b b used for sale

Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -Sheet metal claws -Span: 0 to 30 mm -Load capacity: 3000 kg -Number: 2x terminals available -Price: per piece -Weight: 15.4 kg/piece

- Handwheel adjustment of spindle height/angle - Spindle angle displayed via viewing window, swivel range -4 to + 45° - Right-left rotation - double-sided table extension to 2,000 mm - Engine power 5 kW - Speed 3,000 / 4,500 / 6,000 / 9,000 / 12,000 rpm (manually adjustable) - Suction nozzle Ø 2 x 120 mm - Emergency stop switch) - Power: 380 V, 50 Hz, 3~, 10.8 A - with 4-roller feeder

Electric motor, three-phase motor -Power: 4 kW -Speed: 2860 rpm -Shaft: Ø 28 x 60 mm -Construction: B35 -Protection class: IP 54 -Dimensions: 380/250/H270 mm -Weight: 30 kg

table length: 3000 mm table width: 1500 mm table load: 20 t bed width: 1000 mm guideway width: 150 mm T-slot - width: 28 mm x-travel: 3000 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Electric motor, three-phase motor -Foot defective, see photo -Power: 4 kW -Speed: 2860 rpm -Shaft: Ø 28 x 60 mm -Construction: B35 -Protection class: IP 54 -Dimensions: 380/250/H270 mm -Weight: 30 kg

Bizerba CWL Eco flex continuous scale with Sick VMS520 volumetric measuring system Bizerba CWL Eco flex Continuous Scale Dynamic weight detection with volume determination The CWL Eco flex can be integrated almost effortlessly into existing parcel shipping, sorting systems and feeding lines. Bizerba WM-CWL flex Continuous Scale Model: CWL Eco in Motion DE-09-MI006-PTB018 Max 60 kg Min 0.4 kg 230 V Sick VMS520 volume measurement system Features • Non-contact, active measuring method • Measuring the length, width and height of cuboid objects • Measure the length, width and height of objects with almost any shape • Works with a wide variety of surface structures and on different flat conveyor systems • Flexible system configurations • Calculation of the small-envelope cuboid (box volume) • Calculation of the real volume Device components Sick ...

Double hydraulic pump, oil pump, gear pump -Engine power: 11 kW at 1440 rpm -Pump: Ostrta A 16 -Nominal pressure: 160 bar -Flow rate: 16 l/min -Protection class: IP 44 -Dimensions: 670/290/H335 mm -Weight: 99 kg

Screening plant unfortunately no nameplate so no information about the system

Three-phase motor, electric motor -Power: 24 kW -Speed: 1480 rpm -Shaft: Ø 55 x 105 mm -Design: B3 -Protection class: IP 55 -Number: 3x motors available -Price: per piece -Dimensions: 760/500/H390 mm -Weight: 251 kg

Three-phase motor, electric motor -Power: 3 kW -Speed: 1430 rpm -Shaft: Ø 28 x 60 mm -Construction: B5 -Protection class: IP 44 -Number: 1x motors available -Price: per piece -Dimensions: 410/213/H240 mm -Weight: 36 kg

Gear motor, electric motor, electric gear motor -Speed: 20 rpm -Power: 0.25 kW -Design: B5 -Shaft: Ø 25 x 60 mm -Bolt circle: 130 mm -Recess: 110 mm -Protection class: IP 55 -Dimensions: 400/160/H220 mm -Weight: 17 kg

Three-phase motor, electric motor -Foot defective, see photo -Power: 4 kW -Speed: 2880 rpm -Shaft: Ø 28 x 60 mm -Construction: B3 -Protection class: IP 44 -Dimensions: 405/195/H230 mm -Weight: 34.5 kg

Screw compressor C9 Flow rate 1.1 m3/min 10 bar 7.5KW Hours 9000 Schematic E-Parts Compressor is unchecked.

Screw compressor Boge 400 V 11 KW 1.45 m3/min 10 bar Accessories : belts, filters, small parts The compressor goes to fault after switching on:

Three-phase motor, electric motor, Maka milling motor -Power: 1.3 kW -Speed: 2800 rpm -Shaft: Ø 18 x 40 mm -Construction with: dovetail guide -Dimensions: 330/135/H195 mm -Weight: 15.7 kg

geared motor, electric motor -Engine comes from a Gansow scrubber-dryer -Connection: 24 volts -Power: 0.5 kW -Dimensions: 400/270/H160 mm -Weight: 22 kg

Glue melter, glue machine, hot glue machine, industrial hot glue gun, hot melt glue gun -Connection: 220 volts -Power: 500 watts -Melting capacity of up to: 4.2 kg per hour -Machine: electrically heated -for cartridges -Funding: via compressed air -Weight: 1.8 kg

