We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,320 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
This BOEHRINGER DUC 560 Lathe was manufactured in the year 1995. It is equipped with a NUM+KELLER CNC PLUS control unit. The machine has a spindle speed of 3-2500 rpm.
used
This Boehringer VDF 250 Cm Lathe was manufactured in the year 1996. It is equipped with a Siemens Sinumerik control unit. 6 of 12 positions on the turret are driven. No clamping devices are fitted.
used
This BLM ADIGE LT 722 LASER TUBE Cutting machine was manufactured in the year 2007 and has 64000 production hours. It is equipped with a Siemens 828D control unit. The machine has a laser power of 3,0 kW.
used
Leak detection machine for ampoules 2004 BOSCH KLD 1042. Format parts: 1,2,5 and 10 ml. ampoules;
used
Bizerba GLMI scale labeling machine, weighing and labeling device + detector
used
PLC control, electronic module, interference filter, power supply line filter, ballast, line filter, power line filter, three-phase filter, three-phase line filter, filter module, line interference filter -Manufacturer: Sew Block, line filter interference filter -Type: NF 063-503 HLD 110-500/55 -Voltage: 3x 500/520V 50 - 60Hz -Dimensions: 250/85/H95 mm -Weight: 2.8 kg
used
Spindle attachment (chuck) ASA 6 Chip conveyor Yes to the carpet Maximum workable length1 (capacity) 520 mm Unity of government Fanuc Spindle speed (main spindle) 3200 rpm Turnable diameter 250 mm Bar passage 80 mm
used
Description: Serial number: 0842010005 Load capacity: approx. 250 kg Compressed air operated Approx. Onsite Dimension. (l x w x h): 700 x 500 x 1,250 mm, weight approx.: 80 kg
used
Bodor C6 6 Kw Laser Cutting Machine Table size : 6100 MM 2500 MM Power: 6 KW Metalix program Compressor Machine is like new condition
We sell approx: 350x Epson TM-H6000IV receipt printers (used) 50x Bixolon label printers (new and used) 115x Epson 7 printers TM-T88VII-132 (NIB) in brand-new original packaging. In most cases, the entire item can only be handed in completely. More information on request. In most cases, advertised products can only be sold as a complete lot. More information on request. We look forward to receiving inquiries from Germany and internationally. We have many other refurbished/used hardware available from the areas of the systems mentioned here as well as from other systems of these manufacturers: IBM, DELL, HPE, ORACLE, NETAPP, QUANTUM, STK, FUJITSU, SGI, HDS, EMC, Supermicro, BULL, NEC, CRAY, 3Com, ADVA, Alcatel, Brocade, Cisco, Enterasys, Extreme Networks, Huawei, Marconi, Nortel, Qlogic, Avaya, ORACLE Tested, tested used hardware at a reasonable price from HASCO ...
used
Lathe with 4 tools only for 3-cylinder crank shaft
used
material width:250 mm material thickness:0,2 - 2,0 mm no. of straightening rolls:7 straightening roll diameter:60 mm run-in height:1250 mm power capacity:4,0 kW weight:0,65 t Dimensions (WxDxH):1,05 x 1,25 x 1,5 m
used
BWF fixators for alignment and fastening / zum Ausrichten und Befestigen Model : SV Number : 5001 Base dimensions : 330 x 225 mm Height : 400 mm Bolt : M 36 x 1,5 x SW 30 Weight : 28 kg Quantity : 11 pieces This lot is loaded for free
used
BWF fixators for alignment and fastening / zum Ausrichten und Befestigen Model : SV Number : 5001 Base dimensions : 330 x 225 mm Height : 400 mm Bolt : M 36 x 1,5 x SW 30 Weight : 28 kg 10 pieces This lot is loaded for free
used
BWF fixators for alignment and fastening / zum Ausrichten und Befestigen Model : SV Number : 5001 Base dimensions : 330 x 225 mm Height : 400 mm Bolt : M 36 x 1,5 x SW 30 Weight : 28 kg 10 pieces This lot is loaded for free
used
BWF fixators for alignment and fastening / zum Ausrichten und Befestigen Model : SV Number : 5001 Base dimensions : 330 x 225 mm Height : 400 mm Bolt : M 36 x 1,5 x SW 30 Weight : 28 kg Quantity : 11 pieces This lot is loaded for free
used
Palettenheber / Pile Hoists - Stack Lift Baumann NU-FO Baujahr / Year 1989 - Serial-No. 51587 Format / Size max. 1100 x 800mm Hebekapazitaet / Loading capacity max. 1000KG Hubhoehe / Lifting height max. 1000mm -Online-Video-Inspection by Skype-Video- -We would be very pleased with your visit - more machines on Stock- -Available Immediately - Can be inspect- -On Stock Emskirchen / Nuernberg - Can be test-
used
Clamping plate diameter: 3200 mm Max. workpiece diameter: 6300 mm Max. workpiece height: 2500 mm Max. workpiece weight: 5000 kg Stand movement:: 1550 mm Crossbar movement: : 1900 mm
used
Palettenheber / Pile Hoists - Stack Lift Baumann NUP 1600 Baujahr / Year 2005 - Serial-No. 52970 Format / Size max. 1500 x 1185mm Hebekapazitaet / Loading capacity max. 1600KG Hubhoehe / Lifting height max. 1400mm -Online-Video-Inspection by Skype-Video- -We would be very pleased with your visit - more machines on Stock- -Available Immediately - Can be inspect- -On Stock Emskirchen / Nuernberg - Can be test-
used
Center height: 165mm, center distamnce: 600mm, turning length: 560mm, max. rotational speed: 3200/min, swing over surface/ bed: 200/ 315mm, weight: 1.8t.
