b und c used for sale

General SKU345S530 LocationBarneveld MakeFima Verfahrenstechnik (DE) TypeTZT-1300 Pressure Working pressure3 Bar Main Features MaterialStainless steel Motor55 KW Inlet diameter40 mm Specified Features - Basket centrifuge Basket centrifugeHorizontal Capacity800 Ltr. Basket sizesdia. 1300x600 mm Wall thickness15 mm Max. loading weight200 kg Mechanical operatedcheck Motor± 55 kW With variable speed drivecheck Max. basket speed900 rpm MaterialStainless steel 1.4571 (316Ti) Information No.Z00033 Year of construction1994 Mounted on framecheck Floorspace3,4x2,5 m Total height2,55 m Weight± 9000 kg Extra SpecificationsFilter area: 2,4 m² Max. temp.: 100 °C Product outlet: DN40 Product inlet: DN40 with: braking resistor: Frizlen, type: FA 3247002, 37,7 kWBasket centrifugesFima ProcessCentrifuges > Basket centrifugesBrand > Fima Process What you can expect from F ...

KITZINGER contino 250BS1 bucket washing system, still in original packaging, System structure:, 1. 2000mm inlet table, wash material transport via scan belt chain with cams every 500mm, fixed pass-through height 400mm height (hold-down device adjustable with M6 threaded rods), bottom partially open with space for 1 E2 container as dirt trap, horizontal pass-through opening downwards, self-draining bucket bottom, 2. Washing 1000mm long, tank 400l with large outer filter housing, EDUR stainless steel circulation pump 4kW 1500l/min at 1.5bar, heating 20kW steam directly with Spirax Sarco mixing nozzle, 3. Rinse with fresh water, hourly requirement 300-400l (adjustable), length 800mm, including steam countercurrent, Inlet table 2000 mm Washing 1000 mm Rinsing 800 mm Neutral area 500 mm Blow-off 1800 mm Outlet 2000 mm Total length 8100 mm, KITZINGER contino 250BS1 bucket washing system, pump  ...

Fully automatic cup filling and lid closing machine which can be used for packing soft and easy to pump products like butter, herb butter, etc. into tubs and close the cup with a snap cap cover (no sealing). The machine was rebuild in 2004. Rectangular with round corner format, ± 95 x 60 mm for filling ± 80 up to ± 150 gram.The butter is feed with an ± 200 liter hopper. Stainless steel dosing station. The speed can be adjusted by a frequency converter up to 80 cups per minute. Outfeed conveyor. Vacuum pump with the machine (Busch). Control panel with frequency converter., Type of Machine: Butter tub filling and lidding machine, Capacity: ± 700 Kg/h, Capacity (Units): up to 80 packages per minute, Packaging Weight: ± 80 up to 150 gram, Packaging Size: Rectangular with round corners, ± 95 x 60 mm, Year of refurbishing: R2004, Motor power: 2,2 kW, Weight: ± 1.400 kg

General SKU431X1350 LocationBarneveld CEcheck MakeGeppert Band Conveying Systems Main Features Motor0.25 KW Length3800 mm Width140 mm Specified Features - Conveyor belt MaterialPlastic, Stainless steel Conveyor beltcheck Elevator beltcheck Belt width140 mm Belt length3800 mm With carrierscheck Carrier height100 mm With motor0,25 kW, 219-241/380-420 volt, (Ex) Belt speed137 rpm Outlet height1300 mm Information TypeGES-50-K-W Mach.No.1509113 Year of construction2015 Mounted on framecheck Inclined on framecheck Floorspace3,20 x 0,80 m Total height2,20 mConveyor beltsGeppert-Band GmbHConveying systems > Conveyor beltsBrand > Geppert-Band GmbH What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlan ...

