b und c used for sale

IRCO Profimat 65.6/196.6

capacity 90 degrees: round: 255 mm capacity 90 degrees: square: 240 mm : 300 x 180 saw band length: 2.765 x 27 x 0,9 mm mm table height: 950 mm band speed: 18 - 110 m/min total power requirement: 1,5/1,8 kW weight of the machine ca.: 0,42 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 255 mm capacity 90 degrees: square: 240 mm : 300 x 180 saw band length: 2.765 x 27 x 0,9 mm mm table height: 950 mm band speed: 35 + 70 m/min total power requirement: 1,5/1,8 kW weight of the machine ca.: 0,42 t dimensions of the machine ca.: 1,23 x 1,7 x 1,75 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Butcher Boy BM1000 Ribbon blender Stainless, 1000l ribbon blender, forward / reverse, twin discharge doors, safety guarded top, on mobile frame, 3Ph

Original wrestler holders (Bekum) - Completely overhauled - Quick change function - Immediately available Original blow pin holders (Bekum) - Completely refurbished - Quick change funcion - Immediately available

Original Brass Thorn Shots (Bekum) - New - Screw thread - Immediately available - Thread M22x1 Original blow pin holders (Bekum) - New - Screw thread# - Immediately available - Thread M22x1

Piston Bergen B Gudgeon pin Ø145 mm RR No. 702513

Wide belt Sander Brand: Bütfering Model: AWS 3 Year of construction: 1989 Working width: 1350 mm 1 x Calibration roller 1 x Combi unit ( roller + grinding shoe ) 1 x Sanding shoe 1 x Cleaning brush Location of the machine: Customer location / Abroad

Equipment: 1 sledge feeder on the right 3 press modules á 180 kN = 540 kN 4 normal carriage units 1 narrow carriage unit Workspace: Wire thickness range: up to 10 mm Belt width: up to 100 mm Feed length: up to 250 mm Power: up to 132 rpm

Equipment: 1 sledge feeder on the right 1 two-point eccentric press 70 kN 4 normal carriage units 1 narrow carriage unit Workspace: Wire thickness range: up to 3.5 mm Bandwidth: up to 32 mm Feed length: up to 170 mm Power: up to 250 rpm

Equipment: 1 sledge feeder on the right 1 two-point eccentric press 250 kN 4 normal carriage units 1 narrow carriage unit Workspace: Wire thickness range: up to 5.0 mm Belt width: up to 40 mm Feed length: up to 320 mm Power: up to 132 rpm

used baler Manufacturer: STRAUTMANN Type: BaleTainer Year of construction: 2011 Machine no.: 407.00.360 for ramp loading specifications: Pressing force 60 t Main drive power 9.0 kW, Total connected load: 20 kW Bale dimensions 1,100 x 1,100 x 800 mm (W x D x H), 3 discs Bale weight up to 400 kg (3 discs) Binding 4-fold vertical Machine dimensions with task: 6,500 x 1,850 x 2,800 mm (L x W x H) Weight approx. 8,000 kg Control: S7-1200

used baler Manufacturer: STRAUTMANN Type: BaleTainer Year of construction: 2014 Machine no.: 413.00.016 for ramp loading specifications: Pressing force 60 t Main drive power 9.0 kW, Total connected load: 20 kW Bale dimensions 1,100 x 1,100 x 800 mm (W x D x H), 3 discs Bale weight up to 400 kg (3 discs) Binding 4-fold vertical Machine dimensions with task: 6,500 x 1,850 x 2,800 mm (L x W x H) Weight approx. 8,000 kg Control: S7-1200

used baler Manufacturer: STRAUTMANN Type: BaleTainer Year of construction: 2014 Machine no.: 413.00.024 for ramp loading specifications: Pressing force 60 t Main drive power 9.0 kW, Total connected load: 20 kW Bale dimensions 1,100 x 1,100 x 800 mm (W x D x H), 3 discs Bale weight up to 400 kg (3 discs) Binding 4-fold vertical Machine dimensions with task: 6,500 x 1,850 x 2,800 mm (L x W x H) Weight approx. 8,000 kg Control: S7-1200

sheet width: 1550 mm plate thickness: 4,5 mm pre-bending: 4,0 mm roll length: 1550 mm min. dia.: 190 mm roll diam. toproll: 130 mm weight: 1265 kg dimensions: 2670x1110x1050 mm Domestic equipments: - Central rollers via electric motor, planetary reduction gear and Gear drive driven - Swivel top roller - Main engine with brake device - Conical bending device - Mobile controller and foot pedal - CE mark / Declaration of Conformity Additional equipment: - induction hardened rolls - motorized rear roller adjustment - Digital display for back roller The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bevel helical gearboxes Manufacturer : Bonfiglioli Model : A 504 UH50 P90 LOE engine: Euromotori 1,1kw MS9016Year of construction 2008 NEW, unused from old stock for more information see pictures.

