129,816 used machines on RESALE, but how to find them? Machine Search
Bosch stainless steel dosing pumps, 12 mm (21 pcs. available)
Bosch stainless steel rotary piston pumps Ø 30 mm, long version (8 available)
Bosch stainless steel rotary piston pumps, , Ø 30 mm, short version (12 available)
Material: PVC // Details: DC motor 10 kW, screw diameter 52 mm, L/D 16, degassing, capacity: approx. 10 - 70 KG/hr.
Bühler Entoleter MJZG 51 D, Fabrication-Nr. 10256498 Includes Frame für standing mount Sockets and wear rings in good condition rinse with compressed air no magnet valve
Material: PE, PP, PS // DC motor: 132 kW, power: approx. 300 - 500 KG/hr, screw 90mm, L/D30, strand nozzle, water bath, strand granulator.
- The largest diameter of the workpiece, mm 90 - The maximum diameter of the planted flange, mm 120 - Rated force of the landing slide, kN 6300 - The force perceived by the clamping slide with closed dies, kN 6300 - stroke of the landing slider, mm 350 - The stroke of the landing slide after closing the dies, mm 230 - The frequency of continuous idle slider per minute, not less than 42 - Power of the electric motor 45 - Dimensions, mm length 4835 width 3450 height 2880
Material: PVC // with degassing, counter-rotor, DC motor 29 kW, screw diameter 86 mm, L/D 16 Capacity: 150 - 250 KG/hr
Cast Film CoEx System (ABA), PE / PP, Capacity: approx. 400 - 700 kg/h, Main extruder, 120 mm, co-extruder of 60 mm, screen changer, melt pump, Co-Ex block, nozzle 1,650 mm, 2-roll chill-roll smoothing unit, cooling section, extractor, double winder with cutting device and edge control, edge trim, film measuring device thickness NDC (without measuring head), incl. operating instructions and e-plans.
Modular built semi-automatic twist wrapping machine Product dimensions: Width: 50 - 730 mm Height: 20 - 520 mm Length: 750 mm to infinity Maximum diagonal: 730 mm Packing materials: PE stretch film, VCI stretch film PE film, crepe paper, etc. Width: up to 250 mm Core average: 76 mm Very good condition!
Key data: 500
Flat disc Bison 500 mm direct opname 55027-6 1 klauw heeft een lichte kras, verder als nieuw !
CATALOG NUMBER M0252 PRODUCT FEATURES The main features of the machine: - Single-head drilling machine for drilling in the range of 0 - 90 ° - Pivoting angle of the head adjusted pneumatically - Possibility to set lateral supports with an accuracy of 0.1 mm - Safety holders allow quick adjustment of panels without adjustment - Spindles adapted for quick couplers - Patented pneumatic clamps of the material - MDF work table - Quick and accurate adjustment - Precise drilling - Italian production Standard equipment of the machine: - 2 aluminum rulers with a length of 1.5 m (right and left) with four stopwatches - 5 quick connectors - Wooden box securing the machine in transport. ADVANTAGES - vertical / horizontal / angled drilling - multi-spindle - new machine - CE certificate - solid - professional TECHNICAL DATA - number of spindles 23 - dista ...