Fermentation belt carrier tilting planks with trolley32 pieces tipping planks with trolleyManufacturer: RingoplastType: Baked goods CombiDimensions: 580x390x48 mmInner dimensions: 567x377x45 mmMaterial: PolypropyleneWeight: 950 gWe have several in stockShipping costs please ask for details see picture

Year of construction/ retrofit 1995/2025 Bag in Box packaging machine (cartoner) Bosch, type CBK 409.1 BL / SCK 2500, year of construction 1995 (retrofit 2015) Folding carton formats (LxWxH): 143 x 60 x 218.5 mm 143 x 51 x 220 mm 143 x 46.9 x 219 mm 138.4 x 49.9 x 173 mm Condition: fully functional, well maintained Machine weight: 5600 kg Current formats: see documents Instruction manual: see documents

Absolute encoder -Hollow shaft: Ø 12 mm -Dimensions: 80/85/H60 mm -Weight: 0.5 kg

General SKU290P488 LocationBarneveld MakeHeinkel Aktiengesellschaft (DE) TypeHF 600 No.1083/11 Main Features MaterialStainless steel Motor22 KW Inlet diameter600 mm Specified Features - Basket centrifuge Basket centrifugeInverting filter centrifuge Rubber linedTFE Capacity52 Ltr Basket sizesdia.600mm x220mm Max. loading weight65 KG Liquid outlet125x125mm Hydraulic drivefor discharge With hydraulic unitcheck Motorfor rotation 22 KW, 400 Volt (EExde IIC T4) Max. basket speed1936 rpm Max. temperature100 degr.C, MaterialStainless steel 1.4571 (316Ti) Information Year of construction1988/2003 With switchgearcheck Floorspace3,0x1,0 M Total height1,5 M Weight2700 KGBasket centrifugesHeinkelCentrifuges > Basket centrifugesBrand > Heinkel What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to a ...

Sanding line with working width 1300 mm, constant working height. Line consisting of: - Undersander 2 sanding units 1 x Combi unit with contact roller 60? shore and segmented shoe, motor 22 kW 1 x Segmented shoe, motor 15 kW 1 x Brush Vacuum workpiece suction, 7.5 kW motor -Intermediate transport: 4200 x 1300 mm -Top sander 2 sanding units 1 x Combi unit with 70? shore contact roller and segmented shoe, 22 kW motor 1 x Segmented shoe, motor 15 kW, 1 x Brush Vacuum workpiece suction, motor 7.5 kW Feed speed: infinitely variable Table spring-loaded or fixed adjustable

General SKU249Y198 LocationBarneveld MakeComi-Condor Main Features MaterialStainless steel Motor0.75 KW Inlet diameter15 mm Specified Features - Basket centrifuge Basket centrifugecheck Perforated basketcheck Basket sizesø 150 x 250 mm Max. loading weight5 kg Liquid outletDN25 Motor0,75 kW 400 V 1350 rpm (Ex) With variable speed drivecheck Max. basket speed3000 rpm MaterialStainless steel 1.4306 (304L) Information Serial2371 Magento base g_extra_specificationsdia 250mm Information TypeTaurus No.2371 Mounted on foundation platecheck Mounted on wheelscheck With switchgearcheck (as is) Floorspace0,7 x 0,6 m Total height0,9 m Weight300 kgBasket centrifugesComi-CondorCentrifuges > Basket centrifugesBrand > Comi-Condor What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination ...

- Producer Bürkle - Type CASC 1400 - Year of construction 2001 - Working width 1350 mm - Working height 900 + - 20 mm - Part height ~ 5 - 100 mm - Operating side, right - Roller for putty EPDM, 240 mm - Qick changes system for roller - Metering roller 198 mm - Smoothing roller hard chromed 240 mm - Belt transport system - Length ~ 1.450 mm - Width ~ 2980 mm - Mobile, with flange of wheel - Feed speed 5 - 25 m/min - With switch cabinet - Voltage / HZ 400 / 50 - Location, on stock - Commodity code 84242000 - Voltage fluctuation max. +/- 5 %

A beader, flanging and beading machine for cans by Metal Box Company is available. Can type: 3-piece cans, can shape: round, tool diameter: 150mm, max. can height: 180mm, performance range: 70-280cans/min. An on-site inspection is possible.

AKOMAG Combi 175-18 Semi-Automatic Bottle Washer (150–500 bph) AKOMAG Combi 175-18 is a compact, semi-automatic bottle washer designed for efficient internal and external cleaning of glass beverage bottles, including wine, beer, water, and soft drinks. Ideal for small to medium production volumes, it delivers a throughput of 150–500 bottles per hour, depending on bottle size, shape, and label removal requirements. Built entirely from stainless steel, the machine features a space-saving, modular design with options for sanitization and auxiliary modules. It uses a heated NaOH water solution (up to 70 °C) with low-pressure steam to ensure thorough washing and effective label removal. Automated rinsing and washing processes are combined with manual bottle loading and unloading for operational flexibility. Engineered for low water and energy consumption, the AKOMAG Combi 175-18 o ...

