b tec used for sale

Injection pump from a Liebherr excavator Operating hours approx. 2,000 hrs pump was upgraded to electric Storage device is replaced. Pump is fully functional Special price

Bosch Turbo Scara SR 800EC robot + control IQ 150 + handheld control unit PHG 2000 Manufacturer: Bosch Order No. 3842506428 Series No. 764840020 Maximum load on gripper flange: 100 N Stroke 3rd axis 320 mm Pn.-Duuck 4-8 bar Weight: 100 kg Swivel range see diagram Item condition used In addition to about 50 paternosters, countless other machines such as presses, robots, furnaces, industrial vacuum cleaners, etc. are available. Workshop equipment, workbenches, workshop trolleys, tools, forklifts and shelves abundantly available A total of 24,000 m² of production space will be dismantled and sold Please also note our other offers.' After purchase, the amount is due within 7 working days.

Charging for forklift battery suitable for 40 cells 80 Volt 40 Ampere good condition More used loaders 24Volt, 48Volt, 80 Volt from 55 amperes to 200 amperes at the camp, please ask. Special price

Qty. 1 Second-hand section rolling mill plant Mfc.: Pomini, OMV, BM, Bendotti Built: 1989 continuously modernised Stopped: 2019 Installed power: 16.2 MW Billet income sizes: 120 x 120 up to 160 x 160 mm Length: 6.0 m Section production: Round bar dia.: 30 – 60 mm Angles from 30x3 up to 100x12 mm U” channel from 40x20 and 120x55 mm T” shape from 30 till 100 mm T” shape from 30 to 120 mm (Special for elevator rails- Leader in Europa) The rolling mill can be implemented with many other profiles by using different grooved rolls. Production capacity: 250,000 – 270,000 T/annum depending on the production mix Scope of supply: Reheating furnace Section rolling mill line Tying Machine Descaler Bundle Machine Cooling tower Machine shop

Special charging device with pulse device. Weight approx. 250kg! 48Volt 150 ampere. With this loader, you can regenerate old batteries. Charging for forklift battery suitable for 24 cells 48 Volt 150 Ampere very good condition First picture similar! second and third picture of the original! More used loaders 24Volt, 48Volt, 80Volt of 55 amperes up to 200 amperes at the camp, please please ask. Varta Belatron Deta Special price

Manufacturer Ruefli AG SA Biel - Bienne Very powerful exhauster, suction system Spaene suction with filter bag for woodworking machines, Power 2.2kw 2850rpm. machine probably unused except for advance guidance. Special price

The CP22 belongs to the series of gasoline-powered high-pressure machines with a pressure of 170 to 500 bar and a volume flow of 16 to 46 l/min. The machine has pneumatic tyres with a parking brake on the rear axle and swivel castors on the front axle. The frame consists of hot-dip galvanized and powder-coated sheet metal molded parts with circumferential stainless steel side frames. The machine measures 1060 x 760 mm and is 850 mm high. The Honda engine is equipped with electric starter. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- Model Pressure Volume Flow CP22-170 170 bar 46 Lpm CP22-220 220 bar 36 Lpm CP22-280 280 bar 27 Lpm CP22-350 350 bar 23 Lpm CP22-500 500 bar 16 Lpm General Specifications: ----- Drive motor: 2 Cylinder 4 Stroke Petrol Engine, Electric Start Power of the drive motor: 16.4 kW Spee ...

diameter 200mm, little used, dusted, good condition.4 Bolts with bolt spacing approx. 94mm, Hole circle diameter of the bolts approx. 133mm, the largest diameter of the short cone approx. 106mm, Drawbar in the middle. All information to the best of our knowledge but without any information. Special price

Hand lever plate and profile steel shears heavy and stable outing cuts sheets, round steel (approx. 15mm), flat steel and T-profiles Mounted on base Special price