CLIPPER

Cold glue adhesive binder Planax Perfect Binder F II; condition as is; only tested for function; Max. Block length 380mm; Max. Block thickness 40mm; Max. Block height 350mm; with milling machine and suction. Perfect binder Planx Perfect Binder F II; condition as is; only checked on function; max.lenght 380mm; max.thikness 40mm; max.hight 350mm; with mill and vacuum device.

cutting diameter: 810 mm saw band length: 9500 x 54 x 1,6 mm cutting width: 1020 mm cutting capacity - flat: 1020 x 1020 mm cutting capacity - round: 1020 mm speed: 20 - 100 m/min sawing motor: 4 kW hydraulic motor: 2,2 kW total power requirement: 7,5 kW weight of the machine ca.: 5860 kg dimensions of the machine ca.: 4500 x 1700 x 2750 mm Accessories: • Inverter • hydraulical vice • automatical movement to the top via hydraulical cylinder. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tetra Pak TBA 19 250ml Base Filling Line Item #: Usm-169 Category Tetra Pak TBA 19 One Tetra Pak TBA 19 250ml Base Filling Line For Sale TBA 19 250ml Base Filling Machine, Version 30v Straw Applicator TSA 21 Packer TCBP 70 Conveyors & Paper Trolly Condition: Good

Broma Milk Roll Pusher Milchweck / dough piece pusher for manual assignment / one-man operation Pressure setting adjustable long discharge belt Tabletop unit DGUV V3 tested Connection 400V, 16A-CEE plug Used machine overhauled with 6 months warranty

3 sets of blowing moulds for KHS SIG Blomax 8: 1 complete set for 330 ml blowing moulds (8 pieces) 1 complete set for 1000 ml blowing moulds (8 pieces) 1 complete set for 1500 ml blowing moulds (8 pieces) Type of the blowing machine Blowing machine KHS / SIG type: BLOMAX 8 III year of manufacturing: 2004 capacity: max. 13.000 bph neck finish: PCO 28 - 1881

BHT INNOVA E3 Professional Bronchoscope Washing Machine INNOVA – Professional endoscope washing machine for practices and small clinics The INNOVA™ E3s is the world's best-selling BHT endoscope washing machine. This endoscope washing machine is compact, offers a high capacity for endoscopes or bronchoscopes. Depending on the treatment, a total of 10 to 20 endoscope reprocessings are possible daily. This makes it the perfect solution for general practitioners and small clinics that value safe hygiene, efficiency and reliability. Item condition: used

Standard equipment: robust, high-quality and inclined rotary hood for easy reading of the speed LED lighting quickly adjustable and ergonomic drilling depth stop infinitely variable speed control Connection cable with SCHUCO plug (1.2 m) Undervoltage outlets Drilling protection with electr. Hedge thermal overload protection Emergency Stop Impact Button Weight in kg: 44 Motor kW: 0,45 AC 230 V Speed 1/min: 250-3000 Drilling capacity mm: - Steel Ø 12 mm - Aluminium Ø 20 mm - Softwood Ø 40 mm - Drilling depth 60 mm - Projection 220 mm - Saeulen diameter 70 mm - usable table area (W x L) 300 x 250 mm - T-groove size number 2, distance 100 mm Dimensions width 14/26 mm - Spindle B 16 - Speed display digital - Drilling depth display: scale - Drill depth stop: quickly adjustable stop ring - Feed: by hand - FACTORY WARRANTY: 3 years - free domicile incl. packa ...

