130,758 used machines on RESALE, but how to find them? Machine Search
In 2007 Floor press from BÃ?TFERING, type 4 H 100,. Lower piston design Pressing area of 1250 x 2200 mm Aluminium plates electrically heated Total pressure of 100 to Operating pressure 320 bar spec. Pressure 3.5 kg/cm2 with full interpretation spec. Pressure at 80% design 4.5 kg / cm2 Hydraulic power 380 volts, 50 Hz, 1.5 kW Press plates: 2 piece ELKOM electric heating Panel solid hard aluminum in the thermally stable sandwich construction for temperature applications up to 200 ° C 2200 x 1250 x 18 mm + 19 mm Mono Lux + 19 mm V 100 insulation plate 17,500 Watts, 400 volts, 3 Ph. Surface smooth, flat, screw-free, gold anodized Plate construction hides more-row from the bottom screwed maximum continuous temperature 200 ° C incl. 2 piece cooling plate in Sandwitchbauweise. This is mounted below the insulation. The heatsink must be with a cold ...
BECO KD 10 - depth layers Manufacturer: E. BEGEROW GmbH & co. Type: KD 10 Item No.: 22100160 Dimensions: 600 x 615 mm Pack size: 50 pieces Depth layers are still in their original packaging and therefore unused! Therefore new and in very good condition! Price refers to 1 piece.
Control SIEMENS 805 TECHNICAL DATA: WORK AREA / DIMENSIONS Swing over bed [mm] 820 Swing over facing slide [mm] 515 Displacement of the plan slide [mm] 520 Displacement of the upper support [mm] 250 Turning length [mm] 2000 Tip height on flat railway [mm] 400 Bed width [mm] 560 Bed sleigh length [mm] 800 Facing slide width [mm] 320 Plan valve length [mm] 1005 Upper support width [mm] 200 Turning tool cross section according to DIN 770 hxb [mm] 40 x 25 MAIN SPINDLE Spindle nose according to DIN 55 027 [Gr.] 11 Spindle diameter in front bearing [mm] 170 Spindle bore [mm] 128 Inner taper of main spindle [metr.] 136 MAIN drive infinitely adjustable three-phase motor (AC motor) Power 60% / 100% ED [kW] 46/37 Torque max 60% / 100% ED [NM] 5,300/4.260 Torque max 60% / 100% ED [NM] 5,300/4.260 Total speed range [min-1] 6.3 1,600 Transmission levels 2 Speed rang ...
Eurolux Beer Tank/ Storage Tank/ Pressure Tank 400 litres with cooling jacket in AISI 304, working pressure: +2,0 bar NEW Eurolux Beer Tank/ Storage Tank/ Pressure Tank 400 litres with cooling jacket in AISI 304, working pressure: +2,0 bar NEW
Eurolux Beer Tank/ Storage Tank/ Pressure Tank 1000 Litres with cooling jacket in AISI 304, working pressure: +2,0 bar NEW Pillow Plate Inside Operating pressure:: +3,0 bar +2,0 bar Test pressure: +5,2 bar + 3,4 bar Operation vacuum: -0,15 bar - 0,15 bar Operation temperature: -10/+80°C -10/+130°C Material: V2A - AISI 304, 1.4301 Surface: pickled, passivated and neutralized Upper Bottom: - strong stackable crown - manhole lid round Ø 400 mm with 2 x handle - 1 x thread connection DN 50 with blind cap - 1 x overpressure valve - 1 x CO² venting valve - 6 x cap screws Cylindrical Body: - with cooling jacket 843 mm - connections for cooling jacket on the back inlet 1/2, outlet 1/2 ...
