b tec used for sale

Semi-automatic bending, pipe bending machine, mandrel bending machine MOBITEC type BAH 1-2KOTTMANN and BERGER GmbHFabr. No. 056 Year of construction 09/2004- for simultaneous bending of two pipe sections made of steel up to 12 mmBending angle max. 90Pipe diameter max. 12mmMandrel length approx. 65 mmNominal power 3.5 kWDreturn air max. 6 bar / approx. 1 litre per bending cycleMains connection 400 volts, 50 Hz- Pneumatic clamping- Pneumatic mandrel retraction- Control for angle input via STOBER Controlbox Series 4000/5000- Control SIEMENS

NEW, 100 cm width, with Lehnhoff MS03 Symlock mount, 207 kg dead weight, suitable for 4.0 - 5.5 t excavators

Carrier bag machine / SOS block bottom bag machine with flat inside handle unit Bag width: 14-32cm Tube length: 35-70cm Bottom width: 6-20cm Reel width: 107cm max Hot Melt unit for handles Web guide system for handles Foto cell unit for preprinted paper Aprox 7 former plates Option: 4 colour tail end printer (ref. S294)

New BIG BAG filling station The device is available immediately from stock. Technical data: -Weight: 320 kg -up to 1.5 qbm big bags can be used. -Foldable feet -With EXTRA large funnel to the trucks/excavators filling -Dimensions: 1520 x 1640 (L x W) mm Retracted height feet: 2560 mm Extended height feet: 3060 mm -Hopper opening: 1400 x 1100 mm Technical data sheet, see the images on offer.

Castle box tipping for boxes up to 12001200800

The BTS drum press PLC auto is ideal for compressing 30 to 220 litre steel drums, but it can also be used to compress plastic and cardboard drums very easily. In many cases this compressed recyclable material can then even be remarketed. The barrel press is particularly characterized by its reliable and easy operation. By compacting these waste/recyclable materials, you achieve a volume reduction of up to 90%, save significantly on your disposal costs and properly return the material to the recyclable material cycle. Pressing force: 24 tons Machine dimensions: 2587 H x 1190 W x 1000 D mm Machine weight: 690 kg Transport height: 1800 mm Compression: 8:1 Pressing time: 40 seconds Motor: 11 kW 32 Amp Power supply: 380 - 400 V (3 phases) Noise: 68 dB PLC control with automatic pressing cycle 30 litre drip pan with drain tap Pressing punch with mandrels for pi ...

Quick Snap brush segment, brush, plastic brush -Outer diameter: Ø 105 mm -Outer segment: Ø 86 mm -Reach: 60 mm -Number of teeth: 20 teeth -Width: approx. 105 mm Price: per piece -Number: 44 available -Weight: 0.35 kg/piece

Balancer, Weight Balancer, Spring Balancer BOSCH 0 607 950 920 092 109 Payload: 0.3 - 1.2 kg Extension: 1100 mm used, tested ! Dimensions: 180 x 100 x 70 mm

Control Card / Plug-in Circuit / PCB Board for Bobst Alpina 110 II matic. Control card / plug-in circuit / PCB board for Bobst Alpina 110 II matic. BSA0701239601

Blobel Spill Barrier can be rotated on one side The ideal solution if you want to secure the area of a lifting platform or dock leveller. The barrier is stationary and can be rotated on one side, easy to handle, versatile and flexibly convertible from manual to automatic. The rotating and clamping device is permanently mounted next to the opening to be secured and sealed against the structure. The locking body is screwed into the swivel joint and stands vertically next to the opening in the resting position. It is secured against unintentional folding down in accordance with the UVV. In the event of an emergency, the fuse is unlocked, the leak lock is folded down and locked in the clamping device. The contact pressure of the clamping lever is adjustable, ensuring a secure seal. In the basic version, the barrier body is folded down manually, and an automatic system can be ...

