128,877 used machines on RESALE, but how to find them? Machine Search
Moving steady rest, moving steady rest, steady rest, lynette -Max. Passage: Ø 120 mm -Edition: ball bearings -Hole spacing: 350 mm -Tip height: 210 mm -Drawing with the photos -Dimensions: 395/85/H400 mm -Weight: 14 kg
120 m pallet rack Galler New & used goods very good condition, see pictures. Height 5 m Depth 110 cm, blue Capacity 12 tons Beam length 2.95 m yellow Carrier with ballast /compartment 2550 kg Negotiation price: € 14.990,-- net from stock Offer consists of: + 41 pcs. frame pre-assembled, depth 110 cm, height 5 m +240 pcs. beam, length 2.95 m, 2550 kg ballast/compartment +480 pcs. Suspension locks + 82 pcs. concrete anchors Load plates, documents, etc. are a matter of course. Further accessories can be found in the accessories catalogue. Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. Further information on request. Constantly over 5000 linear meters of pallet racking from numerous manufacturers. (Changes and errors in the technical data, information and prices as well as prior sale res ...
Screw stand, screw stands, clamping devices, Atlas screw stand, threaded screw stand, clamping tool, threaded support, -Adjustment: via trapezoidal thread -Adjustment range: 120 - 175 mm -Price: for all 2 pieces -Weight: 4 kg
Profile steel knife, shearing tool, cutting tool, cutting tool, punching tool, punch, punching die, punching punch -Shearing tool for channel steel: 120 mm -Type: 441215124901 -Type: 441215124902 -1x dimensions: 215/205/H30 mm -1x dimensions: 210/220/H30 mm -Weight: 19 kg
-Spiral mixer Boku SK 120 AK -Manufacturer: Boku -Type: SK 120 AK -without boiler - Machine is for kettle 120 kg dough -with 2 automatic timers - with flour dust safety cover -2 speeds
-Spiral mixer Diosna SP 120 D -Type: SP 120 D -mobile -for max. 75kg flour or for max. 120kg dough -with 2 automatic timers -Boiler diameter 75cm -Boiler capacity approx. 180 liters -Machine mobile on castors with a swivel castor -Locking by 2 brakes -Spiral and kettle made of stainless steel -400 volt frequency 50 Hz -Weight of the machine approx. 550 kg -Boiler capacity: 180 liters
Bending tool, die, upper knife, upper tool, deer foot tool, deer foot tool for press brake -Tool: for press brake -Tool radius: mm -Dimensions: 60 x 120 mm -Length: 415 mm -Weight: 10 kg
Spiral Kneader Dough Machine Diosna Model: SP 120 A with extendable tank wagons Kneading machine for max. 120 kg dough Cover with timer and 2 gears Lifting and lowering via control Connection 400V, 16A-CEE plug Used machine for export More spiral mixers in stock!
Technical data of the pallet rack crossbeam: Shelving system: SSI Schaefer Type: PR 600 The scope of delivery includes: 01x Pallet rack crossbeam, second choice Material colour: RAL 5010 blue Box profile: 120 x 40 mm Truss Type: TRV1-290-124-30 CE Agraffe: 5 HK (hook) Clear width: 2,900 mm max. load per pair of trusses 3,100 kg, with the same weight. Distributed Load 02x Locking pins, new Finish: sendzimir galvanized To secure the longitudinal members against unintentional lifting Note: The trusses are as good as new, but will be offered as second-choice trusses. Due to the storage, scratches or paint chips may exist. General information about the product: This item is available for pickup only. A further desired transport or dispatch of this article is associated with additional costs, which can be requested separately depending on the pla ...
Rotary drive, actuator, actuators, gear motor, rotary valve, pneumatic cylinder actuators -Actuator for: gate valves, locks, ball valves ... -Construction: hollow shaft -Diameter hollow shaft: 120 mm -Number: 3x drives available -Price: per piece -Dimensions: 1700/500/H650 mm -Weight: 450 kg
Key data: 6 mm
Type : K 30 – 120 Specifications: Sheet thickness 6 mm at 400 N/mm² 4 mm at 600 N/mm² Cutting length 200 mm Angle adjustment from 30 - 120 ° Drive power approx. 4 KW
We sell a refurbished Diosna SP120D spiral mixer.