Spiral kneader Boku SK 240 A Basic overhaul basic refurbished spiral kneader Boku type SP 240 A with digital Steuerung.Es are 2 boilers in stainless steel with trolley. The kneader is suitable for a maximum of 240 kg of dough or for a maximum of 150 kg of flour.The machine has 2 speeds (slow and fast) and 2 Mixing time zones. Optionally, you can get the machine with a tipper and up to 4 boilers. Type: SK 240 AS CS for maximum 240kg of dough or for max. 150 kg flour 2 automatic timers 2 courses slow and fast Stainless steel spiral with 2 stainless steel boilers optional lye with up to 4 boilers Machine is overhauled and repainted
NEGRI BOSSI - SACMI 1300 Ton HIGH TONNAGE 2014 Model BI-POWER VH1300 /12100 120mm Screw Calculated Injection Volume 7351 cm3 Shot Weight 6689 Grams Space between HxV Tie Bars 1400 x 1200 ASK FOR VIDEOS
We offer for fast CHP Scania DC12-16 motors/hull motors in exchange. MIW Motoren-Instandetzunsg-Werk GmbH North-West Ring 8 D-27404 Zeven/Germany E-mail= info at miw-zeven
We are stocked for CHP Fast with Scania Motor DC12/16 fuselage motors. MIW Engine Repair Plant GmbH North-West Ring 8 D-27404 Zeven/Germany e-mail: info at miw-zeven
- very well used and refurbished rotary vane vacuum pump - oil-sealed two-stage fine vacuum pump - Suction speed: approx. 18 m3/h, final pressure: 5x10E-3 mbar
Used vacuum pump, roller piston pump for the fine vacuum range, suction capacity: 250m3/h Roller piston pump for the fine vacuum range, suction capacity: 250m3/h; Final pressure: depending on the performance of the pre-vacuum pump
used
Complete Particleboard Plant Don't hesitate to keep in touch with us for further information.
NEW! industrial shredder for pulled meat suitable for beef, pork, lamb, chicken,… content hopper : ± 35L electrical power : 1,47 kW capacity : ± 300-500 kg / h (depending on the degree of the cooking) possibility to place a 200 L eurobin at the bottom of the machine, so the product falls in it.
used
Qty. 1 Second-hand batch-type annealing furnace Mfc.: LOI SAAR Type: natural gas (Hu=3.6 MJ/Nm³) Charging material: square, round dia. 50 up to 200 mm Length: 6.2 m Max. heat treatment temperature: 950 °C Capacity: max. 60 T at normalising 35 T Application: Tempering, stress relieve, normalising Heat gradients: 60 °C/h average (adjustable) Heating zones: 4 Number of burners: 20 Control principle: on/off with digital programmer Temperature precision: 10°C tolerance at 550 °C
Bosche Volume Scale 3D Silence Volume and weight recording for master data entry and master data maintenance in the warehouse Exact volume and weight recording for warehouse management and order picking. Non-contact measurement with laser sensors Weighing range up to 150 kg Easy integration into IT systems Ideal for precise freight calculation and master data entry ✔ Professional weighing technology ✔ Original BOSCHE quality Fast - Accurate - Reliable Modern warehouse management and picking require exact article master data. Quality improvement in the process includes the exact determination of dimensions (belt dimensions) and weight for exact freight accounting and the actual transport or storage space required. The BOSCHE Volume Scale 3D is the ideal tool for contactless volume and weight detection of packages. The semi-automatic measurement (length x width x ...
Our BUSCH R5 0305 rotary vane vacuum pump is after the general overhaul: absolutely new checked according to manufacturer specifications, so all games and dimensions are in the tolerances equipped with new wear parts available at short notice includes one year warranty Our BUSCH R5 0305 Rotary Vane Pump wants: be as good as new be checked after the manufacturer's specifications, for example its tolerances be fitted with new wear parts be available at short notice included one-year warranty
Our BUSCH R5 0165 rotary vane vacuum pump is after the general overhaul: absolutely new checked according to manufacturer specifications, so all games and dimensions are in the tolerances equipped with new wear parts available at short notice includes one year warranty Our BUSCH R5 0165 Rotary Vane Pump wants: be as good as new be checked after the manufacturer's specifications, for example its tolerances be fitted with new wear parts be available at short notice included one-year warranty
The BTS-MF550 is the ideal waste baler for compacting your loose cardboard and plastic film waste into a bale of up to 550 kg. The baling press impresses with its ease of use, safe operation and its spacious filling chamber, it is ideal for medium to large amounts of material. By baling these valuable and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Pressing force: 50 Ton Bale weight: up to 550 kg (material depending) Bale size: 1200 H (var.) x 1500 W x 800 D mm Machine size: 3217 H x 2115 W x 1200 D mm Machine weight: 1650 kg Transport height: 2500 mm Loading aperture: 1500 W x 770 H mm Cycle times: 40 seconds Motor: 5.5 kW 16 Amp Power supply: 380 - 400 V (3 phase) Noise level: 68 dB Dual cylinders for even compaction of the m ...
