b b used for sale

1 BECK shrink tunnel type HV1000, working width 100 cm, year 1995

1 BECK shrink tunnel type HV601, working width 60 cm, year 1999

Hose pump Manufacturer: Bredel Hose Pumps Type: SP/15 No.: 14845 Power: 0.37 kW in EEx protection speed-controlled very good condition LWH: 750 x 450 x 350 mm

GeneralCTX beta 1250 4A Two spindle turning centre with - partial hollow clamping device for main spindle and counter spindle internal diameter of draw tube Ø67 mm (2.63 in) x 700 mm (27.55 in) deep - 2 C-axes and spindle brakes (hydr.) - 2 12 fold Sauter star turrets reception VDI 40, DIN 69880-40 with precision interface (Trifix) and tool drive connection/drive acc. DIN 5480 - Y-axis, slide I - counter spindle slide; Control: CELOS X with Siemens 840D SL Operate Headstock, leftClamping chuck Ø315 mmSpindle nose diameter170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmDrive power (100% DC)25 kWTorque (100% DC)280 NmSpeed range0-5000 rpmC-Axis Speed2000 rpmHeadstock, rightClamping chuck Ø315 mmSpindle nose diameter170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmDrive power (100% DC)25 kWC-Axis Speed2000 rpmTorque (100% DC)280 NmSlide 1Longitudina ...

Specifications Model: 25 lpv Tool holder: MK3 Pinole stroke: 110mm Projection: 400mm Drive: 3 phase motor with 2 motor stages and V-belt drive Speeds 14 / 35 – 65 – 70 – 125 – 130 – 200 – 250 – 335 – 400 – 570 - 670 – 1140 – 990 – 1980 rpm Table dimensions: LxW 330x330mm Machine dimensions: LxWxH 410x700x1830mm On the machine, we installed a new motor and renewed the entire electrical system with the step and motor circuit breaker as well as the cables.

Mobile container heating system Year of construction 2023 Original price: 178.500,- € gross Boiler Buderus GE615 Power: approx. 511–570 kW Burner Weishaupt WM-L10/3-A Monarch Oil burner (tbsp heating oil) Regulation Buderus Logamatic 5311 Other components Two large heating buffer tanks Chimney outside Hydraulics complete in the container Connection cables for heating network Location of the machine: 76661 Philippsburg The facility can be visited on site. It is still energized and works perfectly. You can make an appointment for a viewing at any time before bidding on +49 (0) 72 55 / 39 73 337. We would love to hear from you. We will be happy to answer any questions you may have at any time. We are looking forward to a good cooperation and thank you for your interest in advance.

grinding diameter: 350 mm grinding length: 1500 mm centre height: 175 mm grinding wheel diameter: 400 mm grinding wheel width: 50 mm bore: 127 mm : MK5 work piece spindle speed: 20-400 U/min workpiece spindle - bore: mm grinding head swivelling: 360 ° grinding spindle head - swivable: 180 + - ° grinding spindle speed: 1500,1700,2200 U/min : 0-40 mm/Ø : 0-40 mm/Ø : ±6,5 ° longitudinal feed of the table: 1530 mm table speeds: 0,02-6 m/min : 130 kg : 130 inkl. Spannung kg cross travel: max. 270 mm : mm grinding depth: mm : 80 mm tailstock quill taper MT: 3 quill travel: 30 mm total power requirement: 6,5 kW weight of the machine ca.: 3,05 t dimensions of the machine ca.: 4 x 2 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service fo ...

BECKER & VAN HÜLLEN deep drawing press was built in Germany by Becker & van Hüllen Niederrheinische Maschinenfabrik GmbH & Co. KG. The machine has been continuously maintained and upgraded throughout its service life. In 2022, a major upgrade was carried out, which included replacing the seals, upgrading the control system, installing light curtains and adding a SIEMENS SIMATIC HMI TOUCH touchscreen operator panel. The BECKER & VAN HUELLEN 650T is used in industries specialising in stamping, production of automotive parts, tanks and other parts that require high press force and multi-stage forming. Its main purpose is deep drawing. The machining process is performed with a high press force of up to 650 tonnes. The two-stage design allows successive forming stages to be carried out in a single work cycle, thus enabling the manufacture of parts with even the most complex shapes. The m ...

