b b used for sale

front roll 560x1500 for mixing mill Buzuluk 14823

rear roll 560x1500 for mixing mill Buzuluk 14823

Hull engine in replacement Scania DC13-071A without turbo,EGR cooler+hoses,PDE's,controlr installed in Kleemann crushing plants. Price only on request

HYDRAULIC PUMPS - 3Nos MAKE: KAWASAKI HEAVY Ind. JAPAN TYPE: BZ732S215LH REGISTERED TYPE: R3041L-2SOL

Britsh Rema Classifier Mill

MAKE:BBC TYPE:VTR 320U NO 82230 SPECIFICATION:Z8 S439 IV 178 N. Max:17500RPM TEMP:650 deg.C One Inlet

MAKE:BBC TYPE:VTR354A-32 SERIAL NO.:396879 T MAX:580°C N MAX:365 SPECIFICATION:V 03131 B 061 H 04111 W 54110 E 03318 U 032 L 181 T 111

Side Channel Vacuum Pump, Side Channel Blower, Vacuum Pump, Busch Samos Si 1150 E1 Manufacturer: Busch Type: Samos SI 1150 E1 Condition: New, Tested Weight: 360 kg Year: 2020 Overall dimension : 2100 x 1360 x 1000 mm Housed in a soundproof enclosure, made of stainless steel. Pump Performance: Max. differential vacuum: -185 mbar, 828 mbar Max. differential pressure: +155 mbar, 1168 mbar Airflow rate: 1200 m?/h Electrical Data: 11/12.6 kW, 400 V, 50/60 Hz, 26-46 A

ROOT START REDUCER LOG END REDUCER60 m / min for logs with diameter 60 cm - 4 logs / min at roller conveyor feed rate 30 m / min for logs with diameter 60 cm - 3 logs / min Maximum removal 200 mm Max log diameter 700 mm measured 1500 mm measured 1500 mm from the root and length min 3.2 m max 6.2 m Number of cutting tools 30 Cutting tool width 60 mm Cuttin motor 37 kW, 1500 rpm

Key data: 650 KG, 4000 mm, 4000 mm

Data: - H : approx. 400 cm - T : approx. 148 cm - L : approx. 400 cm - Cantilever arms : approx. 120 cm incl. 8 cm deflector at the front - Axial dimension: 130 cm - NEW GOODS immediately from stock. - 650 kg load per arm - 1950 kg load per stand - Stand in RAL7016. - Cantilever arms in RAL3000 - Arms are hooked. - Arms adjustable in 100 mm increments. - Levels: feet + 3 storage levels (4 storage levels) The stands from this shelf set are prepared free of charge for a possible conversion to double-sided use. Advantages of a hooked-in cantilever arm, see illustrations. Shelf consists of : - 04 x stand, incl. footboard approx. 400 cm made of IPE180. - 12 x cantilever arms approx. 120 cm from profile 10 cm x 4 cm. - Including all necessary fasteners and screws. Price: 1995,00 € Net 2374,05 € Gross You will receive an invoice with VAT. Accessories such a ...

Key data: 650 KG, 4000 mm, 4000 mm

Data: - H : approx. 400 cm - T : approx. 148 cm - L : approx. 400 cm - Cantilever arms : approx. 120 cm incl. 8 cm deflector at the front - Axial dimension: 130 cm - NEW GOODS immediately from stock. - 650 kg load per arm - 1950 kg load per stand - Stand in RAL7016. - Cantilever arms in RAL3000 - Arms are hooked. - Arms adjustable in 100 mm increments. - Levels: feet + 3 storage levels (4 storage levels) The stands from this shelf set are prepared free of charge for a possible conversion to double-sided use. Advantages of a hooked-in cantilever arm, see illustrations. Shelf consists of : - 04 x stand, incl. footboard approx. 400 cm made of IPE180. - 12 x cantilever arms approx. 120 cm from profile 10 cm x 4 cm. - Including all necessary fasteners and screws. Price: 1995,00 € Net 2374,05 € Gross You will receive an invoice with VAT. Accessories such a ...