Eccentric C stand press, little used C frame - eccentric press, used Type: PED 63.3 S4 manufacturer: WMW Year of construction: 1994 Pressing power / rated pressure: 63 t Sheet thickness / material thickn. 3.2 mm Table size / surface of bed: 800 x 580 mm Hole in the table / hole in table: 300 mm diameter. Stroke / stroke of slide: 8... 120 mm Number / number of strokes: 56 / 90 / min Tappet adjustment / adjustment of slide: 70 mm The maximum distance between Table and plunger / max distance between table and slide: 560 m Projection / Cap: mm Power of main motor / power of main motor: 6 kW Weight / weight: 5.5 t
TO WHOM IT MAY CONCERN WE VE 3 PCS BERGEN KRG-9 COMPLETE ENGINES AT OUR STOCK. ENGINES HAS BEEN REBUILT ON 2006. ENGINES PRESENT CRANK SHAFTS HAS STANDARTS SIZE CLASS HARD STAMP ON IT. ENGINES MAINTENED WELL. ENGINES ARE TURNING W?TH GOOD SUCT?ON ALL ENGINES READY TO TRANSPORT TYPE KRG-9 ENGINE NO 3186-3187-3188 BUILT YEAR 1986/REBUILT 2006 KW 1825 SPEED 750 MADE IN NORWAY ENGINES TURBO CHARGERS ARE ABB VTR 254-P11 IF YOU VE ANY FURTHER QUEST?ONS PLS DO NOT HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurluba BEST Regards; Aliaga Marine Services E mail: info/aliagamarine.com Phn/Fax:+90 232 618 03 90 Mobile: + 905556084850 aliagamarine.com TURKEY
Swing mill for iron-free grinding or micronizing of chisels (solid sum content 70 - 78%), grinding chamber lined rubber, drive 22 kW. Task size: Up to 5 mm; final fineness: 4 microns. Last used grinding body: 7.5 to. Cylpebs, 20 mm x 20 mm (not included).
used
Diesel engine industry interest as a complete gene set very good condition over BRA on rapeseed oil 6900 with Leroy Somer generator for sale. If intrested the genset as a complete CHP incl. heat exchangers can be ordered all components year 2009 CHP manufacturer was the company Würz energy GmbH
Sparkling Pressure Tank / Steel Pressure Tank Storage Tank / Pressure Tank with red food safe munkadur coating, HORIZONTAL with new KIESELMANN Sparkling pressure fitting Operating pressure 8 bar Volume: 5.000 Litres Measurement and Weight: Total Length: 2800 mm Cyl. Length: 2045 mm Diameter: 1600 mm Weight: approx. 1220 kg Operating pressure: 8 bar, Test pressure: 10,4 bar Operating temperature: -10+50°C Tank lining: EMS 277 Inspection book, Documentation available Tank-Description Container with torispherical bottoms. Bottoms 8 mm wall thickness, jacket wall thickness 8 mm. Top of the tank: • with 1 flange DN 25 Tank body: • with forward drawn manhole oval front 440 x 350 mm swiveling with holder • with new KIESELMANN Sparkling pressure fitting with manome ...
Force of pressure: 30 to piston stroke: 150 mm table width: 185 mm passage (S): 530 mm bore (F): distance of 140 mm cylinders - table (F1): distance 150 mm cylinder - table (F2): 1030 mm cylinder movable (M): 200 mm width (A): (B depth of 800 mm): 700 mm height 1 (C): 1775 mm height 2 (D): 1805 mm weight: 162 kg
Sparkling Pressure Tank / Sparkling Cooling Tank / Steel Pressure Tank Agitator Tank with red food safe munkadur coating with cooling jacket and with isolation With new KIESELMANN sparkling pressure fitting Operating Pressure: 8 bar Volume: 8.000 Litre Measurement and Weight: Total Height: 4900 mm Tank Body Height: 3625 mm Diameter: 1900 mm Weight: 2100 kg Uni 4850 Operating-overpressure: 8 bar, Test pressure: 10,4 bar Operating temperature: -10 +40 °C Year of construction: 2000 Lining: Akorrosit EL 15 p” On cylindrical part two cooling jacket, test pressure 2 bar, depressurizes, 5,8 m2 cooling surface Inspection book, Dokumentation available Tank-Description Container with torispherical bottoms. Bottoms and jacket 8 mm wall thickness. Container outside completely isolated with ...
