133,970 used machines on RESALE, but how to find them? Machine Search
HHI-BBC Turbine Housing RPM - 17400 Only the turbine hull.
Blustrafos Transformer BLUTRAFOS MANUFACTURER LOT: 45,908 MONTH/YEAR 05/2007 REF 6606,0001 REFR: IN TYPE TT CLASS ISOL. 1.2 KV DEGREE. PROT. IP-21 PHASES 3 TEMPERATURE CLASS: TEMPERATURE B ELEVATION 105 ºC IMPEDANCE AT 115º C 5.5% POWER 15 kVA FREQUENCY 60 HZ DYM1 CONNECTION GROUP MASS: 156 KG VOLTAGE: 380 CURRENT 22.8 A VOLTAGE: 480V CURRENT: 18.04 A
Collator Year ca. 1988 20 Stations Collator, with Stiching Unit and Trimmer
approx. 111 pieces Corlettes, Cordes and Koch, width 1.30 / 2m / 2.40m - used - : Prices per piece from location (net): Type 1 + 2 (2m wide): only 99.-€ Type 3 (1.30m wide): only 69.-€ Type 4 (1.30m wide): only 99.-€ For complete purchase (priority): 8.950.-€ (net) Manufacturer: Cordes und Koch Type: Corlette / Multi-Box Year of manufacture: unknown Foldable Not stackable Depth: 1.15m Type 1 – approx. 70 pieces Width: approx.: 2m, Height approx.: 1.80m Type 2 – approx. 32 pieces Width: approx.: 2m, Height approx.: 1.92m Type 3 – approx. 6 pieces Width: approx.: 1.30m, Height approx.: 1.80m Type 4 – approx. 3 pieces Width: approx.: 2.40m, Height approx.: 1.80m Condition: good, see photos Available: immediately Location: Nuremberg
Pressure booster system, dry rotor pump heating pump centrifugal pump, water pump, inline pump used 2 pumps Manufacturer: Grundfos Type TP 150-250/4 A-F-A-BQQE Q 2x 295 m³/h at 20.4 m 16 bar 120°C 22 kW with pump control 96754726 Dimensions approx. 2500 x 1300 x 1600 mm All articles are checked for function before delivery, if technically possible! Changes and errors in the technical data, information and prices as well as prior sale reserved.
Scope of delivery: LTH 603.20 mist eliminator with housing + 6 full cone nozzles 405.228.1Y. AR.00.0 + 15 full cone nozzles 461.248.17.00.00.0 + 2 full cone nozzles 490.926.1Y. CG.00.0 + 1 LTV 400.20 Mist Eliminators + 3 461.048.1Y Solid Cone Nozzles. AK.00.0 + 1 mist eliminator LTH 603.30 + 1 oscillating soot blower PS-P + 1 retractable soot blower PS-HB + 1 oscillating soot blower PS-PB + 6 rear suspension + 6 flanges with reduction DN80 – 65 + 6 screw connections DN80 PN63 + 48 screw bolts LM 20x100 + 1 end bearing (88.9) Inst. 2 + 1 end bearing (88.9) Inst. 3 + 1 end bearing (88.9) Inst. 4 + 2 end bearings (88.9) Inst. 5-6 + 2 feed device 600mm Ø19mm + 1 x 50x59x2 seal, Commissioning part + 1 x 89x95x2.5 gasket, commissioning part + 1 x G1"R1 1/4" bleed valve, commissioning part + 1 x R243 stuffing box, commissioning part + 1 x stuffing box, commissioning part + 1 x DN80 PN63 spir ...
