b tec used for sale

Micro Brewery 2-Vessel 5hl Braukon 750hl / annum The brewery is a modular 5 hl two-vessel Braukon brewhouse system with a separate whirlpool, designed for production of both top- and bottom-fermented beers. Brewing is controlled with manual valves, but brew vessels and temperature controls are made with Braukon brew control PLC. Upto 18° Plato high gravity beer production is also possible with this brew line. Brew vessels are bottom heated with hot water generated with plate heat exchanger from low pressure steam and wort is heated with external boiling system. The 2-vessel system is constructed entirely in stainless steel (AISI 304) and delivered as a fully integrated, pre-piped and pre-wired unit, enabling rapid relocation works. Nominal capacity is 3–4 brews per day, depending on recipe and process parameters which is approx. 750 hl/annum. Brew control is semi-automatic and made ...

Beer transport tank in a shipping container, with CIP spray head and manhole. Includes a metering system (max. flow rate: 120 l/min)., Additional title: Stainless steel pressure tank housed in a container, Capacity: 7200 l, Operating pressure: 2,5 bar, Operating temperature: 20 °C, Length: 7,25 m, Width: 2,4 m, Height: 2 m, Features: control, pump, hose reel, flow meter, cable drum, fittings, CIP spray head, manhole

Flotation tank. - Designed for cooling with ammonia (can also be cooled with glycol), 1 x frame cooling. - Stainless steel - Insulated and clad - Stand frame, short - Cleaning air fitting with safety valve, Additional title: Refrigerated stainless steel tanks for outdoor installation, Capacity: 74480 l, Operating pressure: 0,9 bar, Width: 12,55 m, Height: 3,27 m, Material: Stainless steel, Position: vertical, Base construction: short supporting skirt, Features: Cooling: 1 x side wall cooling jacket; insulation; dearation and cleaning combination with safety valve; temperature measurement

Malt scale with digital display, Additional title: Continuous flow scale with digital display, Fill sizes: 24 l, Capacity: 300 fills/h, Nominal capacity: 7 m³/h, Voltage: 240 V, Frequency: 50/60 Hz, Compressed air: 5 - 6 bar, Weight: 130 kg

CONTROLS   conventional PRESS FORCES   total force (nominal): 75 to PRESS TABLE   table surface (left-right): 1250 mm   table surface (front-back): 1110 mm SLIDE   table surface (left-right): 960 mm   table surface (front-back): 750 mm SLIDE (MECHAN. PRESS)   slide adjustment: 80 mm   stroke adjustment: yes   stroke min.: 10 mm   stroke max.: 50 mm   stroke rate (min.): 120 /min   stroke rate (max.): 600 /min STRIP-FEEDER   feeder type: roll feeder   sheet width max.: 300 mm ELECTRICAL SPECIFICATIONS   total power consumption: 15.5 kW DIMENSIONS / WEIGHTS   total weight approx.: 13500 kg ATTACHMENTS (PRESSES)   strip feeder: yes   feeder type: roll feeder

- Producer Heesemann - Type MFA 8, Quer/Längs/Längs/Bürste - Year of construction 1998 - 1. Unit - Cross belt - Electronic sanding beam CSD - Fins belt - Belt speed 1. Stufe 0,6-12 m/s - 2. Stufe 24 m/s - Measure sanding belt 4800 x 150 mm - Motor power 11/17 kW - 2. Unit - Length belt - Electronic sanding beam CSD - Fins belt - Belt speed 3,5/10 m/s und 20 m/s - Measure sanding belt 2620 x 1350 mm - Motor power 4,5/12/17 kW - 3. Unit - Length belt - Electronic sanding beam CSD - Distance follower roller 32 mm - Dedusting brush 1 Stk. - Touchscreen with graphic design - Table length extension - Aggregate height adjustment - Electric height adjustment - Feed speed infinitely adjustable 3 - 15 m/min - Vacuum transport belt - Connecting piece 4x180 + 1x146 mm - Air speed main collector 20 m/s - Consumption of compressed air ~ 134,5 + 72,0 m³/h - Length 2.385 mm - Width 2.300 mm  ...

