b tec used for sale

Description Technotrans TBP 300-36-12 paint pumps with signalling panel 4 x 300 kg from 2010 Ratio 16:1 Compressed air 7.5 bar required

Description This sensational, versatile tool with a diameter of 35 mm solves your cutting and micro-perforation problems in one fell swoop. Only one tool for micro-perforation, cut-off, cut-out, edge trimming and scribing.

Description Techno-Grafica Diamand TPP 1550 HS Printing Plate Developing Machine with Two Brush Rollers for Kodak Trillian SP from 2016 with Various Replacement Brushes and Rollers

Description Technotrans alpha.c Dampening solution and coolant pump module for central water cooling on small and medium-format printing presses Benefits – Cooling air flow from front to top

turning diameter over bed: 400 mm turning diameter over slide rest: 260 mm turning length: 1500 mm turning diameter in the gap: 570 mm turning speeds: 45 - 1800 U/min centre height: 210 mm spindle bore: 52 mm tailstock quill taper MT: 4 MK connected load frequency: 400 V total power requirement: 3,5 kW weight of the machine ca.: 1,5 t dimensions of the machine ca.: 2,6 x 1,1 x 1,7 m Professional industrial machine digital display 3-jaw chuck 200 mm. 4-jaw chuck 200 mm. Faceplate 280mm Bezel fixed Bezel rotating Multifix steel holder. Machine light Foot brake removable chip tray, chip protection wall Hardened and ground bed rails Complete coolant system Feed protection Machine feet Machine tool The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 3-axis SCM TECH Z25 PLUS H-R4 was manufactured in 2005. It features a working area of 2500 x 1000 mm and a travel range of 2980 mm on the X-axis, 1280 mm on the Y-axis, and 200 mm on the Z-axis. The machine is equipped with 16 spindles operating at 4000 rpm and an electric spindle with a maximum speed of 18,000 rpm. If you are looking to get high-quality CNC processing capabilities, consider the SCM TECH Z25 PLUS H-R4 machine we have for sale. Contact us for further details.

A Polo slant bed filter with vacuum filter endless belt design and enlarged storage tank is available. Capacity: 5000l, max. operating temperature: 60°C, flow rate per minute emulsion/oils: 650l/200l, dirt chamber capacity: approx. 400l, vacuum chamber capacity: approx. 140l, connected load: 5kW. Filter unit dimensions X/Y/Z: approx. 2450mm/1650mm/1550mm, filter unit weight: approx. 1150kg, total weight: approx. 3000kg. Documentation available. An on-site inspection is possible.

Inv. Num. : 9102 Type: Hi-TECH 230 BL YMC Producer: Hwacheon Created: 2019 Parameters: Control system: FANUC Hours: 6623 h Maximum turning length: 584 mm Maximum turning diameter: 400 mm Maximum turning diameter over bed: 750 mm Maximum spindle speed: 3500 1/min Weight: 6650 kg

This 5-axis CHARMILLES TECHNOLOGIES Robofil 290P was manufactured in 1999. It features a travel range of 400 mm x 250 mm x 200 mm and can accommodate a maximum workpiece weight of 500 kg with dimensions of approximately 850 x 500 x 200 mm. If you are looking to get high-quality wire EDM capabilities, consider the CHARMILLES TECHNOLOGIES Robofil 290P machine we have for sale. Contact us for further details.

Clipping machine Manufacturer: Technopack Tipper Tie Made of stainless steel and durable industrial plastic Easy to clean thanks to smooth surfaces Machine dimensions: Width: 100 cm Depth: 78 cm Height: 180 cm Power: 0.1 kW Voltage: 2.5 A Compressed air: 4–6 bar / 0.4–0.6 MPa

Throughfeed case clamp Make: ERREGI Type: Tecnopress VR2/2 New machine Fast - Silent - Clean - Lean - Universal - Service by Wehrmann Technical data:  Self-positioning thru-feed carcase press The load bearing structure of the machine consists of a double portal in welded tubular steel, inside of which the two mobile heads and the presser table run. -The presser table and the mobile head are driven by motors. - Each of the mobile head and fixed is fitted with three horizontal pressure beams with programmable positioning moved vertically by an electro mechanical system. - The belt system is positioned on either side of the machine to allow the carcase to be clamped equally well, whether is his depth. -The carcase transfer system is located at the bottom of the bed and consists of an electro-welded steel structure on which a closed loop belt rolls ...