3 x Conveyor belt

General SKU413X1254 MakeVirba LocationBarneveld TypeVSK 14,7-10-10/7,5-II Main Features MaterialStainless steel Motor0.9 KW Surface2.06 m2 Specified Features - Fluid bed dryer continuous Continuous fluidbed dryercheck Surface2,06 m² Bed sizes2750 x 750 mm Product inletø 150 mm Product outlet2x ø 200 mm Number of sections:1 Air inletø 250 mm Air outletø 400 mm Vibro motorcheck 2x Motor2x 0,90 kW, 400 V, 965 rpm MaterialStainless steel 1.4301 (304) Information No.33482 Year of construction1997 Mounted on mild steel framecheck Floorspace3,70x1,40 m Total height2,25 mFluid bed dryers continuousNew arrivalsVibraDryers > Fluid bed dryers continuousNew arrivalsBrand > Vibra What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the ma ...

Belt width outfeed: 400 mm, Serial number: 5083-130134-A, Dimensions: 4400 x 1450 x 1800 mm, Year of construction: 2016, Belt width: 300 mm, Description: Infeed belt elevator With crumb feading screw

IBS belt conveyors are designed for efficient, reliable, and continuous transport of concrete, stone, gravel, and other bulk materials in demanding working conditions. Thanks to their robust construction, high-quality components, and modular design, the conveyors provide a long service life, easy maintenance, and a high level of operational flexibility. The structure is made of high-quality steel, while all parts are powder-coated, ensuring high resistance to corrosion and weather conditions. Conveyors are produced in standard lengths of 5 m, 8 m, and 11 m. The standard belt width is 800 mm, while other widths and lengths are available upon special customer request. The belt speed can be fixed or optionally adjustable through a speed control system. Additionally, the conveyors can be equipped with a water supply pipeline, allowing water to be added directly at the conveyor dischar ...

General SKU361T1082 MakeFerrum LocationBarneveld CEcheck TypeDSZ-OR/T 1000/500 Main Features MaterialStainless steel Motor11 KW Inlet diameter50 mm Specified Features - Basket centrifuge Basket centrifugecheck Rubber linedhallar chamber Perforated basketcheck Capacity200 Ltr. Basket sizesDia 1000x500 mm Max. loading weight250 kg Hydraulic operatedcheck Liquid outletDia. 100 mm With hydraulic unitcheck Wandfluh HN10-6nvh, motor: 0,75 kW, 230/400 volt, 1380 rpm Motor11kW, 400/690 volt, 1475 rpm Max. basket speed1200 rpm MaterialStainless steel 1.4404, Stainless steel 1.4435 (316L) Information No.414-092 396 Year of construction2001 Mounted on foundation platecheck Floorspace1,8x2,2 m Total height1,7 m Weight2400 kg ATEX compatiblecheck Extra SpecificationsRevised machine! Including: new motor, pulleys, belts, shaft seal, and bearings. Filter area 1.57 m². C ...

1 office container system approx. 1,500 m2 approximately 55 containers of 20 ft each. Modules Variable room layout 3 floors office building approx. 38 x 20 meters Sanitary facilities, stairwell, connecting passageways, air conditioning Price: on request All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, etc. are approximate and are non-binding for the supplier. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange a ...

Deutz Zylinderköpfe im Tausch komplett mit neuen Ventilen,Sitzringen+Führungen. info@miw-zeven.de

Ladies and gentlemen, we offer: Biomass Container Heating incl. storage container with hydr. Shear floor discharge Plant complete with saemt installations Heating capacity 450 kW reachable by conversions now 480 kW Hot water production Fuel: coarse, moist spaene, wood chips up to 40% HF Best measurement results: Dust content 0.04 g/m3 at exhaust temperature of 170 degrees C For more information and pictures we are available. All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any w ...

Catta Briga Eiscreme Homogenisator, 180 l/hr, 120 Bar. Sehr Guten Zustand.