Brush deburring machine, tube deburring machine BAUER type BE 1Masch. No. 29-0520 Year of construction 1992Brush diameter 250 mmBrush width 25 - 55 mmSpeed 1500 / 3000 rpm. Power 2.2 / 3 kWNerg connection 380 Volt, 50 Hz- Material supportSpace requirement L x W x H 500 x 450 x 440 mmWeight 45 kgGood condition; used

Brush deburring machine, tube deburring machine BAUER type BE 1Masch. No. 05-72025 Year of construction 2005Brush diameter 250 mmBrush width 25 - 60 mmSpeed 1500 / 3000 rpm. Power 2.2 / 3 kWNetz connection 380 Volt, 50 Hz- Material support- new deburring brushSpace requirement L x W x H 550 x 450 x 440 mmWeight 65 kgGood condition; used

The scope of delivery includes: 01x Open fronted storage boxes, used Manufacturer: Bito External dimensions: 600 x 400 x 170 mm Interior dimensions: 560 x 360 x 167 mm Opening dimensions: open on one side at the front, 275 x 82 mm (WxH) Handle: yes, single-sided, open Colour: blue Weight | Piece: 1.59 kg General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

NEW, 80 cm width, with Martin M03 mount, 125 kg dead weight, suitable for 2.8 - 3.9 t excavators

NEW, 140 cm wide, with Martin M10 mount, 123 kg net weight, suitable for 5.6 - 9.0 t excavators

NEW, 80 cm width, with Martin M03 mount, 125 kg dead weight, suitable for 2.8 - 3.9 t excavators

NEW, 140 cm wide, with Martin M10 mount, 123 kg net weight, suitable for 5.6 - 9.0 t excavators

NEW, 120 cm wide, with Lehnhoff MS01 Symlock mount, 73 kg net weight, suitable for 1.9 - 2.7 t excavators

Used slope bucket / ditch cleaning bucket, Working width: 100cm, with Lehnhoff MS01 recording

Rotor brake, disc brake, electro-hydraulic disc brake, crane brake, disc, drum and storm brakes, overhead crane brake -Manufacturer: Pintsch Bubenzer, rotor brake disc brake unused -Type: SB 23-450x30-80/6 -Braking torque: 1850 Nm -Accessories: incl. 3 sets of replacement burners -Quantity: 2 pieces brake available -Price: per piece -Dimensions: 370/330/H650 mm -Total weight: 105.7 kg/pc.

Conveyor belt, belt conveyor, metal conveyor belt, wire belt, link belt, round wire link belt, wire eyelet link belt, wire eyelet link belt -Manufacturer: Costacurta, Conveyor belt round wire link belt stainless steel 2 rollers -Type: VICO FLEX-127-274-14-SF -Material: AISI 304 -Width: 457 mm -Length: 10 m / 17.56 m -Height: 35 mm -Submission/Price: complete -Transport dimensions: 1200/800/H740 mm -Total weight: 113 kg

Conveyor belt, belt conveyor, metal conveyor belt, wire belt, link belt, round wire link belt, wire eyelet link belt, wire eyelet link belt -Manufacturer: Costacurta, Conveyor belt round wire link belt stainless steel -Type: VICO FLEX -Width: 455 mm -Length: 9700 mm -Number: 3 rolls available -Price/Distribution: per roll -Transport dimensions: 600/370/H370 mm -Weight: 62 kg/unit

Conveyor belt, belt conveyor, metal conveyor belt, wire belt, link belt, round wire link belt, wire eyelet link belt, wire eyelet link belt -Manufacturer: Costacurta, Conveyor belt round wire link belt stainless steel 1 roll -Type: VICO FLEX -Width: 457 mm -Length: 18.29 m -Height: 35 mm -Submission/Price: complete -Transport dimensions: 800/457/H630 mm -Weight: 75 kg

