b b used for sale

equipped with: 5 slide units 1 Eccentricpress 70 kN working range: wire diameter range: max. 3,0 mm strip metal width: max. 40 mm feeding length: max. 170 mm output: max. 250/min; ready for operation

Bran centrifugal Buhler type MKLA 45-110, 4 KW, Nr. 218056, V-belt drive 1050 RPM We have several bran centrifugals of different production years in different conditions at various costs in our stock. Just ask. We are happy to support you to find an affordable solution for your requirements.

Flow balancer Buhler type MZAC-12. 220 volt, in and out diameter 120 mm. We have several of these units in stock, in right and left, and various inlets. All have been tested in our workshop and are technically ok. Outer appearance not fine. Please contact our sales staff. We will gladly advise you and find the right device for your needs.

Nova Biomedical Biotech Analyzer Analysis Time: 50 sec; good

Manufacturer: BERGMANN Type: PS 8100 machine Height: 2200 mm Machine width: 1,200 mm Machine depth: 1,625 mm charging height 1900 mm Machine weight: 800 kg engine rated current at 400 V 3.0 Rated current converter 230 volts Motor power: 0.38 2 2 kW Required fuse: 10 A, 13 rpm protection: IP 54 (D), (E) Fire hydraulic oil: HLP 32 Bale weight: 150-400 kg capacitance: 1 m3; ready for use

Sheet thickness: 17,00 mm Bending length: 3000 mm Number of rolls: 3   MACH-id    5354 MAKE          Biko TYPE           3 HCD 3031 YOP             1996 SPECIFICATIONS Rolling width         3000 mm Rolling thickness 3x toproll Ø    17 mm Rolling thickness 5x toproll Ø     13 mm Rolling thickness prebending      10 mm Top Roll Ø         315 mm Bottom Roll Ø       295 mm Number of rolls     3 Rolling speed         0-6 m/min Control         Conventionel Number of driven rolls        3 Power          15 kW DIMENSIONS Length  &nb ...

Capacity: 600 t Folding length: 2700 mm CNC Brand: Delem CNC Model: DA 66 T Touch MACH-id    5453 MAKE        BAYKAL TYPE          APHS 37600 YOP             2014 SPECIFICATIONS Max. bending length        3700 mm Distance between column        3000 mm Max. pressing force       600 T Dis. Beam - Table         1000 mm Beam stroke           510 mm Adjustment X-Axis bac gauge        1000 mm Number of controlled axis       4 Control         Delem DA66  T TOUCH Power        45 kW DIMENSIONS Length        3700 mm Width          ...

Rotary vane vacuum pump Oelumlaufgeschmiert Manufacturer: Busch Type: R5 RA 0630 B Status: Waiting, very good condition, second-hand Warranty: 6 months suction capacity: 630 m ³/h Beriebsmittel: Mineral oil Accessories: inlet filter Delivery time: In stock; ready for operation

Manufacturer _ BONGIOANNI Model_ 1300 Features_ ARTIGLIO Carriage with 5 hydraulic clamping; Hydraulic Advancing; Chain Loading at 4 ways with hydraulic arms; Unloading Rollers System; Reverse Feeding Chain; Grinder manufactured by Vollmer.

Table diameter: 3100 mm Turning diameter: 3200 mm Turning height: 2000 mm Motor power: 0 HP/kW Positions ATC: 00   Positions APC: 0   MACH-id      5352 MAKE           BOST SA SPAIN TYPE             HYPRO 10 YOP              2000 SPECIFICATIONS Max. turning diameter Ø    3200 mm Table Ø       3100 mm Control         Conventionel Horizontal movement support        2000 mm Stroke ram left          1250 mm Stroke ram right        1250 mm Angle adjustment / ram swivable        30 ° Single column or double column        Double column Maximum turning height          & ...