Key data: 550 , 67 , 28

Type: 55 M Built: 2003 Control: Procan MD Closing type: Hydraulic Technical data Closing force: 550 kN Tie bar distance H x V: 360 mm x 335 mm Plate size: 565 mm x 540 mm Tool installation height: min 250 mm Opening distance max.: 400 mm Plate spacing max.: 650 mm Screw diameter: 28 mm Lifting volume / spray weight (PS): 73.9 cc / 67 gram hp Spray pressure: 2778 bar General data Engine: 11 kW Heating: 9.6 kW Operating hours: on request Dimensions L x W x H: 3.3 m 1.8 m x 1.3 m Weight: 2430 kg Accessories Screen text: German Manual: Yes Additional equipment: Core train: x2 Robot interface

17.10 m Bito Pallet Rack With a bay length of 2700 mm, the Bito pallet rack is designed in such a way that up to three pallets can be placed lengthwise in one field. In order to easily assemble the shelf with different compartment spacing, the individual compartments are adjustable in height in a fine grid of 50 mm. The trusses are provided with a gentian blue plastic coating and equipped with captive safety hooks. For optimum corrosion protection of the racks, the surfaces of the support frames are glossy galvanised. Specifications: Manufacturer: Bito Shelf height: 5000 mm Shelf depth: 1100 mm Shelf length: 17100 mm Span: 2700 mm Storage direction: Longitudinal storage Number of fields: 6 max. pallet weight: 600 kg Prop Type: P2 Euro pallet storage capacity: 72 Number of compartment levels: 4 (incl. floor parking space) max. shelf load: 1800 kg Max. bay load: 5400 k ...

The scope of delivery includes: Heavy-duty anchors, HST2 Purchase quantity: 25 pcs. Manufacturer: Hilti Design: Carbon steel galvanized Approved for: cracked concrete Through-hole mounting: + push-in mounting Diameter: M12 Drill hole Ø depth: 12 x 88 mm Nominal anchoring depth: 80 mm Effective anchoring depth: 70 mm Dowel length: 105 mm Clamping thickness: 10 mm Weight per piece: 0.080 kg Weight per box: 2,480 kg Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. Any additional transport or shipment of this item is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Machine Type: Core Sand Mixer Manufacturer: Baumberg Type: AMF60 Year of Make: 2010 Condition: used / in working order Offer will only be sent if a complete imprint is provided Price 1.750 Euro incl. 19% VAT Fixed Price Location Warstein , Germany Reference M-BAU-0425 DESCRIPTION We offer you a used core sand mixer from the manufacturer Baumberg. Weight 480kg Flow rate 1.44 m3/h Timer would have to be renewed. But it also works that way. Available now. Our offer is aimed at tradespeople who are registered within the meaning of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and conditions of payment. Errors in the descriptions and offers are reserved!

LARGE FORMAT PRINTER AGFA JETI 3324 SL BASE SOLVENT RTR (roll to roll) 6C (PRINTS ON TARP, CLOTH BANNER & VARIOUS MATERIALS) M. No.: 3.324287 • Large format printer with solvent ink • Solvent based ink: 6 colors (4CMYK+2CM light) • Printing width: 3.2 M (3200 mm) • 24 high-performance Spectra piezoelectric printheads • 600 dpi (2-sided printing) • Max. roll weight up to 230 KG • Up to 64 m2 / h • Jeti software RIP (E9YC4000) Equipment / additional information: • Carrier rewind unit: Jeti 3M Solvent (E9WF2000) • Retro Heater Unit (E9ZZL000) • Jeti Spectra head 24 SL PH 3324 (E91UE000) • Vinyl Loader (E9WKB000) • Vinyl Roller Assy (E9ZUA000) • Spare parts kit for Jeti 3324 (E9V4C000) • Backlit camera (E9Z2P) • Complete set of new filters (12 pieces) • 10 meters of new hoses also included • Three sets of new connectors • Original ...

Product number: 1930B Type: BR4500/600 Serial number: 939 Belt width: 600 Frying length: 4500 mm Heating: thermal oil Power: 3 x 380V, 50Hz, 10kW Dimensions: 7400 x 1900 x 3150 mm Weight: 2750 kg Hold down belt, sediment removal, circulation pump, electric hoists, oil level control Prepared for CO2 fire extinguisher

Make:IHI, BBC Type: VTR 400 Two Inlet

The BATTENFELD BA 600 CDC injection molding machine was built in Austria in 2002. It is equipped with Unilog B4 control. It has a closing force of 600 kN forms. The screw diameter is 33 mm and the injection volume is 99 cm3. The machine has plates for mounting injection molds with dimensions of 511 x 511 mm, and the clearance between the columns is 320 x 320 mm. The injection molding machine is equipped with a receiving robot, hot runners, a conveyor belt for collecting moldings, four pillows, a string of cores and technical documentation. Technical parameters of the BATTENFELD BA 600 CDC injection molding machine – control: Unilog B4 – dimensions of tool plates: 511 x 511 mm – clearance between columns: 320 x 320 mm – tool height, min. : 150 mm – opening path: 511 mm – injection pressure: 2022 bar – injection volume: 99 cm3 – injection weight: 90 g – screw  ...