Qty. 1 Second-hand section rolling mill plant Mfc.: Pomini, OMV, BM, Bendotti Built: 1989 continuously modernised Stopped: 2019 Installed power: 16.2 MW Billet income sizes: 120 x 120 up to 160 x 160 mm Length: 6.0 m Section production: Round bar dia.: 30 – 60 mm Angles from 30x3 up to 100x12 mm U” channel from 40x20 and 120x55 mm T” shape from 30 till 100 mm T” shape from 30 to 120 mm (Special for elevator rails- Leader in Europa) The rolling mill can be implemented with many other profiles by using different grooved rolls. Production capacity: 250,000 – 270,000 T/annum depending on the production mix Scope of supply: Reheating furnace Section rolling mill line Tying Machine Descaler Bundle Machine Cooling tower Machine shop

Reinforced steel scissors Round iron scissors Scissors Manufacturers Muhr and Bender Type 50N/22 and 50N/28 50N/22 intersects at 450N/mm2: Round: 22mm Square 22mm Flat: 35x10mm 50N/28 intersects at 450N/mm2: Round: 28mm Square 24mm Flat: 40x15mm Both machines new and ovp Special price

New 10 000 l water tank with base (was only filled with water!); as good as new

Workbench width: 2,860 mm / Height: 900 mm / Workbench depth: 800 mm We offer you here a used workbench frame of the manufacturer Vogelsang for sale. Technical data for the workbench frame: Manufacturer: Vogelsang Type: NS Included in delivery are: 02x workbench stand, new Material colour: sendz. galvanized Stand height: 900 mm Stand depth: 800 mm Incl. transverse and diagonal struts, base plates The stands are pre-assembled ( screwed truss ) 04x workbench trusses, used Material color: orange Box profile: 110 x 50 mm Clear width: 2,700 mm 08x safety pins, used Version: completely galvanized The pictures serve to clarify the material. The material colour may vary. - The workbenches are picked unassembled; - The workbench stands are pre-assembled; - The production time is usually about 3 - 5 working days.

Workbench width: 2,860 mm / Height: 900 mm / Workbench depth: 1,000 mm We offer you here a used workbench frame of the manufacturer Vogelsang for sale. Technical data for the workbench frame: Manufacturer: Vogelsang Type: NS Included in delivery are: 02x workbench stand, new Material colour: sendz. galvanized Stand height: 900 mm Stand depth: 1,000 mm Incl. transverse and diagonal struts, base plates The stands are pre-assembled ( screwed truss ) 04x workbench trusses, used Material color: orange Box profile: 110 x 50 mm Clear width: 2,700 mm 08x safety pins, used Version: completely galvanized The pictures serve to clarify the material. The material colour may vary. - The workbenches are picked unassembled; - The workbench stands are pre-assembled; - The production time is usually about 3 - 5 working days.

Workbench width: 2,980 mm / Height: 938 - 946 mm / Workbench depth: 800 mm We offer you here a used workbench of the manufacturer Jung Heinrich for sale. Included in delivery are: 02x workbench stand, used Material color: blue Frame profile: 76.2 - 100 mm Stand height: 900 mm Stand depth: 800 mm Incl. transverse and diagonal struts, base plates The stands are pre-assembled ( screwed truss ) 04x workbench trusses, used Material color: orange Box profile: 85 x 40 mm Traverse type: GN85x41mm Clear width: 2,775 mm 08x safety pins, used Version: completely galvanized 01x Chipboard II. Choice, used Thickness chipboard: 38 - 46 mm Width chipboard: 2,980 mm Depth chipboard: 800 mm Surface: coated if necessary (possibly two-part) 01x Chipboard II. Choice, used Thickness chipboard: 38 - 46 mm Width chipboard: 2,755 mm Depth chipboard: 800 mm Surface: coate ...