few operating hours laboratory machine - Producer Büftering - Type SWT 325 QH - Year of construction 2015 - 1. Unit - Cross belt - Electronic sanding beam EPS - Fins belt - Sanding belt speed infinitely adjustable - 2. Unit - Length belt - Electronic sanding beam EPS - Sanding belt speed infinitely adjustable - 3. Unit - Brush sanding head Aderlohn 650mm / Messing 650mm - Operating side, left - Electric height adjustment - Feed speed infinitely adjustable - Vacuum transport belt - Air speed main collector 5500 m³/h, 20 m/s - Consumption of compressed air 80 - 108 m³/h - Weight 4.000 kg - Standort, nicht am Lager - Switch cabinet built into the machine - Total connection power 91A / 48 kW - Voltage / HZ 400/50

- Producer Bürkle - Type CASC 1400 - Year of construction 2001 - Working width 1350 mm - Working height 900 + - 20 mm - Part height ~ 5 - 100 mm - Operating side, right - Roller for putty EPDM, 240 mm - Qick changes system for roller - Metering roller 198 mm - Smoothing roller hard chromed 240 mm - Belt transport system - Length ~ 1.450 mm - Width ~ 2980 mm - Mobile, with flange of wheel - Feed speed 5 - 25 m/min - With switch cabinet - Voltage / HZ 400 / 50 - Location, on stock - Commodity code 84242000 - Voltage fluctuation max. +/- 5 %

A Borden beading machine for metal can production is available. Can diameter range: 211mm/603mm, can height range: 300mm-700mm. Documentation available. An on-site inspection is possible.

A beader, flanging and beading machine for cans by Metal Box Company is available. Can type: 3-piece cans, can shape: round, tool diameter: 150mm, max. can height: 180mm, performance range: 70-280cans/min. An on-site inspection is possible.

Glass Bottle Filling Line, 3000 bph, with Markl Bavaria Counter Pressure Filler This complete bottling line was delivered by the German manufacturer Markl Brauereimaschinen in 2015 and is still in operation. The line consists of a semi-automatic bottle off-loading system, where new bottles are lifted layer-by-layer from pallets onto the feeding table. It also includes a VELA CW 30 linear labelling machine for self-adhesive, single roll-fed labels. The filling system is a Markl Bavaria type 12/3 VKL 12 counter-pressure filler equipped with 12 filling valves, a single air pre-evacuation system with CO₂, a rotating filler, and a 3-head crown capper. The highly efficient pre-evacuation vacuum is vented directly from the center of the bottles. Pressurizing CO₂ gas is introduced at the bottom of the bottle—precisely where the beverage flows smoothly into the container. The CO₂ cush ...

AKOMAG Combi 175-18 Semi-Automatic Bottle Washer (150–500 bph) AKOMAG Combi 175-18 is a compact, semi-automatic bottle washer designed for efficient internal and external cleaning of glass beverage bottles, including wine, beer, water, and soft drinks. Ideal for small to medium production volumes, it delivers a throughput of 150–500 bottles per hour, depending on bottle size, shape, and label removal requirements. Built entirely from stainless steel, the machine features a space-saving, modular design with options for sanitization and auxiliary modules. It uses a heated NaOH water solution (up to 70 °C) with low-pressure steam to ensure thorough washing and effective label removal. Automated rinsing and washing processes are combined with manual bottle loading and unloading for operational flexibility. Engineered for low water and energy consumption, the AKOMAG Combi 175-18 o ...

Steam Boiler Plant 120 MW / 30 bar Saturated Steam This steam boiler plant is in good condition and designed to produce 54 kg/sec of saturated steam at 30 bar for industrial processes. The boiler features a membrane wall construction and is supported from the bottom. It is equipped with four burners located at the top of the boiler: two fired by natural gas and two by light fuel oil, each with a capacity of 30 MW. The firebox base and lower manifold are protected by refractory tiles. The flue gas side of the boiler operates under positive pressure. The plant includes two 100% capacity combustion air fans; there is no exhaust gas fan. The equipment has been meticulously maintained and upgraded throughout its operational life, meeting the most stringent modern quality standards. The steam boiler operates on natural water circulation, with heating surfaces arranged across two draughts ...