Scope of delivery: LTH 603.20 mist eliminator with housing + 6 full cone nozzles 405.228.1Y. AR.00.0 + 15 full cone nozzles 461.248.17.00.00.0 + 2 full cone nozzles 490.926.1Y. CG.00.0 + 1 LTV 400.20 Mist Eliminators + 3 461.048.1Y Solid Cone Nozzles. AK.00.0 + 1 mist eliminator LTH 603.30 + 1 oscillating soot blower PS-P + 1 retractable soot blower PS-HB + 1 oscillating soot blower PS-PB + 6 rear suspension + 6 flanges with reduction DN80 – 65 + 6 screw connections DN80 PN63 + 48 screw bolts LM 20x100 + 1 end bearing (88.9) Inst. 2 + 1 end bearing (88.9) Inst. 3 + 1 end bearing (88.9) Inst. 4 + 2 end bearings (88.9) Inst. 5-6 + 2 feed device 600mm Ø19mm + 1 x 50x59x2 seal, Commissioning part + 1 x 89x95x2.5 gasket, commissioning part + 1 x G1"R1 1/4" bleed valve, commissioning part + 1 x R243 stuffing box, commissioning part + 1 x stuffing box, commissioning part + 1 x DN80 PN63 spir ...
Handy edge milling machine 230V. Scope of delivery as shown. Edge milling up to 7mm, round edge milling up to R3mm. Angle adjustable. HM plates rotatable and replaceable. This new machine comes from a warehouse clean-up. Scope of delivery incl. chip catcher (not shown here).
Barwell Hydraulic Extruder – Used For sale: a used Barwell hydraulic extruder, designed for processing rubber compounds and elastomers. Barwell machines are well known worldwide for their robust construction, reliability, and consistent performance in industrial applications. The machine has been operated in an industrial environment, regularly maintained, and remains in good technical condition. Ready for further use after installation. Key features and advantages: Hydraulic drive ensuring smooth, stable, and precise extrusion Heavy-duty, solid construction for long service life Reliable operation, even with demanding rubber compounds User-friendly operation and easy integration into existing production lines Proven Barwell quality, widely trusted in the rubber industry Applications: Extrusion of rubber profiles and semi-finished products Preparation o ...
Dear's Sale, used 2 diesel engine Ulstein Bergen BVM-12 Brgds Hakan KUSCU +905323642509
Gathering machine Bourg BST-10 2 Towers Stitching Folds Cutting
Printing plate die-cutter for Roland 300 presses with CPL system. Tested, all punching modules without defect. Stock goods, can be shipped immediately.
Key data: 1000 KG, 3600 mm, 12800 mm
Pallet rack, Berger, height approx. 12.80m, 1.000kg / pallet approx. 8.660 storage spaces - used - : Price ex location: only 79.500.-€ (net), dismantled, packed and loaded! Price for larger quantities on request! Manufacturer: Berger Type: Pallet Rack Year of Make: 2021 Frame height: 12.80m Shelf height: top shelf: 12.030mm Frame depth: approx. 1.10m Type: SP115 Frame bracing: screwed Number of frames: approx. 416 pieces Max. pallet weight: 1,000kg Truss length: approx. 3.60m and Number of trusses: 870 pieces painted, 2,660 pieces galvanized Type: 150/160mm Bay load: 24,000kg, Payload per level: 4,000kg Condition: good, frames are without feet, they would have to be bought from the manufacturer! Available: immediately Location: Bremerhaven area P.S. the material comes from a mobile racking system for pallets / rack traversing system, so the frames are ...
Bosch Cartonetta 75 horizontal cartoning machine, bucket infeed, carton size range min. 15 x 15 x 54 mm (LxWxH), max. 92 x 66 x 180 mm (LxWxH), output up to 75 cartons per minute, leaflet folder from stack, reverse tuck closure of the carton flaps, Laetus Argus 6012 bar code reader for folding carton (opposite insertion side), leaflet (both sides) and presence of leaflet inside the carton, emboss coder (2 lines), electrical connection 400V/50Hz, power 4 kW, compressed air 6 bar, machine footprint approx. 2900 x 1300 mm (LxW), machine height approx. 1600 mm, machine net weight approx. 800 kg, retrofitted in 2009 by the company HVS including new Siemens SIMATIC S7-300 machine control system + SIMATIC panel
Servomotor, 230V, 12000 rpm, 0,55KW, SER366/3L3SS0CO, Berger Lahr, new Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. New! - never been used and is completely new, - comes from a spare parts warehouse of a certified production facility, - Berger Lahr is now Schneider Electric, - shaft D9mm, centering d50mm, 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for direct and indirect consequential damages. Our terms and conditions apply, see our website. Austrian law applies without exception and court location St. Pölten.