Conveyor belt, belt conveyor, metal conveyor belt, wire belt, link belt, round wire link belt, wire eyelet link belt, wire eyelet link belt -Manufacturer: Costacurta, Conveyor belt round wire link belt stainless steel 4 rollers -Type: VICO FLEX -Width: 460 mm -Length: 10 m / 8.170 m / 8.830 m / 10.5 m -Height: 35 mm -Submission/Price: complete -Transport dimensions: -Total weight: 225 kg

Conveyor belt, belt conveyor, metal conveyor belt, wire belt, link belt, round wire link belt, wire eyelet link belt, wire eyelet link belt -Manufacturer: Costacurta, Conveyor belt round wire link belt stainless steel 3 rollers -Type: VICO FLEX -Width: 455 mm -Length: 5 m / 8.930 m / 12.860 m -Height: 10 mm -Submission/Price: complete -Transport dimensions: 1200/800/H420 mm -Total weight: 150 kg

Conveyor belt, belt conveyor, metal conveyor belt, wire belt, link belt, round wire link belt, wire eyelet link belt, wire eyelet link belt -Manufacturer: Costacurta, Conveyor belt round wire link belt stainless steel 3 rollers -Type: VICO FLEX -Width: 1065 mm -Length: 25 m / 16.62 m / 25.14 m, Weight: 370 kg / 246 kg / 372 kg -Height: 15 mm -Submission/Price: complete -Transport dimensions: 2350/1265/H940 mm -Total weight: 1100 kg

SML heavy-duty dump bucket 240cm with JCB Q-Fit mounting, - Net weight: approx. 443 kg, - Volume: 1.56 m3

Bag filter for bag type #2Material: stainless steel type 304Pressure: 8 bar

Beutelfilter f?r Beutel Typ #2 Material: Edelstahl Typ 304 Druck: 8 Bar

Bag filter for bag type #2 Material: Stainless steel type 304 Pressure: 8 bar

<br>SOS block bottom bag machine TRIUMPH III, Windm Ller + H Lscher, with lower patch unit, 2-ply, photocell, several former plates and aisle, option: 4-color printer for final cleaning<br><br>br>

Composite plant Fabrikat Linde,with 3 pcs.Bitzer compressor type.4EC 4.2Y 22.7m3/h. 40Kw.at minus 10 degrees evaporation temperature.

Hand spindle press, used Balancier, used Type: PSHZ 25/I Pressing force / rated pressure: 25 t Stroke/ stroke: 250 mm Table size/ table size: 400x 500 mm Stössel/ ram: 200 x 500 mm Table opening / hole in table: 140 mm Weight: 0.9t

Technical data: Machine stand, Type 539 Band saw roll diameter 1400 mm Band saw roll width 180 mm Saw blade width max. 200 mm Saw blade length max. 9300 mm Saw blade thickness 1.3 mm Saw blade speed approx. 42 m/sec. Drive power 45 kW, (1500rpm) Cutting feed requires. 22.5 m/min -Incl. electrical equipment, consisting of limit switches for saw blade voltage, path limitation for transverse movement -2 electromechanical width adjustment devices with precision spindle and two-stage special drive - designed for connecting a Fraba digitizer 2800 -2 hydro-pneumatic band saw roller brakes

CAP.: 10 000 BTLS/H OF 1.5 L,

Motor in exchange DEUTZ Type= BF4M1013E in KHD-AT scope of delivery with warranty immediately available from stock. info@miw-zeven.de

Timing belt+clamping roller DEUTZ BF4L1011 (=OE 02929933) Net= 67,- Timing belt+clamping roller DEUTZ BF4L2011 (=OE 02931480) Net= 151,- Timing belt F/BF3-4M1008 Net= 50,- Clamping roller F/BF3-4M1008 Net= 76,- all price plus Shipping+VAT info@miw-zeven.de

Saw blade width: max. 110 mm Roll diameter: 1100 mm passage height 600 mm Opening width: 200 mm Number of feed rollers: 4 roll Adjustment: pneumatic Main engine: 22 kW Infeeding seed: max. 40 m / min,