Machine type: Pipe drawing machine / line Working area: pipe diameter: 4-40mm, Wall thickness: 0.4-3 mm, Pipe length: 3,000-8,000 mm Speed: 60-80m/min Make: Bültmann Type: Pipe drawing machine type GKZ 080/01-10 Year of construction: 1995 Location: NRW Length 25,660 mm (entire system) Width 6,750 mm (entire system) Country of origin: Germany Delivery time short

Brand Bauer Model: GF-24KW Year of construction: Unused, 2023 Serial Number: On request Capacitance (KvA) 30 Capacity(kw) 24 Engine model ZH4100D Fuel: Diesel Alternator model YHG-24KW Voltage 400 Frequency (Hz) 50 RPM 1500 Amperes (A) 43.3 Dimensions LxWxH (mm) 1600 x 760 x 1650 Weight (Kg) ca 600 Number of pieces in stock 2 Made in China Comments Unused open skid diesel generator, Smartgen genset controller

Servo drive, servo card, output module, CPU card, input processor, power supply unit, control card, input card, controller, converter -Manufacturer: INFRANOR -Type: SMT BD1/1m -Type: SMTBM20A -Servo drive -Number: 1x control cards available -Price: per piece -Dimensions: 290/295/H70 mm -Weight: 2.7 kg

Properties: Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packed Manafacture: Budde Condition: Used Drive type: motorized vertical shaft Total length outside: approx. 1500 mm Total length inside: approx. 1850 mm Total width incl. motor: approx. 900 mm Total width without motor: approx. 560 mm Conveying width: approx. 540 mm Material: steel, plastic Colour: light grey Includes feet (height adjustable) and motor gearbox (North 0.55 KW) Ejector/ Smuggler/ Roller conveyor Due to the excellent workmanship of the roller conveyor, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics For roller conveyors, belt conveyors, inclined conveyors or telescopes for loading and unloading your goods, we are your competent partner! We would be happy to pro ...

amount: 1 STK weight: 25 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Servo drive, servo card, output module, CPU card, input processor, power supply unit, control card, input card, controller, converter -Manufacturer: INFRANOR -Type: SMD 101/120 -Servo drive -Number: 1x control cards available -Price: per piece -Dimensions: Servodrives -Weight: 0.4 kg

I am selling a stacking system HOMAG BARGSTEDT TBH22/D/25/12, built in 2001. Destacking system One-sided guide Spout also suitable for pallets. Postural head vacuum shoe system. Vacuum system (with pump) Automatic loading. Entry table motorized roller system Exit table on the floor with lifting mechanism motorized roller system Exit table front roller system Enters feed roller stazion for quilted material. Security fences fully complete ! Working capacity Approx. 8 cycles / min Available right away. Ready for use, possible to test. With CE certificate and full documentation.

One used SCHLATTER automatic binding unit for welded mesh stacks. Comprising a left and right unit; automatically binds the mesh stack

Forklift motor, electric motor, DC motor, traction motor, drive motor -Voltage: 75 volts -Power: 6.3 kW -Speed: 1400 rpm -Dimensions: 510/320/H280 mm -Weight: 76 kg

Young used machine with very few hours of operation. Compact cable recycling plant with low connected load for 80 - 120 kg/hour (depending on material) This system can be operated with a pre-shredder via a conveyor belt as well as in direct insertion. The system still has the original, unground set of knives, so it can hardly have more than 40 to 50 operating hours. Therefore, we offer this system including a 12-month used machine warranty. Pre-shredders, conveyor belts, dosing accumulators, etc. can also be obtained from us.

EMDE BFR 1500 Big-Bag Filling System with bag inflation system for the dust-free precise and reliable filling of big bags, max. load 1000 kg, electrics 400V/50Hz, power consumption 0.5 kW, capacity up to 40 big-bags per hour

Magnetic plate, clamping plate, magnetic clamping plate, magnetic clamping plate -Clamping surface: 100 x 100 x 300 mm -Dimensions: 100/100/H360 mm -Weight: 18.4 kg

Flange mount, drive flange -Feed flange with: drive bolt -Outer diameter: Ø 250 mm -Short taper mount for: bayonet disc mounting, taper size 8, bolt circle Ø 171.4 mm -Weight: 17 kg

Servo Amplifier Module, CNC Control System, plug-in card, -Control unit comes from a Hitachi Seiki HC400 machining center -Manufacturer: FANUC -Type: A02B-0094-B502 -with: 7x plug-in cards -Dimensions: 560/400/H255 mm -Weight: 12.2 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Transfer in current condition as seen -Speed: 112/224 rpm -Power: 0.5/0.7 kW -Construction: B3 -Diameter shaft: Ø 24 mm -Protection class: IP 54 -Dimensions: 400/220/H205 mm -Weight: 23 kg

12 stations main turret(6 are driven) - 6 stations sub turret - LNS sprint 552 barfeed new in 2010 - Fanuc 21TB Control.

