126,698 used machines on RESALE, but how to find them? Machine Search
Manufacturer: Busch Type: Mink MI 1502 BV Engine: 9.2 KW ; DS 400V Status: Used, Partial overtaking Performance: 6 months Suction power: 500 m3/h final pressure: approx. 250 mbar (abs.) Geraeusch Level: 85 dBa Zubehoer: additional suction filter (changed) ; Operating manual Delivery time: approx. 1-2 Where.; ready for use
Claw vacuum pump dry Manufacturer: Busch Type: Mink MM 1322 AV Motor: DS 400V Suction power: 300 m3/h End pressure: approx. 150 mbar (abs.) Performance: 12 months Condition: New ashoer: suction filter; Operating instructions Delivery time: short-term; ready for use
Claw vacuum pump dry manufacturer: Busch Type: Mink MM 1252 AV Motor: DS 400V Suction power: 250/300 m3/h final pressure: approx. 100 mbar (abs.) Zubehoer: suction filter; Operating instructions Delivery time: short-term; ready for use
4 drum pumps; pneumatically operated; suitable for 200L faessers; with base and distribution line.; Ready. At this point we allow ourselves to note that all offered machines are in our unrestricted possession or access and are present in our warehouse. Visits and demonstrations are possible on request in our premises. We would also be pleased to inform you about our complete stock, as only part of our portfolio is presented here.
PIN cutting machine Berrone one-sided for window manufacturing with pneum. Stop 1. trimming saw 2. pivot cutters top / bottom 3. Groove cutter L x W x H: 250 x 200 x 200 cm Year of construction 1983 Weight approx. 750 kg The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
Checked and ready for use. At this point we allow ourselves to note that all offered machines are in our unrestricted possession or access and are present in our warehouse. Visits and demonstrations are possible on request in our premises. We would also be pleased to inform you about our complete stock, as only part of our portfolio is presented here.
New! Construction support SFS B30, DIN EN 1065, 1,80-3,00m painted, 14,60kg/pc., new á 28,58€ net SFS B35, DIN EN 1065, 2,10-3,50m lacquered, 16,20kg/pcs., new á 30,59€ net SFS B40, DIN EN 1065, 2,30-4,00m lacquered, 18,00kg/pcs., new á 35,38€ net 5mm head and foot plate, load capacity can be found in the attached data sheet. On request, the supports can be provided with your company logo from an order volume of 500 pieces! European Community product All prices excl. VAT and transport Sale reserved! If you have any questions, please call 0049 176 70044689, Mr. Becker Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Meisterbetrieb Andreas Becker e. Kfm. Office/ warehouse address: Birkenstrasse 15 89185 Humlangen- Hüttishe ...
New! Construction support SFS B30, DIN EN 1065, 1,80-3,00m painted, 14,60kg/pc., new á 28,58€ net SFS B35, DIN EN 1065, 2,10-3,50m lacquered, 16,20kg/pcs., new á 30,59€ net SFS B40, DIN EN 1065, 2,30-4,00m lacquered, 18,00kg/pcs., new á 35,38€ net 5mm head and foot plate, load capacity can be found in the attached data sheet. On request, the supports can be provided with your company logo from an order volume of 500 pieces! European Community product All prices excl. VAT and transport Sale reserved! If you have any questions, please call 0049 176 70044689, Mr. Becker Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Meisterbetrieb Andreas Becker e. Kfm. Office/ warehouse address: Birkenstrasse 15 89185 Humlangen- Hüttishe ...
We suggest Bitzer compressor. All compressor is working: Bitzer unit with 4G-20,2Y-40P 4pcs - 4000Eur Bitzer compressor 4TCS-12,2Y - 600Eur Bitzer compressor 4CC-6,2Y - 400Eur Bitzer compressor 4P-10,2Y - 350Eur Bitzer compressor 4V-6,2Y - 350Eur Copeland: D4SL1-150X-AWM - 4pcs - 700Eur D3SS1-100X-AWM - 3pcs - 500Eur ZB58KCE - 2pcs - 250Eur. All compressor is working. NEW GeaBock compressor very good price: Compressor HGX 44e/565-4 - 5pcs - 1000eur Compressor HGX 44e/665-4 - 4pcs - 1100eur Compressor HGX34/210-4ML CO2 T - 7pcs. - 1500eur
Universal CNC lathe BOEHRINGER NG 200 Manufacturer: BOEHRINGER Type [ type]: NG200 CNC double Control unit: Siemens 840D Year of construction[construction year]: 10/2001 Rotating diameter: 290 mm Turning length: 850 mm Control: SIEMENS 840 D Orbital diameter over bed: 600 mm Revolver 1 Revolver 2 Counter spindle Counter headstock Tailstock C-axis Powered tools Automatic machine doors – newly retrofitted Z-axis resolution: 40nm (2nm interpolated) Travel in Z: 740mm Rapid traverse speed in Z: 25 m/min Centering tip SK 30 X-axis resolution: 125nm (8nm interpolated) Travel in Z: 220mm Rapid traverse speed in Z: 25 m/min Distance between main and counter spindle: 1034mm Drive power: 30-72 kW Torque: 662 Nm Speed range max.: 4500 rpm Spindle head: Size 6/8 DIN 55026 Spindle diameter in the front. Bearing [spindle]: 120 mm Chuck diameter: 200-315mm Spindl ...