General SKU082Z322 MakeWerner & Pfleiderer, Stuttgart TypeUK-14 X/AU No.154 576 Year of constructionunknown LocationBarneveld Pressure Working pressure6 Bar Main Features MaterialMild steel Volume200 Ltr. Motor17.5 KW Specified Features - Z-blade mixer Jacketcheck Max. temperature220 Degr. C. Screw speed20/40 Rpm Arm speed27/20 Rpm (front/back) Capacity250 Ltr, Useful 200 Ltr Double shaft kneaderMixtruder (1x) Masticator-armscheck Trough sizes740x685mm With covercheck With screw dischargecheck Motor30,0 KW, 380 Volt Motor11,0/17,5 KW, 380 Volt Z-blade mixers MaterialMild steel Information With switchgear(Dim. 80x40x180 CM) Floorspacekneader 2,8x1,4 M Total height1,6 M Weight3200 KG Extra Specifications- Dimensions drive unit 1,4x1,0x1,7 M (LxWxH), weight 2130 KG Technical specs Extra informationtest pressure is achieved at 220 Degr. C.Z-blade mixersDis ...

General SKU244Y171 MakeRiera Nadeu Serial10590/P19/00726 Magento base g_extra_specificationsBasket dia. 800mm, Max. 2.600 Rpm, solid wall basket, contact parts in stainless steel AISI-316L / DIN1.4404, Basket wall in Duplex 2205, Max. allowable weight 125 KG according to technical documentation (manufacturer tag mentions 180 KG), motor 11,0 KW, 400/690 Volt, with control cabinet, machine weight 3.400 KG Main Features MaterialStainless steel Motor11 KW Inlet diameter22 mm Specified Features - Basket centrifuge Basket centrifugecheck Closed basketDuplex 2205 Capacity100 dm³ Basket sizesø 800 x 400 mm Max. loading weight125 kg Hydraulic operatedcheck Liquid outletDN100 With hydraulic unitHydra power Motor1,50 kW, 400 V, 1445 rpm With variable speed drivecheck Max. basket speed2600 rpm Max. temperature0° / 80 °C MaterialStainless steel 1.4404 (316L) Information  ...

General SKU255X231 MakeComi Condor TypeAL FA/1D No.1824 LocationBarneveld Main Features MaterialStainless steel Motor0.25 KW Inlet diameter45 mm Specified Features - Basket centrifuge Basket centrifugecheck Perforated basketcheck Basket sizesDia. 500x290 mm Max. loading weight35 kg Hydraulic operatedcheck Liquid outletDN110 With hydraulic unitcheck Motor0,25 kW, 380 V., 1330 rpm Max. basket speed1400 rpm MaterialStainless steel Information Mounted on foundation platecheck Mounted on wheelscheck Floorspace2,05x1,25 m Total height1,25 m Weight1200 kgBasket centrifugesNew arrivalsComi-CondorCentrifuges > Basket centrifugesNew arrivalsBrand > Comi-Condor What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, Th ...

General SKU312X492 MakeALLGAIER PROCESS TECHNOLOGY GmbH TypeWS-R-V-T-2.80-0.50-0.30 LocationBarneveld CEcheck Main Features MaterialStainless steel Motor11 KW Surface2.8 m2 Specified Features - Fluid bed dryer continuous Continuous fluidbed dryercheck Continuous operation, pressure/suction mode Product inletø 150 Product outletø 200 Number of sections:3 Air inlet2x ø 400: 2x ø 80 (warm air blending) Air outlet3x ø 250 Vibro motorcheck Motor11 kW (400 V 1475/477 rpm) With variable speed drivecheck With fancheck Motorcheck Capacity500 kg/h wet product With cyclonecheck Heating unit (oil)check (Thermal oil: Heat Exchanger) Max. temperatureApprox. 170 °C: inlet air MaterialStainless steel 1.4301 (304) Information No.380 Year of construction2013 Mounted on mild steel framecheck Floorspace3,9 x 2,25 m Total height2,9 m Extra Specifications Not suitable  ...

Overview The BLOMAX 4 blow molder was manufactured by the German company SIG Corpoplast (now KHS) in 2006. It has been overhauled by a machine builder and can be inspected in dry operation. Blow molds are not included, but can be obtained.  Technical details  Output: up to 7,200 bph 4 cavities Dimensions: 4960 mm x 3900 mm x 3000 mm  Weight: 15 t  Operating hours: 44.736  Bottles Volume: 200 ml - 2000 ml   Max. Diameter: 115 mm  Max. Length: 350 mm Preforms  Length: 60 - 200 mm Max. Support ring diameter: 35 mm  Scope of delivery  Blow molder is completely equipped with the system for preform feeding (silo, elevator, sorting, chute)

Bitzer Kühlmaschinenbau GmbH cooling compressor, type: 6J-22.2Y-40P. - Fluid tank - Oil separator - Pressure gauge set with all necessary safety devices - Fluid filter/dryer with sight glass - Control panel - Cooling capacity: 21.8 kW/6.4 tons - Refrigerant: R507 - Nominal power: 400 V - Power consumption: 13.94 kW The stated cooling capacity of 21.8 kW is based on the refrigerant R507 at -30°C / +40°C. The cooling capacity at -10°C / +40°C is 54 kW.