The BTS-MF650 is the ideal waste baler for compacting your loose cardboard and plastic film waste into a bale of up to 650 kg. The baling press impresses with its ease of use, safe operation and its spacious filling chamber, it is ideal for medium to large amounts of material. By baling these valuable and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Pressing force: 50 Ton Bale weight: up to 650 kg (material depending) Bale size: 1100 H (var.) x 1500 W x 1100 D mm Machine size: 3217 H x 2100 W x 1524 D mm Machine weight: 1930 kg Transport height: 2500 mm Loading aperture: 1500 W x 770 H mm Cycle times: 40 seconds Motor: 5.5 kW 16 Amp Power supply: 380 - 400 V (3 phase) Noise level: 68 dB Dual cylinders for even compaction of the ...
Condition: well-maintained, in working order Availability: immediately Rated power: 1 kVA Rated current: 3 A Short-circuit current: 6 kVA Weight 250 kg Product stackers for hand packing stations and semi-automatic packaging processes The SERVOFEED PF200 product stacker is a compact, stand-alone stacking aid and supports production personnel in manual semi-automatic packaging tasks or in the pre-packaging of products. The products are taken over in 1 lane, product stacks of the same or different height, e.g. stack height 6-8-6-8 packs, are formed and can be further processed by hand. Application The classic area of application of the SERVOFEED PF200 is line separation, e.g. after a thermoforming machine, on control devices, e.g. scales or metal detectors. The resulting product stacks can then be manually inserted into E2 crates or cardboard boxes. The stand-alone pac ...
Motor for trimmer BETTCHER type UN-84 Power: 440 Watt Power supply: 230 V without handle and circular blade We also offer: Blade - Knife 1000 - 183141 Blade - Knife 1400 - 183142 Blade - Knife 500 - 183142 Guide rail 1000 / 1400 - 183143 Toothed bushing 183154 Request a quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biala VAT id: PL547-17-47-669 tel. 0048/33 812 58 60 Fax. 0048/33 812 58 36
Hydraulic mobile tin hole punch for e.g. control cabinet construction and control construction Manufacturer Alfra Type SKP-1 Punches holes of max 140mm diameter in 3mm sheet metal Round, square and rectangular stamps possible. Punch punch punch tin punch drill tin hole drill monocut gap-plate-hole, hand hydraulics, ball bearing screw, Klauke Alfra Special price
Nut bumper head for attachment to a machine with SK40 tool holder. The tool is suitable for pushing grooves. Manufacturer: ETS Perez 69 VILL.NNE BREVET19015 TYPE127745 How spiral groove works Accessories various groove shock steels M.3, M.4, M.6, M8 T.45, M8 T80, M10 T.80, M10 T80, M12 T.80, M.16 T.82 Special price
Various above-ground, double-walled tanks in sizes 5,000 / 7,000 / 10,000 / 20,000 litres Diameter 1,6000 and 2,000 mm
: 1050 mm : 480 mm : 550 mm : 1524x380 mm : SK 40 : 127 mm : 105 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Syspal Tote bin lifter Stainless tote bin lifter, lifts to 1.5m, battery powered, 3Ph
Gross volume approx. 18 litres, net volume approx. 12 litres Mixer shaft heatable and coolable Double jacket heatable and coolable Product-contacted parts: stainless steel VA Drive is carried out by chain drive and gearmotor Subject to prior sale - Errors possible
Key data: 588 KW