used
Center height: 265mm, center distance: 1500mm, rotational speed: 9-1800/min, swing over bed/ crank: 550/ 750mm, connected load: 18.5kW, length: 4100mm, width: 1900mm, height: 1900mm, weight: 3.9t.
used
Center distance: 1500mm, swing over bed slide: 145mm, center height: 245mm, with copying device and documentation.
used
Chuck diameter: 400mm, rotational speed: 11.2-560/min, track length: 2900mm, including chucks and chisel holders.
used
Traverse paths facing slide/top slide/tailstock quill: 345mm/125mm/190mm, longitudinal/face feed per revolution: 56mm/28mm, speed: 2240rpm, max. workpiece weight: without setting block: 500kg, 1 setting block: 630kg, 2 setting blocks: 800kg. Circumferential diameter over bed/plane slide/bed spreading: 570mm/365mm/600mm. The automatic plan feed is defective. Documentation available.
used
With multi-fix holders size C, ACU Rite position indicator, rapid traverse in X and Z axis, three-jaw lathe chuck Forkardt F315, without documentation, an on-site inspection is possible.
used
Palettenheber - Pallet Lift Butler Year 1985 Tagfaehigkeit / Lifting Capacity 1.200KGS Hub / Lifting high 1.000mm Pressluftanschluss / Air supply 6 bar Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nuernberg - Can be test
used
Speed range: 45-2800 rpm, speed grading: 1.25. Turret slide: Diameter of turret head: 160mm, number/diameter of tool mounting holes: 6 or 8 /25.4mm. Working path of the turret slide: 90mm, adjustment of the working path: 35mm, distance turret head to spindle head: 90mm-285mm. Dimensions X/Y/Z: 2250/970/1600, weight: 2500kg. On-site viewing is possible.
Fully automatic offset and digital Touch Screen Auto-Balance Temperature Pneumatic Pressure Sheets size : 210x297 – 380x700 mm Sheet weights : 130-350 g/m² Speed : 15 m/m (2000 sheets SRA3/hour – 1800 sheets B3 portrait/hour)
used
Pneumatic feeder with 2 air suction units Thermal oil sealed heating roller Cutting unit Sheets size : 530x750 – 220x220 mm Sheet weights : 130-350 g/m² Speed : 25 m/m (3700 sheets SRA3/hour – 1800 sheets B2/hour)
used
Output wheat/wheat curd/maize: 2.4/0.45/2.4t/h, motor power: 0.3kW, length: 1950mm, width: 1665mm, height: 1895mm, weight: 500kg.
used
TECHNICAL DATA Net weight: Kg 1330 Length: mm 2400 Width: mm 1550 Height: mm 1870 Voltage: Volt 230/400 Power: Kw 4 Frequency: Hz 50 PRODUCTION CHARACTERISTICS Production up to 48.000 vials/h Min. height vial: 20 mm Max. height vial: 140 mm Min. diameter vial: 7,5 mm Max. diameter vial: 36 mm Pressure: 2 bar The ESA series labelers apply self-adhesive labels from the reel to bottles and vials, cartridges and other unstable containers. All electrical, electronic and PLC components are integrated into the machines to save space. These continuous motion labellers have an extremely compact design. The label dispenser has a modular design and can be equipped with both intermittent motion and continuous motion printing systems. For added convenience and reliability, the functionality of the label dispenser can be enhanced by a number of additional controllers and wor ...
