b und c used for sale

General SKU222X105 MakeFerrari LocationBarneveld CEcheck Main Features MaterialStainless steel Motor7.5 KW Length780 mm Specified Features - Stirrer Dissolver stirrercheck Shaft length780 mm Without stirring headcheck Motor7,5 kW, 230/400 volt, 1420 rpm Wall mixercheck Adjustable height0,37 kW, 230/400 volt, 1370 rpm, 7,9 rpm MaterialStainless steel Information No.C2010-024.2 Year of construction2010 With switchgearcheck Floorspace1,00x1,20 m Total height3,25 m Weight2000 kg Extra SpecificationsWith 1x mobile drum, dia. 1000x750 mm, output dia. 50 mm, volume 500 ltr., control cabinet StirrersFerrari BelgiumMixers > StirrersBrand > Ferrari Belgium What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Neth ...

Manufacturer: Bürkle, Type: CASC 1400, Year: 2005, Control: Bürkle Siemens, Working width min-max mm: rechts, Arbeitslänge min- max mm: 950, Arbeitshöhe min- max mm: yes, Operating side: 240 mm , Working height: 5 By 1, Lackauftragseinheiten: yes, Spachteleinheiten: 198, Vorschub Transport m/min min - max: yes, kW - Leistung Transport: 5-15, Auftragswalzengeschwindigkeit m/min min-max: yes, Auftragseinheit 1 : 1516, Gummierung mm: 1516, Dosierwalze 1 m/min min-max: 1516, Auftragseinheit 2 shore härte: yes, Gummierung mm: yes, Auftragseinheit gelasert: ca.300, Rillen/cm: 3-80, kW - Leistung Auftragswalze: 10-1300, Stärke Gummierung min-max mm: ca.8-25, Stärke Gummierung mm: yes, Reverse und Gegenlauf: Band, kW - Leistung Dosierwalze: 2700, Glättewalze Reversantrieb: inkl. Schwerspachtelpumpe für 200 Liter Fässer, Year :2005

Manufacturer: Biesse, Type: Rover 6.50 5-Achsmaschine conf.2, Year: 2006, Software: Editor 2.2.1.273, Working range X: 4600, Working range Y-axis: 1535, Working range Z: 230, C axis: yes, B-axis: yes, Programming station office: möglich, Number of milling spindles: 1, Milling engine 1 hours power: 12, rpm 1): 1500-2400, Kettenwechsler: yes, Number of tools per tool-magazine: 14, Mitfahrender Werkzeugwechsler: yes, Traverse table: yes, 4 station allocation: yes, Stops in the table front: yes, Stops in the table rear: yes, Vacuum pumps m³/h: 120, Rigging support table: yes, Tool clamping system: HSK-63 F, Saw unit: yes, Radial arm machine: yes, Werkstückspannsystem: Vakuum, Schnittstelle DXF: yes, machine ready for demonstration: yes, Zentralschnierung: yes, Presentation possible: yes, Year :2006

Gear motor, electric motor -Speed: 626 rpm -Power: 2.2 kW -Construction: B5 -Diameter shaft: 20 mm -Protection class: IP 54 -Number: 1x motors available -Price: per piece -Dimensions: 460/250/H210 mm -Weight: 31 kg

Manufacturer: Priess und Horstmann, Type: BAT III-CNC-2, Year: 1996, Control: Priess und Horstmann, Program: yes, Function: Frontenbohrmaschine, Work piece width min-max mm: 100-600, Min.-max. workpiece length in mm: 100-1000, Min.-max. workpiece height in mm: 16-25, Destacking unit: 2, Einlaufrollengang: 2, Dowel driving station: 80, Milling spindles horizontal: Blum, Milling spindles vertical: yes, Fitting type: 21000, Schliesszylinder Bohrstationen: 2600, Schlosskastenfrässtationen: 60, Bänderbohrstationen: 2, Bänder Eindrehstation: 15, Hinges inserting unit: no, Dowel driving station: 3, Working range X: 2, Dowel driving station: 3, Working range Z: 1, Dowel driving station: 3, Drilling support horizontal: yes, Drill gearings: yes, Number of tables: yes, Year :1996

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 33700 € : 643.67 € : Doppelsäulenführung : 6300 x 41 x 1,3 mm : 15 - 120 m/min : 440 mm : 440 mm : 640 x 440 mm : rund 440 mm, rechteck 400 : rund 250 mm, rechteck 250 : rund 390 mm, rechteck 390 : 860 mm : 1.1 kW : 4 kW : 0.12 kW : 3150 mm : 1850 mm : 2115 mm : 2050 kg 3° inclined sawing band blade brush control panel hydraulic vice hydromechanical blade tension inverter linear way height adjustment pressure adjustment coolant pump saw blade security switch gearbox syncronized movement of sawing arm/clamping jaw hydraulic uplift of sawing frame user manual in GERMAN or ENGLISH ALTERNATIV: Version BMSY 440 CDGH NC with automatic mitre adjustment by NC control The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