Workbench width: 2,980 mm / Height: 938 - 946 mm / Workbench depth: 1,000 mm We offer you here a used workbench of the manufacturer Jung Heinrich for sale. Included in delivery are: 02x workbench stand, used Material color: blue Frame profile: 76.2 - 100 mm Stand height: 900 mm Stand depth: 1,000 mm Incl. transverse and diagonal struts, base plates The stands are pre-assembled ( screwed truss ) 04x workbench trusses, used Material color: orange Box profile: 85 x 40 mm Traverse type: GN85x41mm Clear width: 2,775 mm 08x safety pins, used Version: completely galvanized 01x Chipboard II. Choice, used Thickness chipboard: 38 - 46 mm Width chipboard: 2,980 mm Depth chipboard: 1,000 mm Surface: coated if necessary (possibly two-part) 01x Chipboard II. Choice, used Thickness chipboard: 38 - 46 mm Width chipboard: 2,755 mm Depth chipboard: 1,000 mm Surfac ...

BARATTI FRAMED VACUUM PUMP WITH SUCTION FILTER AND SILENCER Fabr. -No.: 216 105 // Type: ATMOS V4-KR Var. 0102 Equipment / Additional information: Roots Blower Section. oil and wear-free compression, air-cooled, V-belt drive with tension rails and belt guard and two-stage exhaust silencer Incl. the following accessories: -Vacuum relief valve -saugs. Fine filter 3" -Connection piece internal thread 3" - Rohrfederman. -1..0 bar, filled with glycerine -Drive motor Blower data: Max. negative pressure: 500 mbar, abs. Suction volume: 440 m3/h Fan speed: 2920 rpm Noise level: approx. 79 dB (A) Engine data: 7.5 kW, 2930 rpm, 400/690 V, 50 Hz, IP 55 ISO class F, B3, KKL

Cold water high-pressure cleaner Welcome to the innovative and compact me-Class! The DYNAJET 280me with up to 280 bar Working pressure convinces in addition to its performance above all by its compact Dimensions and high mobility. This makes the versatile high-pressure cleaner one of the All-rounders in our offer. Construction Robust, powder-coated steel frame for optimum machine protection and long service life 1-axle chassis with pneumatic tyres for easy manoeuvring on site Flexibility and support due to perfect center of gravity High durability due to screw connections made of stainless material Splash-resistant (IP54) control cabinet for versatile and smooth use Operating hours counter for optimal post-calculation Drive Manual star/triangle start to protect the power grid Compact and robust industrial electric motor for long service life with maximum running times ...

DYNAJET 500me/30 basic - 400V/50Hz pressure washer INTRODUCTORY OFFER: If you want to be sure that this device is right for you, then we have a special offer for you: Crediting of rents for up to 6 months at 100% of the purchase price! Welcome to the compact me-Class with a particularly high flow rate! In contrast to its smaller colleague DYNAJET 500me, the more powerful DYNAJET 500me 30 basic with up to 500 bar working pressure achieves a flow rate of 30 l/min (1800 l/h) for particularly demanding tasks. Of course, the DYNAJET 500me 30 basic convinces not only with its high performance, but above all with its compact dimensions and high mobility. Construction - Robust, powder-coated steel frame for optimum machine protection and long service life - High durability due to screw connections made of stainless material - Crane eyelet for easy transport and handling - Splash w ...

New device incl.pre and combined filters The compact device offers many areas of application - the filters used are characterized by a long service life - the two filter cassettes separate dust, fine dust and gases - Dimensions 1197 x 600 x 790mm - Suction capacity 1250m³ / hour -400v ph 50/60Hz with red 16A CE plug - Hose connection 125mm Ø - incl. option external start / stop ( with 24V DC via 2-wire cable on the back side ) to activate via micro switch - Warranty 12 months ( filter excluded ) Typical applications : Marking laser Engraving laser Cutting lasers Options: - Suction hose in the necessary length - Connection sleeves - Suction nozzles

1 used Nordson order head, type Mini Blue II SureBead, 230V / 100W, with solenoid valve and 40-degree connection, built in 2013. 10 pcs. available (intermediate sale reserved).

The IQ control keeps the set air flow the same during runtime. MA-201030 Optional: In stainless steel, , hose set, VOC, filter change signal, start/ stop via external 24V - the compact device offers many areas of application - the filters used are characterized by a long service life - the two filter cassettes separate dust, fine dust and gases - the air flow is 850 m³/h - the dimensions are 1197 mm x 600 mm x 790mm (HxLxW) - Weight 140 kg - Noise level less than 61 dBA Options: - Suction hose in the necessary length - Connection sleeves - various suction nozzles Typical applications : Marking laser Engraving laser Cutting lasers Welding laser Soldering and welding fumes

1 used Nordson 16 foot hose, Blue Series, 240V/504W. Built 2013. Nordson part number 2747976. 6 pieces available (intermediate sale reserved).

