ba 120 used for sale

Center height: 700 mm Center width: 1800 mm Gr. Circulation Ø over bed/in offset: 1300/1740 mm Rotary Ø over support slide: 740 mm 12 spindle speeds: 3 - 135 rpm 12 feeds: 0.15 - 2 mm/rev Upper support adjustment: 350 mm electr. Connection: 380 V, 6.6 kW Weight approx.: 5.5 t Space requirement: 3800 x 1600 x 1700 mm

2 labeling units for applying a lid and a body label,, Dispensing width SES 80: 85 mm, SES 120: 125 mm,, dispensing speed: 0 - 60 m/min,, Unwind: diameter: 300 mm,, spool: diameter: 170 mm,, was used to label plastic cans.

Used machine Rows of holes Dowel drills Manufacturer: Ganner Type: Gannomat 120 Year of manufacture: unknown Power: 1.1 kW Working range: Drilling stroke: 120 mm

hydraulic press with hot platens by with thermal oil model COLOMBO REMO second hand machine for wood, veneer, composite materials, furniture, panels etc platen useful size mm.3000 x 1300 n.06 cylinders diam.mm. 80 max. thrust Ton. 120 intermediate worktop ( 3 worktops , 2 work compartments ) hydraulic pump motor power Hp 3 heating by with thermal oil weight kgs. 5500 volt. 380/50

A Boschert notching machine with an integrated punching station is available. Cutting angle range: 30°-120°, punching capacity: 15t, punching diameter range: 9.19mm-91.87mm, cutting length range: 53.85mm-53.46mm, max. sheet thickness: 10mm, punching force: 15t, stroke rate: 40/min, table dimensions X/Y: 1000mm/650mm, machine dimensions X/Y/Z: approx. 1250mm/1000mm/1200mm, weight: approx. 2000kg. Documentation vorhanden. An on-site inspection is possible.

CONTROLS   CNC controls SIEMENS TECHNICAL SPECIFICATION   Max. diameter of tube: 120 mm   Max. bending radius: 180 mm ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 8000 mm   space requirements -front/back-: 2600 mm   total height: 2300 mm   total weight approx.: 16500 kg machine in a very good condition Machine in very good condition Special features: - Free-form bending option - Laser scanner for securing the bending area - Foot pedal for safe start - Bending simulation Automation: - CNC control BEND MOTION CONTROL - Automatic mandrel lubrication as MMS Retrofit 2018: - Control system retrofit - Cables replaced - Bending head overhauled - Guides replaced - complete equipment (see photos) (Ø22x2, Ø28x2, & ...

COMAFER briquetting machine model DINAMIC 120: – briquette diameter 70mm – hourly production from 50 to 130 kg/h – hydraulic power unit HP 10, volt 380 – hopper diameter D=1000mm – with inspection door – with level probe – overall dimensions 2 x 1.2 x h = 1.5 m – weight 900 kg – year 1998, in accordance with CE standards

Manufacturer: EMCO Model: MC 120-60 Year of Manufacture: 2008 Type of Machine : Machining Center Spindle hours: 10,459 CNC Control: Fanuc 18i-MB Tool holder: SK40 Condition: Used, fully functional Axis Travel - X axis: 1,200 mm - Y axis: 600 mm - Z axis: 500 mm - 4th axis: Yes, installed - 5th axis: No Equipment and Features - Tool magazine: 30 positions - Band filter: Yes - Chip conveyor: Yes - SK40 toolholder package included - Fully operational Lang Eco Compact 10 automation system with 10 vices included - Custom-built slatted loading rack for ergonomic loading and unloading of machine and - automation Find more here - / Contact us at -

Tank car Diosna SP 120 Suitable for spiral mixers: Diosna SP 120 Tank car overhauled drivable

Strasbourg Labeling Service SES-120-II Hotmelt labeler for square and round containers, configured for 0.1 ltr, 0.25 ltr, and 0.5 ltr pocket bottles, etc., for square containers with 2 labels or for round containers with one label., Output up to 4,000 units per hour, worked until the end... ran only 10 times a year