GeneralCTX beta 1250 4A Two spindle turning centre with - partial hollow clamping device for main spindle and counter spindle internal diameter of draw tube Ø67 mm (2.63 in) x 700 mm (27.55 in) deep - 2 C-axes and spindle brakes (hydr.) - 2 12 fold Sauter star turrets reception VDI 40, DIN 69880-40 with precision interface (Trifix) and tool drive connection/drive acc. DIN 5480 - Y-axis, slide I - counter spindle slide; Control: CELOS X with Siemens 840D SL Operate Headstock, leftClamping chuck Ø315 mmSpindle nose diameter170h5 mmSpindle diametre on front bearing130 mmSpindle bore87 mmDrive power (100% DC)25 kWTorque (100% DC)280 NmSpeed range0-5000 rpmC-Axis Speed2000 rpmHeadstock, rightClamping chuck Ø315 mmSpindle nose diameter170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmDrive power (100% DC)25 kWC-Axis Speed2000 rpmTorque (100% DC)280 NmSlide 1Longitudina ...

BASSINA

Attuatore proporzionale con valvola da 2" + pressostato

Titanium angular rotor BECKMAN COULTER 70.1 Ti Fixed angle rotor Max: 70,000 rpm, 450,000 x g Capacity: 12 x 13.5 mL Nominal capacity: 162 mL K Factor: 36 Angle: 24º Maximum tube length: 76 mm Maximum tube diameter: 16 mm For use with H, R, S centrifuges

- Cambia filtro automatico Nordson EH-35 - Materiale lavorato: PP / PE

Camera di plastificazione Negri Bossi con: vite , PVR e resitenze per gruppo iniezione Negri Bossi Euromap 1450 diametro vite 70 mm con protezione superiore cilindro

BASSINA

cutting diameter: 440 mm saw band length: 5200 x 1,1 x 34 mm cutting width: 610 x 440 mm cutting speed: m/min total power requirement: 3,7 kW weight of the machine ca.: 0,8 t dimensions of the machine ca.: 2,7 x 1,55 x 1,5 m Band saw horizontal - Coolant system - Emergency stop switch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

AUTOMOBILE ALLESTIMENTO AVANTGARDE POTENZA 95 CV CHILOMETRAGGIO CIRCA 160.000KM

Sistema di riempimento e stoccaggio contenitori Dimensioni indicative contenitori mm: 800 x 400 x h 520

Aluminum angular rotor BECKMAN COULTER JA-25.50 Fixed angle rotor Max: 25,000 rpm, 75,600 x g Capacity: 8 x 50 mL Nominal capacity: 3,000 mL Biosecurity Lid For use with Avanti J Series and J2 Series Centrifuges (except J-21 Series)

- Cambia filtro automatico Nordson EH-35 - Materiale lavorato: PP / PE

This 8-axis Citizen BNE-51MSY was manufactured in 2018. It features a maximum bar diameter of Ø 51 mm and a spindle speed of 5,000 min-1. The machine includes 12 turret stations and a slide stroke of 195 mm in the X1 direction. If you are looking to get high-quality turning capabilities, consider the Citizen BNE-51MSY horizontal turning machine we have for sale. Contact us for further details.

Process chiller / chiller air-cooled, Type: CYGNUS TECH CYT 081-BIO – 19.8 kW Manufacturer: MTA S.p.A. CYGNUS TECH CYT 081-BIO are compact water cooling units designed for outdoor installation down to -20°C suction temperature. Including crank tub heating, buffer tank and built-in P1 circulation pump --Optimized for biogas cooling-- Cooling capacity kW 19.8 Cold water temp. Exit/Entry: 7 / 12°C Volume flow m³/h 3.43 Head available bar: 2.03 Ambient temperature °C 32 Refrigerant R 410A Electrical data: Voltage V 400, Frequency Hz 50, Phase Ph 3 Max. power consumption (kW) 10 Max. Current (A) 19 Starting Current Circuit (A) 102 Protection class: IPX4 Dimensions: Length mm 1960, width mm 810, height mm 1203 Weight kg 457 Connection R 1"1/4 Serial No.: 2200430168 Year of construction 2025 Condition: Optical 1, Technically ok (Bearing Machine)  ...

General SKU228Y124 LocationBarneveld CEcheck Pressure Working pressure4 Bar Vacuum possiblecheck Working pressure jacket4 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume200 Ltr. Motor5.5 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity275 l. (200 l.) Vessel sizesDia. 900x700 mm Dished bottomcheck Top connectionscheck OutletDN35 With jacketcheck volume 11,75 l. Max. temperature-10/150 With anchor stirrercheck Motor1,5 kW (400 V 1461 rpm) Speed mixing shaft41 rpm With homogenisercheck Motor4,0 kW, (380 V, 2905 rpm) Stainless Steel Reactors MaterialStainless steel 1.4404 (316L) Information MakeNiro Croatia SerialNIC-17-04 TypeCV-201-NR-200 Year of construction2017 Mounted on legscheck With switchgearcheck Floor space1,10x1,10 m Total height1,60 m Weight620 kg Extra SpecificationsWith ball cleaning, con ...