Suction AD-Oracle IQ from Bofa - New : The IQ control keeps the set air flow the same during runtime. Optional: In stainless steel, , hose set, VOC, filter change signal, start/ stop via external 24V - the compact device offers many areas of application - the filters used are characterized by a long service life - the two filter cassettes separate dust, fine dust and gases - the air flow is 380 m³/h - the dimensions are 980 mm x 430 mm x 430 mm (HxWxD) - Weight 68 kg - Noise level less than 60 dBA Options: - Suction hose in the necessary length - Connection sleeves - various suction nozzles Typical applications : Marking laser Engraving laser Cutting lasers Welding laser Soldering and welding fumes

1 used Nordson 24 foot hose, Blue Series, 240V/760W. Built 2013. Nordson part number 274797. 6 pieces available (intermediate sale reserved).

4 drum pumps; pneumatically operated; suitable for 200L faessers; with base and distribution line.; Ready. At this point we allow ourselves to note that all offered machines are in our unrestricted possession or access and are present in our warehouse. Visits and demonstrations are possible on request in our premises. We would also be pleased to inform you about our complete stock, as only part of our portfolio is presented here.

DYNAJET 500th HELI Blue Performance INTRODUCTORY OFFER: If you want to be sure that this device is right for you, then we have a special offer for you: Crediting of rents for up to 6 months at 100% of the purchase price! For purchase: Including 1st UVV WITH arrival and maintenance (plus spare parts) on the same date (value approx. 1,500 net). The mobile and universally applicable dynaJET 500th cold and hot water high-pressure cleaner with up to 500 bar working pressure is characterized not only by its user-friendliness but also by its low weight, compact dimensions and high performance and safety level. Construction: • 1-axle chassis for easy manoeuvring • Self-supporting and indestructible framework for weight optimization • Central crane eyelet for optimal transport in hard-to-reach places • Frame in dip painting technology for high corrosion protection and hi ...

Beckmann Ultracentrifuge

TRIOGEN E-BOX ORC for sale. Model: E-BOX ORC Year: 2017 Hours: 0 Capacity: 170 kW Hz: 50 Voltage: 400 V Scope of supply: Complete ORC E-Box. The E-Box is primarily an E-Box 170kWe Power, but can be also an E-Box 170 CHP (Vario). General Information: E-Box 170 Power – this is when the working fluid condensing (cooling) temperature is at 55degC, this is specific to recovering hot gas at around 500degC (engine exhaust for example). To achieve full power (170kWe gross), the cooling water needs to operate at 55degC, this generating maximum power of 170kWe refer to graph given at cooling temp of 55degC = 170kWe. Price: £240,000 . Available for sale from Gas Engine Exchange. Please check our complete range of equipment at gasengineexchange.

Cold water high-pressure cleaner with 7.5 kW power 270 bar pressure and 15 l/min. Connection: 400 V; 50 Hz; 16 A Equipment: - Stainless steel frame - Powerful motor with long service life due to low speed - High pressure pump with brass cylinder head, all-ceramic pistons and stainless steel valves oil bath lubricated, low noise and vibration-free - Good handling due to pipe diameter of 38 mm - Ergonomically designed for good mobility - Very manoeuvrable to drive due to optimized device center of gravity - Chassis with solid rubber tyres - Crane lifting points - Lance holder on the left and right side of the device - Water inlet temperature up to max. 60° (standard) - Chemical suction as standard for devices up to 21 l/min at 200 bar - 10 m power connection cable, 16 A plug Standard accessories: - 10m high pressure hose DN10, kink protection on both sides - HDP350 ...

