b und c used for sale

properties: Used pallet roller conveyor from the manufacturer Bito Condition: Top condition with slight signs of use Color: gray Specialist dismantled and packaged Stock 177meters Price per meter Technical Data Plant consists of 73 segments 63 segments x 2.495mm 10 segments x 1.990mm Total width: 880 mm Conveyor width: 870 mm Axle distance: 95 mm Roller cross-section: 60 mm Material: steel, galvanized Height frame: 110 mm There are 3-4 brake rollers per segment. Roll diameter: 80mm pallet roller conveyor Due to the excellent workmanship of the pallet roller conveyor, your material glides gently to the destination, even under heavy loads. Tailor-made tickets for your intralogistics We are your competent contact for roller conveyors, belt conveyors, inclined conveyors or telescopes for loading and unloading your goods! We will be happy to  ...

properties: Used telescopic belt conveyor Condition: fully functional with traces of usage Ideal for fast material transport Expertly dismantled and packaged Color: Red 6 pieces in stock Price per piece Technical Data: Manufacturer: Budde Built: 09/11 Model: TGF02 hydraulic height-adjustable Total length retracted: 5,000 mm Total length extended: 11,500 mm Total width incl. control cabinet approx.: 1.240mm Total width: 950mm Belt width: 600mm Condition: good (used) Belt type: Smooth 4 pieces: built in 2008 2 pieces: built 2009 telescopic belt conveyor The telescopic belt conveyor is ideal in the picking zone for interlocking machines or workstations and to optimize the internal flow. During transport, the telescopic belt conveyor can transport sensitive and different sized containers, boxes or other packaging and article units to the feed or ...

Properties: Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packaged Roller Conveyor / Conveyor Conveyor / Rollers with Drive incl. acceleration motor / roller Model: Flat Belt Condition: Used Year of construction: 2013 Manufacturer: AMI Fördertechnik Total length: approx. 1860 mm Total width incl. motor: approx. 830 mm Total width without motor: approx. 695 mm Conveying width: approx. 600 mm Wheels/ axle spacing: approx. 65 mm Steel frame Frame height: approx. 120 mm Frame width: approx. 35 mm Colour: Light grey Including 2 SEW motors (0.37 KW) Feet to be ordered separately Stock: 6 pieces Price per piece The conveyor system has run until it was dismantled. Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high load ...

Manufacturer: Kelvion Medium: Water Glycol 70/30% Medium temperature: Inlet 90º C. Outlet 70º C. Cooling Capacity: 1500kW Air temperature: 32º C. (inlet) Fans: 8 pieces, 2.8kW, 400V, 50Hz, 3 wires, EC fans Speed control Terminal: Inlet 2xDN100, Outlet 2xDN100 Dimensions: LxWxH = 80,500x2400x1500mm Weight: 2200kg Sound pressure level: 63 dB(A) 10m distance, Year of Make: 2021 Condition: Very good, leakage and fans tested.

Compressor Bitzer 6H-25.2Y-40P,Used for freezing or plus-cooling

Compressor make BITZER Type 4H-15.2Y, 73.7 m3/h conveying volume For more information call +43 0664/1838175 or by emailing info@frigocom.net

Karl Schnell emulsifier Power: 9 kW

diameter 200mm, little used, dusted, good condition.4 Bolts with bolt spacing approx. 94mm, Hole circle diameter of the bolts approx. 133mm, the largest diameter of the short cone approx. 106mm, Drawbar in the middle. All information to the best of our knowledge but without any information. Special price

Demo machine from demonstration pool Enormously versatile cable slot machine thanks to individually adjustable, standing cutting knives. Cables are cut as standard by two knives penetrating the insulation on the side. The series was significantly improved in terms of safety in 2014 and now features a short feeder for thin cables and a long feeder for thick cables. The change is made in seconds by means of a rotary mechanism. The simplicity in the construction and the construction with two powerful, synchronously running rollers is left. With coarse gearing, even thicker cables are safely fed into the knives and transported further after the cutting process for removal. Blunt knives can be easily and cost-effectively sharpened with a standard grinding machine.