Zylinderkopf im Austausch DEUTZ BF4M2012/C komplett überholt mit Ventilen. sofort ab Lager lieferbar info@miw-zeven.de

automatic CUTTING BORING and MOULDING machine BACCI TTF1 2TM . second hand machine working conditions : Excellent hydraulic drive of all the movements volt. 380/50 CE mark : YES Machine suitable for assembling part of chairs, tables, frames, furniture, wheelchair frames, etc. The BACCI TTF1 2TM performs the operations of cutting , milling and drilling at the end of the piece, either singularly or differently combined . the milling unit is composed of n.02 spindle moulders ( anti-splinter system ) machine composed by 3 working units : 1- Cutting unit : circular saw max.diam. mm.400 motor power Hp 3 2- Boring unit : boring head with 5 mandrins motor power Hp 3 3- Moulding unit . with automatic movement of the carriage on recirculating ball bearings n.02 spindle moulders (anti-splinter) motor power Hp 7,5 spindle diam. mm.35 hydraulic unit motor power Hp 2

FORMAT: 1 DF-20 DF, 26 MIL. NF PER ANNUM, FORMING, MOULD TRANSPORT, DRIER TRANSPORT, DRIER, SETTING DEVICE, KILN ETC.

Cylinder head new with valves mounted . We have a lot of recon engines at stock now.Please contact us... MIW GmbH Nord-West-Ring 8 D-27404 Zeven/Germany info@miw-zeven

We produce stone forecastle records (cooker-flat) Bakeplates for everything type from ovens: -MIWE -WP merchant quail -Debag -Sveba Dahlen -Daub -Heuft and other proficient ones. also stoves for pizza and fur ordered in another dimension (length, width, thickness) ... our panels a perfectly smooth surface are marked, are resistant to mechanical pushes, do not carry during the use, a very long life span. users praise good baking quality.

SAW CARRIAGE DISTANCE: 610-710 MM, RANGE OF CUTTING: HEIGHT: 200 MM, WIDTH: 200 MM, DRILL DIA.: 12 - 40 MM; STROKE: 630 MM;

pneumatic Bale cutter max. Width 550 mm max. Length 800 mm Blade stroke 280 mm

Data processing!

THROW BAND / SPIN / BELT / DIRECT FROM THE MANUFACTURER! -Stable original cast band / belt / conveyor belt made of rubber, specially designed for baling presses (original quality) or many other applications in industry, agriculture, wood u.v.m.! -New, open reinforced, with mounted hook connectors in stainless steel, 2-ply top Supergrip profile, black, running side out fabric -suitable for CLAAS, Stockey & Schmitz and Welger P22/P23 -Name: EP 3-0 250/2, ceiling -Dimensions: length 2,040 mm x width 300 mm Shipping will be by UPS! On request, we can customize the conveyors / conveyor belts to your individual measurements. (All lengths and widths possible) Endless connection on request. Additional versions, with pimples, Stollen or structured surfaces available. More transport and conveyor belts in all other sizes available immediately . We ship worldwide we deliver worldwide, pl ...

FOOD CONVEYOR BELT, CONVEYOR BELT DIRECTLY FROM THE MANUFACTURER! BELTech GmbH in Lüdenscheid manufactures all dimensions and qualities according to your specifications. Premium quality for agriculture and industry. -one side coated underside of fabric with additional wedge bar, (11 mm wide x 8 mm high) in the Middle -endless -Food safe, white -Dimensions: 5,100 mm x 300 mm width x thickness length approx. 1.2 mm, surface with tunnels. -Tunnel approx. 20 mm in height, distance approx. 300 mm, tunnel length 245 mm, studs tip inclined (see photo) On request we can cut the belt conveyors / conveyor belts to your individual measurements. (All lengths and widths possible)