3-jaw chuck bison, new modell 3544 steels Camlock 55029 - 11 drilling 136 mms

BHKW in container with Cummins diesel engine Lorey Somer generator 250KVA 1500U / min 50 hertz Storm Steuerung, arrangement is equipped with emergency cooler zusaetzl. regularly waited to zeit 21000 company hours. arrangement is operational and available immediately. for other questions I stand to them to verfuegung under 01727265324

DOUBLE AUTOMATIC TEMPLATE SHAPER MACHINE Type BALESTRINI C70 Max. working width mm. 360 Max. working heigth mm. 120 Feed : from 1 to 8 mt./min. ( automatic or pedal variation ) n.02 Router Shaft diam. mm.30 n.02 Router Shaft motor power Hp 5,5 each one n.01 Hydraulic advance variable spped motor power Hp 1 net weight : kgs. 1000

AUTOMATIC TWIN TABLE SLOT MORTISER Type BALESTRINI 2/CAP RECONDITION MACHINE Max oscillating length mm. 120 Max. mortise depth mm. 80 Spindle collect diameter mm.13 Max. bit diameter mm. 20 Spindle motor power: Hp 3 Oscillating motor power: Hp 1 Spindle rotation: rpm 9000 Volt. 380/50

Comerio Ercole 1500mm wide x 550mm dia 4 roll inverted L calender. Peripherally drilled rolls (high pressure hot water heating), Motorised nip adjustment, Adjustable guides, Cross axis to roll 3, Unidrive gearbox with universal couplings. Motor power: Roll 1 and 4 - 50kW. Roll 2 and 3 - 60kW DC variable speed. Oil lubrication.

BITZER screw compressors CSH9891-240Y 40 d, R134a, R404a, R407A/C/F, R507, ß, good condition.

Model CAR-T5 is a reliable, totally mechanical cartoning machine for different types of products and very versatile. The robust construction of the whole system allows the production with almost all types of cardboard. The machine comes with the automatic bottle feeding system. The size change is simple and fast, adjustable with the handle and easy to maintain. The cartoning machine is built with state-of-the-art technology and is very robust. The application area of the cartoning machine is almost unlimited. This model is used worldwide in the pharmaceutical, cosmetic, chemical and food sectors. Technical data: Production: 120 cartons/min handling: intermitent carton measurements (A x B x H): Min. 20 x 16 (12) x 60 mm max. 95 (105) x 70 (80) x 200 (205) mm Electrical consumption: 4 kW Power: 9.5 kVA Compressed air: 9.5 m³/h 6 bar.

1 x BUZULUK 1920mm wide Four-roll 'L' calender - Type: 03506 - Rolls dia 710x1920 mm - Year of manufacture: 1989 - Peripherally drilled rolls - High pressure hot water heating (Steam 1.6 and 3.2 MPa) - Motorised nip adjustment to rolls 1, 2 and 4 (30mm adjustment) - Cross axis on roll 3 (0-30mm) - Roller Bearings - Unidrive gearbox with DC motor to each roll - Rolls 1 and 4: 46 kW - Rolls 2 and 3: 77 kW - Working speed of 4th roll max 60m/min In very good condition.

From small through medium to big concrete batching plants, Prometal presents the most efficient ways of production of concrete with great results of high-quality concrete. Our customers can choose between 15 cubic meters per hour to 120 cubic meters per hour concrete batching plants. Long-lasting structures and stable design provides our customers with long term profitable investment with no regrets. The aggregate bunker is designed and manufactured to operate under heavy working conditions for a long time. There are 2 electro-pneumatically controlled discharge gates, which provide easiness and choice in the discharge together with suitable elevation. Aggregates are weighed by 4 units of load cells. Electric installation of concrete batching plant includes all electrical connections of voltage, controlling and part for measuring of the plant. All installations and sa ...

Rotary Lathe with Staylog Bar and Longitudinal Cutting System

Output: 60 cups/Min. Filling system: volumetric 100-250 g.Optional up to 1000g. Cup size: rectangular 110 mm of diagonally, or 110 mm diameter. Closure: snap on lid or seal sheet. Product: Margarine, lard, salad, etc. Used machine, complete overhauled.