Force of pressure: 50T piston stroke: 200 mm table width: 260 mm passage (S): 730 mm bore (F): distance 205 mm cylinder - table (F1): distance 75 mm cylinder - table (F2): 1050 mm cylinder movable (M): 240 mm width (A): 1040 mm depth (B): 800 mm height 1 (C): 1835 mm height 2 (D): 1880 mm weight approx.: 287 kg
Sparkling Pressure Tank / Champagne cooling tank / Storage Tank/ Pressure Tank Overpressure 8 bar, STANDING With new KIESELMANN sparkling pressure fitting Volume: 10.000 Litres Measurement and Weight: Total Height: 3220 mm Cyl.Height. 2050 mm Diameter: 2200 mm Weight: approx. 2250 kg Uni 3950 Operating-overpressure: 8 bar, Test pressure: 10,4 bar Operating temperature : 20°C Inspection book, Dokumentation available Tank-Description Container with torispherical bottoms. Bottoms 12 mm wall thickness and jacket 10 mm wall thickness. Tank upper body: · filling connection DN 50 central in the top · 2 crane eyelets · Flange connection NW 40 · 1 Block flange NW 20 Tank front: · with manhole oval 450 x 350 mm swivelling with holder · with new KIESELMANN sparkling pressure fitting up to 10 bar with manometer, with overpressure s ...
1 x Buss PR200? Ko-Kneader, supplied fully refurbished by Buss in 1995, G130 gearbox, 11 L/D ratio, with 340kW dc motor and controls. Including oil heater and TCU 2t/hr output. Spare screw and barrel segments.
Sparkling Pressure Tank / Sparkling Cooling Tank / Steel Pressure Tank Agitator Tank / Storage Tank / Pressure Tank with red food safe munkadur coating with cooling jacket and with isolation STANDING with new KIESELMANN sparkling pressure fitting Operating Pressure: 8 bar Volume: 11.500 Litre Measurement and Weight: Total Height: 4450 mm Tank Body Height: 4000 mm Diameter: 2250 mm Weight: 3400 kg Uni 4950 Operating-overpressure: 8 bar, Test pressure: 10,5 bar Operating pressure double jacket: 2 bar, Test pressure: 2,6 bar Inspection book, Dokumentation available Tank-Description Container with torispherical bottoms. Bottoms wall thickness and jacket wall thickness inside container 11 mm. On cylindrical part of a cooling jacket about 2,30 m high as double jacket. Container outside approx. 100 mm isolated, with scre ...
used
1 x Buzuluk 240 litre Internal mixer Model: 14630, year: Dec 2008 (body and hopper), Batch size: 200 kgs, Drilled sides, Self sealing type dust seals, Oil injection, Hydraulic drop door with linear actuator and toggle latch, Stellite faced drop door, Two wing tangential rotors. 20in pneumatic hopper. 3 zone TCU Full unidrive gearbox (Make Skoda), with 630kW, 6000V, 739rpm, 73.5A slip ring motor and Oil filled starter. In very good condition.
used
1 x Berstorff GmbH 250mm strainer extruder, Year of manufacture: 1988, L/D ratio 7:1, power roller feed (300mm wide), with 120kW, 1800rpm DC variable speed motor mounted on top of gearbox (belt drive), with tube head and knife at top for sheet extrusion. Complete with control panel etc and in very good condition.
Beer tanks / fermentation tanks and storage tanks 118.700 Liter Brand new cylindroconical Beer tanks / fermentation tanks and storage tanks designed for installation in stainless steel V2A room, WSt 1.4301 IIIc Capacity: 118.700 Liter Total content approx. 118.700 ltr. Net content of fermented about 87,700 liters. Inner diameter about 3,900 mm Outer diameter approx. 4,100 mm Cyl. Height about 8,500 mm Eaves height approx. 13,500 mm Total height approx. 14,100 mm Ground clearance: 1,280 mm Perm. Operating pressure: 1 bar Perm. Operating temperature: 40 ° C Perm. spec. Weight: 1.05 kg / dm³ Cooling jacket: Cooling zones on the cylinder approx. 4 x 16.5 m² (total approx. 66 m²) Cooling zone cone approx. 10.5 m² Perm. Operating pressure: 4 bar Perm. Operating temperature: -10/40 ° C Insulation thickness: 100 mm Material: Cr-Ni steel, WSt. ...