Bettcher Power cleaver / slicer Model: 39 Stainless frame, six product chutes on turntable, with stainless circular blade for slicing, ideal for slicing salami / pepperoni etc

TECHNICAL DATA: Max oscillation length mm: 100 Max depth of slots mm: 80 Spindle center distance min mm: 84 / max 1170 Spindle rotation rpm: 6.000 / 12.000 Processing: double sided Weight Kg: 2250

Bosch Rexroth Linear Cylinder Machine The machine is a special production for Bosch for its own use in the production process. The machine contains: Rexroth MSK050C-0600-NN-M1-UG1-NNNN 3-Phase Synchronous PM Motor Festo DGC-40-650-KF-Y5R-A 532449 H608 Rexroth EMC-063-NN-2 Schischke MY_1106 E2 - Voltage 380-480, 6 bar, 1300 kg, year of construction 2016 Condition: used The plant is located in Hildesheim and can be dismantled and picked up there by the customer. Dismantling and transport according to offer and agreement also possible by us. Complete plant closure, large selection of mezzanine, pallet racks, shelves, paternosters. High-quality industrial machines, lathes, grinding machines, manual machines

The scope of delivery includes: 01x Dumpster, second choice Manufacturer: SSI Schaefer Capacity: 770l Total width: approx. 1,350 mm Total depth: approx. 1,470 mm Total height: approx. 1,115 mm Material color: black Tyres: 4 tyres (2x braked) Material: Polyethylene (PE) Net weight: 68 kg Note: Useful width, useful depth are tapered downwards. General information about the article: This item is for pickup only. A further desired transport or a shipment of this article is associated with additional costs, which separately depending on the place of delivery or scope of delivery can be queried from us.

The scope of delivery includes: 01x Dumpster, second choice Manufacturer: SSI Schaefer Capacity: 770l Total width: approx. 1,350 mm Total depth: approx. 1,115 mm Total height: approx. 1,470 mm Material color bin: black Material color lid: green Tyres: 4 tyres (2x braked) Net weight: 68 kg Note: Useful width, useful depth are tapered downwards. General information about the article: This item is for pickup only. A further desired transport or a shipment of this article is associated with additional costs, which separately depending on the place of delivery or scope of delivery can be queried from us.

The scope of delivery includes: 03x Stacking container, used Manafacture: Thyssen Material color: hot-dip galvanized overall width: approx. 850 mm (outside-outside) Frame width: approx. 800 mm Usable width: approx. 780 mm total height: approx. 580 mm (floor - OK crane eye) Frame height: approx. 540 mm Usable height: approx. 400 mm Underride height: approx. 100 mm Total depth: approx. 560 mm (outside-outside) Frame depth: approx. 480 mm Usable depth: approx. 400 mm Stackable: Yes Crane eyelets: 4 pieces Diameter crane eyelets: approx. 40 mm Note: The stacking or transport containers can be bent. Furthermore, these dents, or other have damage.

The scope of delivery includes: 18x open fronted storage boxes, used Manufacturer: SSI Schaefer Type: LF 511 G ZW Design: recessed grip on one side Groove: f. partition walls Colour: blue Material: Polypropylene External dimensions LxWxH: 500x156x143mm Inside dimensions LxW: 448x123mm Usable height in stack: 127 mm Dimensions bulkhead opening: 85x60 mm (WxH) Capacity: 7.60 litres Stackable: yes Weight | pcs.: 0,785 kg Note: These are used stacking boxes. There may be scratches, dirt and Color errors may be present. Application: The open fronted storage boxes are suitable for storage of tools, screwdriving materials and other Hardware. General information about the item: This item is offered for pickup only. Any further desired transport or shipment of this item is associated with additional costs, which can be requested separately from us depending on the pl ...

The scope of delivery includes: 112x open fronted storage boxes, used Manufacturer: SSI Schaefer Type: LF 511 G ZW Design: recessed grip on one side Groove: f. partition walls Colour: blue Material: Polypropylene External dimensions LxWxH: 500x156x143mm Inside dimensions LxW: 448x123mm Usable height in stack: 127 mm Dimensions bulkhead opening: 85x60 mm (WxH) Capacity: 7.60 litres Stackable: yes Weight | pcs.: 0,785 kg Note: These are used stacking boxes. There may be scratches, dirt and Color errors may be present. Application: The open fronted storage boxes are suitable for storage of tools, screwdriving materials and other Hardware. General information about the item: This item is offered for pickup only. Any further desired transport or shipment of this item is associated with additional costs, which can be requested separately from us depending on the p ...