Compressor Bitzer CSH8571-140Y-40P

The Bio Mark 7 is the largest commercial cold press juicer we manufacture. It features a quick release hopper using two toggle latches, meaning the hopper chute can be removed in seconds and requires no gasket like other manufacturers. It has a Slim top body that still raises up to allow faster bag cleaning and a press only option. It also is our only juicer with a speed control option on the grinder allowing you to control the speed of the grinder. The Mark 7 is for serious cold press juice production and can easily upscale your juice production with simple controls and exceptional performance. apacity: 12 Kg per batch Output: 70 - 100 Litres per hour ( depending on recipe ) Power: Single Phase 240 Vac 50/60 Hz 3.75Kw 22.9 Amp IP66 Max Press Pressure: 3000 PSI Operating Press Pressure: 2200 PSI Motor Power: 5HP Hydraulic Rams: Two Weight: 400 Kg Dimensions: L: ...

Chiller Green Box Multi 156A 2006 year probably damaged evaporator // controller - o.k. // three compressors - o.k. // one compressor probably dameged Weight - 4000 kg

Chiller Green Box Twin 61 2006 year Price 4.500 Euro probably damaged evaporator // controller - o.k. // two compressor - o.k.

2x CHILLER with 660kW; each with 2x BITZER screw compressors; very few operating hours; in 2 containers with 2x recooler on the containers Technical data: Manufacturer: GWK Germany Type: SKW 2 -600 X 2x Bitzer Type: CSW 8593-125Y-40P Containers are heated Operating hours: approx. 5000h Year: 2010/2011, water tank approx. 8 m³ for cold water with 5 pumps 2 x GEA plate heat exchangers for freecooling 2 x 40ft Container High Cube B 3 m connected to each other 2 x GÜNTHNER Glycol Table Cooler W 2.4 m; 500 l capacity; on the container with 12 EC fans each (speed controlled) Refrigerant R134a; 34 kg per circle; Filled complete documentation very good condition more data: see pictures More pictures on request Price on request under infofrigocom.at

Kragarmregal, one-sided, 6.30m height, 1.20m arms, 900kg per arm - new product - : Price from location incl. loading! 1 shelf unit with 4 stands 2.995.-€ (net)! Transport costs within D (without islands): 340.-€ (net)! A Kragarm shelving system, hot-dip galvanized, consisting of: Shelf stand on one side approx. 6,300 mm high, hot-dip galvanized Foot and arm depth 1200 mm with 3 height-adjustable shelf arms each Load capacity at load centre 600 mm 900 kg per arm / 4,000 kg per stand at 4 stands per arm level 4 x 900kg = 3,600 kg Profiles: Frame: IPE220, Arms: IPE 100 with longitudinal and diagonal bandages e = 1300 mm, standard is 1.30m – so if they do not give any different information, we deliver the shelf with an axle distance of 1.30m. Other axle distances possible e.g. 1m, 1.25m for a small surcharge also 1.50m or special dimensions! As a standard deli ...

Kragarmregal, one-sided, 6.30m height, 1.20m arms, 500kg per arm - new product - : Price from location incl. loading! 1 shelf unit with 4 stands 2,795.-€ (net)! Transport costs within D (without islands): 340.-€ (net)! A Kragarm shelving system, hot-dip galvanized, consisting of: Shelf stand on one side approx. 6,300 mm high, hot-dip galvanized Foot and arm depth 1200 mm with 3 height-adjustable shelf arms each Load capacity at load centre 600 mm 500 kg per arm / 4,000 kg per stand at 4 stands per arm level 4 x 500kg = 2,000 kg Profiles: Frame: IPE220, Arms: IPE 80 with longitudinal and diagonal bandages e = 1300 mm, standard is 1.30m – so if they do not give any different information, we deliver the shelf with an axle distance of 1.30m. Other axle distances possible e.g. 1m, 1.25m for a small surcharge also 1.50m or special dimensions! As a standard deliv ...