Diameter: 710 mm Number of teeth: . St. Width of teeth: 6 mm Bore: 80 mm : 120 mm Thickness: 5 mm number: 30 St. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Control: Siemens 840 C Max. turning diameter: 1300 mm Max: Circulation diameter: 1400 mm Axle stroke: Z-1000 mm X-1500 mm Dimensions to top edge of spindle: 940 mm Bearing Ø in front bearing: 710 mm Max. speed: 500 rpm Max. torque: 30 000 Nm Main spindle motor AC max.: 100/40% ED 76/115 kW Chip diameter: 1600 mm Feed intake/centeringØ: 790 mm Max. feed force Z/X axis: 25000 N Axis speed Z-X-axis: 0.01 – 14000 mm/min Z-X-Axis Displacement Measuring System: Angle Position Sensor/Linear Measuring System Tool carrier: Disc turret with B-axis Tool holders: Modular system UTS 50 Machine weight: 30 000 kg The machine is still energized. Viewing possible at any time by arrangement.
Circular vibrating screen, brand: Roto Sieve, diameter: 1,120 mm, power: 3 KW (4 hp), in stainless steel. Ready to get started? Contact us directly! Send us a WhatsApp message to (+34) 647 590 257 or an email to infogester.es for personalized advice.
Tailstock, counter bearing for dividing head, dividing head -Peak height: 120 mm -Height: adjustable -Recording: MK2 -Drawing with the photos -Dimensions: 170/100/H130 mm -Weight: 6.4 kg
AvK Synchronous Generator DIG 120 h/4 1370 KVA 10500 V 75 A 50 Hz, 1500 rpm. Accessories: - 2 sets Winding PT100 - DM110 Digital Regulator NEW Condition (NEW)
Moving steady rest, moving steady rest, steady rest, lynette -Max. Passage: Ø 120 mm -Edition: gray cast iron -Hole spacing: 135 mm -Tip height: 145 mm -Drawing with the photos -Dimensions: 370/280/H90 mm -Weight: 10 kg
Moving steady rest, moving steady rest, steady rest, lynette -Max. Passage: Ø 120 mm -Edition: gray cast iron -Hole spacing: 135 mm -Tip height: 145 mm -Drawing with the photos -Number: 3x bezels available -Price: per piece -Dimensions: 370/280/H90 mm -Weight: 10 kg
Kneading Machine Spiral Kneading Dough Machine Model: Spiralo 120 A sophisticated technology ... already proven many times over! LED control with program control 2 speeds + 1x boiler counter-rotation, 3 timers Doughs from 9 to 120 kg / 6-80 kg flour Flour dust hood with protective circuit Stainless steel boiler and spiral Floor-standing machine with base plate 1 extendable tank car DGUV V3 tested Connection 400V, 9.75 kW, 32A-CEE plug Dimensions: 800 x 1650 x 1340/1850 mm, WxDxH TOP quality and price in one machine! New machine with 24 months warranty + service package Option: Additional tank car 120 Soft starter Maintenance contract We have a wide range of spiral mixers in stock!