Properties: Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packed Roller conveyor/ conveyor technology/ rollers Manufacturer: AMI Fördertechnik Year of construction: 2013 Condition: Used Drive type: Flat belt Total length: approx. 3800 mm Total width incl. motor: approx. 850 mm Total width without motor: approx. 690 mm Conveying width: approx. 600 mm Wheels/axle distance: approx. 65 mm Roll diameter: approx. 50 mm Steel frame Frame height: approx. 120 mm Frame width: approx. 40 mm Including 2 SEW motors (0.37 KW) In stock: 2 pieces Price per meter The conveyor technology has run all the way to dismantling. Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics F ...

BACCI multiple oscillating mortiser mod. MX90 - 5+5 horizontal spindles - 2+2 vertical spindles - Selectable spindle revolutions motor per motor. . laps 1' 6000/12000 - Max. slot inclination 20° - Tilt to and from the outside – standard -7° + 30° - Max. distance between spindles 1280 mm - Matr. 228 - CE standards - Year 1999 - Complete with manual and CE declaration

Bosch cabinet equipment for Anker HIP/TEF The system is a Bosch in-house production carried out by HIP/TEF. The cabinet furnishings were designed for anchors and are in neat condition. If necessary, it may also be possible to convert the machine according to your own wishes. Manufacturer: HIP/TEF or Bosch Model: HiP/TEF12 Type: Cabinet equipment, possibly for anchors Voltage: 230 V Scope of delivery: cabinet furnishings plus parts of the blue box (see pictures) Condition: used Complete plant closure, large selection of mezzanines, pallet racks, shelving racks, paternosters. High Quality Industrial Machinery, Lathes, Grinding Machines, Hand Machinery Suppliers in China More items - new and used - can be found in our shop! International shipping costs on request!

Indramat DDS02.2-W100-BE12-01-FW Digital AC Servo Controller DDS02.2-W100-BE12-01-FW Indramat Digital AC Servo Controller 100A Cooling Type: Air More items - new and used - can be found in our shop! International shipping costs on request!

Cutter Manufacturer: Baader Stainless steel Capacity: 60 liters 6 knives

Oscillating mortiser with 2 benches BALESTRINI mod. 2CAP

This cable peeler is an immediately available used machine. It is workshop-tested and equipped with new knives. The Maxi 100 is an enormously versatile cable slitting machine with vertical cutting blades. No matter how thick or thin the insulation is, the cables are peeled to a tenth of a millimeter. Due to the strong interlocking, the cables do not slip, but are transported reliably. Damaged or thinner or thicker areas in the wiring harness are also well transported by the spring-mounted pull wheels. Blunt knives can be easily and inexpensively resharpened with a standard grinder. The Maxi 100 is suitable for practically any cable. Further information at BPS Recyclinganlagen GmbH at infoRecyclinganlagen.info

Cake and Cake Knife No. 298-W 3 Pieces NEW! Â Cake and Cake Knife with Wooden HandleStainless SteelWith Saw and Cutting Edge3 piecesNo. 298-WÂ Details see picture

Cake and Cake Knives 3 pieces NEW! Â Cake and Cake Knife with Wooden HandleStainless SteelWith Saw and Cutting Edge3 piecesNo. 298/WÂ Details see picture

Step chuck, precision chuck, bell chuck, step collet, ring chuck, collet sleeves, collet, tool holder, tool holder, collet sleeves -Manufacturer: Schaublin, Step chuck precision chuck mount MK6 -Size: 81 to 106 (see photos) -Overall dimensions: Ø 131 x 175 mm -Weight: 5.3 kg

Step chuck, precision chuck, bell pliers -Manufacturer: Schaublin, Step chuck precision chuck 7 pieces -Photography: see photos -Size: 21 to 50 mm, see photo parts list -Dimensions: Ø 56 x 120 mm -Submission/Price: complete -Transport dimensions: 230/115/H120 mm -Weight: 4 kg

Step chuck, precision chuck, bell chuck, step collet, ring chuck, collet sleeves, collet, tool holder, tool holder, collet sleeves -Manufacturer: Schaublin, Step chuck precision chuck 6 pieces -Photography: see photos -Size: 51 to 79 mm, see photo parts list -Dimensions: Ø 88 x 120 mm -Submission/Price: complete -Transport dimensions: 270/180/H125 mm -Weight: 6.6 kg