KOCH TECHNIC Feeder/Doser/Mixer Set 1 Pallet Type : TM 6D Year: 1995 Dimensions (L x W x H) : 1,20m x 0,90m x 0,50m Weight : 100 kg

This complete cable recycling plant has a capacity of 1000 kg/h and is designed for the granulation and separation of electric cables, recovering both copper and plastic materials. Complete Line Components - Pre-shredder: Tecnoecology TG 1250, 55 kW - Blade mill 600 mm: Tecnoecology, 37 kW - Zig-zag separation plant: Tecnoecology - Cell mill: Tecnoecology T25/45, 55 kW - Separation table: Tecnoecology TV 500 - Vibratory screen 600 mm for separation of ground plastic and fine copper - Separation table: Tecnoecology 300 for fine copper recovery - Dust filter: 72-sleeve type - Pneumatic transport fans - General electrical control panel Find more here - / Contact us at -

consisting of: Rinser 15 Nozzles Vacuum filler 16 Filling valves Screw capper 3 heads 22 mm screw cap

Material: Stainless steel 1.4301 Drive: 5.5 KW Weight: 2050 kg Screening area per deck: 3.65 m² 2 x ball head cleaning 2 x sieve insert with mesh size of your choice: 0.1 - 5mm

TECHNICA ZSM 5100 center grinder for long shafts max L = 1000 Centering bore diameter 3 - 60 mm, workpiece clamping range 4 - 220 mm, workpiece length 50 - 1000 mm, workpiece weight max. 120 kg, centering bore angle 60°, grinding head adjustement max. 160 mm, grinding spindle speed 10000 - 45000 rpm, dressing stroke of the grinding disc dressing unit max. 40 mm Machine under power in our warehouse Mimu Machine Tools Gussago BS Italy

PowerHeater PH100-1, Capacity: 150 - 240 kg/h, Steam: 50 - 100 kg/h, 10 Bar, Compressed air: 6 - 8 Bar, 50 Nl/min, Water: 16 Bar, 1500 l/h, Power: 3 x 400V, 50Hz, 1.5kW, Dimensions: 3000 x 1400 x 1800 xmm, Weight: 850 kg, Klovborg slab-outlet conveyor, Serial number: 220188-2, Power: 230VAC, 50Hz, 1Ph, Dimensions: 1250 x 500 x 1450 mm, Weight: 65 kg, Source Technology screw trolley (2 pc.), Serial number: 65800-41-110562 / 66400-33-110562, Working load: 250 kg, Dimensions: 1500 x 1400 x 1950 mm, Weight: 100 kg, With Kito CX003 manual hoist

Cooking piece, cream cooker Floor-standing unit approx. 100 capacity Stainless steel version with agitator with boiler tilting device double-walled, with thermal oil/electric heater Heating 85°C

Tecnomax Formula SP2 thickness gauge Working width 630mm Working height 300mm Electric lifting and lowering of the worktop 4-blade shaft Traditional knives 4 feed speeds 5/8/12/18m/min Sinikg main with a power of 5.5kw Extraction port fi150 Net price

CHARMILLES TECHNOLOGIES ROBOFORM 50 Control: Charmilles CNC control (Mark series, graphical interface) Table / Working Area: Table size: approx. 500 x 400 mm Max. workpiece weight: approx. 500 kg Automation equipment: Erowa ITS rotary changer (carousel, approx. 16–24 positions) Automatic electrode changing Prepared for unattended operatio Dielectric tank with filter system Charmilles generator Control panel with screen and keyboard Handheld control device / Clamping system

CHARMILLES TECHNOLOGIES ROBOFIL 510 with Charmilles control system. Travel paths X/Y/Z: 500 x 350 x 400 mm. Equipped with Erowa chuck, Erowa ITS rotary changer (24-fold), ManoSet XL, and a comprehensive clamping package. Includes additional flushing, water/water heat exchanger, and water cooling unit. Documentation available. Used, functional. Connection 3~ / 400 V / 50 Hz, power 10 kVA, current 15 A. Automatic wire tensioning, precise wire guidance, stable construction. Control console (Siemens), protective devices, emergency stop.