Machine for stripping cables - see picture
The new automatic version of the Horizon Brown 425 cutting line has been designed to reduce cutting times and facilitate the operator in machine adjustments. The machine is easily adaptable to customer requests for the wide range of accessories provided in its production. MAIN FEATURES OF THE MACHINE: - easy-to-program machines - blade diameter Ø 425 mm - maximum cutting capacity Ø 143 mm - rapid movements with brushless motors - blade rotation with controlled speed with inverter - electronic control of the cutting table rotation movement - power wagon position control with magnetic stripe - 1550 mm feed wagon stroke with the possibility of automatic repetition - CNC or IMS controlled cutting angle - hydraulic adjustment of the vertical jaw - hydraulic adjustment of the horizontal jaw - possibility of connection with PC to optimize the cycle
Pressing plate of BRUDERER BSTA 41 type W x D x H = 660 x 550 x 95 mm Hole = 500 x 100 mm
BDK S-1200 Laminar-Flow Safety Cabinet Principle The safety cabinet is a laboratory device in which there is a largely low-turbulence (laminar) displacement flow in the working area. The air flowing through the working area, as well as the exhaust air, is cleaned by a high-performance HEPA filter. Scope of services and equipment - Model version The safety cabinet is produced in three different sizes, as BDK-S 1200, 1500 and 1800. - Air monitoring The air flow velocity in the circulating air (downflow working area) and exhaust air (inflow exhaust air) area is monitored with flow probes. Any faults that occur are indicated by an indicator light and signal horn. - Lens monitoring The viewing window made of safety laminated glass is provided with a weight compensation system and can be moved manually very smoothly and continuously. If the lens is not in the working ...
Properties: Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packed Manafacture: Budde Condition: Used Drive type: motorized vertical shaft Total length outside: approx. 1560 mm Total length inside: approx. 1850 mm Total width incl. motor: approx. 800 mm Total width without motor: approx. 470 mm Conveying width: approx. 440 mm Material: steel, plastic Colour: light grey Includes feet (height adjustable) and motor gearbox (North 0.55 KW) Ejector/ Smuggler/ Roller conveyor Due to the excellent workmanship of the roller conveyor, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics For roller conveyors, belt conveyors, inclined conveyors or telescopes for loading and unloading your goods, we are your competent partner! We would be happy to pro ...
continuous teflon belt grill suitable for thermo oil heated with lower and upper belt - bottom and top grilling belt width 600 mm adjustable speed product height electrically adjustable nett frying length 6.800 mm total length 9.300 mm total width 1.500 mm weight : 5.700 kg
Berstorff Three Roll Calender Manufacturer: Krauss Maffei Berstorff 2650mm wide x 650mm (26”) diam. Effective working width 2600mm (Roller Head Die Width) Rolls Configuration: ‘I’ shape Rolls Type: Peripherally Drilled Drive: Right Hand Transmission: Direct Drive by Cardan Shafts Motors: 3X 75 KW, 2600 RPM, 50 Hz Nip Adjustment: Hydraulic (Berstorff patented) Fixed roll: Roll 2 (middle roll) Adjustable roll: Roll 1 and 3 (upper and lower roll), Max Roll gap is 80 mn Cross axis: Roll 1, 2 and 3, Hydraulic operated, max. 25 mm Pre-loading & Roll Bending: Available Rolls Speed: Variable, 0.5-10 m/ min Bearings: Antifriction Roller Bearings Electricals/ Controls: PLC Complete with motor and controls Year 2009
Claw vacuum pump Dry Manufacturer: Busch Type: Mink MM 1322 AV Engine: DS 400V Suction power: 300 m ³/h Discharge pressure: approx. 150 mbar (abs.) Warranty: 12 months Condition: Near Mint Accessories: inlet filter; Operating instructions Delivery time: in the short term; ready for operation
Claw vacuum pump Compressing dry Manufacturer: Busch Type: Mink MM 1402 AV Engine: DS 400V Suction power: 400 m ³/h Discharge pressure: approx. 200 mbar (abs.) Accessories: inlet filter; Operating instructions Delivery time: Please enquire; ready for operation
Cantilever rack, one-sided, frame height 2.60m height, 80cm deep arms, 750kg per arm, hot-dip galvanized - new - : Price from location incl. loading! Price: 1.515.-€ (net) Price transport / packaging costs within Germany (without islands): 400.-€ (net)! Of course, you can also build longer or shorter shelving units out of them by omitting or buying additional frames (or also by using different center distances), this example with 4 frames is only the most common shelving solution! A cantilever racking system, hot-dip galvanized, consisting of: German brand manufacturer, new product Description: - Shelf stand on one side 2,600 mm high, hot-dip galvanized - Base and arm depth 800 mm - With 3 height-adjustable shelf arms each - Load capacity at centre of gravity 400 mm - 750 kg per arm / 2..250kg per stand with 4 stands per arm level 4 x 750 kg = 3,000 kg P ...