used
Billhöfer A-20-P Autom. Laminating unit (wet lamination and thermal lamination) Type: FK - 102 S Year: 1997 Largest sheet format X = 1020 mm Largest sheet format Y = 1140 mm Smallest sheet format X = 200 mm Smallest sheet format Y = 300 mm Max.Speed: 60 m/min. = 12,000 Bg/h -Disconnector - Depowdering station with filter and suction - Foil cutting device - Electronic overlapping system - Smoothing calender with temperature control device - Clock rollers - Double-sheet control - Electronic foil brake - Electron separation point. - Back pressure roller -Auto. Destacker
used
CNC Vertical Lathe BERTHIEZ TFM 125 Numerical Command: NUM 1040 Maxi turning diameter: Ø 1550 mm Turning height: 1000 mm Vertical run of the slide: 800 mm Max turning height under crossbar: 1280 mm 2 speed ranges: 1 to 125 RPM - 1.6 to 200 RPM 4-jaws chuck Ø 1250 mm False platform diameter: Ø 1500 mm Maxi permissible weight on chuck: 10 T Motor: 22 kW Horizontal travel at right of chuck: 895 mm Horizontal travel at left of chuck: 935 mm Left coolant section: 180 x 180 mm Tool changer: non-functional Chip Conveyor Voltage: 380 V Weight: approx 20 T
used
Max. load: 400kg, weight: 580kg.
used
Max. load: 5t, length: 2205mm, width: 550mm, height: 600mm, weight: 250kg, an on-site inspection is possible.
used
Used root vegetables line by Boema. New 2007. Capacity 6000 kg/h. The line consists of: 1. Straight rubber lifter 2. Drum soil remover 3. De-stoning machine 4. Drum rinser 5. Straight elevator made of PVC 6. Steam peeler 7. Cooling tub with auger 8. Brush peeler 9. Single-screw pump with self-discharge hopper 10. Drum filter 11. Control belt
used
Description Twin Roll Cast Cooling Calender - Twin Cooled Cylinders, diameter 700 mm each - Cylinder length 2650mm - Eurotherm Gauging System
used
Key data: 45
Extrusion line for 3D monofilament composed of: - Extruder 1 spindle, brand: Bandera, 45 mm diam 25 L/D, motor: 10 hp. With drying hopper: 100 L, master dispenser. With electrical panel and variable speed drive. - Head for 3D monofilament. - 3 stainless steel bathtubs: 2 m. - Stretch: 4 rollers. With variator. - 2-point monofilament thickness gauge. - Winder: 480x500 mm diam. For large coils. - Large reel unwinder and double rewinder for small reels. Ready to get started? Contact us directly! Send us a WhatsApp message to (+34) 647 590 257 or an email to infogester.es for personalized advice.
used
72”x 0.5” x 60,000Lb Braner Turret Type Loop Slitting Liney Braner Turret Type Loop Slitting Line is used for coil metal cross cutting with maximum width 72”, maximum 0,5” metal thcikness and 60,000Lb coil capacity Make: Braner Year New: 1996 Material Thickness: .060″ – .500″ Material Width: 12″ – 72″ Coil Weight: 60,000Lb Line Speed: 120 – 250 feet per minute Coil ID: 20″ – 24″ Coil OD: 75″ Slitting Cap: .500″ / 4 cuts – .125″ / 40 cuts Entry L-Type Coil Car Hydraulic Lift & Traverse Self Contained Hydraulics Control Panel Mandrel Uncoiler Powered Hold – Down Roll Outboard Bearing Support Hydraulic Feed-Up Drive Water Cooled Brake Hydraulic Peeling Table Driven Entry Pinch Rolls Adjustable Edge Guides Entry Mechanical Crop Shear Two Turret Type Slitting Heads Arbor Diameter: 12″ Powered Arbor Adjustment Powered Head Rotation Motor: 100HP DC Driv ...
used
Machine is fully functional and has its own cooling and a Heidenhain digital has a three-jaw chuck and a clamping width of 450mm is 3 meters long and 3 tons heavy you can clamp through the jaw chuck so longer workpieces are no problem it has a rotary heart and various cornel and jaws to exchange machine is in a very good condition and machine manuals are included
used
Number of axes - Equipment - : - - : 2 MAIN SPINDLE : Spindle power : 15 kW Spindle speeds : 5000 rpm Max. bar diameter : 45 mm Max. machinable length : 560 mm Max. chuck diameter : 220 mm TURRET : Number of positions : 12 X/Z stroke : 170 / 560 [mm] WEIGHT & DIMENSIONS : Machine floor space : 4240 X 2000 [mm] - Machine height : 1900 [mm] - Machine weight : 4200 [kg] CNC : Fanuc 21i-TB Coolant tank : Chips conveyor : Tool probe :
used
This Tornos-Bechler DECO 2000/13 manufactured in the year 2000. Operated through a Fanuc PNC-DECO control unit, this machine incorporates a head speed of up to 10,000 rpm. Includes a charger for bars from 4 mm to 26 mm in diameter. Presents perfect conditions Brand: Lathes-Bechler year 2000 MODEL: DECO 2000/13 production hours: 55,000 application type: Turning Location: Spain machine type: lathe Availability: Immediate Control unit brand: Fanuc General data Machine length: 1260 mm Machine width: 2000 mm Machine height: 1950 mm Machine weight: 3000 kg Control unit Brand: Fanuc Model: PNC-DECO main transmission Spindle speed range: 100-10000 rpm 1/MIN Half Main current type: 400 V Power consumption: 13KVa Technical benefits of the machine: - 10 axes - Robobar charger ssf-226 for bars from 4 mm to 26 mm in diameter Qualitative benefits of the machi ...