Spiral mixer Diosna SP 120 D compact kneading machine for individual doughs! 2 timers Stainless Steel Boiler and Spiral Robust technology Connection: 400 V Used machine overhauled with warranty

Process Vessels Stainless Steel Mixer/Melting Tank Manufacturer: Dibir Group Srl Capacity approx. 120 litres Electrically heated, thermal oil Frequency-controlled agitator Temperature control

Spiral mixer Diosna SP 120 D 2 timers Spiral mixer with 2 gears Stainless Steel Boiler and Spiral Robust technology Connection: 400 V Used machine with warranty

Spiral mixer Diosna SP 120 D compact kneading machine for individual doughs! 2 timers Spiral mixer with 2 gears Stainless Steel Boiler and Spiral for max. 120 kg dough Connection: 400 V Used machine overhauled

Spiral mixer Diosna SP 120 D compact kneading machine for individual doughs! 2 timers Spiral mixer with 2 gears Stainless Steel Boiler and Spiral Robust technology Connection: 400 V Used machine overhauled with warranty

Spiral mixer Diosna SP 120 D compact kneading machine for individual doughs! 2 timers Spiral mixer with 2 gears Stainless Steel Boiler and Spiral Connection: 400 V Approx. dimensions: 800 x 1270 mm WxD Used machine overhauled with warranty

Spiral mixer Diosna SP 120 D compact kneading machine for individual doughs! 2 timers Spiral mixer with 2 gears Robust technology Connection: 400 V Approx. dimensions: 800 x 1270 mm WxD Used machine

Awaiting refurbishment at our headquarters in Northamptonshire is this Engel VC500/120 injection moulding machine with double pneumatic and single hydraulic core pull. Any machines awaiting refurbishment (or undergoing refurbishment) with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Inc ...

TECHNICAL DATA: Machine for making pallets Usable work surface: 1200 x 1200 mm Motorized loading roller conveyor: 4500 mm Motorized unloading conveyor: 2500 mm + 3000 mm (free-running) Installed power (cutting unit): 9 kW EQUIPPED WITH: Package Holder 01 Lower conveyor belt for wood waste: 8000 x 800 mm + Tiltable end ramp: 2500 mm

used spiral mixer Eberhardt Maximat MAAN 120Manufacturer : EberhardtType: Maximat MAAN 120400 V 50Hz 8,55kW 20,5 ASpiral kneader Eberhardt Maximat MAAN 120 extendable, 120 kg dough, 2 clocks, with 2 stainless steel kettles, stainless steel spiral,This is a high-quality professional device, which is mainly used in bakeries and kitchens for kneading dough in large quantities. Brief overview: Eberhardt Maximat MAAN 120Manufacturer: Eberhardt GmbH (a German manufacturer of baking technology based in Neckarsulm)Type: Stationary kneading machine / spiral mixerKneading capacity: Up to 120 kg wheat dough

Spiral mixer Eberhardt Maximat MAAN 120 extendableManufacturer : EberhardtType: Maximat MAAN 120400 V 50Hz 8,55kW 20,5 AUsed spiral mixer Eberhardt Maximat MAAN 120 extendable, 120 kg dough, 2 clocks, with 1 stainless steel kettle, stainless steel spiral,This is a high-quality professional device, which is mainly used in bakeries and large kitchens for kneading dough in large quantities. Quick overview: Eberhardt Maximat MAAN 120Manufacturer: Eberhardt GmbH (a German manufacturer of baking technology based in Neckarsulm)Type: Stationary kneading machine / spiral kneading machineKneading capacity: Up to 120 kg

Beater Herlitzius (A 120) for bread slicerKnife (A 120) from Herlitzius for bread slicer, is used. Dimensions W.: 45 cm, H.: 28 cm (photo may vary)Herlitzius knives are known for their high quality and are often used in commercial bread slicers. Model A 120 presumably refers to a specific knife size or design that fits different machines. These knives are typically made of high-quality steel and need to be sharpened or replaced regularly to ensure a clean cut.