Bottle Filler, make WüMa, typ: BAD 20/4, with 20-valve pressure filler and 4-head crown capper, built 1977

approx. 560 pieces shelves for shelves / Berger, type Bert, 1m and 1,30m x 0,50m, 150kg, various - used - : Price per shelf: 9.-€ (net)! Minimum order: 50 pieces Manufacturer: Regalwerk / Berger Type: Bert Year of construction: approx. 2019 Depth: 50cm Width: approx. 1.30m = 540 pieces Width 1m = approx. 20 pieces Height: approx. 4cm Payload: 150kg Per pallet approx. 100 - 120 pieces Condition: good Available: as of now Location. Frankenberg / Saxony

offer 22489 Specifications: - Cutting range at 90° approx. 320 m - flat 320 x 320 mm - Material replenishment machine - Band saw blade dimensions 5095 x 34 x 1.1 mm - Cutting speed 10 to 120 m/min - hydr. Lifting – lowering the saw frame - upper stroke limitation of the saw frame - Cutting pressure infinitely adjustable - hydr. Material clamping pole - Chip conveyor screw - Coolant device - Discharge roller conveyor 2500 mm - Drive 400 V / 4.0 kW - Space requirement approx. W 2500 x H 1950 x D 2000 mm - Weight approx. 2200 kg

New Neu Anlasser / Bosch Starter 0001601007 Passend für die Motoren DEUTZ / MWM / Caterpillar Energy Solutions Typ TBG 620(k) und TCG 2020.

Dear customers currently we offer you a used tape saw of the brand F. Zimmermann. Here are the technical data of the machine: Work table: 750 x 750 mm Cutting width: 775 mm Super cutting height: 640 mm Table swivel: 45/10° Roll diameter: 800 mm Power: 4 kW Speed: 1,500 rpm - with engine brake Cutting speed: 1,400 rpm Door safety switch Machine is CE compliant! Dimensions: 1,370 x 850 x 2,950 mm Weight: approx. 850 Kg Price plus VAT, which will be shown separately on the invoice. If you have any questions, please do not hesitate to contact us.

Center height: 120 mm Center width: 450 mm Spindle passage/bore: 23 mm Board width: 100 mm Speeds: (12) 180 - 2240 min-1 Travel upper carriage: 140 mm Tailstock mount: MK 2 Quill stroke: 80 mm Motor power: 2.5 kW Connection: 400 V Dimensions approx.: 1300 x 880 x 1250 mm Weight approx.: 600 kg Equipment: Piercing device Quick release holder System Multifix, size Aa Machine light Coolant device

Manufacturer: BUSCH Type: RA 0250 D 5ZI QMZZ Capacity: 250 m3/h Vacuum pump BUSCH Typ RA 0250 D 5ZI QMZZ- USED - OVERHAULED Request a quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biala VAT No.: PL547-17-47-669 Phone 0048/33 812 58 60 fax. 0048/33 812 58 36 infointer-wiba.com.pl abc.inter-wiba.com.pl

Dear customers currently we offer you a used and very massive tape saw of the brand Bäuerle. Here are some technical data of the machine: Work table: 1,000 x 820 mm Cutting width: 765 mm Super cutting height: 520 mm Table swivel: 45° Roll diameter: 800 mm Power: 3 kW Speed: 1,400 rpm Dimensions: 1,500 x 820 x 2,500 mm Weight: approx. 900 kg All information without guarantee! VAT will be shown separately on the invoice. Shipping possible against surcharge. No guarantee and/or warranty on used machinery and accessories. If you have any questions, please do not hesitate to contact us.

Dear customers currently we offer you a used tape saw of the brand F. Zimmermann. Here are the technical data of the machine: Work table: 1,150 x 750 mm Cutting width: 775 mm Super cutting height: 640 mm Table swivel: 45/10° Roll diameter: 800 mm Power: 4 kW Speed: 1,500 rpm - with engine brake - motorized table and guide adjustment -Digital Cutting speed: 1,400 rpm Dimensions: 1,370 x 850 x 2,950 mm Weight: approx. 850 Kg Price plus VAT, which will be shown separately on the invoice. If you have any questions, please do not hesitate to contact us.

Made in Germany Saw blade size: 300 mm Cutting area 90° flat: 160 x 80 mm 45° flat: 120 x 80 mm 90/45° L-iron: 80 x 80 mm 90° U-iron: 160/NP 16 45° U-iron: 120/NP 12 90/45° round: 100 mm 2 saw blade speeds: 40 / 80 rpm. Drive power: 1.4 / 1.9 kW Dimensions L x W x H: 600 x 730 x 1700 mm Weight approx.: 390 kg with - stationary base frame - Cooling device - 1 saw blade installed Connection cable with 16A CEE plug. free domicile within Germany

Brochure production Bourg ARG-T, PA-T, TR-t Heften Bourg ARG-T Folds Bourg PA-T Scneiden Bourg TR-t Hohner stitching heads

