery industry. It enables even the most demanding metal forming operations, such as precise punching and stamping of metal parts. In addition to its standard purpose, depending on the tooling and material feed systems used, the machine can also be used as a transfer press or progressive press. All machining processes are performed with a high press force of 630 tonnes. The drive system, in the form of a flywheel and an eccentric gear, cooperating with two connecting rods, ensures even torque transmission and smooth control of the slider movement. The slider, on the other hand, is guided at eight points using roller guides, which increas ...

NIDEC ARISA S-2-500-240-120-FD mechanical press was built in 2006 in Spain by Nidec Press & Automation Co. (NP&A). It is an extremely versatile press that is used in the series production of components for the broadly defined automotive or machinery industry. It enables even the most demanding metal forming operations, i.e. precise punching and stamping of metal parts. In addition to its standard purpose, with the appropriate tooling and material feeding systems, the machine can also be used as a transfer press or progressive press. All processes are performed with a high press force of 500 tonnes. The drive system of the NIDEC ARISA S-2-500-240-120-FD press is based on a flywheel and an eccentric gear, cooperating with two connecting rods. This solution guarantees even torque transmission and a smooth working cycle. The slider, on the other hand, is guided in multiple points by rolle ...

Description HERSTEL Vertical Lathe VDM 120 Details Year of construction 1998 Control Siemens Sinumerik 840C Flexos Max. turning diameter 1,300 mm max. circulating diameter 1,400 mm (option 1,500 mm) Axis stroke Z/X axis 1,000/1,000 mm (option 1,000/1,500 mm) Dimensions to top edge of spindle 940 mm Main Spindle Bearing Circulation Lubrication 2-speed manual transmission autom. Range switching Main spindle motor 76/115 kW Clamping device diameter 1,600 mm Chuck pick-up centering diameter 790 mm Max. feed force Z-/X-axis 25,000 N Axis speed Z-/X-axis 0.01 - 14,000 mm/min. Disc turret with B-axis Tool holder modular system UTS 50 Main dimensions approx. 6,250 x 3,300 x 4,500 mm incl. documentation

Spiral mixer Diosna Model: SP 120 D kneading machine mobile with brake, 2 timers, 2 gears, Stainless Steel Boiler and Spiral Dough machine with return button Flour dust hood for max. 120 kg of dough, Dimensions: 800 x 1270 mm WxD Connection: 400 V, 16A, 32A-CEE plug Used machine cleaned Option: Maintenance contract Service Package Delivery Instruction & Commissioning Many more spiral mixers in stock!

Spiral mixer Diosna Model: SP 120 D kneading machine mobile with brake, 2 timers, 2 gears, Stainless Steel Boiler and Spiral Dough machine with return button Flour dust hood in silo design for max. 120 kg dough, ( depending on TA ) DGUV V3 tested Dimensions: 800 x 1270 mm WxD Connection: 400 V, 15.8A, 32A-CEE plug Machine 3 months warranty + service Option: Maintenance contract Service Package Delivery Instruction & Commissioning You will find your spiral mixer with us!

Spiral mixer Diosna Model: SP 120 D kneading machine mobile with brake, 2 timers, 2 gears, Stainless Steel Boiler Dough machine with return button Flour dust hood in silo design for max. 120 kg dough, ( depending on TA ) Dimensions: 800 x 1270 mm WxD Connection: 400 V, 6.5 kW, 14A, 32A-CEE plug Machine Option: Maintenance contract Service Package Instruction & Commissioning Warranty Many great spiral mixers in stock!

PART NUMBER: 7458 SPECIFICATIONS - max diameter of the machined pins 120mm - 60mm sleeve installed - 5 additional bushings 40, 70, 80, 90, 100mm - max input material diameter 150mm - min input material length 800mm - max machining allowance per side 15mm - knife head drive motor 18.5kW - 4 types of speed feed + forward/reverse - feed motor about 1.1kW Successively: - 3 toothed pulling shafts - 3-knife head - 3 smooth pulling outhands - dimensions length/width/height 3060x1240x1400mm - weight about 1800kg ADVANTAGES – Polish production – 3-knife head – additional bushings included – used turning machine, very good condition Net price: 36900 PLN Net price: 8581 EUR depending on the price 4.30 EUR (Prices may change with higher fluctuations)

Key data: 1200 mm, 141 , 35

Screw diameter: 35 mm Stroke volume: 154 cm³ Injection weight in polystyrene: 141 g/hp Injection pressure: 2,177 bar Clamping force: 120 t tie-barless Tool installation height min.: 300 mm Opening distance: 500 mm CONTROL: CC200 Screen text: german / german Operating instructions: german / german incl. ERC 23/1-F robot, with integrated storage belt Pump drive power: 15kW Total connected load: 24.2 kW Total weight: 7,300 kg Dimensions L x W x H: 4.4 x 1.5 (+0.8) x 2.0 m m m m Payment terms: 100 % before taking over the machine, net only

Diosna Spiral Mixer Type: SP 120 D 2 analogue timers 2 speeds Spiral stainless steel Stainless Steel Boiler Flour dust cover for 75kg flour or 120kg dough on castors with brakes 380V 50Hz Overhauled and repainted Height: 125cm Width: 85cm Depth: 130cm