Machine Type: Bastra Smoke chamber for 1 trolley Electric heating: 28 kW Adjustable air circulation Pneumatically controlled fresh air, exhaust air, and smoke damper Cleaning: foam cleaning Smoke feeding: on customer request Smoking material: wood chips Without after-burning system Installation dimensions of machine in cm: Width: 175 Lenght:120 Height: 210 Trolley dimensions in cm: 100100200 height Delivery time: 30 working days after advanced payment
3 pcs double spindle machining centers SW BA422 built 2015/2014/2014 - 4-axis version Workspace x-axis 400 mm y-axis (tool change position) 500 (775) mm z-axis 425 mm Spindle spacing 400 mm Double swivel beam (Q-axis) 0 – 180° with NC rotary axes and counter bearings ----- Number of spindles 2 Spindle speeds up to 17,500 1/min Power 40/ 100% ED 2x 35/26 KW / 80 Nm ----- Feed/rapid traverse x/ y/ z 55/ 70/ 70 m/min Tool magazine 2 x 60 tool positions Tool holder HSK 63 Max. tool diameter 80 / 160 mm Max. tool length 300 mm Max. tool weight 10 kg Installation area L x W x H approx. 7.0 x 4.0 x 4.38 m Machine weight approx. 18,000 kg Transport weight approx. 15,000 kg Equipment: - Expansion of the tool magazine to 2 x 60 tool positi ...
AFT buttering machine Stainless frame, twin lane, lane width 125mm, overall length 1600mm, 3Ph, mobile
Side channel compressor, two-stage The VASF 2.50/2-0.AC230 is a turbo machine with VARIAIR frequency converter that offers high performance with 100% oil-free and contact-free operation. These side channel blowers are low maintenance, highly efficient and require minimal maintenance. Features VARIAIR Frequency Inverters Non-contact compression Compact design Intake and exhaust mufflers Sealed bearings eliminate the need for lubrication Vibration dampers for horizontal installation Additional cooler Pros Exact volume flow through speed control Low operating and exhaust gas temperatures Quiet operation Specifications VASF 2.50/2-0.AC230 Volume flow: 24 m³/h Pressure relative: +560 mbar Inverter power: 0.65 kW Hz: 50... 300 Hz Sound level: 61 dB(A) Weight: 12.3 kg with motor & inverter More items - new and used - can be found in our shop! International sh ...
BENHIL BUTTER PACKER MODEL : 8311 FORMAT : 250grams Capacity : 40pcs/min Hopper Feed Condition : Fully Refurbished
Transport vehicle / autonomous mobile robot (AMR), ActiveShuttle 2.0, Bosch Rexroth - used - : Price from location: 25.000.-€ (net)! autonomous mobile robot (AMR) for the automation of intralogistics, which transports floor rollers with a payload of up to 260 kg. It offers 3D obstacle detection, laser navigation without infrastructure adjustment, and an integrated touchscreen display for operation. The system is VDA 5050 compatible. Manufacturer: Bosch Rexroth Type: ActiveShuttle 2.0 Year of Make: 2021 7211000002280 / 3842560131 1x charging station 1x hand control unit Goods to be transported: floor rollers (600 x 400 mm) max. 1200 x 600mm Transport weight: max. 260 kg Travel speed: max. 1 m/s Localization (SLAM) & Navigation: Laser scanner, odometry Safety Laser Scanner: Type 3, SIL2, Performance Level d ESD (Electrostatic discharge) Li-Ion battery (48 V, 17 ...