Rotary vane compressor manufacturer: Becker Type: VT4. 25 Voltage: 400V/50 Hz Warranty: 12 months Status: Rebuilt and new painted Pressure capacity: 25 m ³/h Discharge pressure: Max + 1 bar (rel) Accessories: owner's manual; ready for operation
Many thanks for your interest on our second hand machines, please find follow our offer: manufacturer: Bindler & Schneider Type: ZE 90/10-10-F/SL (Gear pump) Year of manufacturing: unbekannt output capacity: 6000 kg /h pieces: 1 different: guter Zustand I offer this machine in as-is where-is condition ex Warehouse Hess. Lichtenau, unpacked
AUTOMATIC COPY SHAPER machine type BALESTRINI JUNIOR second hand machine conditions : Excellent, machine like new CE mark : YES with tools : YES with safety protections and instruction booklet machine composed by n. 02 working units max. working length mm. 1400 max. working height mm. 180 max. working width mm. 500 tools rotation speed rpm 8400 feed speed of carriage : from 0,5 to 15 mt/min retun feed speed carriage mt.min. 70 spindle motors power Hp 10 x 2 hydraulic pump motor power Hp 4 volt. 380/50
Properties: Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packed Roller conveyor curve 90° Model: Round belt Condition: Used Year of construction: 2013 Manufacturer: AMI Fördertechnik Total width outside: approx. 2100 mm Total width inside: approx. 1130 mm Conveying width incl. motor: approx. 700 mm Conveying width without motor: approx. 600 mm Roller spacing/ axle spacing: approx. 80/130 mm Steel frame Frame height: approx. 125 mm Frame width: approx. 35 mm Colour: Light grey Including SEW motor (0.37 KW) Includes side guide Feet to be ordered separately In stock: 4 pieces Price per piece The conveyor technology has run all the way to dismantling. Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tai ...
Table size: 1000 x 490 mm traverse path x/y/z: 800/510/500 mm spindle retainer: ISO 40 ISA kl. / gr. Table/spindle distance: 120/620 mm spindle speeds: 40-6000 rpm number of tool stations: 22 pieces feeds: x/y 1-3200 / z 1-2000 mm / min rapid traverse: x/y 1-3.2, z 1-2 m / min. Supply: 380 V, 19 kW space: 2850 x 2150 x 2600 mm weight: 3800 kg
Used compactor manufactured by HOSOKAWA BEPEX GmbH, model L200/50P. Year of construction: 1996. Roll dimensions: 200mm x 5mm Productivity: approx. 50 kg/h Material of contact parts: stainless steel AISI 304 The set includes a tank made of stainless steel: non contact parts made of AISI 304; tank made of AISI 316L Total capacity: 380 liters Working capacity: 350 liters Technical characteristic: Press force: 150 kN Roll diameter: 200 mm Roll width: 50 mm Drive power: 3 kW/inverter Roll cooling: no Direct press force measurement: yes Automatic press force control: no Adjustable roll gap: no Dust free construction: covers (modernization) Gas tight construction: no WIP/CIP design: no
Qty 1 x Berstorff 4 roll inverted L calender, serial number: 11892-907, original year 1966 (but upgraded/refurbished in 2012), Roll sizes: 850mm dia x 2440mm wide, peripherally drilled rolls (steam/high pressure hot water heating), motorised nip adjustment, cross axis, roll bending, hydraulic preload etc. 2 speed Unidrive gearbox on universal couplings, Speed setting 1: 33.7 rpm, speed setting 2: 16.85 rpm, with 98kW DC variable speed motor fitted to each roll. Operator controls renewed recently (Siemens S7 plc) Downstream equipment: Set of 5 x cooling drums Beta thickness measuring device Edge trimming unit Menzel length cutter 3 position winder Complete and in very good condition. 2 spare rolls.