Working area: X 5200 x Y 1260 mm Heading of main spindle: X 5709 mm, Y 1650 mm 8 workpiece consoles Equipment: Drilling unit with 18 spindles, 12 vertical sp?ndles, 6 horizontal spindles (4 in direction X , 2 in direction Y ) Grooving saw Milling motor 11 kW, 20000 rpm max, HSK-F 63 take-up, liquid-cooled, 5-axis controlled Tool changer with 16 positions Laterally positioned changer with 8 positions PC control

Key data: 800 kN

Engel Victory 500/80 Tech / Production line with the Engel Viper 12 robot Year of Make: 2011 Injection unit: Screw diameter: 45 mm Injection weight: approx. 295 g Spray pressure: 1598 bar Dosing volume: 318 ccm Clamping unit: Clamping force: 80 t Spar spacing: 0x0 mm Size of the clamping plates: 670x600 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 200 - touch screen Additional equipment: Tie-bar-less machine Euromap 67 Robot interface Hydraulic core pull x 3 Hardened injection unit - Bimetal Robot Angel Viper 12 Year of Make: 2014 5-axis robot: 4 axes are driven by servo motors (electric); Axis A - pneumatic Touch control panel Robot with adapter and protective housing with part separator Purchase of the robot at an additional cost Dimensions: Weight: 5300 kg Length/Width/Height: 4.57x1.48x2.38 m Drive: Pumps/motor: 15 kW All off ...

Key data: 1100 kN

Engel Victory 330/110 Tech / Production line with the Engel ER-HLI 41 robot and conveyor belt / machine in very good technical condition Year of Make: 2004 Injection unit: Screw diameter: 40 mm Injection weight: 190 g Spray pressure: 1670 bar Dosing volume: 201 cc Clamping unit: Clamping force: 110 t Spar spacing: 0x0 mm Size of the clamping plates: 790x680 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 100 Additional equipment: Production line with integrated Engel ER-HLI 41 robot and conveyor belt Tie-bar-less machine Hydraulic core pull x 1 Hardened injection unit - Bimetal Machine has been serviced by the authorized service Engel Machine with original protective housing for robot and conveyor belt Dimensions: Weight: 7400 kg Length/Width/Height: 5.10x1.50x2.10 m Drive: Pumps/motor: 18.5 kW Heating capacity: 9.2 kW Total power: 27.7 k ...

Key data: 2600 kN

Engel Victory 2460/260 Tech Ecodrive with the Engel Viper 20 robot / Hybrid machine / Operating hours: approx. 10,000 h in automatic mode Year of Make: 2021 Injection unit: Screw diameter: 70 mm Injection weight: approx. 1100 g Spray pressure: 2000 bar Dosing volume: 1212 ccm Clamping unit: Clamping force: 260 t Spar spacing: 0x0 mm Size of the mounting plates: 1100x1000 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 300 - touch screen Additional equipment: Production line with the Engel Viper 20 robot Machine in perfect technical condition Tie-bar-less, hybrid machine: energy-saving and very quiet Operating hours: approx. 10,000 in automatic mode Air Valve x 5 Hydraulic core pull x 2 on the side of the movable clamping plate Hydraulic core pull x 2 on the side of the fixed clamping plate Injection unit is wear-resistant and resistant to corrosio ...

Key data: 2600 kN

Engel Victory 1350/260 Tech Ecodrive with the Engel Viper 20 robot / hybrid machine Year of Make: 2011 Injection unit: Screw diameter: 55 mm Injection weight: approx. 590 g Spray pressure: 2183 bar Dosing volume: 618 ccm Clamping unit: Clamping force: 260 t Spar spacing: 0x0 mm Size of the mounting plates: 1100x1000 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 200 - touch screen Additional equipment: Production line with the Engel Viper 20 robot Machine in very good technical condition Tie-bar-less, hybrid machine: energy-saving and very quiet Air valve x 8 on the side of the fixed clamping plate Hydraulic core pull x 2 on the side of the fixed clamping plate Hydraulic core pull x 2 on the side of the movable clamping plate Control with hot runners x 18 Injection unit is wear-resistant and resistant to corrosion Main motor of the machine - Ser ...

Key data: 3000 kN

Engel Victory 1560/300 Tech Ecodrive with the Engel Viper 20 robot / Hybrid machine / Operating hours: approx. 6,000 h in automatic mode Year of Make: 2017 Injection unit: Screw diameter: 60 mm Injection weight: approx. 690 g Spray pressure: 2200 bar Dosing volume: 763 ccm Clamping unit: Clamping force: 300 t Spar spacing: 0x0 mm Size of the mounting plates: 1100x1000 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 300 - touch screen Additional equipment: Production line with the Engel Viper 20 robot Machine in very good technical condition Operating hours: approx. 6,000 h in automatic mode Tie-bar-less, hybrid machine: energy-saving and very quiet Air Valve x 3 Hydraulic core pull x 2 on the side of the movable clamping plate Control with hot runners x 9 Injection unit is wear-resistant and resistant to corrosion Main motor of the machine - Serv ...

Key data: 3000 kN

Engel Victory 1350/300 Tech Ecodrive with the Sepro Industrial Robot SDR 22S robot / Hybrid machine / Operating hours: approx. 18,000 h in automatic mode Year of Make: 2012 Injection unit: Screw diameter: 60 mm Injection weight: approx. 670 g Spray pressure: 1835 bar Dosing volume: 735 ccm Clamping unit: Clamping force: 300 t Spar spacing: 0x0 mm Size of the clamping plates: 1200x1000 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 200 - touch screen Additional equipment: Production line with the Sepro Industrial Robot SDR 22S robot Machine in very good technical condition Operating hours: approx. 18,000 h in automatic mode Tie-bar-less, hybrid machine: energy-saving and very quiet Hydraulic core pull x 2 Control with hot runners x 12 Injection unit is wear-resistant and resistant to corrosion Main motor of the machine - Servo motor driven by inve ...

General SKUR1336 LocationBarneveld CEcheck MakeRudert Edelstahl Technik GmbH (D) TypeReaktor 10m3 Pressure Working pressure2 Bar Vacuum possiblecheck Working pressure jacket6 Bar Main Features MaterialStainless steel Volume10000 Ltr. Motor37 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity10000 ltr. Vessel sizesdia. 2400x3500mm Dished bottomcheck Dished top sidecheck Manholedia 600 Top connectionsDN100 (3x), DN150 (2x) DN250 (1x) OutletDN150 Half coil jacketedcheck Max. temperature170 degr. C With paddle stirrercheck Motor37 kW 230/400 Volt Speed mixing shaft80 rpm Stainless Steel Reactors MaterialStainless steel 1.4571 (316Ti) Information No.P033321 Year of construction2004 Mounted on legscheck Floorspace2,8x2,7 M Total height5,9 M Weight6000 KgCatalysts & fillersSolventsDetergent & surf.Other pharmaceuticsStainless Steel Reactor ...

General SKU231U194 MakeTecno Vibracione Venazeti TypeVVC70A 16/14 No.3117/3357/00 Year of construction2000 LocationBarneveld Main Features MaterialStainless steel Surface0.76 m2 Sizes diameter700 mm Specified Features - Vibro sieve Vibro sievecheck Sieve surface0,76 m² Number of sieve decks:2 Sieve sizesDia: 695 mm InletDia: 275 mm OutletDia: 110 mm (3x) Drive excentercheck Motor1,12 kW,380 Volt Sieve perforation5 mm and 3 mm MaterialStainless steel 1.4301 (304) Information Mounted on mild steel framecheck With switchcheck Floor space0,9x0,9m Total height1,05m Weight210kg CEcheckFeed additivesPaper & otherOther pharmaceuticsOrganicsE-waste & metalSugarAnimal feedOther feedSolid pharmaceuticsPlastic & rubberMinerals & inorganicPlastic & polymersRubberOther chemicalStarchGeneric medicinesPowdered foodsConsumer wasteVibro sievesTecno Vibracione VenazetiIndustri ...

General SKU304W587 MakeTechnoglass TypeAE160 No.8289 Year of construction1999 Mounted on legscheck Pressure Working pressure6 Bar Working pressure jacket9 Bar Vacuum possible jacketcheck Main Features MaterialGlass Volume160 Ltr. Motor1.5 KW Specified Features - Glass-lined Reactor Reactorcheck Capacity216 l, (160 l) Vessel sizesDia. 800x600 mm ManholeDN 700 Top connectionscheck Outlet check (top discharge by vacuum/ pressure) With jacketcheck Max. temperature200°C With propellor stirrercheck Motor1,5 kW, (400 V, 1460 rpm (Ex)) Speed mixing shaft36 - 178 rpm Glass Reactors MaterialGlass Information LocationBarneveld Floorspace0,80 x 0,80 m Total height2,60 m Weight650 kg ATEX compatiblecheck Extra Specifications- No bottom outlet for product. Product has to be discharged by vacuum or pressure - baffle with temperature probe installed Technical specs  ...

General SKU201P093 MakeSGL Technik Gmbh Meitingen (DE) TypeRS-77-2-5515.1 LocationBarneveld Material Tube materialGraphite Diabon-NS1 G20-3-170 Pressure Working pressure shell6 Bar Working pressure tubes6 Bar Main Features Shell (Material)Graphite Tube (Material)Graphite Surface8 m2 Specified Features - Shell and tube heat exchanger MaterialGraphite Diabon-NS1 G20-3-170 Heat exchangercheck Verticalcheck Notified bodyTÜV Heating surface8m2 Tube capacity62 Ltr Number of tubes:55 Tube diameter37mm Tube length1500mm Wall thickness tubes5mm Max. temperature170 Degr.C. Shell capacity100 Ltr Shell diameter406mm Shell length1380mm Wall thickness shell6mm Max. temperature170 Degr.C. Shell connections(2x)DN80, DN40 Cover connections(2x)DN150 Information Floorspace0,7x0,7 M Total height2.2M Weight600 KGCatalysts & fillersFeed additivesPaper & otherSolventsShell ...

General SKU360S873 MakeTrennso Technik (D) TypeSIK 500-1200-2-O No.0600117 Year of construction2011 LocationBarneveld Main Features MaterialMild steel Surface0.5 m2 Size length1200 mm Sizes width440 mm Specified Features - Vibro sieve Vibro sievecheck Sieve surface0,5 m2 Number of sieve decks:2 Sieve sizes440x1200mm Inlet190x190mm Outletdia 200mm (2x), dia. 250mm (1x) Drive excentercheck Motor0,75 kW 220-240/380-420 volt Sieve perforationdia. 10mm, 1x1mm With ball cleaningcheck MaterialMild steel Information Mounted on mild steel framecheck With switchcheck Floor space2,1x1,3 M Total height2,3 M Weight950 KgFeed additivesPaper & otherOther pharmaceuticsOrganicsE-waste & metalSugarAnimal feedOther feedSolid pharmaceuticsPlastic & rubberMinerals & inorganicPlastic & polymersRubberOther chemicalStarchGeneric medicinesPowdered foodsConsumer wasteVibro sievesTren ...