NEW! 400 L capacity all stainless steel with stirring system conical bottom with centrifugal pump with water meter power : 1,5 kW dimensions (l x w x h) : 1.200 x 700 x 1.500 mm

Capacity: 240 t Folding length: 3100 mm CNC Brand: _Unknown / Other MACH-id    5342 MAKE        Baykal TYPE          APHS 3112 x 240 SERIAL      19099 YOP            2013 SPECIFICATIONS Pressbrake / Folding / Mech. / Hydr.   Pressbrake Hydraulic / Mechanical       Hydraulic Backgauge stroke X in mm       700 mm Power        18.5 kW Max. bending length        3100 mm Distance between column       2550 mm Max. pressing force        240 T Beam stroke        260 mm Table Width           90 mm Troth beam           410 mm Approch speed       ...

Capacity round maximum diameter: 310 mm Angle degrees maximum: 0 Capacity square: 0 mm Workpiece height: 0 mm Workpiece width: 0 mm Capacity rectangle: 0 mm MACH-id    5334 MAKE        Behringer    Germany TYPE          HBP 310 / 403 GA YOP            1995 SPECIFICATIONS Bandsaw / Circelblade / Automat        Automat Mitre cutting Angle L / R Degrees       L + R Cutting capacity 90 ˚ Ø   310 mm Cuttting capacity 90 ˚ Flatt      310 x 400 mm Cutting capacity 45˚ Ø       270 mm Cuttting capacity 45 ˚ Flatt       270 x 310 mm blade dimensions       5000 x 34 x 1,1 mm roller conveyor / push up / measuring Roller conveyor Cutting speed M/min ...

Capacity round maximum diameter: 320 mm Angle degrees maximum: 90 Capacity square: 320 mm Workpiece height: 0 mm Workpiece width: 0 mm Capacity rectangle: 320 mm MACH-id    5326 MAKE        BEKAMAK TYPE          BMSO 320 YOP            2008 SPECIFICATIONS Bandsaw / Circelblade / Automat        Bandsaw Automat Angle L / R Degrees        90 Gr. Cutting capacity 90 ˚ Ø       320 mm Cuttting capacity 90 ˚ Flatt      320 X 320 mm DIMENSIONS Length         2400 mm Width          2000 mm Height         1900 mm

Capacity: 40 t Folding length: 1000 mm CNC Brand: Cybelec CNC Model: DNC 880 MACH-id    5203 MAKE         Beyeler Swiss TYPE           RTS 40 / 1000 YOP             1987 SPECIFICATIONS Max. bending length       1000 mm Distance between column       1000 mm Max. pressing force        40 T Dis. Beam - table        380 mm Troth beam          350 mm Approch speed         110 mm/min. Working speed          10 Return feed         120 mm/min. Adjustment       X-Axis bac gauge   500 mm Number of controlled axis         3 Control   ...

Sheet thickness: 3,00 mm Bending length: 1500 mm Number of rolls: 3   MACH-id    5171 MAKE        Birlik TYPE         MSM YOP          2006 SPECIFICATIONS Control       Conventionel Hydraulic / Mechanical      Mechanical 3 or 4 roll       3 roll Maximum sheet thickness      3 mm Bending length       1500 mm Max. Rolling capacity Ø 2.500       3 mm Max. Prebending capacity Ø 2.500         2.5 mm Top Roll Ø     110 mm Bottom Roll Ø      110 mm Side Rolls Ø     110 mm DIMENSIONS Length        2400 mm Width       980 mm Height       1 ...

Torque test bench Manufacturer: BLM (Atlas Copco) Type: 3730M Built in 2001 All information without guarantee

Claw vacuum pump Compressing dry Manufacturer: Busch Type: Mink MM 1502 AV Engine: DS 400V Suction capacity: 500 m ³/h Discharge pressure: approx. 200 mbar (abs.) Accessories: inlet filter; Operating instructions Delivery time: Please enquire; ready for operation

Rotary vane vacuum pump manufacturer: Busch Type: R5 RA 305 D Voltage: 50/60 Hz 400V Nominal: 300m ³/h Discharge pressure: 0,5hpa(mbar) Status: Rebuilt Gewaehrleistung-12 months Includes: motor new storage, painting, electrical check Delivery time: In stock; ready for operation

Pump station VR 0632 B includes: 2 piece rotary vane vacuum pump Oelumlaufgeschmiert Manufacturer: Busch Type: R5 RA 302 D Beriebsmittel: Mineral oil Delivery time: In stock; ready for operation