Biomass CHP Boiler Plant – 5.4 MW Thermal and 995 kWe Turbine Capacity A lightly operated, complete biomass CHP boiler plant featuring a 9.5 MW bubbling fluidized bed boiler (BFB), designed for wood-based fuels. The plant includes a back-pressure steam turbine and a heat exchanger for hot water production from back-pressure steam. The plant was built by Estonian Filter Solutions, a company highly experienced in steam boiler plant engineering and EPC contracting. The BFB steam boiler was delivered by Vapor Boilers Finland. The steam turbine was manufactured by Triveni Turbines (India), in combination with a generator and controls from ABB. Other key equipment includes KSB pumps, conveyors from Technobalt AS, and rotary airlock valves from Rotolok UK. The power plant was commissioned in 2013 and operated at partial load until 2015. The control system, developed by Filter Solutio ...

thre pcs. available

Technical description : 2 UNITS SCRAP CONVEYOR SYSTEMS consisting of: - First unit being approx. 35 meters length - Second unit being approx. 40 meters length - Each having a drive unit, gearbox, reversing station - Conveyor width is approx. 1100mms - Conveyor height is approx. 1200mms. Both units were professionally dismantled, cleaned and stored carefully into containers in our warehouse in D-57258 Freudenberg some 140 km north of Frankfurt International Airport

spindle diameter:130 mm spindle diameter:130 mm x-travel:2190 mm y-travel:1520 mm z-travel:1000 mm w-axis:1075 mm table surface area:2000 x 1800 mm workpiece weight max.:8000 kg spindle turning speed range:4,5 x 900 U/min spindle taper: ISO:50 faceplate turning speed range:4,5 x 180 U/min faceplate diameter:785 mm rapid traverse::5000 mm/min total power requirement:40 kW weight of the machine ca.:35 t dimensions of the machine ca.:5,5 x 6,9 x 5,2 m Machine retrofit and overhould with TNC 360 Heidenhain in 2023 and stepless spindle speeds - table indexing 4 x 90° - facing head 785 mm - exhauster - various arbors and tooling

bore capacity in steel (diameter):10 mm throat:210 mm bore stroke:80 mm total power requirement:1,1 kW weight of the machine ca.:195 kg dimensions of the machine ca.:530 x 650 x 1850 mm spindle speeds::355, 710, 1400, 2800 U/min Table dimensions:340 x 280 mm

spindle diameter:130 mm x-travel:2190 mm y-travel:1520 mm z-axis:1520 mm w-axis:1000 mm table surface area:2000 x 1800 mm workpiece weight:8 t spindle motor:18 kW spindle taper ISO:50 spindle turning speed range:4,5 - 900 U/min faceplate diameter:785 mm rapid traverse:5 m/min total power requirement:40 kW dimensions of the machine ca.:5,5 x 6,9 x 5,2 m weight of the machine ca.:35 t Machine was retrofitted in 2023 with HEIDENHAIN TNC 360 CNC control - inf. variable spindle spped - 4 x 90° table positioning - diverse toolholders - dDust exhauster

General SKU363X853 MakeHosokawa Alpine LocationBarneveld CEcheck TypePulvis PV450 Main Features MaterialStainless steel Volume25 Ltr. Motor11 KW Specified Features - Ball mill Grindercheck (Agitated ball mill (dry grinding)) Ball mills Continuous ball millcheck Capacity25 l Drum sizesø 485 mm InletDN100 OutletDN100 With jacketcheck Motor11 kW Speed300 rpm With ballscheck Capacity25 l. Housing dimensions ø 485 mm InletDN100 With jacketcheck Motor11 kW Rotor speed300 rpm With ballscheck MaterialStainless steel 1.4301 (304) Information No.M3 239783 Year of construction2016 Mounted on framecheck With switchgearcheck (as is) Extra SpecificationsHosokawa Alpine Pulvis PV450 with Hosokawa Alpine ATP 140Dry agitated media mill for the production of ultrafine powders. The dry agitated bead mill is equipped with an integrated dynamic air classifier. Capacity:  ...

