b und c used for sale

General SKU397X1154 MakeNiro-Aeromatic TypeT3 No.919054 Year of construction1990 LocationBarneveld Main Features MaterialStainless steel Volume123 Ltr. Motor7.5 KW Specified Features - Fluid bed dryer batch Fluidbeddryercheck Granulatorcheck With pancheck With pan mounted on wheelscheck Capacity0,123 m³ Capacity0,186 m² With sprayercheck (CIP) Can be heated by steamcheck With fancheck Capacity0.5 m³/s Motor7,5 kW 380/660 V (EEx E II T3) With dust filtercheck Filter surfaceExhaust filter 3.5 m²: HEPA supply air filter 36 m² MaterialStainless steel 1.4305 (303), Stainless steel 1.4552, Stainless steel 1.4301 (304), Stainless steel 1.4306 (304L) Information With switchgearcheck (as is) Floorspace7,6 x 0,78 m Total height3,5 m Extra Specifications Filter housing – explosion pressure resistance (pressure shock resistance): 10 bar(g) Exhaust air filter  ...

General SKU397X1157 MakeNiro-Aeromatic TypeT6 No.879012.1 Year of construction1986 LocationBarneveld Main Features MaterialStainless steel Volume540 Ltr. Motor20 KW Specified Features - Fluid bed dryer batch Fluidbeddryercheck With pancheck 2x With pan mounted on wheelscheck Capacity540 l. Pan sizesø 1280 x 550 mm Can be heated by steamcheck With fancheck Capacity2 m³/s Motor2,0 kW, 380 V With dust filtercheck Filter surface21 m²: Fine dust filter: 38,6 m² MaterialStainless steel 1.4301 (304), Stainless steel 1.4435 (316L) Information Extra Specifications Heating capacity: 208.3 kW Steam overpressure: 4 bar Max. allowable operating overpressure: 6 bar Test overpressure: 7.8 bar Max. steam consumption: 356 kg/h Average steam consumption: 190 kg/h Fluid bed dryers batchAeromaticDryers > Fluid bed dryers batchBrand > Aeromatic What you can expect from Foe ...

Manufacturer: Brandt KDF mit Fügefräsen, Type: Profiline KDF 670, Year: 2005, Barcode: 0,5-3, Min-max edge material mm: 120-3500, Work piece width min-max mm: 10-55, Min.-max. workpiece length in mm: 10-60, Edgeband height max mm: 20, Luftkissentische Einlauf: Umstellung von 2mm auf Fase automatisch, mit Vakuum: yes, mit Klemmung: yes, Machining cracks: yes, Fine milling: yes, Application of separation agent: yes, PU-EVA: yes, Laser technology: yes, kW Leistung Laser: yes, Min.-max. batten magazine mm: yes, Mitre stations: yes, Bevel milling: yes, with tool holders: yes, Nut Motore: yes, Type of scraper: yes, Number of tools per tool-magazine: yes, Number of sanding units: yes, Buffing unit: yes, Top pressure belt/roller: yes, Workpiece support: yes, Workpiece return: Rolle, Return type: yes, System dismantled: ca. 6700, FREE TEXT: ZHR 01, : ink Rückführung/ Verfügbarkeit ca. ab Jul ...

Manufacturer: Bütfering, Type: SCO 413/TQEQ, Year: 2007, Control: Programmspeicher 600, Barcode: möglich, Monting of the machine: Querschleifen/Längschleifen/Querschleifen/Enststaubung, Sanding width mm: 1350, Sanding hight mm: 160, Number of sanding belts: 3, Sanding belt dimensions: 2620 X 1350, Rollers: keine, Transverse sanding units: 2, Längsschleifaggregate: 1, Bürstenaggregate: 1, Belt 2 shoe unit: Querschleifen, Band 2 Leistung kW : 13,5, Band 2 Schleifbandgeschwindigkeit m/s : 2-16, Belt 2 synchronous and reverse run: Längsschleifen, Band 3 Kombiaggregat Walze/Schuh: Schuh, Band 3 Leistung kW : 15, Band 3 Schleifbandgeschwindigkeit m/s : 2-18, Band 4 Kombiaggregat Walze/Schuh: Querschleifen, Band 4 Leistung kW : 13,5, Band 4 Schleifbandgeschwindigkeit m/s : 2-16, Separation of sampling in mm: 25, Frequency control of belts: 3, Continous adjustable feeding speed m/min: 4- ...