Rotary vane vacuum pumps lubricated Manufacturer: Busch Type: RA 0100F Status: Demo Warranty: 12 months Delivery time: Please enquire; ready for operation

Roots pump booster pump Manufacturer: Busch Type: Puma WP 1000 D2 Status: used, tested A complete overhaul can be offered as an alternative. Then with 12 months warranty on the device.; ready for operation

Roots pump booster pump Manufacturer: Busch Type: Panda WV 4500b Suction capacity: 4100 m ³/h Vacuum: Vorpumpenabhaengig Warranty: 12 months Status: New, reserve unit; ready for operation

Manufacturer: Bush type: mink MI 1502 BP Motor: 18,5 KW; DS 400V status: used, without Warranty: 6 months Flow rate: 500 m ³/h discharge pressure: + 1,2 bar Accessories: additional intake filter (changed); Manual delivery time: approx. 1-2 where.; ready for operation

Sheet thickness: 100,00 mm Bending length: 600 mm Number of rolls: 3   MACH-id    5092 MAKE         Boldrini TYPE           PIR 600 x 100 YOP             1980 SPECIFICATIONS Hydraulic / Mechanical        Hydraulic 3 or 4 roll        3 roll Bending length         600 mm Max. Rolling capacity Ø 2.500        100 mm Max. Prebending capacity Ø 2.500        70 mm Top Roll Ø       500 mm Side Rolls Ø     350 mm Working speed M/Min.    2.5 + 4 M/min .DIMENSIONS Length         3500 mm Width          1700 mm Height          2500 mm

Bush two stage pumps stand: data pump status: type: BNV 1000 A Vacuum: mbar (abs.) 0.005 Data backing pump: Type: NC0400B suction volume: 400 m³/h Discharge pressure: 0, 05mbar (ABS) Data booster: Type: WV1000B Suction power: 1000 m ³/h Discharge pressure: 0, 005mbar (ABS) Condition: tested, serviced (good condition) Includes: vacuum pre-filter, oil filling Warranty: 3 months; ready for operation

Rounds: 162 mm Squares: 60 mm Flats: 0 mm Flats on edge: 0 mm Angles: 0 mm (1) horizontal / (2) vertical: 2   MACH-id       5012 MAKE            BPR Italia TYPE              Z - 402 YOP                 2017 SPECIFICATIONS Power          1.1 kW Horizontal / Vertical / or H + V       H + V Shaft Diameter ø       40 mm Roll diamter ø     162 mm Shaft length     94 mm Capacity IPN       60 x 10 x 600 mm Capacity HEB       60 x 60 x 6 x 700 mm Capacity Tube walltickness x Ø       60 x 2,9 x 600 mm Capacity Flatt         60 x 10 x 600 mm Hydraulic / Mechan ...

Rounds: 530 mm Squares: 0 mm Flats: 150 mm Flats on edge: 0 mm Angles: 0 mm (1) horizontal / (2) vertical: 1   MACH-id    5005 MAKE         Boldrini Italia TYPE           BSA 36 YOP            SPECIFICATIONS Power        12 kW Horizontal / Vertical / or H + V    Horizontal        Shaft Diameter ø       235 mm Roll diamter  ø     530 mm Shaft length      360 mm Resistance moment Cm     3166 Cm3 Capacity IPN     220 x 4500 mm Capacity HEB      160 x 2500 mm Capacity Tube walltickness x Ø  160 x 5 mm Capacity Flatt      150 x 40 mm Hydraulic / Mechanical      Mechanical Working  ...

Cutting capacity round / square 90°: 255 mm / 210 x 210 mm 90° flat cutting area: 310 x 210 mm Cutting capacity round / square 45 ° R: 220 mm / 210 x 210 mm Section flat 45 ° r: 220 x 200 mm Cutting capacity round / square 45 ° L: 230 mm / 200 x 200 mm Cutting capacity 45 ° L: flat 230 x 200 mm Cutting capacity round / square 60 ° R: 135 mm / 135 x 135 mm Section flat 60 ° R: 135 x 135 mm Working height: 930 mm Band saw blade dimensions: 2750 x 27 x 0,9 mm Cutting speed: 35 / 70 m / min Coolant pump: 100 W S1 motor power output 100%: 1.5 kW Motor power S6 40%: 2.2 kW Voltage: 400 V Machine dimensions (L x D x H): 2000 x 1250 x 1900 mm Approximate weight: 350 kg Features: -Professional band saw for General workshop use, fitters... -For cutting of hollow profiles and full materials, stainless steel, tool steel,... -Twist-free, heavily dimensioned saw frame mad ...