COMPLETELY WORSHOP REFURBISHED ! Min. size 350 x 500 mm / 920 x 1260 mm Speed of 5,000 c / h Quick clamping system in the stripping station Paper 80 g / m2 Cardboard max 2000 g / m2 16 heating zones Temperature 50 ° to 160 ° Autoplaten concept Stripping
Stock number U2275-2 Used stainless steel vertical pressure filter cartridge type by Begerow (Germany). Model M4923001. Volume of tank 1340 l. Tank is designed for work on pressure up to 6 bar and temperature up to 140 C. Material - stainless steel AISI 316L. Filtr has 4 columns for mounting filtrating cartriges. Includes stainless steel feeding pipe and valve with manometer. Mounted on 4 stainless steel legs.
Producer: Bolz Producer: Sinks Allgau Capacity: 500 l The tank is equipped with 2 probes to measure the filling level.
Used centrifuge Speed power: 3700 RPM Maximum operating speed: 3700 RPM Drum diameter: 350 mm Drum wall thickness: 10 mm Drum material: 1.4541 Max capacity: 75 dm³ Max. Density: 1.5 kg / dm³ Maximum operating temperature: 40°C Weight: 1.700 kg Overhauled, with Rotodiff
Preparation of crystal sugar We can offer you a complete system for dissolving and pasteurizing crystalline sugarThe device includes:-Pasteurizer KZE , producer: Schmidt, year: 1997 3-reservoir, double coat (heating-cooling) capacity of one tank: 800 l.dimensions: the height of the tank: 1100 mm, diameter: 1400 mm, total height: 2200 mm
Nova BioProfile Flex Automated Cell Culture Analyzer BioProfile is an automated cell culture analyzer that measures up to 15 important cell culture attributes. By combining up to five separate instruments into one easy-to-use instrument, BioProfile FLEX simplifies workflow and saves time, labor, and operating costs compared to multiple instruments. The FLEX automatic sampler takes samples from its two fermenters and transmits them to the measuring unit of the FLEX analyzer. The data obtained from the FLEX autosampler were compared with data taken manually from the reactor and their statistical analysis was performed. Specifications Sample analysis time: 2.5 minutes (gases only – PO 2 + PCO 2 ), 4.0 minutes (Chemistry/Gas and Osmolality), 6.25 minutes (all 15 tests), Operating temperature range: 15-30 °C (59-86 °F), Relative operating temperature Humidity range: 20-85 ...
For sale is a complete frame sawmill as listed below. (Single sale also possible, please register in advance) An annual cut of up to 60,000 solid cubic metres of round timber is possible with the system. With a log length of 4 metres, the current annual cut is approx. 30,000 solid cubic metres in 1-shift operation. The facility is still in operation and can be visited by appointment. Machine Listing: 01. Log feed 4-strand SPRINGER with separator with roller conveyor with log turner with insert 02. Clamping carriage remotely controlled ESTERER Type: FHZ SV Built in 1990 Track width: 110 cm with auxiliary wagon with cabin 03. Frame saw ESTERER Type: HDS Built in 1973 600 stroke max. passage 71 cm with splitting wedge with drive motor 132 kW with front gear with hydraulic saw clamp with saw blades with hook-up 04. Frame roller conveyor Mayrhofer w ...
M. No.: C0851000161 Equipment / Additional information: Ultimate pressure: 150 hPa(mbar)
Cylinder mill for very fine grinding, consisting of three pairs of cylinders, new machinery, stainless steel construction, never been used, complete with product feeder, three electric motor and hydraulic control unit
Casing-in machine Hunkeler (Joba) Model BBA Year 1990's Working width 350 mm Thickness 1-100 mm (adjustable) Available Direct
The scope of delivery includes: 01x Stacking crate / Euro container, used Manufacturer: Bekuplast Type designation: Basicline Material colour: grey Product dimensions: 600 x 400 x 320 mm (LxWxH) Internal dimensions: 567 x 367 x 317 mm (LxWxH) Volume: 64.5 l Weight: approx. 2.28 kg / pcs. Material: Polypropylene Handles: closed Front wall: foldable on one side Side version: closed Bottom finish: smooth, closed Note: -Insensitive to acids and alkalis -Cold and heat resistant It is a second-hand item, there may be scratches, dents and traces of use exist. The price shown is the same as the pick-up price incl. VAT per piece! General information about the product: This item is available for pickup only. A further desired transport or a dispatch of this article is associated with additional costs, which can be queried separately depending on the place ...