Manufacturer: Brandt, Type: KD 85, Year: 1998, Control: Homatic NC 21, Min-max edge material mm: 0,4-20, Work piece width min-max mm: 70, Min.-max. workpiece height in mm: 8-55, Min-max feed m/min: 7+25, Einlauflineal gesteuert: yes programm, Premilling: yes, Application of separation agent: yes, IR zone: yes, Power per lamp: 400 Watt, Coil magazine: yes, Strip magazin: yes, Mitre stations: yes, Pre-milling: yes, Bevel milling: yes, Radius milling axis adjustment: yes, 4 motors: yes, Grooves, slewable-controlled: yes, Radius scraper: yes, 4 motors: yes, Bonding part EVA: yes, Pre-smelting Kg/Hr: 8 Kilo, Number of sanding units: 3, Edge sanding: 1, Profile sanding top bottom: 2, Buffing unit: yes, Top pressure belt/roller: Band, Separation agent setup: yes, Compressed air bar: 6, Machine lenght mm: 10900, Noise enclosure: yes, FREE TEXT: Schiebeanschlag Einführung Rechtwinkliger Teile/Dr ...

Manufacturer: Bütfering, Type: AWS 2CE 1100, Year: 1992, Monting of the machine: Walze / Schuh, Sanding width mm: 1100, Sanding hight mm: 150, Number of sanding belts: 2, Sanding belt dimensions: 1110 x 1900, Steel roller: yes, Band 1 Leistung kW : 15, Band 1 Schleifbandgeschwindigkeit m/s : 5 / 10, Band 2 Schuhaggregat: 11, Band 2 Schleifbandgeschwindigkeit m/s : 5 / 10, Band 2 Gleich und Gegenlauf: yes, Frequency control of belts: no, Transportbandantrieb kW: 1,5, Intermediate sanding of lacquer: no, Constant table hight: yes, Vacuum table: no, Noise enclosure: yes, Brushing unit: 0,55 kW, Weight in kg: 3300, Year :1992

Manufacturer: Brandt, Type: KE 22 F, Year: 1991, Edgeband thickness max mm: 20, Edgeband height max mm: 55, Thickness of coiled edgeband max mm: 3, Panel length min mm: 250, Work piece thickness min mm: 150, Coil magazine: yes, Feeding speed max m/min: 7-25, Machine lenght mm: 10000, Compressed air bar: 6, Premilling: yes, Strip magazin: yes, Trimming saw: yes, Flush/radius/chamfer milling: yes, Contour milling: no, Ziehklinge Radius: yes, Flat scraper: yes, Buffing unit: yes, Glue system granulate/cartridge: Granulat, Top pressure belt/roller: Rolle, KS 10 Bandschleifaggregat für Funier oder Massiv, Year :1991

Overview This complete filling line for non-returnable PET bottles was manufactured 2004 by the german manufacturer KRONES. The line was running as a non returnable bottle filling line. The line is designed for high-capacity beverage production, handling up to 12,000 b/h and is in a good condition.    Technical Data Capacity: 12,000 bph (at 1,5L); 14,000 bph (at 0,5L)  Filling product: carbonated water and soft drinks with 15°C and 8,0 g/l CO2 Bottle Formats: 0,5L and 1,5L PET CSD Cap Formats: PCO 1810 Contiroll labelling station 2-3-340 for wrap-around label from a reel with hotmelt and 2 x cold glue labelling station 8-8-130 for paper label Packaging formats: shrink wrapping with/without carry handle (3x2) Pallet: 4 x ¼ Plastic pallet (600 x 400 mm); 2 x Half-size pallet (800 x 600 mm) on Euro pallet (1.200 x 800 mm)  Application: CSD Hygienic design condition: good technical con ...

