134,067 used machines on RESALE, but how to find them? Machine Search
Rolls Royce Bergen B32:40 L6P engines for sale in our stock in Istanbul Turkey Bergen B32:40 L6P complete engine with turbo charger In our stock in Istanbul 3 pieces available year: 2002 3000 kw 750 RPM in good condition please contact : info@fin-marine.com
Plansichter Buhler model Mpad 6.14, 6 working channels with 14 frames each, drive shaft with motor
Floor Polisher BGM 80 A Griddle Multifunctional use for frying, cooking and cooking food The multi-roaster is equipped with a special grill surface that allows all dishes to be prepared directly on the grill plate, such as fish, meat, vegetables, rice and pasta dishes, as well as potato dishes and desserts. Due to the larger capacity, it is also ideal for dishes with sauce, such as goulash. Dimensions: W x D x H 800 x 600 x 200 mm Equipment: 2 heating zones Dimensions grill surface: W x D 740 x 540 mm Connected load: 400 V/ 8.0 kW Fuse: 16 amps Weight. 40 kg Housing made entirely of CNS, Housing 170 mm Device feet 30 mm high Height adjustable up to max. 75 mm Steel plate, specially hardened hard chrome-plated Energy-saving technology Heating infinitely thermostatically adjustable Optimal thermal conductivity Large full-surface heat storage tank Warming ...
Bartscher refrigerated table 0 °C to 10 °C 1 unit – double benefit: convection cooling ensures a constant and uniform cooling temperature inside the refrigerated table with 1 door and 4 drawers. With its high-quality and robust stainless steel surface, the appliance can be perfectly integrated into any kitchen and can also be used as a work surface. • Number of drawers: 4 • Door hinge: Left • Door Type: Hinged Door(s) • Number of doors: 1 • Number of cabinets: 1 • Cabinets refrigerated: Yes • Drawers refrigerated: Yes • Standard format drawers: 1/1 GN • Connected load: 0.452 kW | 230 V | 50 Hz • Feet height adjustable: Yes • Temperature range: 0 °C to 10 °C • Height adjustable: 850 mm to 900 mm • Backsplash: 50 mm • Cooling: Convection • Refrigerant: R134a • Digital Display: Yes • Depth GN container max.: 150 mm • On/Off S ...
Buhler separator MTMA 15.100 D, double, flow rate T100 / hour Silos
Key data: 6100 kg, 970 mm
Refurbished Beche KGH 8.0 forge hammer (built in 1980) The hammer was completely overhauled in Germany. The RAM (Schabotte) is from 2013. Control System: 2025 Description of the modernisation works: Hydraulic drive - Completely disassembled in 2024, cleaned, control valves replaced New control system - Siemens S7-1500F PLC control system with touch panel RAM (U-frame) - Contact surface ground - Insert adjusted - New wedge manufactured and hammered in Test run - Hammer was assembled in 2024 and tested in 2025 Technical description: Working capacity: 80 kJ The height max. 600 mm (without swallows) The height min. 200 mm (without dovetails) Bear depth: 810 mm Bear weight: 6100 kg Scabot weight: 105000 kg Total weight: 130700 kg Total height: 7.3 m above floor level Scope of delivery: •Hammer •Documentation The Modernisationword were well ...
Recon Part number: 0208 9754 Complete standard dimensions: 210/175mm incl. counterweights and gear incl. DNV-GL test Attention: We also have various other RECON parts of different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sale only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!
De-stoner Buhler MTSB150, overhauled, T12 / 14 hour,
Machine originates from a prominent Pharmaceutical Factory in Europe, and it is in overall excellent condition – little use, serviced and well looked after. Automatic case packer Working Description: Automatic case packer equipped with pre-stacking unit allowing to accommodate high incoming speeds of the individual product / boxes to be packed into cases and built with adjustable, horizontal flat case magazine. This CP-28 BA example is additionally fitted with following: · Infeed belt conveyor adjustable 90mm to 245mm · Automatic product pusher into case · Adjustable case opening and former station · Case closure by tape with 2 taping heads · Control panel with Siemens S7 PLC and Siemens HMI Technical information: Output up to 8 cases per minute within following min / max case sizes: Length: 220mm ...
