b b used for sale

Manufacturer: Protool, Type: Bohrm. DRP 8 E, Drilling engine kW: 0,460, FREE TEXT: mit Ständer,

Manufacturer: Bürkle Vertreibetstationen, Type: VBS, Work piece width min-max mm: 400, Number of brushes: 2, Brushes straight: yes, Working hight mm: 10-200, Power per brush kW: 0,5, rotations controlled: regelbar, Feeding speed min-max m/min: ca.8-15, Vaccum conveyor belt: no, FREE TEXT: Bürstenträger sind nicht dabei/Transportbandlänge 1600 mm,

Manufacturer: Brandt, Type: KS 23, Year: 1988, Min-max edge material mm: 0,5-12, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 10-50, Edgeband height max mm: 55, Min-max feed m/min: 12, Premilling: no, Coil magazine: yes, Strip magazin: yes, Min.-max. batten magazine mm: yes, Mitre stations: yes, Bevel milling: yes, Corner tracing type: no, Radius scraper: yes, Flat scraper: yes, Bonding part EVA: yes, Edge sanding: yes, Year :1988

Manufacturer: Tillecke Bürsten schleifmaschine, Year: ca.1980, Monting of the machine: 1 Bürstenaggregat, Number of units: 1, Working widht mm: 1300, Through running hight max mm: ca 80, Diameter of brushes: 200, Number of rotations controlled: yes, Units mounted upright: yes, Through running hight max mm: ca 80, Axle-diameter: ca.50, kW output motor: ca.2, Vacuum belt: Haftteppich, Feeding speed continous adjustable: 8-15, FREE TEXT: Flextrim Schleifbürstenbesatz, Year :ca.1980

Manufacturer: Bargstedt, Type: Transportband, Year: ca1995, Control: hand, Working length mm: 6500, Working widht mm: 800, Total hight mm: 950 Verstellbar, Engine power kW: 1,5, Feeding speed max m/min: 8-20, Feeding speed continous adjustable: yes, Belt control: no, Working hight adjustable mm: yes, Year :ca1995

Manufacturer: Brandt, Type: KD 99, Year: 1998, Control: Homatic, Min-max edge material mm: 0,4 - 3,0, Work piece width min-max mm: 62, Min.-max. workpiece length in mm: 160, Min.-max. workpiece height in mm: 60, Edgeband height max mm: 62, Premilling: yes, Bevel milling: yes, Corner tracing type: yes, 4 Motoren: yes, Nuten : yes, Radius scraper: yes, 4 Motoren: yes, Compressed air bar: 6, Machine lenght mm: 8740, Noise enclosure: yes, Rückführung Typ: yes, machine ready for demonstration: yes, Year :1998

Manufacturer: Brandt , Type: KS 25, Year: 1991, Min-max edge material mm: 0,5-3,0, Work piece width min-max mm: 60, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 10-50, Edgeband height max mm: 55, Min-max feed m/min: 14, Premilling: no, Mitre stations: yes, Pre-milling: yes, Bevel milling: yes, Flat scraper: yes, Bonding part EVA: yes, Top pressure belt/roller: Rolle, Werkstückunterstützung: yes, Freiplätze: keine, Year :1991

Manufacturer: Koch , Type: BLG, Year: 1992, Control: hand, Program-controlled: yes, Software: 300, Work piece width min-max mm: 200-2500, Min.-max. workpiece length in mm: 10-60, Program: yes, Lochraster: alle 2, Drilling engine kW: 60/80, Working range max mm: 2 von hinten, Drilling supprt from bottom: 2, Drill supports from behind: 7, Work piece refeeding: yes, Taktleitung min: 1, Dovel insertion: yes, Overhauled on: alle Bohrgetriebe drehbar 360 Grad, Year :1992

Manufacturer: Bodenförderband, Year: ca.1980, Working length mm: 35.000, Working widht mm: 1200, Total hight mm: ca 100, Year :ca.1980

Manufacturer: Bütfering, Type: Profiline SCR/RRR, Year: 2007, Sanding width mm: 1350, Sanding hight mm: 3-160, Number of sanding belts: 3, Sanding belt dimensions: 13702620, Rollers: 3, Rubber roller: 1, Steel roller: 2, Shore roller 1: 70 , Bürstenaggregate: 1, Band 1 Leistung kW : 37, Band 2 Leistung kW : 30 , Band 3 Leistung kW : 22, Continous adjustable feeding speed m/min: 4-20, Transportbandantrieb kW: 7, Constant table hight: yes, Vacuum table: yes, Weight in kg: ca. 2020, Year :2007

Manufacturer: Bauerrichter, Type: WRM 4 / S-E, Year: 1997, Number of units: 4, Working widht mm: 800, Through running hight max mm: 60, Diameter of brushes: 400, Number of rotations controlled: 250 - 2500 U/min, Units mounted inclined: 4, Fast exchange device: yes, Through running hight max mm: 60, Polishing width mm: 800, Engine power - kW: 4x 4 kW, Vacuum belt: yes, Exhaust diameter mm: 2 x 200, FREE TEXT: mit Oszillation, Year :1997

Manufacturer: Bütfering, Type: Vega 213 CE, Year: ca.1995, Sanding width mm: 1300, Sanding hight mm: 120, Number of sanding belts: 2, Sanding belt dimensions: ca.2120 X 1350, Table hight adjustment by engine: yes, Rollers: 1, Rubber roller: yes, Band 1 Leistung kW : 12 gleich und gegenlauf, Band 2 Kombiaggregat Walze/Schuh: 15, Table hight adjustment by engine: yes, Continous adjustable feeding speed m/min: 6-20, Feeding engine kw: 1,2, Intermediate sanding of lacquer: no, Vacuum table: yes, Segment sanding shoe: yes, Bürstaggregat : yes, Durchmesser/ Bürstenbesatz: 125, Year :ca.1995