CNC Model: Fanuc CNC version: 18i-T Main spindle nose: ASA 6 Main spindle power: 22Kw Main spindle self-centering diameter: 210mm Main spindle bar passage: 65mm Turning diameter: 250mm Turning length: 500mm Number of turns main spindle: 4000 Number of Tool Towers: 1 Number of tool places first turret: 12 Number of motorized first turret: 12 X axis travel first turret: 215mm Z axis travel first turret: 510mm Rapid linear axis feeds X Y Z: 24m/min Counter-spindle: yes Spindle nose: ASA 5 Number of spins: 4000 Power against spindle: 3,7Kw Bar passage: 43mm Z stroke counterspindle : 515mm Bar loader model and brand: Iemca Master 880 Chip evacuator: carpet operated Presetting: yes Number of motorized tool holders supplied: 4 :::D IMENSIONS AND WEIGHT::: Length: 4000mm Width: 1900mm Height: 1800mm Weight:  ...

diameter range 0,2-1,3 mm speed - meters/min 15

Technical data: SEGA BIANCO MOD. 350 UNDOCUMENTED

Bosch DM 4K 9301-D 1070083676-111 Specifications: Version: V0.00.4 670V-705V DC Original price: 6850,-€ Item condition: Used, in perfect condition There may be slight deviations in appearance and revision status, as several articles are available.

80 x 160 mm aperture. 80mm wide conveyor belt. 1730mm machine length. 830mm line height. Auto push reject. Left to right production.

Solenoid valve, directional control valve, valve manifold, control valve -Manufacturer: bar, solenoid valve type NM-321-H -Solenoid coil: MA 22 -Price: per piece -Quantity: 2 pieces -Dimensions: 135/72/H22 mm -Weight: 0.3 kg/piece

technical details: - Number of goats: 6 pieces - Number of press beams: 6 pieces - Number of clamping wrenches: 4 pieces - Number of screeds (2,500 mm): 8 pieces - Number of wooden inserts: 6 pieces (1 x divided) Metrics: - Trestle height: 1,000 mm - Trestle width: 1,450 mm (1,410 mm) - Clamping height: 360 mm, minus the screed thickness of 140 mm = 220 mm! - Clamping area: 2,500 x 1,120 mm - Length of the screeds: 2,500 mm (Subject to changes and errors regarding technical data and prices!) In accordance with our terms and conditions, we would like to point out once again that cheques and bills of exchange cannot be accepted.

Line filters, power line filters, three-phase filters, three-phase line filters -Manufacturer: EPCOS -Type: FS.06.3.50 -Voltage: 440/250 V/3 x 16 A/50-60 Hz -Dimensions: 200/155/H80 mm -Weight: 3.6 kg

Platesetter BASF EF III; good condition; cleaned and tested; Format 900x1200mm; pre- and main exposure; Post-exposure; dryer; Radiator. Exposure unit BASF EF III; good condition; cleaned and checked; size 900x1200mm; before and normal exposure; postexposure; dryer; Chiller.

Processing Manufacturer: Biesse Model: Rover 335 ATC Working range: approx. 3200mm x 950 mm Drilling spindles vertical: 24 pcs. Drilling spindles horizontal: 10 pcs. Milling unit: 7.5 KW

Power supply, power converter, power supply unit, switched-mode power supply, fire protection control unit -Manufacturer: Ströbich, protronic -Product: Control panel for power supply fire protection control RZ7 NT24-BMZ2 -Dimensions: 180/130/H2 mm -Weight: 0.1 kg

Technical data for the shelf connector: Shelving system: Bito Included in delivery are: 01x Shelf connector, used Material color: sendzimir galvanized Total length: approx. 300 mm Middle-center hole: approx. 260 mm Profile abbreviation: L 50 x 50 mm Material thickness: approx. 2.00 mm Weight/pcs.: approx. 0.437 kg

Working to the end with the MWM 620/2020 engine.