The VT1250 is a double-sided glass drilling machine from Bavelloni , designed for precision and durability in the glass processing industry. Here are the key specifications and features: ⚙️Technical Specifications VT1250 Machine type : Double-sided glass drilling machine (top and bottom) Maximum glass thickness : Up to 25 mm Maximum drill diameter : 130 mm Range (X-axis) : 1250 mm Machine dimensions : Length: approx. 2200 mm Width: approx. 1000 mm Height: approx. 1900 mm Transport dimensions: 2.5 x 2.2 x 1.9 m Year of manufacture : Varies per model (for example 1995 for reconditioned models) Extras : Equipped with laser for positioning Double-sided drill heads (top and bottom) Automatic programming of drill heads based on glass thickness Air-controlled rack for glass positioning Why popular? Reliability : Used worldwide by glass companies because of its robust ...
Bergen L 32:40 P cylinder head covers complete. 6 pieces available also available all other major parts like: connecting rods, pistons, crank shaft, turbo charger, camshaft piece , fuel pumps etc. In our stock in Istanbul Turkey Please contact us at: info@fin-marine
BUHLER Polishing / pearling machine DSRH 15 1V 5S for seeds, groats LIKE NEW For rice, barley, wheat, spelt... Bargain..
Bakon cream blower Type: Top Cream 530 Year of construction: 2011 Stainless steel digital control Temperature indicators 1.5kW As good as new condition Height: 115cm Width: 50cm Depth: 64cm
Gram Refrigerator Type: Baker M 930 CBH 5B Stainless steel for 60x80cm and 60x40cm sheets Year of construction 2010 Coolant: R134a Height: 220cm Width: 80cm Depth: 100cm
6cm-width needle perforator / creasing machine stand model with front & back table foot pedal perforating comb creasing comb back table stop with ruler - machine has been refurbished - can be tested
We can offer Barmag FDY lines, winder model: ACW-5T, 1380mm/12 ends, hot godets model HF6, All ground floor equipments, just dismantled into warehouse.very good condition.Serious cintact us.
Compressor Bitzer Type: 6F-40.2Y-40P Volume: 151.6 m3/h Cooling capacity: 100 kW at - 5°C/40°C, 83kW at -10°C/40°C, 42.7kW at -25°C/40°C Refrigerant: R404A Pieces in stock: 6 Reference number: S 92 Condition: Used in good condition Price on request, We have many other Kealteanlagen : Bitzer,Copeland,Frascold,Lunite,Kueba,Guentner,Eco,Alfa-Laval,Goedhart ,Helpman
The original part is a main and KO extruder from Kuhne built in 2006, the system was extended in 2010 by an additional extruder from the SML (coating unit). Plant description: COEX cast film line with additional coating unit. The main plant is equipped with a co- and a main extruder. The coating unit with a main extruder. Processing of thermoplastics in a processing range of 90-300°C. The system can be operated with the following combinations: • Main unit (CoEx system) with coating unit • Main unit (CoEx system) without coating unit • Only coating unit with unwinding unit for carrier film For operation in the various combinations, the corresponding additional units are switched on or off. Possible layer structures: Main plant: - Monofilm with release film if required - 3-layer film (A-B-A) with release film if required Coating: - Monofilm on carrier material if req ...
Technical details of the machine • Long pipe filling system with 40 filling valves and 8 KK punches. • Pre-evacuation system to reduce oxygen intake. • Hygienic bottle table and stainless steel components for durability. • Mechanical control range: 3,000 to 15,000 bph. • Capacity range: 0.33l LN 3000-13500 bottles/h, 0.5l NRW 3000-12000 bottles/h • Low oxygen uptake: maximum 0.02 mg O2/l. • Conversion parts for different bottle types (0.33l longneck, 0.33l Steinie, 0.5l NRW) Advantages of the machine The machine offers numerous advantages that improve the quality of the filling process. • Quiet, product-friendly filling under a CO2 atmosphere. • 50-60% less CO2 consumption compared to short tube filling machines. • High durability due to reinforced drive elements. • Hygienic construction makes cleaning easy. • Short conversion times • Can be ...
Reference ID PP-53973 Category Bag Machines Manufacturer - Model BL66 Year Built 2003 Color 4 Impression- Working Hours - Speed-- Max. Size - Min. Size - Condition Good Location Europe Availability Immediately Machine Description a complete multiwall paper sack line Tuber: 3 unwinders Perforating unit Printing unit with 4 colors Cross pasting unit for up to 3 plies Digital lengthwise injectors for 3 plies - Maximum repeat: 1300 mm, Minimum repeat: 380 mm, Maximum width: 650 mm, Minimum width: 200 mm Transystem Bottomer: Automatic rotary feeder Bottom patch unit each side Double valve unit Maximum depth: 170 mm, Minimum depth: 80 mm, Minimum distance between centers: 250 mm, - Maximum distance between centers: 600 mm (with a maximum depth of 150 mm) A single valve carriage that can hold 2 sheets. Palletizer
NNP Brattpan Stainless 120l brattpan, LPG gas fired, manual tilt discharge, 1Ph
1 piece ABB TPL 77-B12 turbocharger complete available New In our stock in Istanbul Please contact: info@fin-marine
Refrigerator, showcase of a gas station, plus cooling area as well as deep-freeze area, including shelves Plus refrigerator consists of 4 doors, shelves, evaporator, aggregate. Minus refrigerator, consists of two turns with heating, shelves, aggregate, evaporator
Benier Dough Weigher Type: B84 1 chamber with compressed air Stainless steel cladding Speed adjustable Weight range 300-1500gram Baker's condition, as it is out of the bakery without cleaning or testing
Description Small compressor Elektra Beckum Basic Euro from 2003 very robust, mobile piston compressor – suitable for small and diverse commercial applications for single-phase alternating current with pressure reducer for controlled working pressure Technical data Intake capacity: 220 l/min Filling capacity: 110 l/min Max pressure: 8 bar Nominal intake power: 1.1 kW Speed: 2,850 /min Voltage: 230 V Boiler size: 24 l Weight: 21.5 kg Dimensions: 600 x 260 x 660 mm
Submersible pump, 250 L/min, 27 m, STA404/500-GX+121, Brinkmann Pumps, mint condition Special price If you have a VAT number, we will gladly issue you an invoice without VAT. As good as new! The pump was purchased from a company's spare parts warehouse, was in its original packaging, has never been used and is completely new. Submersible pump, 250 L/min, 27 m, STA404/500-GX+121, Brinkmann Pumps, as good as new, Immersion depth 500 m, Connection flange AD 180 mm, TK160 mm z=4, required opening for cover D140 mm, IP55, 2.6 KW, 230/400 V Special design: Base cover and impeller made of grey cast iron, shaft made of stainless steel 1.4104 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product price paid to us. ...
Bosch Turbo Scara SR6 Swivel Arm Robot The SR6/SR8 robot system consists of robust robot mechanics with four freely programmable axes. Thanks to its high speed and load capacity (up to 8 kg), the robot is predestined for assembly work and fast pick & place movements. The turboscara SR6 and SR8 are swivel-arm robots (Scara robots) with four axes and the following advantages: • Minimal cycle time with maximum precision • Large working area and different lifting distances • Defined mechanical interfaces • PC control with a wide range of communication options • Complies with international standards • Brushless drive technology reduces repairs • Integrated user installation, optional: gripper for connecting a tool connector • Integration of safety technology (safety class 3) as standard • User power supply (24 V) in the control cabinet • The BAPS programm ...
Used shredder In good condition this shredder was used inside the dutch greenhouses for taking out the final plants of tomato's, peppers etc Available directly.
Used shredder In good condition this shredder was used inside the dutch greenhouses for taking out the final plants of tomato's, peppers etc Available directly.
Butter Forming & Wrapping Machine Manufacturer: BENHIL Type: 8380 Working hours: 0 since reconditioned Capacity: 40... 90 Pa./min, infinitely adjustable Products: Butter, Margarine etc Choose Format: 250 gr. (100x70x35 mm) Folding: bottom folding Packing material: aluminium foil, parchment paper Dosing: volume doser from 100 .. 300 gr. Dosing precision: +/- 1 % Energy: 380 V/50 Hz; 2,2 KW Weight: 1.600 k
Rated current (A): 1000, Poles: 3; Gross weight [kg]: 41; Accessories: Multiple breakers in stock!, NEW/UNUSED
Wittmann Battenfeld Injection Moulding Machine Here we offer you a SmartPower 210/1330 Thermoset machine. Wittmann Battenfeld injection moulding machine with UNILOG B8 control system Plant was serviced by the manufacturer WITTMANN BATTENFELD Deutschland GmbH in January 2021 / checked and brought up to date As part of the complete review, various updates were installed and the hydraulic oil (600 liters) was refilled. In addition to the already normally existing pressure switches, the system consists of the possibility to install additional internal mold pressure switches 2 pieces Kistler module for mold internal pressure switching range 1: 20,000 pC, range 2: 10,000 pC). The parts for the upgrade mold internal pressure switches are part of the scope of delivery. Injection molding machine: Series: SmartPower Machine type: 210/1330 Control type: UNILOG B8 Machine number: ...
Rated current (A): 3200, Poles: 4; Gross weight [kg]: 75; Accessories: Multiple breakers in stock!, NEW/UNUSED
Rated current (A): 4000, Poles: 4; Gross weight [kg]: 99; Accessories: Multiple breakers in stock!, NEW/UNUSED
Rated current (A): 1250, Poles: 3; Gross weight [kg]: 41; Accessories: Multiple breakers in stock!, NEW/UNUSED
Rated current (A): 2500, Poles: 3; Gross weight [kg]: 61; Accessories: Multiple breakers in stock!, NEW/UNUSED
Engine Brand: ANGLO BELGIAN CORPORATION, Conditie: USED, Engine Color: Red , Engine Condition: Core , Rated Power: 662 Kw, Rated Speed: 750 Rpm, , https://www.hamofa.com/stock/diesel-engines/anglo-belgian-corporation- 6mdxc-used/350, , = More information =, , Type: Engine, Type of fuel: Diesel, Type number: 6MDXC
0: - Beutel/min 0: - mm 0: - mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Conical rounder Benier Bakery Teflon -Cone round knitter with Teflon cone and warp knitting rings
CHP used year 2005 Condition unknown. I did it myself about 5 years ago in unknown condition bought from a dealer, and wanted it the last few years at but finally decided to use a heating oil company. I did not get any information about the condition when buying and can therefore absolutely no Make a statement, but you can see, from the color differences, that already several parts such as .b the cylinder head and the starter were replaced. The price is € 6,000.00 excluding any liability or warranty. For technical data, please refer to the manufacturer's homepage.
2x Bilz FAEBI 430 + 2x Wedge Shoes - Rubber Air Springs / Machine Feet - 2x wedge shoes + base - 2x Bilz FAEBI 430 rubber air springs + substructure - 9x spacers - By adjusting the air pressure, the deflection behavior can be adjusted - Wear-resistant, low-maintenance air damping, easily adjustable from the outside - No transmission of structure-borne noise Specifications FAEBI 430 Rubber Air Spring: - Load: 2750 - 6500 daN - Max. pressure: 6 bar - Cushion height: approx. 90 mm - Cushion diameter: 480 mm - Support diameter: 315 mm - Dimensions incl. substructure LxWxH: 510 x 510 x 200 mm - Threaded rod: M20 / 180 mm Wedge shoes: - Dimensions incl. substructure LxWxH: 330 x 250 x 200 mm Spacers: - Diameter: 470 mm - Thickness: 2x 4 mm / 2x 2 mm / 2 x 1.5 mm / 3x 1 mm
From a current recycling we offer you an exclusive lens set. These are 3 CANON lenses "rehoused" by TLS True Lens Services. In detail, they are: 20mm nFD f/2.8 (1990) Serial Number 43174 24mm FD 1:1.4 L (1983) Serial Number 18574 35mm nFD 1:2 (1979) Serial Number 15437 The serial numbers were queried and confirmed from TLS. Year of manufacture: see brackets Condition: good Asking price: VHB Factory Price: Location: 10553 Berlin Equipment / accessories / other information: Asset Manager: M. Vorkötter Phone: 0202-25727-3152 Mail: m.vorkoetterakf.de We will be happy to provide you with details upon request. The sale is without warranty Subject to prior sale
turning diameter over bed: 490 mm turning diameter over slide rest: 280 mm turning length: 2000 mm centre height: 245 mm centre distance: 2000 mm spindle bore: 62 mm total power requirement: 7,5 kW weight of the machine ca.: 3,5 t dimensions of machine L x W x H: 3,78 x 1,17 x 1,42 m Accessories: 3-jaw chuck 240 mmø, face plate 400 mmø, MULTIFIX-tool post, solid steady, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
maximum number of results exceeded
please refine your search
