ba 120 used for sale

Generator – ABB AMK 500L4A BATH Manufacturer: ABB Rated Power: 2,020 kW Voltage: 690 V Current: 1,522 A Frequency: 50 Hz Power Factor: 1.0 Speed: 1,680 rpm (max 2,450 rpm / 2 min) Protection Class: IP54 Insulation Class: F Weight: 5,010 kg Year: 2005

AMUT TWIN SCREW EXTRUDER BA86 (photos before reconditioning), n.2 x 86 mm diam. counter-rotating screws (24 L/D with 4.440 worked hours), Siemens d.c. 31 kw drive, N.1 vacuum degassing pump 1,5 kw, Throughput rate up to 180 kg/h with PVC, N.6 heating areas, N.4 cooling areas, Manuals, CE, drawings available, The machine is offered reconditioned, options available: profiles downstream equipment, capacity: 180 kg/h, conditions: reconditioned, type: for PVC

serial number: 1296 : ja changer: ja fach documentation: ja control: Heidenhain 426 weight of the machine ca.: 6 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

n°1 Balacchi BR4SSB PVC welding machine Year 2004 -n°1 Balacchi BR12PT PVC welding machine year 199

Height=0.9 m, Overall length= 0.85 m, Overall width= 1.68 m, Net weight= 4 kg,

Height=3.25 m, Overall length= 1.68 m, Overall width= 3.7 m, Net weight= 2400 kg,

Height=1.09 m, Overall length= 0.72 m, Overall width= 0.91 m, Net weight= 2 kg,

Power : 68kW at TC -25°C (ΔT 6 K) Temperature range : -40°C to 55°C  Flow rate : 90000 m³/h Slats : 495 m² Volume : 117 litres Weight : 923 kg with 6 fans 630mm, with 2 refrigeration circuits at 50% each with defrost heater see nameplate Only been in operation for 1 year, condition as good as new 2 pieces in stock Price on request

Flame and plasma cutting machine Bach Thermocut BJ 2008

For sale here is the Bauer Mini - Verticus 3 300bar breathing air compressor with Bauer B-Kool refrigerant dryer and a storage tank 3 x 50l 300bar. 85 hours of operation. Comes from a research facility and is very rarely used.

BUFFER SILO 15.000 lt. (or 8.000 - 12.000 - or bespoke), barrel Ø 2,2 mt. - height 3.0 mt., overall height 5,23 mt, made in electro-welded carbon steel sheet, sturdy supporting structure, internal rotor with spiral and agitator arms, inspection hatch on barrel wirh safety devices, bonfiglioli gearbox, power 3 kw electric motor, transmission with elastic coupling, finish painted externally with rustproofing and enamel, CE compliance + instruction manual, installed power - used power in work: about 60-65% : 3

Balestrini Junior Longitudinal Copy Milling Machine, Werkstrück length: 1,700mm Double milling cutter for copying milling work with stencil CE Year of manufacture 2001 PLC control defective.. needs to be renewed. Error! No release from the machine. English: Balestrini Junior Dual Copy Profile Shaper Routing Machine Part-length: max. 1700mm 2 shaper machines Template for workding machine does not working! PLS/ PLC Control broken. Machine does not start working. Engine works.

Key data: 400 mm, 200 mm

Ziersch & Baltrusch FS 2040 - Surface Grinding Machine - Magnetic clamping plate 400 x 175 mm -Hydraulic - Coolant device -Bandpass filter - Automatic transverse stroke not functional - Year of construction 1988 Specifications - Grinding area: 400 x 200 mm - Height adjustment: 410 mm - Magnetic table: 400 x 175 mm - Grinding wheels: 200 x 25 x 51 mm - Grinding wheel speed: 1420 / 2840 rpm - Motor power: 1.5 kW - Dimensions WxHxD: 1700 x 2100 x 1500 mm - Weight: approx. 1100 kg

"EIAA x BATES :: Certified Preowned" We can offer you permanently revitalized filling systems for all areas of application. OFFER from a customer: Wagner filling line (screw packer) for valve bags with internal or external valve, made of paper / PE Machine was completely overhauled in 2025: New pneumatics New electrics New control cabinet with new components, e.g. control system (Siemens LOGO!) - manufacturer-independent New software - manufacturer-independent New weighing electronics (B+L dataPond 3F, high-speed, legal-for-trade) Parts made of stainless steel that come into contact with the product (product flap, pressure chamber, filling tube) Filling pipe for approx. 145mm valve width - conversion to other valve width possible if necessary Filling tube tapered to make it easier to attach the empty bags Steel construction newly powder-coated Schematics, diagrams n ...

Kleencare vapour abrasive blasting machine Manufacturer: Kleencare Year of Make: 1992 Type: Vapour Abrasive Blasting Machine Working pressure: 6 bar Tank volume: 100 litres Use: Cleaning and surface treatment by wet blasting Features: Pressure blasting process with water-air mixture for gentle removal of dirt, paint and oxidation layers

Ucon vapour abrasive blasting machine Manufacturer: Ucon Year of Make: 2008 Type: Vapour Abrasive Blasting Machine Working pressure: 6 bar Tank volume: 50 litres Application: Wet blasting for cleaning, paint stripping and surface preparation Features: compact blasting machine with water-air system, suitable for sensitive materials

Offer 25375 Specifications: - Working range / cutting length for approx. 5 m raceway approx. 3000 mm - Working range / cutting width approx. 1500 mm - Control BACH - Track gauge approx. 1900 mm - 1 plasma burner with height adjustment - Plasma source KJELLBERG Hi FOCUS 160 i - Cutting current at 100% ED 10 - 160 A - Cutting range steel approx. 5 - 50 mm - Cutting range aluminium approx. 5 - 35 mm - Cutting range stainless steel approx. 5 - 30 mm - Connection 400 V / 35 kVA - Extraction table with extraction system make TEKA, type Filtercube 4 H, built in 2010 - Weight approx. 4 T - Space requirement system approx. L 7.5 x H 1.5 x D 2.4 m - Space requirement for extraction approx. L 1.5 x H 3.5 x D 1.5 m

Bacciottini AF Speed creasing machine; Condition as is, is sold as a spare parts carrier; 3x grooving tool, 1x perforation tool. Creasing machine Bacciottini AF Speed; condition as is only for spare parts; three tools for creasing and one tool for perforating.

Bacciottini Pit Stop Mini Creasing Machine; cleaned and tested; Max. sheet format 350x300mm, min.100x150mm; Paper weight 80-400g; 3 tools (2xgrooving tool, 1xperforation); Program memory. Creasing machine Bacciottini Pit Stop Mini; cleaned and checked; max.paper size 350x300mm, min.100x150mm; paper weight 80-400g; three tools(2 creasing, one perforating); Program Memory.

A complete PS foam extrusion line (capacity: 350kg-400kg/h) is available. 1) 7x dosing units K-Tron Switzerland and Coperion, main components: 3, side components: 4, capacity: 350kg-400kg/h. 2) Primary extruder Battenfeld, year of manufacture: 1998, screw diameter: 120mm, screen changer: Gneuss, double piston pump: LEWA. Including gas injection. 3) Secondary extruder, screw diameter: 150mm/33D. Including unused old die and a coextruder Kühne with 50mm screw diameter. 4) Oil-heated Sunwell round die. 5) Calibration unit Dorn, knives: 2, films: 2, film width: 1080mm. 6) Take-off unit Gloenco Double S Haul-Off. 7) PS film winder, positions: 4, simultaneously operated positions: 2, winding speed range: 10m-30m/min, roll weight range: 150kg-300kg, roll length range: 500mm-800mm. Including discharge with ionization. Documentation available. An on-site inspection is possible. This line is sold ...

Lohberger Stove Oven Water Bath Brainmarie Salamander Water bath E.WS09EBM2.1 (2.3 kW) 4 burner stove E-4/850 (17 kW) 2 burner stove E-2/850 (6.8 kW) Oven eloma SA1 Salamander (2.1 kW) Faucet Metrics: Width: 2250 mm Depth: 850 mm Height: 750 mm Backsplash: 60 mm Hot plates: 300 x 300 mm Water bath: 510 x 610 210 mm More items - new and used - can be found in our shop! International shipping costs on request!

Battery Production Facility Manufacturer: Aumann Year: 2016 Condition: Used – good working condition 1) Banding System for Battery Cells NMC/LTO Technical Data: 20,000 battery modules NMC (14 cells each) per year, cycle time 22.2 sec/cell Includes: - Control cabinet with Siemens control system - Modular protective design (Module 2) - Banding station A1023 for NMC (Samsung) and LTO (Toshiba) - Cleaning system in film feed area - Tool set for NMC (14 cells) 2) Assembly System for Battery Modules NMC/LTO Technical Data: 20,000 battery modules NMC (14 cells each) per year, cycle time 31 sec/module Includes: - Control cabinet with Siemens control system - Baseplate assembly and module housing - Cleaning and testing stations - Electrical inspection (DMC scan + NIO selection) - Housing assembly, end-of-line testing - Laser cell welding system with shielding - Tool sets for NMC (14  ...

weight max.: 3 t clamping width: 480 / 880 mm adjustment range - horizontal: 400 mm adjustment range - vertical: 600 mm total power requirement: - kW weight of the machine ca.: 0,3 t dimensions of the machine ca.: 0,60,41,1 m Shipping weight: 300 kg Packing: ca. 1,2 x 0,7 x 0,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Göpel electronic, BasicLine AOI system, year 2016 According to consultation with the manufacturer, it is possible to convert the system to a 3D/360° system. After conversion, the device is equivalent to a new device and comes with a two-year warranty.

Cutter Manufacturer: Baader Stainless steel Capacity: 60 liters 6 knives

plate width: 125 mm plate thickness: 2 mm straightening feed: 5-30 m/min total power requirement: 1,5 kW weight of the machine ca.: 460 kg dimensions of the machine ca.: m - Belt infeed height: 1,250 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hitachi excavator style:, suitable for FH150 & FH180, Short style: € 500,- excl. 20% VAT, Long style: € 750,- excl. 20% VAT

Yanmar SV60-A excavator, Technical specifications:, - Year of construction: 2020, - Transport weight: 5,560 kg, - Operating weight: 5,635 kg, - Rubber track width: 400 mm, - Digging depth: 3.91 m, - Engine power: 32.6 kW, - Displacement: 1,995 l

for 6 - 10 t excavator

Construction site conainer 20 ft, 6x2,4m

50,000 litre underground tank - brand new - according to DIN-EN 12285-1, single-walled, raw inside, professional insulation on the outside. Dimensions: D = 2.50 m - L = approx. 10.70 m The tank has a DN 600 manhole with dome cover, screws and seal. Containers from the factory, freely charged. On request, the tank can be completely equipped with a fire water suction connection, the tank then meets the requirements of DIN 14230 - underground fire water tanks: Extinguishing water suction connection / suction line made of stainless steel V2A - according to DIN 14230 - consisting of: - 1 pc. suction pipe DN125 made of stainless steel - V2A, with Storz A fixed coupling and Storz A blind coupling, - 1 pcs DN100 vent pipe with stainless steel hood - V2A, - 1 piece anti-vortex plate mounted on suction line, - 1 sign "Extinguishing water extraction point", - 1 pc. soun ...

1 gebr. Boiler -------------------------------- Manufacturer : LOOS Gunzenhausen Type : UL-S 1250 Heating surface approx. : 25 sqm Capacity : 1,000 kg/h Operating overpressure : 13.0 bar Increased test pressure : 24.7 bar Ab. Operating temperature : 195° C Water content up to NW approx. : 1.785 l Water content full approx. : 2.320 l CE marking : CE 0036 Year of manufacture : 2006 equipped with Weishaupt gas/oil burner GL5/1-D/ ZMD, separate control cabinet, gas control system, feed water pump, and the existing coarse and fine fittings.

1 gebr. Boiler -------------------------------- Manufacturer : LOOS Gunzenhausen Type : UL-S 1250 Heating surface approx. : 25 sqm Capacity : 1,000 kg/h Operating overpressure : 13.0 bar Increased test pressure : 24.7 bar Ab. Operating temperature : 195° C Water content up to NW approx. : 1.785 l Water content full approx. : 2.320 l CE marking : CE 0036 Year of manufacture : 2006 equipped with Weishaupt gas/oil burner GL5/1-D/ ZMD, separate control cabinet, gas control system, feed water pump, and the existing coarse and fine fittings.

1 gebr. Boiler --------------------------- Manufacturer : LOOS Gunzenhausen Type : U-HD 1250 Heating surface approx. : 20 m² Boiler capacity max. : 1.250 kg/h Operating overpressure : 10.0 bar Increased test overpressure : 18.5 bar Water content at NW approx. : 993 l Water content full approx. : 1.365 l Year of construction : 2008 CE mark : 0036 equipped with Weishaupt gas burner G7/1-D, ZMD, 300-1,750 kW, 15-500 mbar, gas control section, Control cabinet with touch panel, feed water pump, ECO and the existing coarse and fine fittings.

1 gebr. Boiler ------------------------------------ - mounted on frames - Manufacturer : LOOS, International Type : UL-S Capacity : 5,000 kg/h Operating overpressure : 18 bar Steam temperature max. : 204°C Year of manufacture : 1993 equipped with Weishaupt gas burner G50/2-A, ZM, gas control section, separate control cabinet, feed water pump, and the existing coarse and fine fittings.

Manufacturer: NanoFocus Model: Usprint 3D Inspection System with Bauman Year of Manufacture: 2014 Condition : Excellent Control Operation Voltage: 24 / 400 V Nominal Current: 17.3 A Electricity Type: 3-phase Frequency: 50 Hz Compressed Air: 6 bar Supply Line Fuse: 25 A (slow-blow), 16 A (fast-acting) Nominal Power: 4.6 kW CE Marked Find more here - / Contact us at -

Manufacturer: Bollegraff Type of Machine : Press Baler 100ton force Find more here - / Contact us at -

I-BAR SHRINK WRAP SEALER Mercier Vacuum Mixers Model No.: ME-800IP Serial No. 18110161

gebr. Boiler ------------------------------- - mounted on frames - Manufacturer : LOOS, Gunzenhausen Type : U-HD Heating surface approx. : 14 m² Capacity : 800 kg/h Ab. Operating pressure : 10.0 bar Increased test pressure : 18.0 bar Water capacity at NW approx. : 748 l Water content full approx. : 1.108 l Year of construction : 1996 equipped with Weishaupt combi burner GL3/1-E, ZMD, 90-630 kW, gas control section, feed water pump, control cabinet and the existing coarse and fine fittings.

Height=1.612 m, Overall length= 1.127 m, Overall width= 0.75 m, Seisukord: Kasutatud Tootja: Baketech Valmistatud: Malta Description Baketech Lintümardaja kahe lindiga lintide kalded reguleeritavad 16A 380V/ 3 kasutatud töökorras

Screw Diameter: 140 mm // Throughput: 900 kg/h

Materials: LDPE, LLDPE, mLLDPE, Metallocene, EVA, EVOH, PA // Film Width (Max): 1800 mm

- Feeder - Digital control - 4 pockets - Perforating modul - Mobile delivery

The machine is in excellent condition. It can reach 9 bags per minute with milk from 3Litres to 25 Litres

max. format 80 x 120 cm Built in 1993 automatic destacker max. stacking height 100 cm Delivery date: immediately from stock Price on request. We supply and install worldwide.

1 BABCOCK stenter for woven, roller width 340 cm, working width 320 cm, year 1995, 4 ECON-AIR chambers updated brand new in 2004, gas heated with MAXON burners, horizontal pin and clip chain, J-box entry, foulard, MAHLO weft streightener type RFMC 10-A from year 2001, cooling field, plaiter exit

Inv. Num. : 8801 Type:- Producer: Barnesdril Generated: Parameters: including table

General SKU345S1128 LocationBarneveld MakeBarriquand Type IJS 1x24/1x25x350x2250 37,8 m² No.24059E1 Year of construction1994 Pressure Vacuum possiblecheck Main Features MaterialStainless steel Surface37.8 m2 Size length1970 mm Sizes width261 mm Specified Features - Plate heat exchanger MaterialStainless steel 1.4571 (316Ti) Plate heat exchangerswelded Heating surface37,8 m² CapacityCircuit A: 54,5 Ltr., Circuit B: 60,3 Ltr. ConnectionsDN50, DN100 (2x), DN200 (2x) Max. temperature-30/200 °C Information Total height1 m Weight1030 kg Floorspace3x1,05 mPlate heat exchangersBarriquandHeat exchangers > Plate heat exchangersBrand > Barriquand What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. ...

General SKU301W572 LocationBarneveld MakeWab Bachofen TypeKD15 No.740364 Year of construction1973 Main Features MaterialStainless steel Volume15 Ltr. Motor22 KW Specified Features - Sand mill MaterialStainless steel 1.4435 (316L) Horizontal sand millcheck Capacity15 l Housing dimensions Dia. 220 mm , length 430 mm InletDia. 30 mm OutletdIA. 30 MM Motor22 kW, 3x 500 volt Information Total height1,60 m Weight590 kg Floorspace0,75x1,00 mSand millsWab BachofenMills > Sand millsBrand > Wab Bachofen What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!