Continuous tunnel

Тypе: FESSMANN BK 2 522 1W Baking chamber with rotating trolley of 360° Heating: electrical Control: DP 11 Width of the basic area: 198 cm Depth of the basic area: 187 cm Corpus height: 251 cm Total height: 298 сm Min. room height: 340 сm Baking trolley dimensions (HxBxT), сm: 198х102х104 Installed power, electrical heating: 88,2 kW Baking temperature: about 230 ° C

approx. 23 pieces OTTO dangerous goods container, 600L, large container "IBC" – used -: Price per piece from location: 395.- € (net)! Manufacturer: Otto Containersysteme GmbH Type: 11A/X/01/99/D/OTTO/BAM 0356/2556/1090 Manufacturer Part Number: 33782 Year of Make: 1999 Capacity: 600L Tank material: St. W 24 Maximum permissible gross weight: 1.090kg Net weight: 190kg with approval as a large container "IBC" for the national (GGVS/GGVE/GGVS and international (ADR/RID/IMDG code) transport of dangerous goods of packaging groups I, II + III (X-coding) Dimensions according to DIN 30741 Tank made of steel, hot-dip galvanized with hinged, lockable lid Lid locks in place by special spring technology up to approx. 70° at any opening angle Container all around with only 2 closures on the front with forklift pockets, safety hook for PE bags, nameplate and bag Conditio ...

Graseby Best Checkweigher Stainless frame, overall length 1600mm, weigh platform 440mm x 300mm, weighs from 100g - 500g, pneumatic blow reject into reject bin, 3Ph

Bosch Car T5 horizontal cartoning machine for vials/bottles, blisters, etc. inmtermittend motion, infeed for blisters, etc. via Transborm System curved conveyor and infeed belt (180 mm x 700 mm (belt width x length)) feeding into an automatic product inserter to put the products into the bucket infeed of the machine, infeed for vials/bottles via Bosch URK 1200 rotary turntable (diameter 1200 mm, suitable for vials/bottles with a diameter of 18-85 mm and a height of 20 to 175 mm) with feeding table (490 x 580 mm (WxL)) and bottle insertion device into the bucket infeed of the machine, carton size range min. 20 x 16 x 60 mm (AxBxH), max. 95 x 70 x 200 mm (AxBxH), reverse tuck closure of the carton flaps, GUK FA21/4 leaflet folder from stack (4 folding pockets, format min. 60 x 80 mm, max. 210 x 300 mm, smallest fold 15 mm), single-sided emboss coder (3 lines), Laetus Argus 6012 bar code re ...

Used cartoner Höfliger + Karg (Bosch) CARTONETTA. New 1975. Dimensions: lenght 2850 mm + ca. 3000 mm conveyor width 1100 mm height 1600 mm weight 450 kg. Voltage: 380V with a power socket Machine speed: up to 50 cartons per minute Folding the leaflet: 3 or 4 fold the sheet. Dimensions for folding leaflets: 3 - fold: from 90 x 90mm to 210 x 210mm 4 - fold: from 90 x 90mm to 297 x 210mm Carton length: 50 - 180mm Carton width: 15 - 80mm Carton height: 16 - 60mm

Cucinesse Evolve Kitchen Showroom exhibition piece unused Evolve Made in Italy The Evolve collection is present in the "Light On Design" catalogue, a curated project that celebrates the perfect combination of artisanal precision and industrial know-how. With its sophisticated design and meticulous attention to detail, the Evolve model creates a welcoming and tactile space where materials take centre stage. Manufacturer: Cucinesse Italy Model: Evolve Sand-beige Type: Cooking Island Countertop: Trespa marble effect Nero Street Worktop height: 94.5cm Length of the cooking island: 362.5cm Width of the cooking island: 103.5cm Height of the cooking island: 94.5cm Washbasin: Reginox base 50x40 cm Dishwasher: Beko BDIT38531DC 60 cm Refrigerator: Miele K7733E, 178cm, 320 liters Softclose Hob: Bora Puxu induction hob with extractor, 83x50 cm Faucet: Without Stove: Wit ...

Fogg & Young Bale Cutter

Engine Brand: PERKINS, Condition: USED, Working Hours: 7700 Hour(s), Engine Condition: Used , Starter Voltage: 12 Volt , , https://www.hamofa.com/stock/compressors/ingersoll-rand-p70wn-compress or-7-bar-used/42278, , = More information =, , Type number: P70WN COMPRESSOR 7 BAR

Touch Panel, Control panel, CP7822-0001-0010, Beckhoff, new Please note: This is an original product and not a replica from... Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. New! - never been used and is completely new, - comes from a spare parts warehouse of a certified production facility, - is in its original packaging, 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for direct and indirect consequential damages. Our terms and conditions apply, see our website. Austrian law applies without exception and court location St. Pölten.