NUMBER OF SPINDLES 21 SPINDLE DISTANCE 32 MM DISTANCE BETWEEN FIRST AND LAST SPINDLE 640 MM DOWEL DRILL HEAD BY MAGGI MADE IN ITALY
Specifications: Uniform spindle spacing: 32 mm Number of spindles: 23 Distance between the first and last spindle on the drill head: 672 mm drilling depth: 80 mm Table size: approx. 900 x 545 mm size of the workpiece: 800 x 2500 x 100 Working pressure: 0.6 MPa Air consumption: 10 NL/cycle Voltage, frequency: 400 V/50 Hz Spindle speed / min.l: 2800 rpm. Motor power: 1.5 kW Weight ca: 400 kg Dimensions: 1220 x 1065 x 1400 mm Patented spiral system Programming and adjustment devices of horizontal and vertical Drilling depth. Pneumatic drill head shears Drill head frame of 0-90 degrees with blocking in any position and reference switching angle with each angle Head with quick-connect spindles (the quick-release buckets are a Zubehoer). 5 quick-release buckets are standard. 2 patented pneumatic pressure devices accident-protected. 2 side connectors on the table ...
Duebel hole drilling machine BORING SYSTEM 21 PRESTIGE QUICK CONNECTIONS 21 DRILLING SPINDLES AXLE DISTANCE 32 MM CENTER DISTANCE FROM THE FIRST TO THE LAST DRILL CHUCK 640 mm DRILLING DEPTH 65 mm Engine power 2 hp Aluminium stop with 2 folding straps equipped with 1 left stop 1500 mm and 1 right stop 1500 mm 5 drilling spindle droplets 2 Pneumatic hold-downs in a safe and secure manner incl. packaging Quick Connection Drilling Spindles Drill head in cast iron Cast iron work table Drilling depth adjustment via patented spiral system Pneumatic scraping of the drilling group from 00 to 90 ° adjustable in any position. Stop infinitely adjustable via millimeter scale with magnifying glass High drills over num. digital display adjustable Back-side stop max. travel 300 mm Fixed stop on 37 mm for doorband Machine built according to Ce standards
- Manufacturer: Bekum - Machine type: BAS 34.2 - Stations / Stations: Single station / Single station - Year of construction / Built: 2001 - Location Germany - Control system: Original Bekum Beckhoff - Extruder | Extruder: 100/24D - Hose head / Parison head: AKZ4 (New by UES !) - Mold dimensions mm /mold dimensions mm (A length/ length x B width/ width x C depth/ depth): 700/700/2250 - Bottle volume Max./ Bottle volume max.: 30 lit - Monitor language: German/English - Delivery time | Delivery time: 30 days/ 30 days - Weight (kg): 13000
Pallet rack, Bito, height approx. 8m, 900kg / pallet, 3.60m trusses, approx. 1,372 storage spaces - used - : Price ex location: only 16.500.-€ (net), dismantled, packed and loaded! Price for larger quantities: on request! For complete acceptance price incl. frame protection and crash barriers! Ev. matching gratings are also available for an extra charge! Manufacturer: BITO Type: P5 Year of construction 2012 Frame height: approx. 7, 50m - 8 m Number of frames: approx. 64 pieces Frame width: approx. 12cm Frame depth: 1.20m Frame bracing: screwed Shelf load: up to 3,600 kg Bay load: max. 18,000kg at shelf distance: FA 1: 1,250mm / FA 2: 1,250mm Bay load: max. 10,200kg with shelf spacing: FA 1: 1,850mm / FA 2: 1,900mm Truss type: PT 150 S = truss height: approx. 15cm Field width: 3,600 mm Truss depth: approx. 5cm Number of trusses: approx. 560 pieces Compartm ...
internal diameter: 340/440 mm grinding depth: 9999999999999999999999999 mm swing diameter: mm grinding diameter: 250,350,450 mm grinding length: 600 mm centre height: 125,175,225 mm bore: 127 mm : MK5 work piece spindle speed: 20-400 U/min workpiece spindle - bore: mm grinding head swivelling: 360 ° grinding spindle head - swivable: 180 + - ° grinding spindle speed: 1500,1700,2200 U/min : 0,001-0,030 mm/Ø : 0-0,95 mm/Ø : ±10 ° longitudinal feed of the table: 900 mm table speeds: 0,02-6 m/min : 130 kg : 130 inkl. Spannugkg kg : mm : 70 mm total power requirement: 6,5 kW weight of the machine ca.: 2,2 t dimensions of the machine ca.: 3,1 x 2,0 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines.geometrical overh ...