General SKUR0915 MakeTechnoglass (vessel) / Tycon (top part) (Ita) LocationBarneveld Type5445 ltr Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket6 Bar Vacuum possible jacketcheck Main Features MaterialGlass Volume7260 Ltr. Motor15 KW Specified Features - Glass-lined Reactor MaterialGlass - Enamel Glass Reactors Reactorcheck Capacity7260 ltr Vessel sizesdia. 1800x3190mm Dished bottomcheck Dished top sidecheck Manholedia. 500mm Top connectionsDN150 (5x) DN250 (2x) Outletdia. 100mm With jacket710 ltr Max. temperature-30/200 Degr.C With paddle stirrercheck Motor15 kW 380 Volt (Ex) Information No.5745 / 2705 Year of constructionvessel part 1996/ top part 1985 Floorspace2,3x2,3 M Total height5,9 M Weight9000 Kg ATEX compatiblecheck Extra SpecificationsClamped topCatalysts & fillersSolventsDetergent & surf.Other pharmaceuticsCosme ...

General SKUR1191 MakeTechnoglass Spa (IT) LocationBarneveld Type6300 L Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket7 Bar Vacuum possible jacketcheck Main Features MaterialGlass Volume7590 Ltr. Motor15 KW Specified Features - Glass-lined Reactor Reactorcheck Capacity7590 Ltr (nett.6300 Ltr) Vessel sizesdia.2000mm x3050mm Dished bottomcheck Dished top sidecheck ManholeDN500 Top connections2x DN250, 5x DN150 OutletDN150 With jacket(700 Ltr) (16,6 m2) Max. temperature-30/200 Degr.C. With paddle stirrerHastelloy C4/C22 Motor15 kW, 400 Volt (Ex) Speed mixing shaft6.9-69rpm Glass Reactors MaterialGlass - Enamel Information No.5785 Year of construction1996 Floorspace2,5x2,5 M Total height5,0 M Weight8500 Kg ATEX compatiblecheckCatalysts & fillersSolventsDetergent & surf.Other pharmaceuticsCosmeticsLubricants & oleoSolid pharmace ...

General SKUR1177 MakeTechnoglass S.P.A. (IT) LocationBarneveld Type1825 ltr. Pressure Working pressure3.2 Bar Vacuum possiblecheck Working pressure jacket7 Bar Main Features MaterialGlass Volume1825 Ltr. Motor1.1 KW Specified Features - Glass-lined Reactor Reactorcheck Capacity1825 Ltr (1600 Ltr) Vessel sizesdia.1000mm x2272mm Dished bottomcheck Dished top sidecheck Top connections2x DN200, 2x DN100, 2x DN80 OutletDN80 With jacket(130 Ltr.) Max. temperature-10/200 degr.C. With propellor stirrercheck Motor1,1 kW, 380 Volt (EX) Speed mixing shaft177 rpm Glass Reactors MaterialGlass - Enamel Information No.4622 Year of construction1990 Floorspace1,5x1,5 M Total height3,7 M Weight1300 KG ATEX compatiblecheckCatalysts & fillersSolventsDetergent & surf.Other pharmaceuticsCosmeticsLubricants & oleoSolid pharmaceuticsDyes & pigmentsAPIGlass-lined ReactorsAgroch ...

General SKUR0900 MakeTechnoglass spa (Ita) LocationBarneveld TypeAE 6300 Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket6 Bar Vacuum possible jacketcheck Main Features MaterialGlass Volume6300 Ltr. Motor15 KW Specified Features - Glass-lined Reactor Reactorcheck Capacity7250 ltr (6300 ltr Nett) Vessel sizesDia 1800x 3100mm Dished bottomcheck Dished top sidecheck ManholeDia 500mm Top connectionsDN150 (4x), 250 (2x) OutletDN100 With jacket(710 ltr) Max. temperature-30/200 degr.C With paddle stirrerHastelloy C22 Motor15 kW, 400V (Ex) Speed mixing shaft20-80 rpm Glass Reactors MaterialGlass Information No.5744 Year of construction1996 Floorspace2.3x 2.3 M Total height5.8 M Weight8500 kg ATEX compatiblecheck Extra SpecificationsBottom part make Technoglass (1996) Cover part make Tycon (1985) : Catalysts & fillersSolventsDeterg ...