120 mm cold feed pen convert-extruder, GE 120 SC, make Berstorff, output capacity up to 1,000 kg /h as a power extruder with strip spray head, complete rebuild mechanically and electrically in 2024
used spiral mixer Boku SK 120 AK extendable, overhauled, for 120 kg dough per kettle, 2 timers, with 1 stainless steel kettle, if required with up to 2 other kettles for 3.500€ each, stainless steel spiral, 7.9 kW, 18.5 A, 400 V, 50 Hz, mesh no. 10287
Telescopic spring spindle guard CNC PLC -Type: TF 050-2100-120 V/H -Length: 2100 mm -Diameter: Ø 120 mm -Weight: 4.5 kg
SPECIFICATIONS max. sanding length mm: 1200 08 Spindle Hp 3.0 01 Engine (hydraulic pump) Hp 3.0 02 Motor Hp 1.5 for rotating brushes Complete with loader Control via 01 copy device in the upper part of the machine Hydraulic drive
Heating, gas and oil burners, burner control, burner flap control, flue gas flap control -Burner control: Flap control burner -Type: unfortunately no type designation -Shaft: Ø 12 x 25 mm -Hole spacing: 50/65 mm M6 -Dimensions: 120/120 / H140 mm -Weight: 1.5 kg
used
Galli LVG 120 edge sander Grinding height 240mm Work surface length 1200mm Sanding unit tilting at an angle of -20/+20° Mechanical Oscillation 4kw main motor
Automatic controlled guillotine cross knife Consistent high throughput Chamber length: 620 mm Chamber cross section: 120 x 120 mm
Cooling water pump, centrifugal pump, water pump, coolant pump, drilling water pump, submersible pump, switching pump -Cooling water pump: with cooling water reservoir -Pump: Manufacturer Elpu Type N 120 -Power: 0.085 kW -Speed: 2800 rpm -Dimensions: 570/540/H370 mm -Weight: 24 kg
Tie rod cylinder, hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, press cylinder -Manufacturer: Hänchen, hydraulic cylinder type 120 10100-01 -Piston: Ø 60 mm -Piston rod: Ø 30 mm / M24 x 1.5 -Stroke: 50 mm -Max. pressure: 150 bar -Dimensions: Ø 95/270 mm -Weight: 9 kg
plate thickness: 3 mm pressure: ? t total power requirement: 3,5 kW weight of the machine ca.: 1 t dimensions of the machine ca.: 1,3 x 0,9 x 1,1 m No. 3549 Notching machine BOSCHERT K 30 / 120 MINI No. 1 Working area: Table 800 x 450 Drive: 3,5 Foot switch Table 800 x 450 mm with T-slots 45° / 90° / 180° swivel 120° (2 x60°) Space requirement approx. 1300 x 900 x 1100 mm Weight approx. 850 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube, prism block -Prism block: for marking plate, clamping plate, straightening bench ... -Prism width: 100 mm -Dimensions: see photo techn. drawing -Dimensions: 250/120/H63 mm -Weight: 10 kg
Water pump, new suitable for MAN D2842, cf. original MAN number: 51.06500.6470
Control: Siemens 840 D powerline Accessories: Tool holder bar loading magazine Fully functional and still under power, can be visited at any time
It is a used, reconditioned Diosna mixer S 120 Plus (for max. 120kg dough / 75kg flour) for sale. The machine is in very good condition and fully functional. The mixer has a stainless steel bowl, stainless steel kneading arm, a flour dust cover, two speeds and is mobile. The machine has a new control system with two timers. A video can be sent on request. Price on request.
Clamping angle, clamping aid -Clamping angle: for workpiece clamping -Wall thickness: 41 mm -Groove width: 25/22 mm -Dimensions: 150/120/H218 mm -Weight: 9.7 kg
Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller track, carrier rollers -Conveyor roller: transport roller with bearing block and drive wheel -Diameter roll: 130 mm -Transport width: 1200 mm -Sprocket: Ø 165 mm -Total dimensions: 1365/166/H166 mm -Weight: 28 kg
6-sided packaging machine from the manufacturer Mac Due, model: Maxi 120/A and integrated shrink tunnel T.150-80 R. suitable for dimensions: 1000 x 1700 x 500 mm. Dimensions complete system: 11245 x 2170 x 2460 mm incl. extensive documentation Viewings possible at any time by arrangement.