Machine Type Electrode Inverter Welding Rectifier Böhler brand Type Uranos 1500 Connection voltage 1 x 230 Volt Setting range 5 – 150 amps Duty cycle 30 % ED at 150 Ampere 60% ED at 125 amps 100% ED at 110 amps Current adjustment infinitely variable weldable material thickness 4 mm Cooling inverter by built-in fan Version portable mounting system Fuse 16 amps Dimensions L x W x H 260 x 120 x 190 mm Weight 3 kg Age 6 months Special accessories carrying strap Condition workshop tested, as new, incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece ground cable 1 piece electrode cable 1 piece hand shield 1 piece attachment glass 90 x 110 mm, white 1 piece protective glass 90 x 110 mm, 10 DIN 1 piece slag hammer, heavy version 1 piece steel wire brush, 2 rows 30 piece rod elec ...
Pallet mobile racking, Bito, height approx. 8m, 900kg / pallet, 3.60m trusses, approx. 2,684 storage spaces - used - : Price incl. transfer car and gratings: only 99.500.-€ (net), dismantled, packed and loaded! Price as a normal pallet rack (without gratings) ex site: only 32.500.-€ (net), dismantled, packed and loaded! Please note that if you sell as a normal pallet rack, the feet must be purchased from the manufacturer (not included in the price). Price per grating (2 per level are needed): 49.-€ (net)! Price for larger quantities: on request! Manufacturer: BITO Type: P5 Year of construction 2012 Frame height: approx. 7, 50m - 8 m Number of frames: approx. 136 pieces Frame width: approx. 12cm Frame depth: 1.20m Frame bracing: screwed Shelf load: max. 3,600kg Bay load: max. 18,000kg at shelf distance: FA 1: 1,250mm / FA 2: 1,250mm Bay load: max. 10,200kg ...
Key data: 3700 kg, 775 mm
Fully Automated Forging Hammer Line (2004) BECHE KGH 5B (55 KJ) Line Description The complete line consists of the following machines: Tilting device, Stahlmann Conductive heating system, Stahlmann, D400G21/39000 XSH, 2004 Frako reactive power compensation Automation system, Lasco, 2009 2 Forging robots, Kuka, KR 30-3F Conveyor belt with lifting device Control cabinet with higher-level control system Short-stroke drop hammer, Beche, KG H 5.0B, 2004 Discharge robot for removal, Kuka, KR 30/2, with bucket, 1999 Technical Details (2004) Short-Stroke Die Forging Hammer BECHE KGH 5B Machine identification data Name: Short-Stroke Die Forging Hammer Model: KGH 5.0B Machine number: 155002 Year of manufacture: 2004 Operational parameters Working capacity max. 55 kJ Max. impact frequency 99/min Max. usable impact rate 55/min Maximum ...
Edge banding machine Brandt Optimat KDF 1600 GC YOC 2009 Edge thickness 0.4 - 12 mm Plate thickness 8 - 60 mm Feed 12 m/min Inlet ruler adjustable Pneumatic package Automation package Quickmelt Premelting Unit Joining milling unit 2 x 2.2 kW Cross-cut unit chamfer / Straight 2 x 0.35 kW Milling unit 2 x 0.55 kW Mould milling unit 2 x 0.35 kW (2 units) Drawing blade unit with quick-change heads Surface drawing blade for glue joint Schwabbelaggregat 2 x 0,18 kW Electronics control Connection value 11.5 kW Machine length approx. 6600 mm Weight 2900 kg
Commercial Joint Pre-Roll Machine for Condition: very good / NEW FEATURES 72, 143 or 453 Pre-Rolled Joints Significantly Faster Than Competitors Durable & Built for Commercial/Industrial Use Food-Grade Components Designed, Manufactured & Assembled in the USA OSHA Compliant
Machine type MIG/MAG inverter welding system Böhler brand Type Uranos 2000 SMC Connection voltage 1 x 230 Volt Setting range 5 – 200 amps Duty cycle 35 % ED at 200 amps 60% ED at 160 amps 100% ED at 130 amps Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner gas-cooled Version portable mounting system Wire feed gearbox 2-roller gearbox Fuse 16 amps Dimensions L x W x H 500 x 210 x 400 mm Special accessories TIG DC welding without HF E-welding, MIG soldering Weight 13 kg Age 6 months Condition workshop tested, as new, incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch, 3 mtr. long 1 piece ground cable 1 piece pressure reducer argon with 2 pressure gauges 1 roll of welding wire D-200 coil, 5 kg 1 can of non-stick spray 1 piece ...