In-store baking oven Unox Bakertop 6 Convection oven for 6 trays 60x40 Upper hood with steam codensator Proofer bottom for 6 trays 60x80 Connection 400V, 32A-CEE plug Used oven & SAB tested with warranty

Residual bread chopper Bio 2 for all light/dark leftover breads etc. "the organic universal shredder" Robust technology Connection 400V, 16A-CEE plug Used machine

Key data: 1100 mm, 3 , 150 mm

Wide belt sander BÜTFERING, AWS-3E-1100, # 0-001-747-312, year 1991 TECHNICAL DATA: Working width max. 1,100 mm Working height max. 150 mm Abrasive belt width 1,110 mm Sanding belt length 1,900 mm 1. Grinding unit Profiled steel contact roller D=200 mm Motor power 15 KW 2. Grinding unit Combined contact rolling - grinding shoe unit Profiled rubberized contact roller, D=150 mm Air cushion sanding shoe Motor power 11 kW 3. Grinding unit Grinding shoe unit, electronically controlled link pressure beam Element width 30 mm Synchronization / counter-rotation Infinitely variable sanding belt speed (frequency converter) Digital display of the sanding belt speed Motor power 11 kW - Transport carpet with stepless belt feed 3 - 15 m/min. - Vacuum table / vacuum clamping device 11 kW - Rotating cleaning brush 0.75 kW - Digital display of the grinding height - ...

Key data: 530 mm

Automatic machine with mitre Cutting Area 90° round 530 mm 90° flat 530 x 800 mm 45° flat 530 x520 mm 30° flat 530 x 320 mm Cutting angle 45°-0°-60° Saw motor 3.0 kW Belt speed 20 - 120 m/min, infinitely variable Equipment: - 99 Programs - Machine stand with chip loading tray - Hydraulic cutting pressure regulation - Stepless speed adjustment - Hydraulic guide arm adjustment - Minimum quantity lubrication - Shutdown at the end of the cut and retraction behind Movable jaw - Chip brush running along - Hydraulic mitre adjustment - Hydraulic vise clamping - Hydraulic saw blade clamping - Instruction manual

Key data: 300 mm, 3920 mm, 34 mm

Extensive standard equipment: Double Column Structure Double Vice with Full Stroke Tension (Hydraulic) Floating Pendulum Vise Hydraulic Saw Band Tension Automatic feed in pendulum mode (500mm) Carbide saw blade guide system Stepless speed control by inverter Driven wire brush Work Light Automatic Chip Conveyor User-friendly NC control with touchscreen Display of belt speed on the touchscreen Flushing hose for machine cleaning

Horizontal Baller for SALE/RENT BAUER 300 Baller is in good working condition (was used in printing house)! Technical specifications: Installation of the secondary raw material baler Manufacturer: BAUER Model: 300 Year of production: 1994 Power: 22 kW Kledex Dk S Asm Aty Atjl Pressing force: 40-50 t The dimensions of the baler are 10,300 x 2,000 x 3,000 mm Tipping weight: ~ 400 kg PRICE AVAILABLE UPON REQUEST! ----- Verkaufen/Mieten Ballenpress BAUER 300 Technische Daten: Bsbmeycfv Iecbw Nvswh Installation der Sekundärrohstoffpresse Hersteller BAUER Modell 300 Produktionsjahr 1994 Leistung 22kW Druckkraft 40-50 t Die Abmessungen der Presse betragen 10300 x 2000 x 3000 mm Kippen Gewicht ~ 400 kg PREIS BEI ANFRAGE!

Crate washer with incline conveyor We will be happy to plan your machine, and change, supplemented conveyor technology

Balers, Bramidan, 4-x 30 SLD, 30 to. Pressing force – used - : Price from location: only 3.950.-€ (net) Manufacturer: Bramidan Type: 4-x 30 SLD Number: PEY297206-3 Year of Make: 2008 H: 2300mm / W: 1800mm / D: 1500mm Weight: 1.850kg 3x230/400V, 25/16 Amp, 4kW Condition: good (the photo with the flutter tape is only so that the press is no longer used because a new, larger one was purchased) Available: immediately Location: Husum Instruction manual is available

Manufacturer: Brandt Type of Machine : Edge Banding Machine Model: KDF 220 Year of Manufacture: 2012 Technical Specifications - Supply Voltage: 400Y/230V - Phases: 3-Phase - Frequency: 50 Hz - Fuse: 16 A - Maximum Operating Full Load Current: 14 A - Short Circuit Current Rating: 5 kA rms symmetrical - Control Voltage: 24 V - Largest Motor: 4.5 A - Largest Heater: 2.4 A - Enclosure Type: 1 Find more here - / Contact us at -