TO WHOM IT MAY CONCERN ; WE VE 1 PC USED GENSET BAUDOUIN 12M26.2 -A225 GENSET AND 2 SETS USED BAUDOUIN 8M26.2 - A225 GENSETS AT OUR STOCK PLS FIND ENGINE DETAILS ON BELOW. TYPE : 12M 26.2 - A225 YOB. : 2014 ENGINE NO : 12M2342 POWER. : 588KW / 1800 RPM TYPE : 8M 26.2 - A225 YOB. : 2015 ENGINE NO : 8M262 0023 POWER. : 415KW / 1800 RPM TYPE : 8M 26.2 - A225 YOB. : 2017 ENGINE NO : POWER. : 415KW / 1800 RPM WE VE ALSO SOME NEW UNUSED GENUINE PARTS . IF YOU VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US
Storage shelf, supply rack Manufacturer: BITO Outer dimensions: width x depth x height (approx. 200 x 140 x 200 cm) 5 shelves with roller strips 4 roller wheels Lower floor is straight, and 4 upper floors with slant and shaft plates is disassembled and ready for collection
Used shredder for the pre-shredding of old cables and other materials. Cutting unit with knife blocks instead of cutting crowns. Two stator knives arranged opposite each other for higher hourly output. Easy-to-reach maintenance areas. Drive with 2 electric motors with 7.5 kW, 400 V each and a reduction gear arranged directly on the rotor axis. Hydraulic slide valve with load control. Rotor reverses in case of overload. A gearbox replaced. Perforated sieve 25 mm. Additional set of rotor blades. Output approx. 200 kg of cable per hour. The machine can be viewed and tested with us. Write to us. infRecyclinganlagen.info.
Mixing vessel Company: Bäuchle & Sohn N°: 2193/1/2 Built: 1987 Double jacket pressure: 3 bar (insulated) Indoor and outdoor temperature: 150°C Content: max. 400 l min. 50 l Wiper agitator, speed-controlled Jet-flow agitator with 2 stages Temp meter, switchgear Dimensions LWH: 1100 x 970 x 2220 mm Weight: approx. 600 kg
Stroke power: 180 KN (18 tons). Adjustable speed: 100 - 600 strokes per minute. Adjustable stroke: 4 - 36 mm. In very good working condition. Feeder: BBV 60/60 Max. Strip Width: 60 mm. Max. Feeding Length: 60 mm. Max. Thickness: 2 mm. With stroke and speed counter. Programmable speed, number of strokes etc. Three working modes: manual, one stroke and automatic. Heavy Duty, for non stop production. Pneumatic clutch and brake. Machine with warranty 6 months. Machine dimensions: 600 mm x 600 mm x 1850 mm. Machine weight: approx 1.2 tons. Power consumption: 2.2 KW. Technical Air: 8 bar.
• max workpiece thickness: 55 mm • min. workpiece width: 80 mm • max profile depth: 80 mm • max edge thickness: 3 mm • Table size: 800 x 380 mm • Foot pedal operation • Adjustment via mechanical counters • Weight approx. 120 kg (Changes and errors in the technical data and prices reserved!)
Vacuum reactor model BACHMIX with a total capacity of 340 liters, manufactured by BACHILLER. Mounted on a stainless steel structure. Hydraulic system for lid lifting. Equipped with three agitation systems: Anchor-type agitator with Teflon scrapers + two two-blade axial turbine propellers at different heights Cowless agitator Turrax agitator Volume Total capacity 340 L Material 316/316L stainless steel Technical features Model BAXHMIX PC200 Vessel working pressure -1 bar Vessel working temperature 140 ºC Half-coil/jacket working pressure 2.5 bar Half-coil/jacket working temperature 140 ºC Half-coil/jacket volume 56.6 L Equipment configuration Jacketed Electrical panels Dimensions Inner diameter 800 mm Shell height 620 mm Transport information Length 2450 mm Width 1350 mm Height 1950 mm Documentation CE Certificate Operation Manual Drawi ...
maximum number of results exceeded
please refine your search