Diameter: 2.0 m, width: 500 mm, trough: approx. 2,000 x 1,000 mm, capacity: 10 tons / h (0-4mm), E - motor with 3.6 kW

Capacity: 35 t Folding length: 1200 mm CNC Brand: Delem CNC Model: M - 51 MACH-id   3969 MAKE        Baykal TYPE          APH YEAR         20.. SPECIFICATIONS Controll   Delem M-51 Pressbrake / Folding / Mech. / Hydr.   Pressbrake      Hydraulic / Mechanical     Hydraulic Bending length     1200 mm Distance between column   1070 mm Press force    35 Ton Throat    410 mm Stroke    60 mm Die height    470 mm Backgauge stroke X in mm500 mmNumber off controlled axis3Power4 kWDIMENSIONSLength1250 mmWidth1270 mmHeight2150 mmBaykal CNC Pressbrake

No. 2630: 1 gebr. CNC vertical milling machines and drill / jig boring machine Fabr. BURKHARDT & WEBER Type 120 NCW HYOP Retrofit / overhauled in 2000 with HEIDENHAIN TNC 426 PB ARB.-ber.: 1250 x 630 x 560 mm Power: 44 kW Accessories: fixed table / table 1200 x 710, additional table top height 200 mm,. 36-Fach tool changer magazine, coolant system / coolant. HEIDENHAIN - probe / probe TS 630 -the pictured magnetic clamping table is not included! -Miscellaneous: spindle ISO 50, revs / speed range 30-3000 min-1 (with optional high-speed spindle) Max torque / torque 522 NM Rapid / rapid feed 10 m / min maximum distance spindle nose - table surface 725 mm Projection spindle Center - stands 800 mm. Space requirements / measurements approx. 5 x 5 m, weight / weight approx. 12 to The engine was overhauled in 2000 General / retrofitted and modernized with digital drive ...

AUTOMATIC TENONER type BALESTRINI PICO volt. 380/50 working conditions : Excellent for chairs

Side channel blowers for silos Becker SD 6 2.4 kW, 220 / 380 V, 2880 / min 4.6 cubic meters / min = 276 cubic metres / hour, 3000 mm WS, good condition. Width 40 cm, length 75 cm, height 45 cm Weight approx. 40 kg. â?¬150 pickup in 76829 Landau, or freight shipping

BERNARDO BANDSAW TYPE HBS 275 -2 Snelheden -Ver STeK -Zaagdruk hydraulic regelbaar -Snelspanklem -Koeling -Afslag automatic -Zaagblad 2480 x 27 x 0,9 mm -Noodstop -Documentatie -400V PRICE is plus VAT DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

System: Used decanter / centrifuge Manufacturer: Baker Hughes Model: full coat screw centrifuge Type: CP 3044 . Nr: 6299 Year of construction: 2001 Höchstzul. Speed: 3600 I/min Inner diameter drum: 448 mm Drum wall thickness: 11 mm Drum material: 50-LF2 Max capacity: 174 dm3 Zul.Dichte 1.5 kg / dm3 Total mass: 3880 kg

Counter-steering machines Boley, partly incomplete

Technical description: -Trimming unit -Milling unit -Fine trimming unit -Scraper -Buffing unit

Thermoforming machine TLT 2600 PP-film max. 260 mm Usable web width max 245 mm ( strip length max. 120 mm ) Strip configuration 2 lane , across Indexing max. 212 mm Depth of draw max. 10 mm Film speed max. 13 m/min Cutting die max 300 cycle/minute (or 600 blisters/min) Forming station max. 110 forming cycles/min Including inspection camera Leatus

Table belt grinding machine Bürkle L x W x H: 3.5 x 1.7 x 1.8 m Built in 1963 Weight approx. 650 kg The machine is in good condition, ready for operation. Changes, errors, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Stock # 5147 Ways Valve 4/2 Manufacturer Bosch No 0810 001 408 used