General SKUR0905 MakeTechnoglass spa (top part) / Tycon (vessel part ) (IT) LocationBarneveld TypeAE 6300 Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket7 Bar Main Features MaterialGlass Volume6300 Ltr. Motor15 KW Specified Features - Glass-lined Reactor Reactorcheck Capacity6300 ltr (Nett.) Vessel sizesdia. 2000x3060mm Dished bottomcheck Dished top sidecheck Manholedia. 500mm (man hole cover missing) Top connectionsDN250 (2x), DN150 (5x) OutletDN150 With jacket(685 ltr.) Max. temperature-25/250 Degr.C With anchor stirrercheck Motor15 kW 380 Volt (Ex) Glass Reactors MaterialGlass Information No.4512 Year of construction1990 Floorspace2,4x2,4 M Total height5,1 M Weight9000 Kg ATEX compatiblecheckCatalysts & fillersSolventsDetergent & surf.Other pharmaceuticsCosmeticsLubricants & oleoSolid pharmaceuticsDyes & pigmentsAPIGlass-l ...

Semi-automatic keg handling machine for internal cleaning, steaming and filling of kegs with beer, wine, soft drinks. Designed for filling 30 liter and 50 liter plus kegs with flat fitting of the Micromatic round type. Nominal capacity: 40 - 50 keg/h depending on the type of beverage and the selected treatment times. Equipped with 4 treatment stations: - 3 interior cleaning stations - 1 filling station CIP station: - caustic tank, rectangular, with feed pump on elevated frame with feet - Acid tank, rectangular, with feed pump on raised frame with feet, Additional title: cleaning and filling, Capacity: 50 keg/h, Working pressure: 7 bar, Voltage: 220/380 V, Frequency: 50 Hz, Length: 2,0 m, Width: 2,0 m, Height: 2,0 m, Formats: 30 and 50 liter Plus kegs with A-type fitting of the Micromatic round type, Operation / Control: semiautomatic, Material: stainless steel construction as frame, pipi ...

This used keg filling system from m + f KEG-Technik GmbH & Co. KG (built in 1989) is a reliable solution for cleaning and filling kegs with a capacity of up to 30 kegs per hour. The machine is equipped with two heads for filling and cleaning as well as two CIP tanks, ensuring efficient and consistent operation. It supports flat and basket formats and is controlled via Siemens S5. Thanks to its robust construction and compact design, this system is ideal for breweries or beverage manufacturers looking for a proven and cost-effective solution. Our team at VBW Asset Trade will be happy to answer your questions., Capacity: 30 Keg/h , Pressure: 5 bar, Length: 2,40 m, Width: 1,90 m, Height: 2,10 m, Weight: 400 kg, Formats: flat- and basket-fitting, Operation / Control: Siemens S5, Features: 2 heads (both filling and cleaning), 2 CIP- vessels

This coding machine from Videojet Technologies GmbH is a powerful thermal transfer printer designed for reliable and precise product marking in packaging lines. With a capacity of up to 150 packages per minute, it is ideal for high-speed production environments. The machine is operated via the intuitive CLARiTY control system with a single monitor, ensuring simple and user-friendly handling. The device is mounted on a height-adjustable mobile carrier with feet and wheels, allowing it to be flexibly integrated into existing lines. Thanks to its modern design and robust construction, this machine offers a reliable and efficient solution for printing data, batch numbers, and product information. Our team at VBW Asset Trade will be happy to answer your questions., Additional title: Thermal transfer printer, Capacity: 150 packs/min , Current: 1,86 - 3,85 A, Voltage: 100 - 240 V, Frequency: 50 ...

3 cylindroconical fermentation and storage tanks with frame and cone cooling, Additional title: Vertical stainless steel tanks with frame and cone cooling, Total volume: 3000 l, Pressure capacity: 3 bar, Length: 1860 mm, Width: 1860 mm, Height: 3700 mm, Material: stainless steel, Base construction: standing on feet, Features: frame and cone cooling, sampling tap, DN50 connection; panel with valves;

TurboChef Technologies pizza oven, model: HCW2620EW, serial number: Hhc2620EWED00504, year of construction: 2018, 400 V, 3 Ph, 50/60 Hz, 21 A, 4.4 kW, s/s mesh belt, belt width: 655 mm, total dimensions: 1550 mm x 1000 mm x 370 mm. Without table.