General SKU215X1347 MakeThermo Electron Industries (France) LocationBarneveld CEcheck TypeKR 4i Main Features MaterialStainless steel Inlet diameter640 mm Specified Features - Basket centrifuge Basket centrifugecheck (refrigerated centrifuge) Closed basketcheck Capacity± 4 Ltr. Basket sizesø 640 x 300 mm Manual operatedcheck (Lid locking is motorized, operation electronic) With variable speed drivecheck (electronic control) Max. basket speed500 - 4900 rpm (39.3 kg at 4900 rpm) Max. temperature+40 °C (chamber cooling range −8 °C – +40 °C) MaterialStainless steel 1.4306 (304L) Information No.30311114 Year of construction2005 Floorspace0,8 x 0,9 m Total height0,65 m Weight450 kg Extra Specifications Refrigerated centrifuge with compressor system using R404A (1.5 kg refrigerant) Max sample density: 1.2 g/cm³Basket centrifugesBiopharmaceuticalThermo Elect ...

General SKU215X083 MakeThermo Electron Industries (France) LocationBarneveld CEcheck TypeKR 4i Main Features MaterialStainless steel Inlet diameter640 mm Specified Features - Basket centrifuge Basket centrifugecheck (refrigerated centrifuge) Closed basketcheck Capacity± 4 Ltr. Basket sizesø 640 x 300 mm Manual operatedcheck (Lid locking is motorized, operation electronic) With variable speed drivecheck (electronic control) Max. basket speed500 - 4900 rpm (39.3 kg at 4900 rpm) Max. temperature+40 °C (chamber cooling range −8 °C – +40 °C) MaterialStainless steel 1.4306 (304L) Information No.41504620 Year of construction2013 Floorspace0,8 x 0,9 m Total height0,65 m Weight450 kg Extra Specifications Refrigerated centrifuge with compressor system using R404A (1.5 kg refrigerant) Max sample density: 1.2 g/cm³ Chamber diameter: 640 mm without basketsBaske ...

General SKU215X081 MakeThermoFisher LocationBarneveld CEcheck TypeSorvall Bios 16 Main Features MaterialStainless steel Inlet diameter400 mm Specified Features - Basket centrifuge Basket centrifugecheck (Refrigerated high-speed laboratory centrifuge) Closed basketcheck Basket sizesø 400 x 150 mm Max. loading weight4–6 kg per rotor Liquid outletcheck (Drain hose / condensation outlet) With variable speed drivecheck (electronic speed control) Max. basket speed15 200 rpm With jacketcheck Max. temperature-10 / 40 °C MaterialStainless steel 1.4301 (304) Information No.42241403 Year of construction2018 With switchgearcheck Floorspace0,82 x 0,90 m Total height1,0 m Weight450 kg Extra Specifications Refrigerated centrifuge with compressor system using R404A Max sample density: 1.2 g/cm³Basket centrifugesBiopharmaceuticalThermofischerCentrifuges > Basket centrif ...

General SKU215X080 MakeThermo Electron Industries (France) LocationBarneveld CEcheck TypeKR 4i Main Features MaterialStainless steel Inlet diameter640 mm Specified Features - Basket centrifuge Basket centrifugecheck (refrigerated centrifuge) Closed basketcheck Capacity± 4 Ltr. Basket sizesø 640 x 300 mm Manual operatedcheck (Lid locking is motorized, operation electronic) Liquid outletcheck With variable speed drivecheck (electronic control) Max. basket speed500 - 4900 rpm (39.3 kg at 4900 rpm) Max. temperature+40 °C (chamber cooling range −8 °C – +40 °C) MaterialStainless steel 1.4306 (304L) Information No.305100016 Year of construction2005 Mounted on framecheck Mounted on wheelscheck Floorspace0,8 x 0,9 m Total height0,65 m Weight450 kg Extra Specifications Refrigerated centrifuge with compressor system using R404A (1.5 kg refrigerant) Max sample ...