TWIN DISC GEAR BOX RATIO 4.56:1 SERIAL NO 7S-957

Printing plate bending for Heidelberg SM 52 Beil PB-S 52; good condition; cleaned and tested; Stand-up device; suitable for printing plates Heidelberg SM 52. Plate bender for Heidelberg SM 52 Beil PB-S 52; good condition; clened and checked; used for Heidelberg SM 52 plates.

used cone round wherker Benier type Allround with adjustable angles for small and large weights.Kegelrundwiker is with heating and oiling.The cone round wherk is immediately available in the warehouse in Bielefeld. We will be happy to send you further pictures and details on request. Weight range from 100-1300 grams up to 4500 pieces / hrs ( depending on the dough weight) with leakconveyor belt with heating with oiling Built in 2005 Teflon coated cone and wire cara Dimensions: Height: 150 cm Width: 134 cm Depth: 132 cm

used Benier brotteig precursor with adjustable wits completely in stainless steel.The machine is immediately available in the warehouse in Bielefeld.Further used bakery machines please see the catalogue on the right we have more than 700 machines in stock in Stock. Built in 2002 400V / 50 Hz Stainless steel cladding with 2 blowers Scrapers are adjustable checked and cleaned Condition "good" Dimensions: Height: 150 cm Width: 220 cm Depth: 110 cm

unused stainless steel boilers for spiral kneader boku type SK 38.We have 8 boilers immediately available in stock. Request delivery or shipping costs by postcode. Boku boiler/ vat for spiral kneader SK 38 Stainless steel Diameter: 51cm Height: 35cm Condition: New

CNC press brake make BEYELER type MZ 30 / 1550Machine -No: 59009 / 2817 built in 1990Technical specifications:Press force: 30 tBending length: 1550 mmDistance between columns: 1400 mmTable width: 80 mmStand projection: 205 mmInstallation height: 340 mmTable height: 890 mmInfeed speed: 130 mm/sec.Working speed: 11 mm/sec.Stroke:140mmDimensions L x W x H: 2150 x 1250 x 1750 mmTotal power requirement: 3.0 kWWeight approx.: 1.7 tWith- Defective control Euro II- cpl. upper and lower toolused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

<b>Features:</b> Used telescopic belt conveyor Condition: fully functional with traces of usage Ideal for fast material transport Professionally dismantled and packaged Color: Blue Price per piece <b>Technical data: Manufacturer: Budde Type: TGF 02 with hydraulic height adjustment Condition: Good (used) Colour: blue Built: 2006 Total length (retracted): 5,000mm Total length (extended): 11,500mm Total width: 1,240mm incl. control cabinet Total width: 990mm Belt width: 600mm Belt type: Smooth <b>Telescopic belt conveyor</b> The telescopic belt conveyor is ideally suited in the picking zone to interlock machines or workstations and to optimize the internal operation. During transport, the telescopic belt conveyor can convey sensitive and differently sized containers, boxes or other packaging and article units to the delivery  ...

Horizontal band saw machine make BEHRINGER type HBP 400 AMachine -No: 182171 built in 1982Technical specifications:Working area around: 400 mmSquare working area: 400 x 400 mmstepless cutting speed: 16 - 100 m / min.Material feed length: 800 mmSaw band dimensions: 5800 x 38 x 1.3 mmDrive motor: 5.5 kWTotal power: 7.5 kWWeight approx: 3200 kgDimensions approx: 3000 x 2450 x 1850 mm:with- chip conveyorused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

CNC controlled horizontal automatic band saw make BEHRINGER type HBP 220 A CNCMachine -No: A7-46485-187164 built in 1987Technical specifications:Cutting area round 220 mmCutting area square 350 x 220 mmCutting speed stepless 20 - 140 m / minSaw band dimensions 3720 x 32 x 1.1 mmDrive power 3.0 kWDimensions 2400 x 800 x 1500 mmWeight approx 1000 kgWith- CNC Control- Enter the data for length and quantity- Chip conveyorused, in very good conditioncontrol defective - sale as spare parts dispenser or rebuildspecial pricePrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools