126,766 used machines on RESALE, but how to find them? Machine Search
A forming machine Bakel for the food industry, for example for the production of patties, is available. Belt width: 400mm, forming capacity: 50 strokes/min, hopper capacity: 270l, max. forming dimensions X/Y: 370mm/130mm, max. cycle volume: 1.47kg, machine dimensions X/Y/Z: approx. 2500mm/900mm/2600mm, weight: approx. 1200kg. An on-site inspection is possible.
Herma's high-performance labeling machine for lid and side labels. Capacity: 100 labels per minute Round cans were labeled with the Herma (400ml). However, it can also be used for any other cans and bottles. The machine sticks the label all around and also on the lid. The machine therefore has several labeling heads, so that the label is simultaneously labeled all around the can/bottle and is also labeled on the lid of the can/bottle. The machine is in perfect working order. The reason for the sale is the change in the packaging of the product.
Manufacturer: Göpel Electronic Model: OptiCon BasicLine Year of Manufacture: 2011 Type of Machine : AOI System Voltage: 230V / 50Hz Current: 10A CE Marked: Yes --------------------------------------------------------------- Find more here - / Contact us at -
A cutting, creasing, and scoring machine Bahmüller is available. Passage width: 2300mm, min. strip width: 230mm, passage speed: 150m/min, cutting and creasing roller diameter: 127mm, height adjustment: 20mm, table dimensions X/Y: 2600mm/1480mm, cutting width: 2200mm, circular knife outer diameter: 220mm, coarse scoring outer diameter: 200mm, min. coarse score distance 1/2: 60mm/0mm, fine score distance 1/2/3: 28mm/5mm/15mm. Processes: cutting, coarse scoring, fine scoring, scoring with version R, vacuum feed with version V, and ruler insertion with version L. Machine dimensions X/Y/Z: approx. 2850mm/2600mm/1200mm, weight: approx. 4800kg. Documentation available. An on-site inspection is possible.
Key data: 90 , 40 , 510
Air Compressor Atelier Francois CE24A, 510 Nm3/h at 40 bar This three-stage intercooled high pressure compressor was manufactured in year 2008 and the operation was stopped in year 2019 and it was afterwards professionally dismantled. This compressor is very slow speed and it has only two cross-head assemblies, two connecting rods and associated bearings. There is no piston rod packing on 3rd stage, which eliminate sealing against 40 bar. Single acting 2nd and 3rd stage, requiring few valves. Smaller 2nd and 3rd stages are horizontal position to optimize the piston ring life. The delivery includes • AF CE24A high pressure air compressor with electric drive mounted on common base frame • Air-cooled stainless steel 40 bar air dyer with integrated 1-micron filter, dew point alarm and Bekomat drain system, made by Hankison • Horizontal 300 litre hot galvanized 40 bar air re ...
sheet width: 3060 mm plate thickness: 6 mm no. of strokes: 20 Hub/min stroke: 750 mm Motor Capacity: 11 kW oil volume: 160 l weight of the machine ca.: 5.500 kg dimensions: 3860 x 2560 x 1560 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Plunger Pump, High Pressure Pump, Homogenizer, Plumger Piston Pump, Plunger Piston Pump Manufacturer: WOMA Apparatebau GmbH Type: 753.50 max pressure 150 bar Flow rate approx. 175 l/min Engine Power: 55 kW 1500 rpm 380/660 volts 50 Hz Dimensions approx. 1800 x 1000 x 750 mm
CLAMPING FORCE: 150TON PLATEN SIZES: 1295 X 990 DBTB: ROTARY TABLE 1520 MIN MOULD HEIGHT: 300 MOULD OPENING STROKE: 400MM MAX DAYLIGHT: 700MM SCREW DIAMETER: 40MM INJECTION PRESSURE: 2678BAR STROKE VOLUME: 283CM3 SHOT WEIGHT (P/S): 257GR CONTROLS: UNILOG B6 MOTOR: 22KW HEATING CAPACITY: 12.1KW SCREW DRIVE: HYDRAULIC CORE PULLING: 4 AIR VALVES: 1 HOT RUNNER: 8 ZONE INTERGRATED ADDITIONAL: HORIZONAL INJECTION VERTICAL CLAMP
Specifications Brand: Bavelloni Type: PR88 Kind: Flat Poly Grinding Machine Serial number: 02 43 401 Year of construction: December 1995 Weight: Approx. 3,600kg Assets: 16.7 kW/ 400V Air pressure: 7-8 bar Length mm: 7,400mm Width mm: 1,300mm Height mm: 3,300mm Working height: 900mm Transport dimensions L x W x H 4.0 x 2.5 x 2.4 Max speed: 0.5–5 m/min Min.-max. glass thickness: 3–31mm Min.-max. glass size: Min. 50x50mm Number of spindles: 8 spindles State machine: Working disassembled Photos/film available: Photos are of a different but identical machine 02.1.198
Specifications Brand: Baudin Type: 681MB Kind: Flat Poly Grinding Machine Serial number: 409 Year of construction: 1991 Length mm: 5,800mm Width mm: 1,600mm Height mm: 2,500mm Max speed: Adjustable from 0.4 to 4.2 m/min. Min.-max. glass thickness: 3–25 mm Min.-max. glass size: 80×120, up to 3,000×3,000 State machine: Working disassembled, Photos/film available: Photos available 02.1.200
Four fabric inspection machines are available (1) Menzel WOB 1.600mm fabric inspection machine, working width: 1600mm (2) Menzel WOB 3.200mm fabric inspection machine from Hoftex, working width: 3200mm (3) Bauch Maschinenbau CB-WU 380 fabric inspection machine (4) Maag CT 5206-Ah fabric inspection machine. On-site viewing is possible.
used
Container facility consisting of: = 8 pieces of mobile space elements, dimensions 6,058 x 2,438 x 3,000 mm, IH 2,500 mm, 2 pieces of mobile space elements, dimensions 4,891 x 2,438 x 3,000 mm, IH 2,500 mm - with all electronics, heating, kitchen, etc. - Built in 2018 and was used for 4 years gas heating has been installed in the equipment. In addition, there are two air conditioners
Key data: 2 mm, 425 mm, 400 mm
Machining Center (Vertical) CNC TYPE: SW BA25 Control: Siemens 840 C Travel X/Y/Z: 2 x 600 or 1 x 1,800 / 425 / 400mm Main spindle: SK40 / 7,500 rpm /106 Nm / 14kW / IKZ Rapid traverse: 40 m/min Tool changer: 36-speed Dimensions W/H/D: 5,100 / 3,000 / 2,900 mm Weight: 9,500 KG Equipment: Single or two-station with shuttle operation Left side with controlled 4th axle and hydraulic double clamp Right side 2x hydraulic double clamp Separate hydraulic unit for increased clamping pressures under manual clamping Can be reclamped to program-controlled voltage via central hydraulics Conveyor Coolant device with gap filter and high-pressure pump for internal coolant supply Prepared for Renishaw touch probes
Two identical smoking and cooking systems are available. Suitable for the production and refinement of sausages and meat products, poultry, fish, cheese and baked goods, hot smoking, warm smoking, cold smoking, moist smoking, intensive smoking, quick smoking, reddening, sweating, scalding, steaming, cooking, hot air cooking, semi-preservation, baking, roasting and defrosting. Heating capacity: 24kW, connected load: 31.5kW. With operating manual. An on-site inspection is possible.
2008 SAR/KUKA R/SCHS/GR/ETI/UST/MED/FB/HBG/BAS Injection robot Machine was functional before conservation, obsolete robot version, retrofit could not be done. Find more here - / Contact us at -
Height=2 m, Overall length= 2.3 m, Overall width= 1.95 m, Net weight= 450 kg,
Height=1.1 m, Overall length= 0.65 m, Overall width= 0.51 m,
Height=1.26 m, Overall length= 0.55 m, Overall width= 0.75 m, Net weight= 230 kg,
Height=2.13 m, Overall length= 0.92 m, Overall width= 1.22 m, Net weight= 480 kg,
Height=1.65 m, Overall length= 1.4 m, Overall width= 1.1 m, Net weight= 270 kg,
Height=1.55 m, Overall length= 1.15 m, Overall width= 1.3 m, Net weight= 680 kg,
Working width: 3600 mm Working height: 2600 mm Number of cylinders: 5 St. loading dimensions L x W x H: 4400 x 1150 x 2970 mm weight: 3000 kg Schafberger + Sproedhuber Bavaria Frame Press --------------------------------- Machine is overhauled by us before delivery. With automatic pressing cycle + manual control for tenon + slot corner joints. CE-certified version Basic machine in the strongest welded frame construction, with thick-walled special hollow profiles. Guideways for the pressure beams for the press corners in a low-wear machined design. Fast, smooth, manual width adjustment via ball-bearing carriages, fixed in a hole pattern. Height adjustment and pressing via long-stroke cylinders in a single work cycle. Right-side press corners with integrated horizontal cylinders, therefore no vertical positioning of the horizontal pressure cylinders necessary, thus avoiding cylinder collis ...
Height=1.44 m, Overall length= 1.15 m, Overall width= 2.6 m, Net weight= 98 kg,
sheet width: 3060 mm plate thickness: 6.0 mm thickness at Niro-steel: 4.0 mm distance between columns: 3100 mm down holder: 16 Stück no. of strokes: 20 Hub/min oil volume: 160 ltr. cutting angle: 1.6 ° Control: ELGO Number of working hours: ~ 1.100 h total power requirement: 11.0 kW weight: 5250 kg range L-W-H: 3800 x 1940 x 1560 mm from a maintenance workshop with only approx. 1.100 operating hours () Equipment: - electro-hydraulic swing beam shears - ELGO NC control unit for electric back stop Input of target/actual position value possible - NC electro-motoric back stop travel path of back stop X = 750 mm back stop ball screw with no play travel speed 100 mm/sec - electric cutting length limitation cutting length limitation to increase the number of strokes/min. - manual cutting gap adjustment, via eccentric - tip operation with push buttons on the control panel on the left - ...
sheet width: 3060 mm plate thickness: 8.0 mm thickness at Niro-steel: 6.0 mm distance between columns: 3100 mm down holder: 16 Stück no. of strokes: max. 10 - 15 Hub/min oil volume: 160 ltr. cutting angle: 1.6 ° back stop - adjustable: 6.0 - 750 mm Control: ELGO P9521 total power requirement: 18.5 kW weight: 6300 kg range L-W-H: 3900 x 2300 x 1630 mm Features: - Robust electro-hydraulic swing beam shear - ELGO digital display model P9521, for electric backgauge Backgauge travel X = 750 mm Backgauge-free ball screw drive Travel speed 100 mm/s - 1x stable side stop With T-slot, flip-stop, and millimeter scale - 2x stable front support arms - Electric cutting length limiter Cutting length limiter to increase the stroke rate/min. - Manual cutting gap adjustment Centrally operated on the right side stand - Front support plates - Front finger/interference guard - Inching operation with ...
feed pressure: 10.0 bar Effective free air delivery: 700 L/min motor: 400 V 0: 250 Liter weight of the machine ca.: 397 kg. total power requirement: 5.5 kW range L-W-H: 1915 x 650 x 1640 mm Exhibition machine / not yet in use new BOGE SOLID model series ~ List price: 8.848 euros / special price on request Made in Germany Furnishing: - with container and dryer / can be used immediately - Microprocessor control SOLID base control - Network pressure sensor - Belt driven drive system - low compressed air temperature due to effective aftercooler - lying underneath compressed air tank - including cold compressed air dryer automatically working with pre- and post-filter ( mounted ) (also available with 7.5 bar) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
feed pressure: 10.0 bar Effective free air delivery: 1.950 L/min motor: 400 V 0: 250 Liter weight of the machine ca.: 467 kg. total power requirement: 15.0 kW range L-W-H: 1915 x 650 x 1640 mm Exhibition machine / not yet in use new BOGE SOLID model series ~ List price : 13.576 euros / special price on request Made in Germany Furnishing: - with container and dryer / can be used immediately - Microprocessor control SOLID base control - Network pressure sensor - Belt driven drive system - low compressed air temperature due to effective aftercooler - lying underneath compressed air tank - including cold compressed air dryer automatically working with pre- and post-filter ( mounted ) (also available with 7.5 bar) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
feed pressure: 10.0 bar Effective free air delivery: 1.000 L/min motor: 400 V 0: 250 Liter weight of the machine ca.: 410 kg. total power requirement: 7.5 kW range L-W-H: 1915 x 650 x 1640 mm Exhibition machine / not yet in use new BOGE SOLID model series ~ List price : 9.450 euros / special price on request Made in Germany Furnishing: - with container and dryer / can be used immediately - Microprocessor control SOLID base control - Network pressure sensor - Belt driven drive system - low compressed air temperature due to effective aftercooler - lying underneath compressed air tank - including cold compressed air dryer automatically working with pre- and post-filter ( mounted ) (also available with 7.5 bar) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
BAYKAL BPS3006 plasma cutting machine was built in 2020 in Turkey by BAYKAL MAKINA SANAYI VE TICARET A.Ş. The machine is designed for precision plasma cutting of sheet metal and tubes. The machining process is performed on a large work table with a length of 6000 mm and a width of 3000 mm with an extraction system. This system is integrated with an industrial filtration unit, which removes any contamination generated during the cutting process on an ongoing basis. The plasma torch with an anti-collision system and automatic height adjustment is in turn powered by a powerful HYPERTHERM plasma source of the highest energy efficiency. The innovative True Hole cutting technology for mild steel ensures significantly better hole quality than was ever possible with the use of plasma. All this is complemented by extensive equipment, consisting of, among others, an intelligent CNC control and au ...
RBP Bauer ST50 blister punch - offers the possibility to divide any standard blisters into single pocket blisters or pocket groups, blister size max. 145 x 130 mm (BxL), output infinitely variable up to 40 blister per minute, electrics 230V/50-60Hz, Siemens SIMATIC S7-200 with SIMATIC OP3 Operator panel, pneumatic 6 bar, machine dimensions approx. 1100 x 600 x 1400 mm (LxWxH), machine net weight approx. 130 kg, mobile machine on wheels
Our "Basic" pallet wrapper is a semi-automatic stretch wrapper made in Europe, which guarantees absolutely consistent results thanks to up to 10 storable programs and thus offers the safe exclusion of the "human factor". With the electromagnetic brake, the tension of the film can be adjusted to your needs and stored in the programs. As part of the programs, you can also adjust how fast the foil carriages and turntables run. Head windings and foot windings can also be saved for each program. In this way, you can store individual programs for each packing scheme in order to always achieve perfect winding results. With a weight of 260 kg, this model is suitable for loads of up to 1200 kg Our Basic Pallet Wrapper has a 1500 mm turntable and can wrap pallets up to 2000 mm high as standard. Automatic recognition of your pallets (via photocell) is just as much a matter of course as adjustab ...
Inv. Num. : 8644 Type: BSL 204 Producer: Bäumer Created: 1983 Parameters: Max. workpiece dimensions: 2200 x 2200 x 1300 mm Equipment: Vacuum table New motor for the table drive New sensors New control panel GO spirals and nuts for vertical machine movement
pressure: 180 t chamfer lenght: 3110 mm distance between columns: 2600 mm column arm: 410 mm ajustment speed: 100 mm/sec working feed: 10.0 mm/sec return speed: 80.0 mm/sec back stop - adjustable: max. 750 mm stroke: 260 mm dayligth: 460 mm table height: 880 mm oil volume: 210 ltr. operating pressure: max. 240 bar control: DELEM total power requirement: 15.0 kW weight of the machine ca.: 11.200 kg. range L-W-H: 4250 x 2000 x 2800 mm Current new price approx. 85.000 euros Special price on request Features: - Electro-hydraulic CNC press brake - With DELEM CNC control model DA 66W” 2D graphic programming Automatic bend sequence calculation and collision detection High-quality LCD screen (TFT) Swivel control panel, front left - CNC-controlled axes: Y1 + Y2 + X + R + CNC crowning - CNC electric motor-driven backgauge (X axis) with 2x manually adjustable stop fingers - CNC electric mo ...
Equipment: Insulation, agitator,Manufacturer: Bartec rind,Condition: used,Volume: 125,000,Bottom floor: Conical bottom,Design: upright,Stand shape: Stand frame,Insulation: present,Insulation material: PU foam,Diameter inside: 3,850,Diameter outside: 3,965,Cylindrical height: 10,570,Total height: 14,000,Wall thickness underbody: 6,Year of construction: 2000,Technical documents: Drawing,Manhole / dome: in the cylinder, in the top floor (DN 500),Type plate: Yes,Equipment: Ventilation, Spray head,Spout : 125,Remarks: Indicated total height estimated according to drawing Manhole cylinder 510/410 mm
Vertical tank made of stainless steel. On the basis of E. BACHILLER. With railings. Capacity: 30,000 l. Previous use: Milk. Atmospheric. Series No.: 10D700. Dimensions: Diameter: 2700 mm. Height: 7500 mm. Base 1060 mm. Weight: 3360 kg. available
Model: BAS 051. Automatic Flash Butt Welding Machine for Band Saw Blades. Pneumatic clamping. Annealing pyrometer. Inserting bar for blade positioning. UniOp automatic annealing temperature control. Machine cleaned and repainted. Year of manufacture: 2001. Nominal primary voltage: 380 [V AC]. Max. welding rating: 8 [kVA]. Clamping force: 20 [kN]. Forging force: 5 [kN]. Welding ranges. Band saw blades for wood: 6-50 [mm]. Bi-metal bandsaw: 6-41 [mm]. Hoop knives: 6-50 [mm]. Stainless steel bandsaw: 6-30 [mm]. Weight: 600 [kg]. Dimensions (WDH): 135010001700 [mm]. Instructions and packing included.
used
Paper drilling machine Citoborma 490 base year 2018 and Vario: year 2021, 4 spindle, height-adjustable table, in good condition, immediately available If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machine in our house by prior appointment.