General SKU033H111 MakeDinnissen Machinefabriek B.V. Sevenum No.1970 Year of construction1976 Mounted on framecheck Main Features MaterialStainless steel Volume2000 Ltr. Motor7.5 KW Specified Features - Ribbon blender MaterialStainless steel 1.4301 (304) Ribbon blender(1x) Capacity2000 Ltr. Trough sizesDia. 1000 x 2500mm With covercheck Inlet740x200mm + Dia. 125mm + Dia. 600mm Manholecheck inspection hatch 500x470mm (3x) OutletDia. 140mm With adjustable packing glandscheck Motor7,5 KW, 380 Volt (Ex) Speed mixing shaft± 26 Rpm Information LocationBarneveld With switchcheck Floor space1,7 x 3 m Total height2,3 m Weight2500 kg ATEX compatiblecheck Extra Specifications- Bag dump cabinet with lump breaker on top Ribbon blendersDiscountDinnissenMixers > Ribbon blendersDiscountBrand > Dinnissen What you can expect from Foeth: -- Machine is in working condition --  ...

UNOX CHEFTOP MIND.Maps PLUS COMBI OVENS GN 2/1 – Model XEVL-2021-YPRS with 3 rack trolleys and underframes, Used professional combi steamer from UNOX in large BIG-size version for GN 2/1 trays. The unit is ideally suited for large kitchens, catering, cook-and-chill applications, community catering, production kitchens, bakeries as well as convenience and food production., The machine has a capacity of 20 × GN 2/1 and enables baking, cooking, steaming, regenerating, low-temperature cooking, as well as combi-steaming in a single system. Through the MIND.Maps PLUS control, cooking processes can be programmed and saved individually., Included in the scope of delivery:, - UNOX CHEFTOP MIND.Maps PLUS BIG combi-steamer, - 3 x suitable trolleys 20/1 GN, - 3 x mobile stainless steel low frame / slide-in racks, - 60 sheets for the tote carts, The plant/system was, according to the documents, wi ...

Overview This blowmoulder, filler and capper combiblock was manufactured by ACMI (Italy). The machine can be operated fully floor level and is a very good solution offering the advantage of a dual-cavity design (one mold = two bottles up to 70mm diameter) achieving an up to 17% reduced footprint vs equivalent output from traditional single-cavity equipment, improving production line accessibility. The increased output on smaller formats allows better utilisation of downstream equipment in the production line, resulting in improved ROI of total investment (100% additional output on smaller formats with less than 36% additional CAPEX). The BLO2FILL ESF 12/120/20 is designed for the production of PET bottles and subsequent filling and capping in a single integrated system. The machine is suitable for carbonated water, still water and carbonated soft drinks.  Technical data Capacity: u ...

CONTROLS   CNC controls NUM 1060 WORKING RANGE TURNING   swing diameter (max): 2000 mm   workpiece weight max.: 25000 kg CROSS BEAM SLIDE   - rotation speeds (min): 2 /min   - rotation speeds (max): 450 /min ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 4100 mm   space requirements -front/back-: 3500 mm   total height: 5600 mm

Jungheinrich charging station for industrial trucks Industrial Charging Station, Battery Maintenance Stand If you use electric industrial trucks in your business, they rely on accumulators or batteries as an energy source. With the installation of a battery charging station, you benefit from a compact solution that significantly simplifies the charging of batteries. The system serves as a charging station for industrial trucks (such as forklifts). It has three charging stations with Tecna spring balancers that hold the charging cables in place. Construction: The yellow steel structure includes a metal frame with integrated ram protection on the ground to protect the system from damage by vehicles. Spring balancers are mounted at the top, which enable ergonomic handling of heavy cables. Jungheinrich battery charging station for ground mounting Length: 4.15 m Width:  ...

Jungheinrich charging station for industrial trucks 2 x charging station, maintenance stand for battery maintenance If you use electric industrial trucks in your business, they rely on accumulators or batteries as an energy source. With the installation of a battery charging station, you benefit from a compact solution that significantly simplifies the charging of batteries. The system serves as a charging station for industrial trucks (such as forklifts). It has two charging bays with Tecna spring balancers that hold the charging cables in place. Construction: The yellow steel structure includes a metal frame with integrated ram protection on the ground to protect the system from damage by vehicles. Spring balancers are mounted at the top, which enable ergonomic handling of heavy cables. Jungheinrich battery charging station for ground mounting Year of manufacture: ...