used
Complete retrofitted line consisting of: Processable material: plasticized PVC and polyphenyl composition passive pay off Bandera 3025 extruder overhauled with Toshiba inverter 2 extrusion screws (1 for PVC 1 for polyphenyl) cable and profile extrusion head 4 meter stainless steel tank double flywheel drive (interface on line with inverter) double reel winder for 400 reels
used
Potting line capacity 1000 beats per hour. Adjustable dosage currently set at 230ml. Automatic hopper for twist off, front labeling machine for 1 side . Revolving collection table capacity 150 jars of 314 ml. It is sold in like new condition, machinery with 40 hours of work. Pasteurizer is no longer available
used
Production year: 2013 The machine has only been tested - like new. Checkweigher and labeller for the packaging line for meat, fish, fruit and vegetables. Checkweigher G1000 with metal detector and two flippers, Marel brand - quality control for metals, roller system, full control of the weighing process on the display, the ability to print production reports using a printer connected to the scale. Weigh and automatically converts to the right price. Concept 500 label applicator with two thermal transfer printers, Marel brand - 250 labels / min performance (depending on size, easy to use (easy change of label rolls), prints twice from both sides.
used
Webster & Bennett 36” Fixed Rail vertical borer Table Diameter 36 ” with a set of standard jaws Max swing 46 ” gripped on the inside Max height under cross rail 23” Travel of ram 22” Cross travel 23” from centre and will travel 2” past centre Table speeds 185 to 400 RPM ( 12 ) Feeds 0.005” to 0.250” per rev ( 12 ) 25 HP main motor Volt 440
used
sheet width - max.: 1020 mm plate thickness: 1,5 mm cutting length: 1020 mm weight: ca. 300 kg dimensions of the machine ca.: 1,3 x 0,8 m Side stop: 600 mm Material place of deposit: ausziehbar Hand lever shears with counterweight, length stop, blank holder with Quick clamping, mm scale on the table, pull-out sheet metal support. Demonstration machine at a special price. Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Features BIGLIA B501S Complete with TS560 magazine Bar passage 54 mm Maximum workable diameter for shooting 250 mm Maximum workable length 500 mm Maximum rotating diameter 520 mm Main spindle Rotation range from 40 to 4000 RPM Spindle nose Asa five Spindle hole 52 mm Bearing internal diameter 80 mm Self-centering diameter 165 mm Motor power 5.5 to 7.5 kW Turret Number of positions 12 Bidirectional type Tool shank external internal diameter 25 × 25 diameter 32 mm Racing aces X axis travel 210 mm Z axis travel 500 mm B axis travel 510 mm
used
Type: CF 1500 / PS Parameters: 18 mm, 1500 x 3000 mm Manufacturer: Balliu Year of production: 2005 Location: Czech Republic Description: Laser BALLIU CF 1500 / PS, 3.5 kW, year 2005, in operation under power, possible inspection, regularly serviced. It is a CO2 laser with linear motors and uses the SPAB Rofin Sinar laser resonator. Advantages of this laser source: Cheap traffic Low demands on rare gases such as Helium and Argon The machine only needs dehumidified frozen air to operate. It still has its own Donaldson freezer and therefore does not need 5.0 nitrogen for operation. Black sheets are cut with oxygen 4.0 and higher, stainless steel sheets with nitrogen 4.0 and higher. It has a resonator of 3,500 W, which means that it cuts black sheet metal up to 18 mm and stainless steel up to 8 mm. It has Siemens linear motors, so it hardly requires maintenance and does not wea ...
used
Used bachiller model PC-200 stainless steel vacuum mixer. 338 litre total capacity, 126-200 litre working capacity. Mixing bowl approximately 866 mm diameter x 650 mm straight side. Flat top and inverted dished bottom rated full vacuum. Stainless steel jacket rated 3 bar pressure. Anchor agitator with teflon scrapers driven by 2.2 kw 220/380 volt 3/50 1415 rpm or 2.55 kw 440 volt 3/60 1715 rpm motor through sabre model mas55df gearbox 69:1 reduction ratio. Approximately 220 mm diameter dispersion blade mixer direct driven by 7.5 kw 380 volt 3/50 1450 rpm or 8.6 kw 440 volt 3/60 1755 rpm motor. Lid raised and lowered by 0.55 kw 220/380 volt 3/50 1400 rpm or 0.63 kw 440 volt 3/60 1695 rpm hydraulic power pack. New 1987.