GeneralCNC Turning Centre with C axis and tool drive; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways700 mmTurning diameter410 mmTransverse stroke300 mmLongitudinal stroke850 mmMax. Turning Length800 mmClamping chuck diameter max.315 mmBar diameter max.65 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)25 kWSpeed range25 - 5000 rpmTorque (100% DC)280 NmC-Axis Speed-200 rpmTorque of C-Axis (holding torque)225 NmAccuracy at point stopping0,01 degreeTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.-4000 rpmPower max. (40% DC)11,3 kWFloor space/WeightWeight approx.6500 KgDimensions (L x W x H)3,99 x 2,69 x 1,99 mTechnologie cycle alternating speedTechnology cycle for the  ...

GeneralCNC Turning Centre with C axis and tool drive; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways700 mmTurning diameter410 mmTransverse stroke300 mmLongitudinal stroke850 mmMax. Turning Length800 mmClamping chuck diameter max.315 mmBar diameter max.65 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)25 kWSpeed range25 - 5000 rpmTorque (100% DC)280 NmAccuracy at point stopping0,01 degreeTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.-4000 rpmPower max. (40% DC)11,3 kWFloor space/WeightDimensions (L x W x H)3,99 x 2,69 x 1,99 mWeight approx.6500 KgPlug-in board with 2x4 free in-/outputsInputs / outputs programmable via M-functions, consisting of: 8 inputs 4 outputs ...

dimensions of the machine ca.:3,5 x 2,0 x 2,5 m

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 61900 € : 1169.91 € : Doppelsäulenführung : 6000x41x1,3 mm : 20-100 m/min : 540 mm : 540 mm : 670x540 mm : rund 540 mm, quadrat 540 : rund 510 mm, quadrat 510 : rund 270 mm, quadrat 250 : 805 mm : 2.2 kW : 4 kW : 0.12 kW : 3100 mm : 2350 mm : 2150 mm : 3800 kg NC control double column band saw on linear guidelines 3° cutting angle blade brush control panel hydraulic feeding vice hydraulic vice hydromechanical blade tensioning inverter optical height adjustment proximity switch for sensing blade slippage material limit shaft pressure adjustment coolant pump saw blade security switch user manual in GERMAN or ENGLISH OPTIONS: hydraulic top clamping micro coolant equipment laser cutting line ALTERNATIVE: model BMSO 540 CGS NC (with servo instead of hyraulic feed) € 70.200,-- The data for this ad was created with ModulMWS - the softw ...

Description Konica bizhub PRO C1060 Used device Machine number: 1819287410 Meter reading as of 02.11.2022: 00942571 from 12-2015 Controller option VI-507 Interface Kit for EFI Fiery IC-308 / IC-415 Print processing IC-415 EFI Fiery integrated print controller bizhub GPRS modem incl. SIM (KPN) Interface to remote maintenance system via mobile radio, modem incl. SIM card f DF-626 Automatic original feeder Paper input PF-707 Large capacity magazine with suction system technology Finishing FS-532 All-In-One-Finisher RU-509 Cooling/smoothing unit Konica bizhub Pro C1060-tech data

Description Pitney Bowes franking machine Connect 3000 MPR1 from 2023 Technical data Cycle rate up to 18,000 letters/hour Cycle speed with simultaneous dynamic weighing up to 12,000 letters/hour Technology Inkjet Included additional functions Scale with automatic weight. Data transfer yes, up to 5 kg FRANKIT® Functions TouchIT – Direct product code entry yes 2D matrix code yes 1D barcode for additional letter services yes Second EKP number yes Order number for special conditions yes Envelope formats C6 yes DIN long yes C5 yes C4 yes B6 yes B5 yes B4 yes Max. clearance height (mm) 19 Functions Portofon for

This SCHÜBEL MT 630 CNC was manufactured in 1999. It is a horizontal turning machine featuring a point width of 2,000 mm, a circulation diameter of 630 mm over the bed, and 290 mm over the cross slide. The speed range is 8 - 3,000 rpm with a drive power of 28 kW. Contact us for more information about this machine.

; Power [PS]: 345; Gross weight [kg]: 800; Engine: CATERPILLAR 3306

; Gross weight [kg]: 650; Engine: CATERPILLAR 3176; Emission class: Euro 0

MAN D2066 cylinder block 51.01100-6361 / 51.01100-6371 for 2850 Euro / each., The block is used in good condition, delivered with 3 months warranty.

; Power [PS]: 185; Gross weight [kg]: 650; Engine: CATERPILLAR 3116 DIT