Table clamping area: 300 x 500 mm Travel x/y/z: 420/300/250 mm Spindle holder: BT 30 ISA small/gr. distance table/spindle: Spindle speeds: approx. 10 - 10000 rpm Feeds: approx. 5 - 10000 mm/min Rapid speed: x u. y/z 25/20 m/min Spindle drive: 7 kW electr. Connection: 400 V, approx. 9 kVA kW Space requirement: 2650 x 1400 x 2450 mm Weight: approx. 2800 kg

BHK-TECH MW50-2V Microwave Oven Manufacturer: BHK-TEC Microwave oven type: MW50-2V Number of magnetrons: 32 Voltage: 400 V 50/60 Hz Connection: 70 kW Fuse: 250 A Frequency: 2450MHz Compressed air: 6-10 bar Year of manufacture: 2016 Emissions Sound pressure: 80 dB Frequency: 50/60 Hz Exhaust air: 2 x 8500 m³/h Supply air: 4 x 3500 m³/h Supply air connection: 2 x 346 mm ø Exhaust air connection: 1 x 465 mm ø Dimensions and weight Microwave oven: (LxDxH) 3735 x 2373 x 4756 mm Min. room height: 5000 mm Usable interior: (LxWxH) 3100 x 1200 x 1200 mm Max. permissible Roller conveyor load capacity: 3000 kg Max. permissible Weight; 9000 kg Curb weight: 6000 kg Control cabinet: (LxDxH) 3800 x 520 x 2250 mm Weight: 700 kg The machine is in absolute new condition The machine was never used Original price 300.000 € More stoves in other sizes - new an ...

Make: BBC Type: VTR 320U Serial Number: 82230 Specification: Z8 S439 IV 178 N. Max: 17500RPM TEMP: 650 deg.C One Inlet

Intelligent Gas Flow Meter, 5860S/BC1GA0BA1B1, Brooks Instrument, new We have set the lowest price for the new part on the market. We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece there is still a great discount. As good as new in original packaging! The part was bought from a spare parts warehouse of a company and has never been in operation, is completely as good as new and in its original packaging. - High-quality mass flow meter for gas - Max. 300 bar Functional guarantee! We cannot provide a conventional warranty and warranty for second-hand parts. Since we know that the device works, we give you a functional guarantee when you purchase it. If the device does not work within 6 months of purchase, you can return the goods and we will refund the purchase price.

General- Compound slides with turning/milling spindle as integrated spindle motor, with hydr. locking at turning acceptance HSK-63A DIN 69893 - Y-axis ± 125 mm - B-axis ±120° with pneumatic locking - Tools magazin disc with 1x24 positions - Absolute direct gauging system in the X, Y, Z linear axes - Coolant pump 12 bar; 23l/min - Cooling system for spindle motor, turning/milling spindle, B-axis torque motor; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways500 mmMax. Turning Length1200 mmBar diameter max.65 mmTurning diameter500 mmWork spindle (left)Diametre of spindle nose170h5 mmSpindle noseFlat flange Spindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)25 kWDrive power (40% DC)32 kWSpeed range- 5000 rpmTorque (100% DC)280 NmMax. torque (40% DC)360 NmTurning-milling spindleSpindle taperHSK-A 63 DIN 69893 ...

Bicker MPI-810H

Used spiral kneader with extendable tank car BOKU, type: SK 160 -bakery condition - 2 pieces of kneader and 4 pcs. boiler available - for 160 kg dough or 100 kg flour - Kneading arms interchangeable - Condition good, ready for immediate use The company DIOSNA has taken over the area of BOKU. BOKU dough kneaders are still made. THE service and spare parts offer DIOSNA. Sightseeing and test run are possible by arrangement.

TECHNICAL DATA: Max oscillation length mm: 100 Max depth of slots mm: 80 Spindle center distance min mm: 84 / max 1170 Spindle rotation rpm: 6.000 / 12.000 Processing: double sided Weight Kg: 2250

Bühler trough chain conveyor new, still packed in wooden boxes. 18 pieces trough chain conveyor, different lengths and outputs 10 to 60 t/h immediately available Mob. +491715213204

Bühler trough chain conveyor new, still packed in wooden boxes. 18 pieces trough chain conveyor, different lengths and outputs 10 to 60 t/h immediately available Mob. +491715213204

Bread intermediate fermentation cabinet Glimek 8 row / bread plant -Fermentation cabinet stainless steel clad -8 row -completely set up immediately available in the warehouse