Spiral mixer DIOSNA SP 120 D Product description Manufacturer: DIOSNA Dierks &, Söhne Type: SP 120 D Condition: used, functional, baker's condition Material: Stainless steel kettle, galvanized kneading spiral For up to 120 kg dough (approx. 75 kg flour) Manual control 2 clocks and 2 speeds Incl. protective cover Motor power: 380 V / 16 A / 50 Hz Dimensions: width 80 cm, depth 125 cm, Height 130 cm See pictures for details.

Lifting kneading machine Diosna S 120 Plus Description A used lifting kneading machine Diosna S 120 Plus Manufacturer: Diosna Dierks &, Söhne GmbH Type: S 120 Plus Condition: Machine is revised and repainted Lifting kneader Diosna S 120For max. 120 kg dough With 1 automatic timer Machine is revised and repainted With 2 gears, slow and fast With stainless steel kettle With flour dust cover Mobile on castors with brake

diameter range 2-7 mm shaft length under head 120 mm cutting length 140 mm output - pieces/min 300

Forklift bucket, hydraulic forklift bucket, light material bucket, tipping bucket, container tipping device, forklift tines, forklift forks, fork tines -Forklift tines: 2 pieces/1 pair -Length: 1000mm -Cross section: 120 x 40 mm -Recording: 500 mm (see sketch in the photos) -Transport dimensions: 1155/700/H120 mm -Weight: 132 kg

Gear motor, electric motor, three-phase motor, door drive, roller door drive, sectional door drive, electric gear motor, electromat -Manufacturer: GfA, Elektromat type SE 3.5.120-25.00 -Speed: 120 rpm -Motor: Siemens, power 0.37 kW -Shaft: Ø 25 mm -Protection class: IP 55 -Dimensions: 375/140/H245 mm -Weight. 12 kg

Round cylinder, pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp -Stroke: 120 mm -Piston: Ø 40 mm -Piston rod: Ø 16 mm -Total length: 345 mm -Total length extended: 465 mm -End position cushioning: adjustable on both sides -Number: 1x available -Price: per piece -Dimensions: 52/H345 mm -Weight: 3 kg

Positioning ring, clamping ring, clamping pallet, short taper, shuttle table -Type: SRB 120 -for: NSA plus static tethering station -both sides: ground -Clamping rings: with ground short cone for positive locking connection of the clamping pallets or devices with the clamping modules. -Form-fit connection: between clamping pallet and NSA plus clamping station. -Quantity: 25x available Price: per piece -Dimensions: Ø 118/H19 mm -Weight: 0.8 kg

Variator pulley, Vario adjusting pulley, Vario pulley, PIV gear, Vario gear, variable speed pulley, variable pulley, expansion pulley, V-belt pulley adjustable -Manufacturer: Lenze, vario pulley with compression spring -Diameter pulley outside: 120 mm -Diameter mounting inside: 12 mm -Quantity: 3x pulley available -Price per piece -Dimensions: Ø120 x 80 mm -Weight: 1.1 kg/pc.

Variator pulley, Vario adjusting pulley, Vario pulley, PIV gear, Vario gear, variable speed pulley, variable pulley, expansion pulley, V-belt pulley adjustable -Manufacturer: Lenze, vario pulley with compression spring -Diameter pulley outside: 120 mm -Diameter mounting inside: 12 mm -Quantity: 3x pulley available -Price per piece -Dimensions: Ø120 x 80 mm -Weight: 1.1 kg/pc.