Test pump, pressure test device, measuring device, pressure test pump -Manufacturer: Junginger, mobile extraction device -Pressure display: 40 bar -Dimensions: 790/480/H775 mm -Weight: 47 kg

Key data: 1500

2 x JENBACHER Jen 420-GS-B25 Biogas Generator Set Model: Jen 420-GS-B25 Fuel: Biogas Year: 2012 Hours: 85,000 Capacity: 1,500 kW HZ: 50 Voltage: 400 V Scope of supply: Complete generator set including Engine, Alternator, Frame, Control system, Gas line, generator switch and other accessories. Service History Status: Rebuild done at 60,000h Available for sale from Gas Engine Exchange . Please check our complete range of equipment at gasengineexchange.com.

Power supply, power supply, DIN rail power supply, switching power supply -Input: 400-500 VAC/50-60 Hz/1.4-1.1 A -Output: 24 V 20 A -Dimensions: 195/80/H175 mm -Weight: 1.8 kg

Compressor Bitzer Type: 6F-40.2Y-40P Volume: 151.6 m3/h Cooling capacity: 100 kW at - 5°C/40°C, 83kW at -10°C/40°C, 42.7kW at -25°C/40°C Refrigerant: R404A Pieces in stock: 7 Reference number: S 145 Condition: Used in good condition Price on request, We have many other kealte plants and meat and fish processing machines : Bitzer,Copeland,Frascold,Lunite,Kueba,Guentner,Eco,Alfa-Laval,Goedhart ,Helpman

Available in stock 1 x Used BorgWarner Turbocharger type K31 for MAN Genset. The turbo was installed on a MAN E2876 LE 302 gas genset. Last turbo servicing was on July 2019. The equipment is in perfect working conditions.

Sensor, write head, read head, read/write head -Manufacturer: Turck Blident, read/write head -Type: TNLR-Q80L400-H1147 -Voltage: 24 VDC -Dimensions: 415/80/H25 mm -Weight: 1.1 kg

::TECHNICAL SPECIFICATIONS::: CNC Model: Selca CNC Version: 4045R Tool connection: HSK 63 Spindle power: 40Kw Number of spindle revolutions: 18000 Number of tools: 30 X Axis Travel: 1200mm Y Axis Travel: 1000mm Z Axis Travel: 600mm Rapid feed linear axes X Y Z: 60m/min Guides: roller Tilting rotary table: yes Tilting rotary table type: continuous Degrees tilting rotary table: - 30° +100° Table size: 860mm Permissible load on the board: 500Kg High refrigerant pressure: yes System with external tank with filter: yes Chip evacuator: carpet operated Other technical data: Drives: Simodrive 611 base with Selca adjustment boards The machine has been overhauled all axle roller guides, all ball screws and all bearings, axle geometry have been replaced

Available a complete dehulling line for oats, also efficient on spelt, sunflower seeds..output according technical notice about 3 tonnes per hour..Include all the machines in very good condition very very affordable price..Machines are like new.. list of machine available upon request request wellcome delivery to any destination possible.

Label book printing machine Iwasaki, machine number 1499, 3 colors, 2 colors, punching unit, embossing unit, various mounting plates, laminator, UV dryer, dispenser, slitter rewinder, in good condition, immediately available

Bock unit SHGZX7/1860-4 L R448A/449A/404A. Cooling unit BOCK for shock freezer, goes up to minus 40°C Price on request

Asynchronous motor, main spindle drive, 2AD100C-B05OB1-AS03-C2N1, R911246799, Rexroth, new Special price If you have a VAT number, we will be happy to issue you an invoice without VAT. As good as new in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is completely as new and in the original packaging. - Asynchronous motor, main spindle drive - Power: 12.6 - 18.9 KW - 380V / 3 pol. - 3000 - 9000 rpm - 40 Nm - 32 A - 58 kg Functional guarantee! For second-hand parts, we cannot provide a conventional guarantee and warranty. However, we give you a functional guarantee. If the device does not work during commissioning, you can return the goods and we will refund the purchase price.