The Brewiks 500 is a two-vessel microbrewery system operating on a plug-and-brew principle. It consists of a mash tun and a lauter tun, both on wheels, which together function as mash tun, filter tun, boiler, and whirlpool. Average output is up to 580 litres of high gravity wort per 6-hour brew cycle. Construction and Certification - The system is manufactured from quality stainless steel AISI 304/316 and carries a CE certificate. - Both vessels are stone wool insulated and mounted on stands with wheels for easy repositioning. Mash Tun - Included Equipment - 7-inch touchscreen controller - Electrical installation with 40 kW electrical heaters - Hygienic pump - Water heating system - Heat exchanger for heating sparging water - Pipe heat exchanger with hot water recuperation - Stone wool insulation - Valves and fittings - Stand on wheels - Condensing lid with silicon seal and drain tu ...

Bright Beer & Fermentation Tanks Speidel 3 x 625 liters Top condition, vertical stainless-steel bright beer and fermentation tanks, made by Speidel in year 2019. Tank side walls are double jacketed which can be connected to a cold-water source for a product temperature control. Technical characteristics Manufacturer Speidel GmbH, Germany Manufacturing year 2019 Manufacturer’s type BBT FD-082-S Tank volume 625 litres Number of tanks 3 pcs Tank material Stainless steel 1.4301 (AISI 304) Cooling jackets Tank side Tank outside diameters 820 mm Tank height 1660 mm Tank empty weight 80kg

BREADING MACHINE, TITAN INTERNATIONAL, TYPE: TPM 630 Technical description: Serial number: 871038 Material: Stainless steel Mesh widht: 630 mm Hopper load capacity: 208 Lt Power supply: 380-440 V / 50-60 Hz Dimensions: 1850 x 1000 x 2000 mm

CNC bending machine Type: Biegemaster BM 6,15 Manufacturer: Sperr & Lechner Year: 2016 The bending machine can bend sheets up to a thickness of 1.5 mm steel sheet, in the case of aluminum sheet the maximum thickness is 2 mm. The maximum length of the bent sheet is 6200mm and the width is 915mm. Machine in good condition, fully functional, under power Find more here - / Contact us at -

NEW ENGINE BOW THRUSTER MOTOR HYUNDAI NEW,

Key data: 1350 mm, 1

- Working width 1350 mm - Rubberized pressure rollers - Roller table at the inlet and outlet - Belt feed speed 2.5-13 m/min, infinitely adjustable, perforated belt (prepared for vacuum tensioning device by external, not included drive motor) - Combi-contact roller-grinding unit (15 kW), with electr link pressure bar (element width 25 mm), belt speed infinitely variable from 2.5 to 20 m/s, belt length/width 2150/1370 mm, belt blow-off device, sanding shoe rest in the machine, pneum. Abrasive belt tensioning device - 1 rotating workpiece cleaning brush (0.75 kW) on the outlet side of the machine - Paintwork: RAL 5018 - Total connected load approx. 22 kW (36 A) - Operating voltage: 400 V, 50 Hz Technical data subject to actual equipment The sale is carried out on behalf of the owner from the current location, in the condition as existing, excl. Warranty.

Blower/fan Buehler design GR 360 degrees 240 m³/min, 210 mm water column Power 11 kw V-belt drive Output 455 x 355 mm Suction 450 mm Good condition, test run in our specialist workshop

General SKU231Y132 MakeWam TypeDLP2035G Year of construction2010 Main Features Motor3 KW Inlet diameter100 mm Width350 mm Specified Features - Lump breaker MaterialStainless steel 1.4307 (304L) Lump breakercheck Double shaftcheck Teeth height50 mm With hoppercheck bag dumping station InletDN100 OutletDN350 with valve Motor3,0 kW (400 V, 1430 rpm) Rotor speed60 rpm Information LocationBarneveld Mounted on wheelscheck With switchcheck Floorspace1,30 x 1,25 m Total height1,70 mLump breakersNew arrivalsWamBreakers > Lump breakersNew arrivalsBrand > Wam What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

A Bekum injection blow molding machine without molds is available. Industry: pharmaceutical, product: plastic bottles, operating bottle volume: 10ml, production capacity: 10ml: approx. 4800pieces/h, materials: PE/PP, machine dimensions X/Y/Z: approx. 6250mm/2200mm/2200mm, weight: approx. 12000kg. The rotary drive of the rotary table appears to be worn out. The injection cylinder of the unit is leaking and further leakages are present. An on-site inspection is possible. Expected to be available from July 2026.