Hand lever shears, long-blade sheet metal and round steel shears, lever shears -Hand lever shears: Sheet metal shears with stop and stable base -Cutting insert length: approx. 160 mm -Lever arm: with rack and pinion transmission -Lift-down device: infinitely adjustable -Overall dimensions: 1000/780/H1870 mm -Transport dimensions: 1000/780/H1300 mm -Weight: 100 kg

Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller track, carrier rollers -Conveyor rollers: transport rollers diameter 120 mm -Transport width: 390 mm -Shaft: recording see photo -Number: 3x transport roller available -Total dimensions: Ø 120 x 595 mm -Weight: 2,3 kg/pcs

Variator pulley, vario timing pulley, vario pulley, PIV gearbox, vario gearbox, variable speed pulley, variable pulley, expansion pulley, adjustable V-pulley -Variator pulley: Vario pulley -Outer pulley diameter: 120 mm -Diameter inside: 12 mm -Number: 4x pulley available -Price per piece -Total dimensions: 200/160/H120 mm -Weight: 2.8 kg/pc.

Disc valve, butterfly valve, ball valve, butterfly valve, shut-off valve, gate valve, pneumatic energy-saving gate valve -Manufacturer: Schuko, Pneumatic gate valve type 120 -Diameter: 120 mm -Valve actuator: 220 V, convertible to 24 V -Nominal pressure: max. 6 bar -Quantity: 1x shut-off valve available -Dimensions: 450/230/H155 mm -Weight: 3.7 kg

Folding machine, folding machine, form folding machine, profiling machine, profiling system, slat production, blind production, roller feeder, reel, unwind reel, motorized reel for sheet metal processing, motor reel, unwind reel, sheet metal unwinder, strip feeder, strip feeder for eccentric press, hydraulic press -Profiling system: Roller insertion with cooling water/hot water device, from slat/blind manufacturing -Sealing heads: maier type DX 215 L / DX 215 R -Rollers: Ø 120 x 220 mm -Drive: 1.1 kW -Individual components: see photos -Drive shaft: Ø 35mm -Dimensions: 1120/405/1310 mm -Weight: 312 kg

Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder, clamping cylinder, pneumo-hydraulic cylinder, hydro-pneumatic press cylinder -Manufacturer: TOX PRESSOTECHNIK, pneumohydraulic cylinder type S 04.113.040.120 -Lifting distance: 300 mm -Piston: Ø mm -Piston rod: Ø 30 mm -Quantity: 2x cylinders available -Price per piece -Dimensions: 645/85/H130 mm -Weight: 16 kg/pc.

Incremental rotary encoder with solid shaft, absolute rotary encoder, encoder, rotary encoder, encoder, absolute rotary encoder, absolute encoder, function encoder, resolver, resolver, rotary pulse encoder, tacho generator, incremental encoder -Encoder: Type IRC 120/500 -Shaft: Ø 5 x 14 mm -Quantity: 1x encoder available -Dimensions: Ø 57 x 134 mm -Weight: 0.5 kg

live center, live center point, live Morse taper, live center point, live lathe center, center point, centering taper -Manufacturer: Bruckner, live centering tip, centering cone Type: unfortunately without a type designation -Recording: MK5 -Centering tip: Ø 60 mm -Dimensions: Ø 120 x 315 mm -Weight: 9.6 kg

C-shaped screw clamp, screw clamps, steel construction clamps, clamps, clamping tools -Manufacturer: Holex, malleable cast iron screw clamp 600 x 120 mm -Article No.: Hoffmann 860100 600 -Wingspan: approx. 600 mm -Clamping depth: approx. 120 mm -Number: 3x screw clamp available -Price per piece -Dimensions: 700/190/H40 mm -Weight: 3.1 kg/piece

C-shaped screw clamp, screw clamps, steel construction clamps, clamps, clamping tools, malleable cast iron screw clamp -Manufacturer: Holex, malleable cast iron screw clamp 250 x 120 mm -Wingspan: approx. 250 mm -Clamping depth: approx. 120 mm -Quantity: 1x screw clamp available -Dimensions: 340/180/H30 mm -Weight: 1.5 kg.

Dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, pressure blower, vacuum blower, radial fan, ventilation blower, radial blower, blower, fan -Manufacturer: MA-VIB, fan blower radial fan type OS.120.201.4 -Engine power: kW -Speed: 2950 rpm -Volume output: /min -Fan wheel: Ø 120 x 30 mm -Connection input: Ø 135 mm -Connection output: 80 x 55 mm -Dimensions: 210/190/H200 mm -Weight: 3.1 kg

Dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, pressure blower, vacuum blower, radial fan, ventilation blower, radial blower, blower, fan -Fan: Radial fan -Type: unfortunately no type designation -Motor: 220/380 V -Fan wheel: Ø 120 x 50 mm -Connection input: Ø 130 mm -Connection output: 65 x 80 mm -Dimensions: 220/200/H210 mm -Weight: 3.5 kg

scoring circular saw blade, scoring circular saw blades, HW scoring saw -Manufacturer: Schäffer, Vorritz circular saw blades HW-Vorritzer 2-part, adjustable -Type: 120 x 2.8-3.6 x22Z=2x12 -Number: 9x scoring saws available -Price: per piece -Dimensions box: 225/220/H10 mm -Weight: 0.3 kg/piece

Machine vice, clamping claws, clamping jaws, stable clamping jaw, stable clamping jaw, clamping claws, pull-down clamp, pull-down jaw, side clamp -Stable clamping jaw: Stable clamping jaw height adjustable -Clamping jaw: 120 x 30 mm -Clamping height: max. 225 mm -Groove width: 25 mm -Number: 4x clamping jaws available -Price: per piece -Dimensions: 240/120/H130 mm -Weight: 15.1 kg/piece

Frequency converter, frequency converter, drive converter, controller, variable speed drive, single motor module, double motor module, active line module, voltage limiting module, voltage protection module -Manufacturer: Siemens, Simodrive Active Line Module VPM 120 from vertical lathe Scherer VDZ 80 DS -Type: 6SN1113-1AA00-1JA1 -Input: 3AC 430-480V -Dimensions: 600/300/H170 mm -Weight: 10.7 kg

Grinding drum, deflection drum, belt sander, belt sander, drum sander, drum grinding machine, conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, carrying rollers -Manufacturer: KED Kurt Ehemann, grinding drum, drum width 150 mm -Drum: Ø 120 mm -Hole: Ø 25 x 150 mm -Quantity: 1 drum available -Dimensions: Ø 120 x 150 mm -Weight: 4.1 kg

Coupling, power coupling, gear coupling, transmission coupling, flange hub for crane undercarriage, running wheel, bridge crane, hall crane, assembly crane, flange hub, coupling star, claw coupling, shaft coupling, clamping set -Manufacturer: Bikon, clamping set type Dobikon 1012-120-165 -Art.No.: 1031 4151 MKrane -Number: 3x clamping set available -Dimensions: Ø 165 x 112 mm -Weight: 6.3 kg/piece

Rolling bearings, ball bearings, SKF bearings, SKF, self-aligning bearings, roller bearings, needle bearings, axial cylindrical roller bearings, shaft washer, axial needle roller and cage assembly, cylindrical roller and cage assembly, cylindrical roller bearings -Manufacturer: INA, needle bearing with inner ring unused OVP -Type: RNA/NA 4824 -Outer diameter: 150 mm -Inner diameter: 120 mm -Number: 6 needle bearings available -Price: per piece -Bearing dimensions: Ø 150 x 30 mm -Weight: 1.2 kg/piece

Heavy-duty transport rollers, machine rollers, transport trolleys, heavy-duty trolleys, tank rollers, machine transport rollers steering gear, tank roller plates, machine transport chassis -Support plate: Turntable for machine transport chassis -Load capacity: t -Plate: Ø 120 mm -Quantity: 1 pc. available -Dimensions: 210/120/H70 mm -Weight: 4.5 kg