Freestanding distillery – 350 liter capacity Equipment: - Heating: by steam (against extra charge combustion chamber with water bath) - Steam jacket / water bath 4 mm stainless steel - Copper bubble Ø 900 mm, semi-conical - Filling DN 350 cast brass - Medium column / special fine burner with 3 trays - And attached tube end phlegmator and Kotzbecken - Incl. 4 sight glasses - Outlet ball valve DN 100 - Connecting piece agitator - Special tube cooler made of stainless steel including brandy - Spirit tubes stainless steel Basic price distillery, filling volume 350 liter: 32.620,00 € Additional equipment: Combustion chamber for solid fuels 48 kW made of 8 mm steel, incl. Smoke gas heat exchanger 8-pipe system 2.750,00 € Insulation water bath / steam bath made of stainless steel with 30 mm rockwool 1.760,00 € 4 connectio ...
Lefort BR1260 Shredder for sale. The machine has 10 hammers, 500 Hp electric engine. The machine has a low hours (less than 2.500). THe machine's capacity is around 20-25 tons/hours which means this is an exelent machine. Price is including the separation and conveyor system to, which is including the followings. -Feeding conveyor (1260 mm wide) -Vibrating table -magnet drum (type:BMK 100-180TML ) -1 conveyor for metal scrap with cabin for separation -1 big conveyor for nonferrous and other materials Bbmc3fzwrj -1 magnet belt -1 magnet separation system ( separating the non-ferrous metals from the dust) that system is including a vibrating table, and electric box (type:EC-X650 ) -2 conveyors from non-ferrous metal and for dust. VERY IMPORTANT: Every part of the system and every function works. +Option: We can help you in the diassembling, assembling and in the transport ...
Bevel scale Manufacturers: Bizerba Minimum load: 10 kg Maximum load: 500 kg 1 tick: 200 gr Scale is in working and in good condition!
dosing pump BRAN LUEBBE for premix performance 40,000 lt/h
The BTS-MF500LH is the ideal waste baler for compacting your loose cardboard and plastic film waste into a bale of up to 500 kg. Due to the compact design and low height this baler is perfect for rooms with limited ceiling heights. The waste baler impresses with its ease of use, safe operation and its large filling volume. By baling these valuable and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Pressing force: 50 Ton Bale weight: up to 500 kg (material depending) Bale size: 1100 H (var.) x 1400 W x 800 D mm Machine size: 2249 H x 2041 W x 1350 D mm Machine weight: 2100 kg Transport height: 2249 mm Loading aperture: 1400 W x 680 H mm Cycle times: 35 seconds Motor: 11 kW 32 Amp Power supply: 380 - 400 V (3 phase) Noise level: 68 dB ...
BTS-MF40 Cans_PET Special Waste Baler The BTS-MF40 Cans_PET Special Waste Baler with perforator is ideal for compacting difficult and hard materials such as beverage cans and PET bottles. The perforator compaction head pierces empty but also full bottles and cans so air and liquid can escape and in the same process material will be compacted. The Special Waste Baler impresses with its easy operation throughput and large filling volume. - Solid bales with bale weight up to 40 kg - Suitable for empty and full cans and PET bottles - Shorter handling time cause one chamber is always free for loading while the other chamber is compacted - Perforator compaction head for piercing closed cans or PET bottles so air and liquids can escape - Roller guided head for ease of movement - CE-certified - Quality product Made in Europe Pressing force: 8 Ton Motor: 2.2 kW 16 Amp Power suppl ...
Make: BITZER Type: S6G-25.2Y Funding volume: 101.1 m3/h year built: BITZER two-stage, 25 KW at minus 35C for freezing, shock freezer Price 3,300,- Info: 0043-6641838175 or info@frigocom.at
Balpe SAS model: 9PL/20 serial: 88 Stainless, 9 electrically heated angled plate with, 200mm diameter, adjustable temperature.
1 x Farrel Bridge Model BR lab banbury mixer, Serial no. 91M7000, year: April 1991, Chamber volume 1.5litre pneumatic hopper and swing side discharge door, David Brown gearbox, 30kW DC variable speed motor and controls. Fully guarded with Key interlock system. Complete and in excellent condition.
Tangential nett volume 70 l drop door AC motor 320 kW / 380 V / 50 Hz, 1483 RPM Year 1987
Material: mild steel Reel in stainless steel;
used
NIP adjustment screw with more grooves
used
used
used
used
used
used
used
used
maximum number of results exceeded
please refine your search
.JPG)
.JPG)
.JPG)