MANUFACTURER: Trepko TYPE: XPG 40 MOULDS: 200- 250 Gr Bricks CAPACITY: 80 pcs per minute DESCRIPTION: Trepko XPG 40 Butter forming and wrapping machine 250 gram butter bricks with capacity 4800 pcs per hour. APPLICATION: Butter, Margarine and similar high viscousity products. PRICE: Please contact Used butter machines for sale, used butter packing machines, used butter wrapping machine for sale, used butter form fill seal machine, trepko butter machine, benhil butte packing machine, margarine packing machine, butter foil wrapping machine, margarine foil wrapping machine, used dairy machinery for sale, used dairy equipment for sale, used dairy machines for sale,

BUCHI speeddigester digestion block K-425 + Scrubber K-415 BUCHI K415 Dimensions (L x W x H): 417 x 347 x 526 mm Weight: 12Kg BUCHI K425 (K-425) Speeddigester Mineralization Block With accessories and glassware (see photos) Year of Manufacture: 2016 and 2017 In excellent condition

TOP mezzanine floor with equipment 33x30m 500Kg per m2 approx. 350 m2 2017 railing staircase TOP mezzanine floor with 10m wide barrier free Steel platform / industrial platform (top condition) 85,00 Net per m2 For sale is a high-quality mezzanine / steel structure built in 2017, ideal for industry, logistics, warehousing or production. The system is solid and suitable for high loads – perfect for expanding storage areas without building a new building. All the assets in the pictures are for sale. Shelving Racks/Conveyor Technology/ Stackers/ Ant/ Pallet Truck/ Bito Roller Rack/ Order Racking ⸻ Technical data: Total area: approx. 10 m x 33 m (≈ approx. 350 m²) Floor height (upper edge): approx. 4.10 m Lower edge of the stage: approx. 3.80 m Load capacity: 500 kg/m² Column grid: None clear width 10m Railing height: 1.10 m Staircase: available Ye ...

Size: 380 mm Equipments: cold glue, Exhaust, Paper mill max.lenght 380mm; max.thikness 40mm; max.hight 350mm; with mill and vacuum device

consisting of: frame shelf, loading magazine: 15-fold, max. loading length: 6,000 mm, automatic feeder, bending unit, power: 3.87 kVA, dead weight: 2,530 kg, with separate control unit, type: MBF372, switch/control cabinet system with cooling unit, Fabr. RITTAL

Heating block / mineralizer BLOC DIGEST 12 + RAT 2 SELECTA control unit Reference: BLOC DIGEST 12 digestion unit For 12 samples Automatic Precision Dry Bath Thermostat for 12 Reaction Samples, 45°C to 450°C RAT 2 control unit for standardized COD mineralizer With: 18 digestion tubes With smoke collector (be careful, 2 of them are chipped) In excellent condition

Key data: 230 mm

suitable for mitre cuts on one side Cutting area at 90° round 230 mm, flat 280x150 mm at 60° round 133 mm, flat 130x90 mm Cutting speed 40 + 80 m/min incl. Hydraulic material feed Chip clearing brush, coolant device, roller conveyor piece

Offer 26077 Technical data approx.: - Control for fully automatic workflow - ( feed , incision speed. Replenishment machine, etc. ) - In a separate control panel - Cutting range at 90° around 260 mm - flat 300 x 260 mm - Smallest material dimensions round / flat 15 / 10 x 15 mm - Smallest section length 10 mm - Remnant length automatic operation / manual approx. 130 / 40 mm - Saw blade dimensions 4400 x 34 x 1.1 mm - Cutting speed infinitely variable 20 - 140 m/min - Cutting pressure infinitely adjustable 0 - 10 m/min - Hydr. Material clamping with clamping pressure regulation - Coolant device - Total drive power 400 V / 8.0 kW - Space requirement approx. W 2700 x H 1600 x D 2450 mm - Weight approx. 1800 kg - Roller conveyor 1000 mm