Cold water high-pressure cleaner with 2.2 kW power 150 bar pressure and 8 l/min. Connection: 240 V; 50 Hz; 10 A Equipment: - Stainless steel frame - Powerful motor with long service life - High pressure pump with brass cylinder head, all-ceramic pistons and stainless steel valves oil bath lubricated, low noise and vibration-free - Good handling due to pipe diameter of 25 mm - Ergonomically designed for good mobility - Very manoeuvrable to drive due to optimized device center of gravity - Chassis with solid rubber tyres - Crane lifting points - Water inlet temperature up to max. 60° (standard) - 10 m power connection cable - Automatic stop system Standard accessories: - 10m high pressure hose DN6, kink protection on both sides - HDP350 high pressure gun - High pressure jet tube with nozzle 030 Optional (additional cost): - Hose reel with 15 m hose The imag ...

Bickel HK 3/50; good condition; Working width 500mm; Stand model; with slot and perforating tool; Foot Switch. ; ready to go. At this point we allow ourselves to note that all offered machines are in our unrestricted possession or access and are present in our warehouse. Visits and demonstrations are possible on request in our premises. We would also be pleased to inform you about our complete stock, as only part of our portfolio is presented here.

Cold water high-pressure cleaner with 15 kW output 380 bar pressure and 21 l/min. Connection: 3 x 400 V; 50 Hz or 3 x 460 V; 60 Hz.; 32 A Equipment: - Epoxy coated steel frame - Stainless steel cover - Compact, narrow chassis with stop function - Crane lifting device - Triplex high-pressure pump - Water inlet temperature max. 60°, thermal valve - Main switch with emergency stop function - Soft automatic start-up - Grid monitoring (phase control and undervoltage) - Connection cable 5.0 m with 32 A plug (50 Hz/60 Hz) - Water inlet filter Standard accessories: - 10m high pressure hose DN10, kink protection on both sides - High pressure gun with isotube - Double jet tube and high pressure nozzle 030 Special equipment (included in the price): - Automatic start-stop with flow switch and switch-off delay 30 seconds - Water inlet filter 10" with sand filter insert and ...

Hot water generator KENT Duo HotBox 500 bar Description: - Working pressure: up to 500 bar - Flow rate: 2 x 11-56 L/min. - Burner: oil / approx. 90 KW - Tank: approx. 20 L - incl. Automatic Start/Stop Flow - incl. flame control - incl. operating hours counter - Chassis: Black lettered - Hood stainless steel Features: - Powder-coated frame with stainless steel cover - 4 wheel chassis with solid rubber tires - fan motor, - Oil pump - KENT burner boiler with approx. 90 KW heating capacity - Automatic switch-off start-stop flow controlled - incl. E-connection cable - Water inlet temperature max. 60°C Scope of delivery: - Inlet hose Dimensions: (L x W x H in mm) 1000 x 680 x 760 Weight: approx. 190 Kg Shipping possible. Prior sale and error excepted. The terms and conditions of Cleantec-MR apply.

Cantilever rack NEW Data: - H : approx. 400 cm - D : approx. 137 cm - L : approx. 402 cm - Cantilevers : approx. 120 cm - Axle dimension: 131 cm - NEW GOODS immediately from stock. - 500 kg load per arm - 2250 kg load per stand - Stand in hot-dip galvanized. - Cantilevers in hot-dip galvanized. - Arms are screwed. - Arms adjustable in 200 mm pitch. - Levels: feet + 3 storage levels (4 storage levels) Shelf consists of: - 04 x stand, incl. base approx. 400 cm made of IPE160. - 16 x cantilevers approx. 120 cm made of IPE 80 - incl. all necessary fasteners and screws. Why BLT cantilever racks ? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load capacities of the shelf stands and cantilevers are statically detectable, at 100% load. - All racking systems are supplied in hot-dip galvanized version. They can therefore be placed insid ...

Cantilever rack NEW Data: - H : approx. 300 cm - D : approx. 137 cm - L : approx. 402 cm - Cantilevers : approx. 120 cm - Axle dimension : 131 cm - NEW GOODS immediately from stock. - 500 kg load per arm - 2250 kg load per stand - Stand in hot-dip galvanized. - Cantilevers in hot-dip galvanized. - Arms are screwed. - Arms adjustable in 100 mm pitch. - Levels: feet + 3 storage levels (4 storage levels) Shelf consists of: - 04 x stand, incl. base approx. 300 cm made of IPE160. - 12 x cantilevers approx. 120 cm made of IPE 80 - incl. all necessary fasteners and screws. Why BLT cantilever racks ? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load capacities of the shelf stands and cantilevers are statically detectable, at 100% load. - All racking systems are supplied in hot-dip galvanized version. They can therefore be placed insi ...

Cantilever rack NEW Data: - H : approx. 350 cm - D : approx. 137 cm - L : approx. 402 cm - Cantilevers : approx. 120 cm - Axle dimension: 131 cm - NEW GOODS immediately from stock. - 500 kg load per arm - 2250 kg load per stand - Stand in hot-dip galvanized. - Cantilevers in hot-dip galvanized. - Arms are screwed. - Arms adjustable in 100 mm pitch. - Levels: feet + 3 storage levels (4 storage levels) Shelf consists of: - 04 x stand, incl. base approx. 350 cm made of IPE160. - 16 x cantilevers approx. 120 cm made of IPE 80 - incl. all necessary fasteners and screws. Why BLT cantilever racks ? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load capacities of the shelf stands and cantilevers are statically detectable, at 100% load. - All racking systems are supplied in hot-dip galvanized version. They can therefore be placed insid ...

25x 250 ltr. VA2 transport tanks / transport containers, slightly pressure-resistant, manufacturer: Umformtechnik Hausach, used, round standing, stackable (only empty recommended), dom above NW 125 with safety valve system Stöklin + 2x CO2 valve large NW 40 + small NW 25 system Stöklin, residual outlet with disc valve NW 50, operating pressure 0.9 bar, test overpressure 2 bar, pressure resistant for e.B. overlay with CO2 or CO2 impregnate, ideal also for refilling barriques, Weight/h.: 57 kg, cleaned inside, very stable design, can be driven under with pallet truck or e-ant Diameter: 0.62 m, H: 1.50 m, Price/hour: 550,- € plus VAT ex warehouse Dolgesheim

Special price for stock goods! Only while stocks last! Drilling-milling machine: Bernardo Type/Model: FM 45 HSV with digital display Condition: new Drilling capacity in steel: 32 mm Drilling capacity in cast iron: 40 mm Knife head milling cutter max.: 80 mm Projection: 220 mm Spindle speed: (12) 75 – 3200 rpm Spindle holder: MK 4 Pinole stroke: 120 mm Pinole feed: (3) 0.10 / 0.18 / 0.26 mm/U Table size: 800 x 240 mm Travel (x / y): 555 / 205 mm Milling head swivel: -60° to +60° Distance spindle / table: 60 – 485 mm Height adjustment milling head: 425 mm T-slot size: 14 mm Motor output power S1 100%: 1.1 / 1.5 kW (400 V) Motor input power S6 40%: 1.5 / 2.2 kW (400 V) Machine dimensions (W x D x H): 1140 x 770 x 1500 Weight approx.: 308 kg without base Characteristics: - High-torque 2-stage motor, speed range 75 - 3200 rpm - Double-sided swivelling m ...

Hettich-blue-mini-MAX Hardware drilling machine Type Blue-Max-mini Spindle number 4 Table-top model Motor 0.75 KW 400V 50 Hz Masch. No. 01395 Manual drill feed without stand (optional) Built in 1995 G & 2827-M3I2J

Hot and cold water high-pressure cleaner Working pressure: infinitely variable up to 500 bar Maximum requirement quantity: 14-30l /min Pump:3-Plunger,All-Ceramic Engine: Hatz,3-cylinder diesel (water-throated) Motor power:42kW Speed motor/pump: 2,350 /1,450 rpm Pump drive:V-belts Fuel consumption:approx. 5.3 l/h Volume fuel tanks:70l/105 l Volume water tank: 1000 l Pressure outlet:(water): M241.5 IG Heating capacity olburner: 291 kW (ca 95 °C) Consumption olburner: approx. 9.1 l/h Construction: self-supporting frame on frame with forklift pockets Empty weight: approx. 1,450 kg Mass: (LWH) 220+147177 Ground open (LWH) 307147246 Article no.: 1 491 030