Step chucks, precision chucks, bell-shaped collets, collet sleeves, collets, tool holders, tool holders, collet sleeves -Manufacturer: Schaublin, Step chuck precision chuck 3 pieces -Photography: see photos -Size: 83 to 110 mm, see photo parts list -Dimensions: Ø 120 x 120 mm -Submission/Price: complete -Transport dimensions: 360/120/H120 mm -Weight: 4.2 kg

Alfa Laval BRPX 313 - 74 Separator used Motor 22 kW Concentrator Hydraulic capacity max 18,000 l/h

R22352/11 SCHWALBACH Cross cutter Model: BS 650 Built: approx. 1995 Working width: 650 mm Fully automatic Cutting length: 4 - 1000 mm Roll diameter: 300 mm max. Material: Soft and hard foils PVC laminated fabric 0.1 - 1mm Dimensions: 1000 x 600 x 1000mm (W x D x H) Available: by arrangement

Cross-moving trolleys for the lateral transport of passenger cars, e.g. from the paint booth to the adjacent drying cabin. Make : Wolf and Lutro Track width: 580 mm or 600 mm Dimensions: 630 x 580 x 120 mm (WxLxH) Material: Aluminum or steel Weight: approx. 8.5 kg or approx. 12 kg We also have older cross-slide trucks from LUTRO, Hildebrandt, Durst etc. made of sheet steel with larger gauges in stock, e.g. 810 mm, 880 mm and 1000 mm. We also have complete painting booths, drying booths and spare parts for painting systems in stock, e.g. Aggregates, lights, filter ceilings, entrance gates, roller doors, gratings, air ducts, etc. Please ask. Please ask.

AUTOMATIC END CUTT OFF and BORING MACHINE Type BALESTRINI I2F machine for chairs composed by 3 working units : - circular saw diam. mm.350 motor power hp 3 - boring unit boring head with 5/7 mandrins motor power Hp 3 max. working stroke of boring unit mm. 130 - vertical spindle for moulder motor power Hp 5,5 spindle diam. mm.30 pneumatic sliding carriage machine composed by 3 working units : 1) circular saw for cutting to length of pieces 2) boring unit equipped with multi bit drilling head 3) vertical spindle for moulding the machine may be used for a variery of job requirements , including the end cutting off , moulding curved surfaces and boring end cutting , or end cutting off amd moulding for finger jointing , or end cutting , etc.

Stacking mass (LxWxH)- 16m x 1.4m x 1.6m fully automatic drying via computer Heating capacity - 90 kW Top Condition

Cauldron standing on 4 wheels Manufacturer: Appointed Serial No.: -. Year of construction: 1971 Volume: 150 LTR. Material: 1.4541 In the pressroom: Operating pressure: 5 bar Capacity: 20 LTR. Operating temperature: 158 ° C In the loading space: Content: 150 LTR. Operating temperature: 100 ° C Dimensions: Bowl ø: approx. 540 mm Interior height front: approx. 640 mm Interior height rear: 580 mm L x W x H: 700 x 700 x 1,100 mm (with wheels) Containers with heating jacket with sloping to the spout, tank outer shape rectangular, marbled at top: 1 hinged lid approx. 600 mm diameter with hinge and handle on the front: 1 temperature display 1 valve 1 " 1 spout DN 32 with shut-off valve at the back: Heating valve

1 x Repiquet 2550mm wide x 820mm dia 4 roll inverted L Calender, Machine type: CALANDRE 4 CYL DE 820 x 2550, Machine no. 70-C9-87 Motorised nip adjustment, Peripherally drilled rolls, High pressure hot water hearing Bush bearings with flood lubrication, Hydraulic pre-loading to all rolls, Roll bending and unbending on roll 4, Cross axis on roll 3 and 1. Automatic bank sensors/control + camera system Traversing unit for roll buffing or sand blasting. 'Citroen' unidrive gearbox, type: SPECIAL, order no. 50491, Power 140/240 C.V. Speed 1500/2250, Output 46/59 with individual motor to each roll- Roll 1 and 4 - 130HP, Roll 2 and 3 - 240HP, Max calender speed 120m/min. Dual embossing station with approx 25 x embossing rolls (+ 5 x rubber pressure rollers) In very good condition.