Binder stainless steel mobile vessel, volume 335 l, with isolation jacket, permitted operating pressure inside vessel -1/4 bar, permitted internal vessel operating temperature max.150ºC, test pressure 7.1 bar, 2 sight glases positioned in the lid (diameter 50 & 90 mm), pressure manometer, lid connections for product inlet, ventilation and bleeding, 1 spare connection and CIP-System with spray balls with 360º spraying area, bottom outlet, vessel inner diameter approx. 800 mm, vessel outer diameter approx. 900 mm, total height of vessel approx. 1800 mm, net weight approx. 310 kg, on wheels (8 units available).
Key data: 3700 kg, 775 mm
Fully Automated Forging Hammer Line (2002) BECHE KG H 5B (55 KJ) Line Description The complete line consists of the following machines: Tilting Device, Stahlmann Step conveyor, Stahlmann Cold Belt Conveyor with Lifting Device Conductive Heating System, Stahlmann, E89, 2019 Heated Conveyor Belt Forging Robot, Lasco / Kuka, KR 60-3F, 2019 Central Control Cabinet Safety Fence with Safety Doors Short-Stroke Die Forging Hammer, Müller Weingarten (Beche), KG H 5B, 2002 Extraction robot, Kuka, KR 60-3F, 2019 Discharge station, Stahlmann Technical Details (2002) Short-Stroke Die Forging Hammer BECHE KGH 5B Machine identification data Name: Short-Stroke Die Forging Hammer Model: KGH 5B Machine number: 127050 Year of manufacture: 2002 Operational parameters Working capacity max. 55 kJ Max. impact frequency 99/min Max. usable imp ...
Key data: 2700 kg, 790 mm
Semi-Automated Forging Hammer Line (2001) BECHE KG H 4B (40 KJ) Line Description The complete line consists of the following machines: Tilting device, Stahlmann Step conveyor, Stahlmann Cold conveyor belt Conductive heating unit with 3 modules, Schneider, KEA, 2002 Frako reactive power compensation unit; - Cooling system is required - Hot conveyor belt Impulse blower Short-stroke drop hammer (forging), Beche, KGH 4B, 2001 Technical Details (2001) Short-Stroke Die Forging Hammer BECHE KGH 4B Machine identification data Name: Short-Stroke Die Forging Hammer Model: KGH 4B Machine number: 127050 Year of manufacture: 2001 Operational parameters Working capacity max. 40 kJ Max. impact frequency 98/min Max. usable impact rate 41/min Max. ram stroke 790 mm Weights Total machine weight approx. 58,000 kg Anvil bed 46,000 kg ...
Three-phase permanent magnet motor 3-phase permanent magnet motor used, normal condition used, average condition Please note: we got several new Bosch Rexroth servo drives in stock! We have a selection of new Bosch Rexroth servomotors in stock! Please contact us.
Universal trailer sweeper, hydraulic drive by means of PTO plug-in pump (also directly hydraulically possible), sweeping width min. 1600 mm, sweeping width max. 1,900 mm, dust binding with water and spray nozzles (200 ltr. plastic tank). Sweeping container 700 ltr. (emptying hydraulic, tilt height up to 1500 mm), sweeping roller pressure adjustable. Side broom trimming currently steel bristles – also suitable for weed removal. Operation of the machine via cable remote control. YOC 1998. Field of application: Community paths, squares, leaf pick-up, litter pick-up, weed removal, etc. More used sweeping technology in stock, just ask us!
maximum number of results exceeded
please refine your search