Jungheinrich charging station for industrial trucks Industrial Charging Station, Battery Maintenance Stand If you use electric industrial trucks in your business, they rely on accumulators or batteries as an energy source. With the installation of a battery charging station, you benefit from a compact solution that significantly simplifies the charging of batteries. The system serves as a charging station for industrial trucks (such as forklifts). It has a charging station with Tecna spring balancer that keeps the charging cable in place. Construction: The yellow steel structure includes a metal frame with integrated ram protection on the ground to protect the system from damage by vehicles. Spring balancer for ergonomic handling of heavy cables. Jungheinrich battery charging station for ground mounting Year of manufacture: 2023 Without charger "Everything fro ...

Jungheinrich charging station for industrial trucks 4 x charging station, maintenance stand for battery maintenance If you use electric industrial trucks in your business, they rely on accumulators or batteries as an energy source. With the installation of a battery charging station, you benefit from a compact solution that significantly simplifies the charging of batteries. The system serves as a charging station for industrial trucks (such as forklifts). It has four charging stations with Tecna spring balancers that hold the charging cables in place. Construction: The yellow steel structure includes a metal frame with integrated ram protection on the ground to protect the system from damage by vehicles. Spring balancers are mounted at the top, which enable ergonomic handling of heavy cables. Jungheinrich battery charging station for ground mounting Year of manufac ...

BEKUM BA52 Blow Molding machine Type : BA 52 / S 801 Year: 1993 1 station Clamping force : 450 kN Original BEKUM control Extruder type : S 701 Refurbished 6-liter head with accumulator Head and screws reconstructed Max.bottle volume: 60 Litres Mold dimensions (L x W x H): 1200/750/2 x 150-300 (mm)

BEKUM BA 200 Blow Molding Extrusion Machine Type: BA 200/ S123 Year: 1990 8L Accumulator Head 1 Head and 1 Station Material Processed: PE Production Capacity: 500 kg/h Extruder Type: Accumulator Number of Extruders: 1 Screw Diameter: 120 mm L/D Ratio: 24 Thickness Control: Yes Material Feed Opening Stroke: 710 mm Clamping Force: 800 kN There are 2 machines

<br>AGFA APIS-Board Rev. A5. For AccuSet 800 / 1000 and Avantra 25<br><br><br>br>Verf Gbar: now

<br>AGFA APIS-Board Rev. B2. For all AccuSets (800/1000/1500 normal & plus) and all Avantras (20/25/30/36/44-E/S/XT)<br><br><br>br>Verf Gbar: now

<br>AGFA APIS-Board UPAC - for old and new PCs (3, 3V and 5V) - for all AccuSets (800/1000/1500 normal & plus), all Avantras (20/25/30/36/44-E/S/XT) and all Galileos (YAG/VS/Thermo)<br><br><br><br>Verf Gbar: now

R22352/11 SCHWALBACH Cross cutter Model: BS 650 Built: approx. 1995 Working width: 650 mm Fully automatic Cutting length: 4 - 1000 mm Roll diameter: 300 mm max. Material: Soft and hard foils PVC laminated fabric 0.1 - 1mm Dimensions: 1000 x 600 x 1000mm (W x D x H) Available: by arrangement

Metal detector with search coil EQA 65 x 15, No. 6.30.8941.30. Evaluation electronics EMS 21.1 and search coil display metallic foreign bodies in all non-conductive materials. Search width: 650 mm, pass height: 200 mm. Sensitivity is infinitely adjustable. With evaluation electronics in the control box.

1 office container system approx. 1,500 m2 approximately 55 containers of 20 ft each. Modules Variable room layout 3 floors office building approx. 38 x 20 meters Sanitary facilities, stairwell, connecting passageways, air conditioning Price: on request All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, etc. are approximate and are non-binding for the supplier. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange a ...

<br><br><br>Still in operation: Yes<br>Verf Gbar: Immediately

Agfa Aphis Board for new PCI. We have all Spareparts for Agfa Avantra 25/30/44, AccuSet.. on stock. Don't hasitate to contact us. Still in operation: No Available: Yes

in 2013 refurbished Still in operation: Yes Available: immediately

Lifting device standing, pneum. Fabr. Bittler T3 FT, 6 Bar, Y.O.M. 92 to 2002 Stroke 800 mm, lifting force 350 kg, adjustable forks 600 mm, safety shutdown when lowering for lifting trolleys when loading machines by hand, or when re-sorting