Code: 0021 Brand: BOHR - AUSTRIA Model: 150/330 Sanding pad for belt sanding machine Universal sanding pad for belt sanders in graphite for solid wood and veneer - mm 330 x 150 Overall dimensions mm 330 x 150 x 100 h Weight kg 4

Size Dn 350 Pressure class Pn10/16 A150 Body Steel Gjs 400 used Tractor No. B21-047508 Disc Stainless steel Cf 8m P.max bar 16 Bar Temp Min -10 Max 130 Pneumatic double acting Year of construction 2021 Epdm session

Sollas Bandum 25, untested, as spare part donor

Belt rounder for rye bread. Used in good working condition

Belt moulder for rye bread used good working condition

Bucher MP 27 with the following accessories Double juice tub and pomace snail Juice tub with pump and level control. the following parts of the press were replaced in 2022: New press cloth and replacement cloth available. New drainage elements New drainage cores, split pins and discs New timers. Various new contactors in the control box as well as new installation of selector switch for drum rotation direction

gebrauchte Backbleche, wir haben auch neue Bleche

MONOBLOC Delta 816S & Minerva 200 WireHooding EXTREMELY LOW MACHINE HOURS

1) Drill pipe BTA Ø 43 x 2700 - 20 pcs; 2) Drill pipe BTA Ø 26 x 2700 - 40 pcs; 3) Drill pipe BTA Ø 22 x 2700 - 24 pcs;

Refer to code 1007 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Refer to code 1015 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

In-store oven WIesheu Type: Dibas Duo Dibas 64 blue S + Dibas 64 blue L 10+5 editions for 60×40 cm sheets digital control Self-cleaning program  Door with internal sliding mobile on wheels tested & cleaned, very good condition Specifications: Year of construction: 12/2017 (2018 Model) 400 V – 50 Hz Dimensions: Height: 215 cm Width: 95 cm Depth: 100 cm

Bütfering Wide belt sanding machine FBS 800 Product name: Wide belt grinding machine Type: FBS 800 Manufacturer: Gebrüder Bütfering Machine number: 83221 Year of construction: 1983 Condition: Used Technical details: - for solid wood - Grinding width: 800 mm - Strap width: 810 mm - Band length: 1,900 mm - Workpiece thickness: max. 90 mm - Feed speed: 10 and 20 m/min - Power requirement sanding belt drive: 15hp optional 20 hp - Feed drive: 1/1.5 hp - Cleaning brush: 0.75 hp - Weight: approx. 1,800 kg - Cleaning brush on the spout side (2x) - pneumatic belt tensioning Engine data: - Voltage: 380 V (note the direction of travel) - Current: A 2.8 / 22.4 - Power: 1.1 / 11.0 kW - Revolution: 1450 / U1=2,800, U2=3,060 Suction: - 3 x suction nozzles: diameter 140 mm, 160 mm, 200 mm Retrofitting/reassembly of a small table for acc ...

used cabinet press Manufacturer: Maschinenfabrik Bermatingen GmbH & Co. Type: DIXI 18 S Year of construction: 2013 Serial No.: 116398 Specifications: Pressing force: 18t Engine: 4 kW Connection voltage: 400/50 V/Hz Cycle time: 22 s Pressing time: 12 s Insertion opening: W x H 107 x 62 cm Height from floor: 98 cm Bale ejected: W x H x D approx. 110 x 70 x 70-80 cm Bale height adjustable Bale weight: 120 – 180 kg depending on the material to be pressed Machine width: 152 cm Machine depth: 95 cm Machine height: 197 cm Weight: 850 kg (Subject to errors in the technical data)

used cabinet press Manufacturer: Maschinenfabrik Bermatingen GmbH & Co. Type: DIXI 25 S Year of construction: 2012 Serial No.: 1113653 specifications: Pressing force: 25 t Filling opening: 1,200 x 670 mm (W x H) Height from the ground: approx. 940 mm Split egg filling opening: 1,070 x 260 mm Bale size: 1,200 x 800 x max. 800 mm Bale weight: up to 250 - 320 kg Drive power: 5.5 kW Cycle time: approx. 24 sec. Pressing time: approx. 13 sec. Binding: 4-fold - vertical with poly strap Machine dimensions: 1,600 x 1,300 x 3,170 mm (W x D x H) Machine weight: 2,180 kg Transport height: 2,240 mm (Subject to errors in the technical data)