3000 x 1500m 10 kW Fiber laser cutting machine
HORIZONTAL LATHE B1200 BIGLIA SWITCHABLE LENGTH 1200 MM TURNING DIAMETER 700 MM BAR STEP 80 MM SPINDLE POWER 30 KW NUMBER OF REVOLUTIONS/MIN 2800 Z-AXIS STROKE: 1200 MM Tailstock CHIP CONVEYOR HYDRAULIC BEZEL NUMBER OF TOOL POSTS 12 CONTROL: FANUC 21i-TB
Marchesini BA300 Continuous motion cartoner Automatic Bottle scroll infeed system Guk style leaflet folder Carton size range Width 25-100 Height 13-70 Length 78-150 Maximum mechanical output 250 CPM actual speed dependant upon nature of the product.
Small shredder for various tasks such as old cables, plastics wood, etc. With hydraulic, electronically controlled feed. Drive 18.5 + 2.2 kW (rotor + feed). Rotor shaft with connectors for connecting a cooling device (e.g. when used for NYM old cables. The machine is 1 year old and little used from our demo machine inventory. The machine is offered with a one-year used machine warranty.
Mobile compressor for the evacuation of natural gas from pipelines for maintenance and repair to offer. There are only few trucks of this worldwide. This truck is fully operational and used to be operated only by Gas Industryi n the past! For first details please refer to attached file. The truck is located in the north of Germany (between Bremen and Hanover). A visit is possible by appointment. Further details can be provided on request. - The machine has been completly refurbished in 2022 (documentation/ certification available -> see attached picture) - The truck/ machine is fully operational - Reason for replacement was the truck/ car body ( wanted to have a modern truck – nothing to do with compressor) - Current replacement price of compressor: around 4 Million EUR – delivery time around 36-40 months - Optionally we could provide an engineer from Gas Industry for machine ...
MAXIMUM SWITCHABLE LENGTH: 1520 MM MAXIMUM TROLLEY DIAMETER: 600 MM MAXIMUM SWITCHABLE DIAMETER: 540 MM AXLE STROKE X1:555 MM X2 AXIS STROKE: 185 MM Z-AXIS STROKE: 1595 MM STROKE Z2:1640 MM Y-AXIS STROKE: 160 (+-80) MM AXLE STROKE A: 1565 MM C1-C2 AXIS STROKE: 360 º (0.001) B-AXIS STROKE: 15-240 º (+-120) SPINDLE SPEED: 2800 RPM SPINDLE NOSE: ASA A2 # 8 CONTROL: FANUC 18I-TB COMPLETE WITH BEZEL SMW-AUTOBLOK
MAXIMUM SWITCHABLE LENGTH: 1520 MM MAXIMUM TROLLEY DIAMETER: 600 MM MAXIMUM SWITCHABLE DIAMETER: 540 MM AXLE STROKE X1:555 MM X2 AXIS STROKE: 185 MM Z-AXIS STROKE: 1595 MM STROKE Z2:1640 MM Y-AXIS STROKE: 160 (+-80) MM AXLE STROKE A: 1565 MM C1-C2 AXIS STROKE: 360 º (0.001) B-AXIS STROKE: 15-240 º (+-120) SPINDLE SPEED: 2800 RPM SPINDLE NOSE: ASA A2 # 8 CONTROL: FANUC 18I-TB COMPLETE WITH BEZEL SMW-AUTOBLOK
Hot counter + refrigerated counter on undertable with casters Dimensions undertable: H95 x W193 x D76 cm Hot Counter BETEC Execution: Hot counter GN 2/1 230V / 50 Hz Heat output up to 90°C the hot counters are lit up Total dimensions: H55 x W75 x D78 cm Year of Make: 2019 Chilled distribution depot: Bartscher Batida 2/1 Refrigerated display case / cold counter 2 x GN 1/1 with squared glass version 406051 This refrigerated display case / show display case from Bartscher is a guarantee for your good product presentation. Dimensions (W/D/H) cm: 75 x 77.5 x 60 cm Weight: 78.6 kg Capacity: 1 x GN 1/1-6.5 cm height (53x32.5cm) Technical services: Temperature range: +6ºC / +10ºC Version with convection cooling including lighting Connection: Connected load: 230 V /0.29 kW 1 phase / 50 Hz / 16 A with plug in Schuko design ...
maximum number of results exceeded
please refine your search
