b tec used for sale

Pneumatic cylinders, air cylinders, pneumatic rams, air rams, short-stroke cylinders -Stroke: 50 mm -Piston diameter: 25 mm -Piston rod: 10 mm -Price: per piece -Number: 3 pieces -Dimensions: 330/53/H53 mm -Weight: 0.30 kg/piece

Technical data for the compensating plate: Manufacturer: Bito (L) The scope of delivery includes: 01x compensating plate, used Material color: sendzimir galvanized Total width: approx. 120 mm Total depth: approx. 105 mm Material thickness: approx. 1.50 mm Hole spacing (center - center hole): approx. 95 mm Weight: approx. 0.14 kg | Pcs.

Stick electrodes 4.0 x 350 -Type: KESTRA BLUE -Weight: 4.4 kg

Servo motor, electric motor, DC motor, stepper motor, stepper motor, stepping motor -Speed: 6000 rpm -Power: 1 kW -Construction: B5 -Diameter shaft: Ø 24 mm -Number: 1 piece of motors available -Price: per piece -Dimensions: 500/165/H210 mm -Weight: 18 kg

Technical data for the compensating plate: Manufacturer: Bito (L) The scope of delivery includes: 01x compensating plate, used Material color: sendzimir galvanized Total width: approx. 120 mm Total depth: approx. 105 mm Material thickness: approx. 4.00 mm Hole spacing (center - center hole): approx. 95 mm Weight: approx. 0.37 kg | Pcs.

Technical data for the compensating plate: Manufacturer: Bito The scope of delivery includes: 01x compensating plate, used Material color: sendzimir galvanized Total width: approx. 140 mm Total depth: approx. 105 mm Material thickness: approx. 1.50 mm Hole spacing (center - center hole): approx. 110 mm Weight: approx. 0.15 kg | Pcs.

Inductive sensor, electronics sensor -Manufacturer: IFM -Type: IF5227 IFB3002-BPKG/MS -Connector: M12 x 1 -Switching distance: 2 mm -Number: 2x available -Price: per piece -Weight: 10 g

NH fuse -NH 2 -100 A 500 VAC Price: complete Quantity: 7 pieces -Weight: 4.2 kg

Heating fan, mobile heater, gas heater, gas blower -Power output: adjustable from 50 to 100 kW -Length: 560 -Width: 350 mm -Height: 500 mm -Gas type: Propane -Quantity: 1 available Price: per piece -Weight: 16 kg

Technical data for the compensating plate: Manufacturer: Bito The scope of delivery includes: 01x compensating plate, used Material color: sendzimir galvanized Total width: approx. 140 mm Total depth: approx. 105 mm Material thickness: approx. 4.00 mm Hole spacing (center - center hole): approx. 110 mm Weight: approx. 0.41 kg | Pcs.

Technical data for the compensating plate: Manufacturer: Bito (M) The scope of delivery includes: 01x compensating plate, used Material color: sendzimir galvanized Total width: approx. 150 mm Total depth: approx. 105 mm Material thickness: approx. 1.50 mm Hole spacing (center - center hole): approx. 120 mm Weight: approx. 0.18 kg | Pcs.

Thermoplastic polyurethane elastomers, pressure hose, air hose, plastic hose, barrier fences -Snow fence: 2.25 m wide -2 rolls: a 50 m -Price: complete -Dimensions per roll: Ø 350/2270 mm -Total weight: 230 kg

Technical data for the compensating plate: Manufacturer: Bito (M) The scope of delivery includes: 01x compensating plate, used Material color: sendzimir galvanized Total width: approx. 150 mm Total depth: approx. 105 mm Material thickness: approx. 4.00 mm Hole spacing (center - center hole): approx. 120 mm Weight: approx. 0.46 kg | Pcs.

Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder -Stroke: 200 mm -Piston diameter: 20 mm -Piston rod: 8 mm -Price: per piece -Number: 2 pieces -Dimension: Ø 27 x 330 mm -Weight: 0.3 kg/piece

Pneumatic cylinders, air cylinders, pneumatic rams, air rams, short-stroke cylinders -Stroke: 50 mm -Piston diameter: 25 mm -Piston rod: 10 mm -Price: per piece -Number: 2 pieces -Dimensions: 190/30/H30 mm -Weight: 0.35 kg/piece

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 500 mm -Piston diameter: 80 mm -Piston rod: 25 mm -Price: per piece -Number: 2 pieces -Dimensions: 725/95/H95 mm -Weight: 9.25 kg/piece

Pneumatic cylinders, air cylinders, pneumatic rams, air rams, short-stroke cylinders -Stroke: 25 mm -Piston diameter: 80 mm -Piston rod: 20 mm -Price: per piece -Number: 2 pieces -Dimensions: 88/99/H109 mm -Weight: 1.65 kg/piece

Proximity switch, cylinder sensor, magnetic field sensor -Diameter: 6.5mm Length: 30 mm -Cable length: 2 m -Product type: IFR 06.26.15 -Number: 5x available -Price: per piece -Weight 40 g

Demolition hammer, chisel hammer, Bosch hammer, mortising hammer -Length: 370 mm -Price: per piece -Number: 3 pieces -Dimensions: 370/21/H21 mm -Weight: 0.8 kg/piece

Gear motor, electric motor -Speed: 141/1440 rpm -Hollow shaft: Ø 32 mm -Power: 3kW -Dimensions: 500/195/H240mm -Weight: 47kg

Welding edge former, welding edge former, weld seam preparation, welding edge forming machine, edge milling device, edge milling machine, mobile milling machine -Bevel length: max. 20 mm -Dimensions box: 460/360/H355 mm -Weight: 24 kg

Blanco food serving with glass structure Blanco food dispenser refrigerated display case 40 mm granite table top Bianco Berrocal Front fairing beech fated Tray/disc chute Power supply: 230 V with lighting Metrics: Width: 254 cm Depth: 80 cm Depth with plate slide: 110 cm Height: 190 cm Information on cooling: Without compressor unit / refrigeration unit Centrally cooled for connection to external refrigeration system Last exam 09.2022 More food editions - new and used - can be found in our shop! International shipping costs on request!

UPW 25x100 Thread rolling machine Available 2 machines. Pressure 25TONS Max. Workpiece Diameter 100mm Min. Workpiece Diameter 10mm Thread Length at Plunge Operation 180mm Thread Length at Continuous Operation 2000mm/80mm Distance Of Roll Spindles 150/325mm Length Of Roll Spindle Fixtures 180mm Dia. Of Rolling Tool 230mm Roll Spindle Turning Speed Range 20-90 U/Min Shaft Dia 63mm Weight 3,25 tons

Flange mount, drive flange -Feed flange with: drive bolt -Outer diameter: 315 mm -Short cone mount for: bayonet disc attachment -Cone size: 6 -Bolt circle: Ø 133.4 mm -Weight: 20 kg

Brand 1210F - KDF210 Optimat Brand: Brandt Type: KDF 210 -1210F Year of construction: 2014 Control: Easy Control 10+ Non-contact route control Feed controlled with start-stop optic-indicative sensors Screen: LCD, 420 letters, 4 program memories Configuration: Chain conveyor feed: Standard equipment with central lubrication for the transport chain. Top pressure rollers/product guidance: Zentra control, 2 roller conveyors positioned opposite each other Joint milling unit: 2 x 0.75 KW 200 HZ Including joint milling set in DIA design, with manual positioning via Siko counter, max. 3 mm removal and max. 40 mm workpiece thickness Gluing unit A3 gluing part for hot melt glue and possibility for PU application, magazine, pressure zone with electro-pneumatic 2 point positioning via central control Pressure zone: 1st roller driven and 2 rollers running freely for good and con ...