Price per 2700 mm; continuous shelf BITO 5 levels per shelving system Continuous shelf BITO Manufacturer BITO Regaltechnik All prices are from Station World and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been legally signed. Mistake reserved. All technical details; Measurements, etc., are approximate information and are non-binding for the provider. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. Customer protection is agreed between the parties. The entire process of dismantling and loading as well as transport is ...

Bizerba counting scale with tare running weight device from Wilh.Kraut-Komm.-Ges. Maximum load 30 KG

We have 3 pieces of high-grade steel chimneys of the brand Hobatherm on camp model: Hobatherm high-grade steel chimney system Compactly Z-13.1.2-03.2274 Baucert construction year 2004 the chimneys were 2 years in a BHKW in use an application. the height of the chimneys amounts to approx. 20 m and they are provided with an isolation. price each, from camp 6,500.00 ? + VAT

Material: Steel We are going to overhoul this machine before the delivery. You can also get the entire system with all components you need.

Cooling unit Bitzer 4P-10.2Y-40P with condenser condenser for TK or Plus cooling. For more information call 00436641838175 or Info@frigocom.at

Exhaust gas generator to the cultivation in 16 l of Volvo Penta Industrial engine to the production of stream by use of the flue gas stream

NEW COOLING TUNNELS BY BAK-TEC for bread, buns, croissant, puff pastry, fish, meat an all other foods etc. available with PVC-belt or stainless steel mesh belt Example: BTI-K 400 -- Working width: 400 mm -- Infeed: 1000 mm -- Outfeed: 1000 mm -- Cooling chamber: 6000 mm -- COPELAND cooling unit 3HP -- complete in stainless steel -- Belt speed: 0-3 m/min. -- Variable speed with inverter -- Belt specification: Food grade PU belt -- Cooling temperature: 0-10 °C -- German CE-confirmation -- 1 year warranty -- with manual book in German / English -- OPTION: -- suitable 400 mm Enrobing machine -- Inspection / Test run and delivery with startup on request -- Leasing business possible -- Publicity prices for SÜDBACK fair 2016 -- Already working for large factories in Germany

CAP.: 25 CARTONS/MIN., 300-395 x 227-300 x 250-273 MM - L x W x H, 8 KW

CHP Schmitt enertec V12 Hi here sell a Schmitt enertec BHKW that is immediately ready for use and can also be tested prior to sale. Transport or construction is also possible. Electrical power: 300 kw with internal charge air cooler circuit 370 kw at external charging air cooler circuit Thermal power: 408 kw to 300 kw el. Required fuel: Bio-gas gas Sewage gas Landfill gas Special: Compact design in soundproofing hood with supply and exhaust air installed motor control cabinet to the frame: Engine one E2842 Leroy Somer operating hours: ca 100 Description: The CHP has been completely dismantled and rebuilt, which means the motor and generator have been overhauled. Control: PPU is by Deif SPS is by Telemecanique If you need replacement parts or have questions I am under to you provided: With friendly regards Andreas Peters Andreas Peters CHP GmbH & Co.KG Repairs of engines ...

Used chamber filter press / filter press Rittershaus & Blecher / R & B AEHIS /1200 x 1200 Plate size: 1200 x 1200 mm Useful length: 2500 mm Chamber number: 44 pieces Cake thickness: 30 mm Filter pressure: 16 bar Closing pressure: min. 380 bar / max. 440 bar Total filter area: 110.5 m2 Cake volume totalling: 1504 litres

Used chamber filter press / filter press Rittershaus & Blecher / R & B 1500 x 1500 Plate size: 1500 x 1500 Useful length: 9000 mm Chamber number: 129 Cake thickness: 30 mm Filter pressure: 16 bar Closing pressure: 380 bar Test pressure: 440 bar Operating temperature: 50 C Total filter area: 460 m2 Cake volume totalling: 6.2 m3 Motor voltage: 380 volts Plate material: PP Operation page: Right and left Plate transport: fully automatic

Used chamber filter press / filter press Rittershaus & Blecher / R & B AEH 800 x 800 Plate size: 800 x 800 mm Useful length: 3500 mm Chamber number: 64 pieces Cake thickness: 20 mm Filter pressure: 15 bar Closing pressure: Min. 240 bar / max. 300 bar Total filter area: 64 m2 Cake volume totalling: 640 litres