Rotary vane vacuum pump Manufacturer: Becker Type: U4.630 SA/K o. F/K Vacuum: 3 mbar - 0.5 mbar motor: 15KW Status: used, tested! The general recreation for the Geraet is offered separately! Inclusive: oil filling, vacuum intake filter delivery time: from stock!; ready for use

Briggs & Stratton Emergency Generator 15 kVA NEW - - - - - Engine - Briggs & Stratton - 2 cylinders - Air-cooled - 627 cm³ - - - - - Generator - Power: 14.5 / 12.5 kW - Voltage: 230 / 400 Volt - Frequency: 50 Hz. - 28.3 amps - - - - - Equipment - Electric start - Manual start by cable pull - Large 45 liter tank - AVR regulator (for exact compliance with the voltage) - Oil level sensor - Overload protection - Sockets: 1x 230 V, 1x 400 V (16A) - Hour display - - - - - Other data - Dimensions: 79 x 58 x 76 cm - Weight: 131 kg - - - - - Price and payment - 2950,- € + 19 % VAT = 3.510,50 € - Payment: Prepayment - A proper invoice with VAT will be created - - - - - Accessories (can be ordered optionally) - Wheelset with push rods - Flexible exhaust hose 2.5 mtr. - Maintenance kit for the first maintenance (consisting of engine oi ...

Rotary vane vacuum pump Manufacturer: Becker Type: U5.100 Suction power: 100 m3/h end pressure: 0.1 mbar (abs.) Inclusive: Gasbalast, oil filter Status: Performance Performance: 12 months delivery time: from stock; ready for use

Briggs & Stratton Emergency Generator 20 kVA NEW - - - - - Engine - Briggs & Stratton - 2 cylinders - Air-cooled - 896 cm³ - - - - - Generator - Power: 19.5 / 17.5 kW - Voltage: 230 / 400 Volt - Frequency: 50 Hz. - 39.1 amps - - - - - Equipment - Electric start - Manual start by cable pull - Large 45 liter tank - AVR regulator (for exact compliance with the voltage) - Oil level sensor - Overload protection - Sockets: 1x 230 V, 1x 400 V (16A) - Hour display - - - - - Other data - Dimensions: 90 x 58 x 89 cm - Weight: 160 kg - - - - - Price and payment - 3650,- € + 19 % VAT = 4343,50 € - Payment: Prepayment - A proper invoice with VAT will be created - - - - - Accessories (can be ordered optionally) - Wheelset with push rods - Flexible exhaust hose 2.5 mtr. - Maintenance kit for the first maintenance (consisting of engine oil ...

BOSCHERT G CUT 2504 CNC guillotine shears were manufactured in 2014 in Germany. The guillotine is designed for cutting metal sheets with a maximum length of 2600 mm and a thickness of 4 mm (mild steel st42) or 2 mm (stainless steel). The sheet metal is held in place by 13 hydraulic clamps and, thanks to the installed CNC controller with touch panel, it is also possible to store many different work programmes, making the machine very useful and versatile. After entering the parameters of the steel sheet to be cut, the controller automatically sets the cutting gap, choices the angle of the upper knife and the appropriate pressure force and then starts the cutting process. The guillotine is also equipped with, among other things: a foot control to facilitate the operator’s work, light curtains to prevent a worker from entering the working area of the machine and an automatic metal shee ...

PIN cutting machine Berrone one-sided for window manufacturing with pneum. Stop 1. trimming saw 2. pivot cutters top / bottom 3. Groove cutter L x W x H: 250 x 200 x 200 cm Year of construction 1983 Weight approx. 750 kg The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Built in: 1989 Size: max 1.700 x 1.300 mm lifting capacity: max 2.000 kg Stroke height: 1.000 mm ; working condition