Spiral mixer Diosna Model: SP 120 D kneading machine mobile with brake, 2 timers, 2 gears, Stainless Steel Boiler and Spiral Dough machine with return button Flour dust hood for max. 120 kg of dough, E-system NEW / DGUV V3 tested Dimensions: 800 x 1270 mm WxD Connection: 400 V, 6 kW, 16A, 32A-CEE plug Used machine overhauled with 3 months warranty + spare parts service Option: Maintenance contract Service Package E-Box We have a wide range of spiral mixers!
The facility is an exhibition facility or test facility in an absolutely new condition. The plant was built in 2024 for the filtration of cooling lubricants in tool grinding: oil + carbide. Filtration is carried out with the help of 61 filter cartridges located in a cylinder housing. The dirty oil is pressed through the filter surface and runs through the inside of the filter into the clean container. The filter works in fully automatic mode. The filter pressure is monitored during the filtration process and as soon as the filter cake has been formed and the pressure increases, the filter is backwashed with compressed air. Then the filtration process starts all over again. The filtration system can be directly connected to the grinding machine, lapping machine, honing machine, etc. Filtration is carried out without consumables, as the filter is backwashed (filter flow, etc.). Th ...
Used spiral mixer DIOSNA, type: SP 120 F/T -Refurbished- - For 120 kg of dough or 75 kg of flour - Kettle and kneading arm made of stainless steel - With stub cover - With digital control - Condition: Very good, overhauled - 6 months warranty The machine can be viewed and tested by appointment.
Turning Parts Grinding Machine OMA COSBO 120 Working length 1200mm Two sanding units Polishing brushes with oscillation Work after the copy
Bending tool, die, upper knife, upper tool, straight tool -Tool: for press brake, 9 pieces -Tool angle: 35° -Dimensions: see drawing in the photos -Dimension: 26 x 120 mm -Total length: 835 mm / 1x 400/170/100/50/40/30/20/15/10 mm each -Total weight: 11 kg
Bending tool, die, upper knife, upper tool, straight tool -Tool: for press brake, 5 pieces -Tool angle: 35° -Dimensions: see drawing in the photos -Dimension: 26 x 120 mm -Total length: 1615 mm / 1x 670/465/250/170/60 mm each -Transport dimensions: 720/220/H50 mm -Total weight: 24 kg
Globoidal cam gears, indexing, oscillator indexer, index gear -Manufacturer: Manifold, Transmission Clutch Indexing -Type: V-1-C 5 120 -Shaft: Ø 48 x 145 mm -Indexing angle: 120° -Number of stops: 5 -Dimensions: 400/385/H395 mm -Weight: 151kg
Lifting kneader Diosna Kneader extendable Model: S 120 A for max. 120 kg dough Stainless steel kettle and kneading arm Dough machine with flour dust hood 2 tank cars, 180 litre boiler 2 gears, with protection circuit Timer, EMERGENCY STOP DGUV V3 tested Approx. dimensions: 900 x 1000 x 1400 mm, WxDxH Connection 400V, 16A-CEE plug Used machine overhauled with 6 months warranty Option: Maintenance contract E-Box Service Package More TOP Lifting Mixers in stock!
Machine vice, clamping claws, clamping jaws, stable clamping jaw, stable clamping jaw, pull-down clamp -Manufacturer: WILA, stable clamping jaw height adjustable -Clamping jaw: 120 x 45 mm -Clamping height: 85 - 105 mm -Groove width: 28 mm -Dimensions: 240/120/H90 mm -Weight: 10.6 kg
Pipe vise, pipe stand, pipe vise, plumber vise -Pipe vise: foldable -Max. clamping range: up to Ø 120 mm -Dimensions: 250/80/H435 mm -Weight: 9.6 kg
power converter, power supply, power pack, switching power supply, power supply module, DIN rail power supply -Manufacturer: Mean Well, switching power supply DIN rail type WDR-120-24 -Input: 200-500 V AC 50/60 Hz 1.4 A -Output: 24 V 5A -Dimensions: 130/40/H125 mm -Weight: 0.6 kg
maximum number of results exceeded
please refine your search