Electric motor, three-phase motor -Power: 9.2 kW -Speed: 1420 rpm -Shaft: Ø 38 x 139 mm -Construction: B5 -Flange: Ø 230 mm -Protection class: - -Dimensions: 640/330/H360 mm -Weight: 95 kg

Backhoe bucket, excavator bucket, demolition bucket, trench bucket, excavator bucket -Execution: stable -Width: 415 mm -Height: 450 mm -Depth: 405 mm -Admission intermediate dimension: 98 mm -Bore mounting: Ø 25 mm -The recording on the spoon: can be changed by us at an additional cost -Own weight: 26 kg

Backhoe bucket, excavator bucket, demolition bucket, trenching bucket -Execution: stable -Width: 290 mm -Height: 780 mm -Depth: 930 mm -Admission intermediate dimension: 205 mm -Bore mounting: Ø 45 mm -Ripper teeth -The recording on the spoon: can be changed by us at an additional cost -Own weight: 116 kg

Lawn building machine Sembdner RS 60 R, working width 60 cm, drive F&S 2-stroke petrol engine. Reversing gearbox for forward and reverse travel. Equipment: smooth roller with scrapers at the front, hedgehog with cleaning cage in the middle, smooth roller with scrapers (water-fillable) at the rear, seed container with brush shaft and dosing slide. Technically good condition, but with flash rust and engine without ignition sparks - does not start. Branded product from Munich (Germany). Shipping optionally possible.

Tetra Pak conveyor belts - conveyors with motors for Tetra Pak beverage cartons Approx. 50 meters with engines, straight pieces and curves Subject to prior sale

Electric motor, three-phase motor -Manufacturer: ABM Baumuller, electric motor type 3.DF 63 o-4/2 -Power: 0.18 / 0.25 kW -Speed: 1390/2820 rpm -Shaft: Ø 11 x 22 mm -Construction: B14 -Protection class: IP 54 -Dimensions: 205/160 / H130 mm -Weight: 4.8 kg

diameter: . mm tool adaptor: . length: . mm total power requirement: . kW weight of the machine ca.: . t dimensions of the machine ca.: . m Range of boring knives for boring barsThe techn. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About usMore than 400 of our own machines in the warehouseMore than 12,000 m² of storage space, crane capacity 70 tMore than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company,then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Servo motor, electric motor, DC motor -Max. speed: 3000 rpm -Power: 1.92 kW -Motor torque: 8.6 Nm -Design: B5 -Number: 2x motors available Price: per piece -Dimensions: 312/108/H138 mm -Weight: 10 kg/pc.

x-travel: 1200 mm y-travel: 600 mm z-travel: 800 mm Control: Heidenhain type: TNC 426 table surface area: 1250x630 mm workpiece weight: 1000 kg Tool changer: 24 spindle taper ISO: 40 turning speeds: 30-8000 U/min total power requirement: kW weight of the machine ca.: 7,5 t dimensions of the machine ca.: 4,2x3,3x3,15 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tool changer chain, chain magazine, tool changing system, tool magazine -Spare part comes: from a machining center BJM type ALBZ-145 -Tool change system -CUT changer -RIG changer: RIG 06-12-P003 VX VCP -Drive motors: MGM -Dimensions: 1400/950/H830 mm -Weight: 380 kg

Power converter, power supply, power supply unit, servo power unit -Manufacturer: Baumüller -Type: BUS21-15/30-31-020 -Quantity: 2 available -Price: per piece -Dimensions: 400/55/H310 mm -Weight: 4.9 kg/piece

TECHNICAL SPECIFICATIONS Manufacturer: BINDER+CO Designation: BIVITEC clamping shaft screen Type: LIV/ED 2600x8 Design: Dry sieving Number of screen decks: 1 Year of construction: 2005 Screen length: 8,000 mm Screen width: 2,600 mm Weight: approx. 16.5 t SPECIFIC COMMENT - Incl. drive - Incl. supports ------------------------------------------------- TECHNICAL SPECIFICATIONS Manufacturer: BINDER+CO Description: BIVITEC Flip Flow Screen Type: LIV/ED 2600x8 Version: Dry screening Number of screen decks: 1 Year of construction: 2005 Screen length: 8,000 mm Screen width: 2,600 mm Weight: approx. approx. 16.5 t SPECIFIC COMMENT - Incl. drive unit - Incl. supports

Stock No. 2680 1x partially overhauled and functionally tested Compounding extruder double screw, co-rotating intermeshing Segmented screws and cylinder barrel (water cooled) Screws 2x 64 mm - 40 L/D Screw speed up to 1200 rpm-1 Drive 482 kW-DC Gearbox Flender safety coupling atutomatik 3x degassing venting ports ( vacuum pump optional for extra charge ) 2x side feeding dosing extruder type ZSFE 50 twin screws with dm 48.5 mm with 4 kW each, speed up to 800 rpm.-1 Control cabinet with Siemens HMI Touch OPTIONAL at extra cost: 1) Screen-pack-changer changer 2) Vacuum pump 3) Pelletizing: ST strand, - WRG waterring or - UWP underwater pelletizing system 4) Granulate classifying sieve 5) gravimetric loss-in-weight blender / dosing system 6) Material conveying 7) Big-bag filling station 8) Start-up by our technicians Visit to our factory in Wuppertal.  ...

Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder -Stroke: 125mm -Piston diameter: 25 mm -Piston rod: 10 mm -Price: per piece -Number: 2 pieces -Dimension: Ø 27 x 267 mm -Weight: 0.4 kg/piece

Pneumatic cylinders, air cylinders, pneumatic rams, air rams, short-stroke cylinders -Stroke: 160 mm -Piston diameter: 20 mm -Piston rod: 8 mm -Price: per piece -Number: 2 pieces -Dimensions: 287/30/H308 mm -Weight: 0.25 kg/piece

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 80 mm -Piston diameter: 32 mm -Piston rod: 12 mm -Price: per piece -Number: 2 pieces -Dimensions: 225/47/H47 mm -Weight: 0.85 kg/piece

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 50 mm -Piston diameter: 63 mm -Piston rod: 20 mm -Price: per piece -Number: 1 pieces -Dimensions: 245/75/H75 mm -Weight: 2.35 kg/piece

Fully automatic packaging machine for gluing and closing three flap pre – formed, top loaded cartons after filling.

Carsoe Cleanline Denester with Buffer  The systems decouples the trays fast and with precision in order for them to proceed further into the packaging line. Tray dimensions 130 x 145 mm Cleanline buffer is capable of loading up to 150+ trays a minute automatically.

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 80 mm -Piston diameter: 32 mm -Piston rod: 12 mm -Dimensions: 243/46/H46 mm -Weight: 0.8 kg

Three-phase motor, electric motor -Power: 4.6 kW -Speed: 2900 rpm -Shaft: Ø 38 x 80 mm -Construction: B5 -Protection class: IP 33 -Dimensions: 470/340/H300 mm -Weight: 57 kg

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 200 mm -Piston diameter: 80 mm -Piston rod: 25 mm -Dimensions: 415/95/H95 mm -Weight: 5.75 kg

BOY 90A (102) Description Without funnel General information Item number: 102 Availability: In stock Year of construction: 2006 Brand: Boy Specifications Injection weight: 193 g Clamping force: 900 kN Screw diameter: 42 mm Spray pressure: 1724 bar Tie bar distance: 430x360 mm Clamping plate size: 635x610 mm Tool installationheight min.: 250 mm Control: Procan CT Language: German Power: 26.3 kW Operating hours: 15070 h Weight: 3100 kg Dimensions: 4.9x1.2x2.1 m Funnel: No

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 300 mm -Piston diameter: 20 mm -Piston rod: 8 mm -Dimensions: 432/22/H22 mm -Weight: 0.3 kg

Auxiliary switch for actuator, air damper -Manufacturer: Belimo -Type: S2A -unused from: warehouse liquidation -Dimensions: 185/120/H50 mm -Weight: 300 g