Bausano Modular Compact Line , All 7m Lenght + Tilting, Maximal Profile Section 180 x 100 mm,, Maximal Traction Force 10 kN, Maximal Speed 15 m/min, Specifications: Calibrator type BP/2P/ML, Lenght Calibrator Holder 2500 mm, Longitudinal Adjustement 600 mm ( Gear Motor- Traverse Motor 0.37 kW ), Transversal Adjustment 40 mm, Vertical Adjustment 880 / 1130 mm, Cooling Water 12 Connections, Vacuums Pumps 2 x 4 kW, Vacuum 16 Connections, Haul-off unit type TNP 15 -150 MB, Tracks Lenght x Wide 1500 x 150 mm, Track Max Opening 95 mm ( 2 Pneumatic Cylinders ), Max Speed : 25 m/min, Max Take Off 23 kN, 2 Direct Gear box Motor to everyone carterpillar , 2 x 1.1 kW, Saw type TAV 90, Max Vertical Adjustment 95 mm, Max Cutting Lenght 300 mm, Motor 1.5 kW, Shaves Suction Motor 1.1 kW
CALIBRATING TABLE BATTENFELD K 160 V2, 2 Speck v-pumps 4 kw / 2 sections, 16 x vacuum-connections, 12 x water-connections, Blower for drying, HAUL OFF BATTENFELD P 100 SV, 2-belt haul-off (type caterpillar), Contact 1.200 x 160 mm, Speed approx. 0,5 – 15 m/min., Motor-power approx. 4 kw, Pulling-power approx. -6.000 N maxi., SAW BATTENFELD SPR 32 P, Profile-saw upstroking, Blade Ø 300 mm, Chip/dust-suction, control panles,, Electric manuals available
tank capacity: 200 l engine output: 5,5 5,5 current capacity: 380 V / 50 Hz total power requirement: 6 kW weight of the machine ca.: 800 Kg range L-W-H: 1,3 x 0,7 x 1,0 m Hydraulic center winders for knitted fabrics, adjustable, controllable tension, Menzel connection system. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
2 pcs. Lifting beams Load capacity 57.5 t each. Total length each 6000 mm with 4 shackles each
Manufacturer: Bär Type of Machine : Coolant Cleaning System Year of Manufacture: 2015 Voltage Supply: 3L/ N/ PE 400 VAC / 50 Hz Control Voltage: 24 V DC Connection Rating: 185 kW / 350 A Max. Fuse Protection: 400 A Minimum Cable Cross-Section: 240 mm² Find more here - / Contact us at -
CNC MACHINING CENTER ALZMETALL BAZ 15, Year of manufacture : 1998 Specifications: X : 600mm Y : 400mm Z : 600mm Table : 750 x 450mm Main spindle : 10,000RPM Control : Siemens Sinumerik
Generator – ABB AMK 500L4A BATH Manufacturer: ABB Rated Power: 2,020 kW Voltage: 690 V Current: 1,522 A Frequency: 50 Hz Power Factor: 1.0 Speed: 1,680 rpm (max 2,450 rpm / 2 min) Protection Class: IP54 Insulation Class: F Weight: 5,010 kg Year: 2005
AMUT TWIN SCREW EXTRUDER BA86 (photos before reconditioning), n.2 x 86 mm diam. counter-rotating screws (24 L/D with 4.440 worked hours), Siemens d.c. 31 kw drive, N.1 vacuum degassing pump 1,5 kw, Throughput rate up to 180 kg/h with PVC, N.6 heating areas, N.4 cooling areas, Manuals, CE, drawings available, The machine is offered reconditioned, options available: profiles downstream equipment, capacity: 180 kg/h, conditions: reconditioned, type: for PVC
serial number: 1296 : ja changer: ja fach documentation: ja control: Heidenhain 426 weight of the machine ca.: 6 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
n°1 Balacchi BR4SSB PVC welding machine Year 2004 -n°1 Balacchi BR12PT PVC welding machine year 199
Height=0.9 m, Overall length= 0.85 m, Overall width= 1.68 m, Net weight= 4 kg,
maximum number of results exceeded
please refine your search