Flange mount, drive flange -Feed flange with: drive bolt -Outer diameter: Ø 300 mm -Short taper mount for: bayonet disc attachment, taper size 6, -Bolt circle: Ø 133.4 mm -Quantity: 1x disc available -Weight: 20 kg

Flange mounting, driving flange -Chuck flange with: driving pin -Outer: Ø 300 mm -Short taper mount for: bayonet disc mounting, cone size 8, bolt circle Ø 171.4 mm -Weight: 30 kg

Three-jaw chucks, three-jaw lathe chucks, power chucks -Chuck size: Ø 250 mm -Short taper mount for: bayonet mount, taper size 8 -Weight: 41 kg

Cooling tumbler, vacuum tumbler, tumbler, vacuum mixer, vacuum mixing machine -Capacity: 1300 liters -Max. Vacuum: 950 mbar -Equipment: ejection flap, cooling housing, cooling -Dimensions: 2370/1500/H2320 mm -Weight: about 1500 kg

Tool setting device, tool presetting device, cutter setting device -Presetting device for: milling tools -maximum hob diameter: 500 mm -maximum height of the cutters: 500 mm -Dimensions: 800/400/H1600 mm -Weight: 242 kg

The scope of delivery includes: 03x Stacking container, used Manafacture: Thyssen Material color: hot-dip galvanized overall width: approx. 850 mm (outside-outside) Frame width: approx. 800 mm Usable width: approx. 780 mm total height: approx. 580 mm (floor - OK crane eye) Frame height: approx. 540 mm Usable height: approx. 400 mm Underride height: approx. 100 mm Total depth: approx. 560 mm (outside-outside) Frame depth: approx. 480 mm Usable depth: approx. 400 mm Stackable: Yes Crane eyelets: 4 pieces Diameter crane eyelets: approx. 40 mm Note: The stacking or transport containers can be bent. Furthermore, these dents, or other have damage.

Servo motor, electric motor, DC motor, stepper motor, stepper motor -Speed: 3000 rpm -Power: 2 kW -Design: B5 -Shaft diameter: Ø 19 mm -Number: 2 motors available -Price: per piece -Dimensions: 500/165/H210 mm -Weight: 9.2 kg

Various roller mills, grain mills, trough screws, plansifters, filter systems, screening plant, grain vibrators Manufacturer: GOLFETTO and BÜHLER The machines come from a flour mill and were in operation until they were shut down. The plant is currently being dismantled. We want to sell the machines as directly as possible from the location in Austria. Subject to changes and errors in the technical data, specifications and prices as well as prior sale.

SPECIFICATIONS: Working table: 1000 x 1000 mm CNC control: Bosch CC 120 3-axis machining: X: 1050 mm Y: 920 mm Z: 110 mm 6-fold tool changer Spindle: ISO 25 Vacuum pump (VGS): 40 m³ air Total power: 12 KW Spindle motor power: 4 KW Speed: 18000 rpm EQUIPMENT: 4 spindles

DC motor, servo motor, motor, electric motor -Speed: 3000 rpm -Power: 0.4 kW -Electricity: 65 V -Design: B14 -Shaft diameter: Ø 14 mm -Dimensions: 210/160/H160 mm -Weight: 6 kg

Bear AR30 planetary mixer 30Kg stainless bowl, variable speed, stainless mesh guard, with beater, dough hook and whisk attachment, 3Ph

Vacuum pump, rotary vane pump, rotary vane vacuum pump, pressure/vacuum pump, rotary vane pressure/vacuum pump -Drive: 2.2 kW -Flow rate: 100 m³/h -max. vacuum: mbar -Speed: 1400 rpm -Dimensions: 700/430/H620 mm -Weight: 85 kg

Bear AR40 planetary mixer 40Kg stainless bowl, variable speed, stainless mesh guard, with beater, dough hook and whisk attachment, 3Ph

Continuous Butter Churn Complete plant with PHE , controls, butter milk pump, tanks . Condition Good condition . Contact us for more information.

Multiple limit switches, buttons, limit switches -Type: BNS519-B5D16-100-1 -Price: per piece -Number: 2x available -Dimensions: 170/120/H107 mm -Weight: 2.9 kg

Gear motor, electric motor -Speed: 99 rpm -Power: 0.11 kW -Construction: B5 -Diameter shaft: Ø 14 mm -Protection class: IP 54 -Number: 1x gear motors available -Price: per piece -Dimensions: 300/145/H130 mm -Weight: 5.3 kg

Hydraulic clamshell bucket, hydraulic rotary grab, clamshell bucket, hydraulic grab -Bucket width: 300 mm -Opening width: 1640 mm -complete with: rotary servo -Mounting bolt: Ø 60 mm -Intermediate dimension: 270 mm -Dimensions: 1640/540/H2100 mm -Weight: 690 kg