Manufacturer: Biesse , Type: Stream B1 S3, Year: 2005, Control: NC 1600, Min-max edge material mm: 20, Work piece width min-max mm: 65, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 60, Min-max feed m/min: 25, Min.-max. batten magazine mm: 20, Bevel milling: yes, radius milling: yes, Radius scraper: yes, Buffing unit: yes, Year :2005

Manufacturer: Brünninghaus Kartonverklebeautomat, Type: XL.46 PA, Year: 1996, Control: hand, Carton size min. L x W x H mm: 120 X 120 X 150, Box dimensions max. L x W x H mm: 650 X 640, Year :1996

Manufacturer: Boere , Type: BKS 900 / BBBg20/2, Year: 1985 / 1991, Monting of the machine: Walze Schuh + Walze/Schuh/Bürste, Double sided sanding line: yes, Sanding width mm: 900, Sanding hight mm: 150, Number of sanding belts: 4, Continous adjustable feeding speed m/min: 5 - 25, Rubber roller: yes, Shoe unit: yes, Shoe unit: yes, Schleifbänder unten: 2, Brushing unit: yes, Year :1985 / 1991

HBM Wotan WMO B105, CNC control system Siemens 820M

Various ZKG ZKGs fermentation tanks storage tanks pressure tanks beer, jacket cooling, cooling jacket, year of construction 2004, net volume approx. 45 hl, 4500 liters, 1.5 bar. Various Numbers of CCTs, Storage Tanks, BBTs, Bright Beer Tanks, Cooling jacket, Year: 2004, Net Volume approx. 45 hl, 4500 liters, 1.5 bar.

Bread line Kemper Imperator + bucket elevator + round and long moulder - Bread plant from Kemper - with Kemper Imperator dough divider - with Kemper bucket elevator - with Kemper round and long mould SU-S

Bread plant Kemper BM51 Imperator intermediate bread proofer Bread plant Kemper consisting of: -1 Kemper Imperator II-MB Dough Divider Weigher -1 W&P CCR59 Conical Rounder -1 intermediate bread proofer 8-row -1 Kemper Long Moulder

Key data: 1340 mm, 150 mm

SPECIFICATIONS: Machining width: 1340 mm Processing height: 150 mm Steel calibration roller: Ø 200 mm Sanding belt length: 2100 x 1400 mm Installed power: 17 kW

Baguette - Long Roller Sinmag Model: SM2-380 Baguetto Capacity: min. 50 - max.1200 g depending on TA with felt ribbons for soft doughs Rolling width: up to max. 750 mm Outlet plate extendable DGUV V3 tested Connection: 400V, 550 Watt, 16A-CEE plug Dimensions: 995 x 690 x 1595/1650 mm, WxDxH Insertion height 1480 mm Weight 258 kg NEW Machine 24 Months Warranty + Spare Parts Service Option: Leasing & Rental Service Maintenance contract E-Box Service Package Mobile undercarriage Guided tour for loaf of bread Delivery Instruction & Commissioning More TOP machines in stock for you!

used Kettle for spiral mixer Boku 240 extendable, overhauled, for 240 kg dough, bowl depth approx. 55 cm, diameter outside approx. 100 cm, 2 pieces in stock

Machine Details Stock-No. 1105-04064 Type of machine Band Saw - Automatic - Horizontal Make BEHRINGER Type SLB 240 A Year of manufacture 2016 Type of control conventional Storage location HAGUENAU FRANCE Country of origin Germany Delivery time immediately Freight basis free loaded truck, ex stock HAGUENAU Technical details cutting diameter 260 mm saw band length 4100 x 32 x 1.1 mm cutting width 260 mm feed length 600 mm range L-W-H 2.5 x 2.2 x 1.6 m Weight of the machine approx. 2.2 t Additional information automatic band saw Chip Conveyor hydraulic pump good working condition

We are selling here a bone saw from the manufacturer Berkel, type BS 1750 RN in a very good used and functional condition. The machine runs on 400 volts, 1.1 kW, identical to Mado MKB 649, completely stainless steel, table 55x50 cm, workshop tested, immediately ready for use, dimensions W/D/H 55/50/90 cm, others on request.

Height-adjustable powered roller conveyor, suitable for pallets and other large packages. The conveyor belt can be adjusted in height and is driven by two motors to distribute the load evenly. See the last image for all dimensions of the conveyor. - complete solidworks and STEP- files available - The powered roller conveyor is divided into two sections, and the division of these sections can be adjusted as needed. - The machine has been used in combination with a bag in box filler. The roller conveyor has been lightly used but is in good and working condition. Please contact for more infromation.

Behringer HBP 320 Depth of throat: 320 mm Sawspeed: 16 > 100 m/min Length of band saw: 4860 x 32 x 1,1 mm Power needed: 3 kW Length : 2500 mm Depth : 2400 mm Height: 1600 mm Weight: 2400 kg

Behringer HBP 400 Depth of throat: 400 mm Max height of workpiece: 400 mm Length of band saw: 5800 x 38 x 1,3 mm Power needed: 5 kW Length : 2900 mm Depth : 2500 mm Height: 2100 mm Weight: 2,7 ton

cap round: dia 260 mm cap square: 260 x 260 mm Depth of throat: 260 mm Max height of workpiece: 260 mm Sawspeed: 17 > 120 m/min Length of band saw: 4100 x 32 x 1,1 mm Power needed: 5 kW Length : 2300 mm Depth : 2300 mm Height: 1400 mm Weight: 2 ton

The GM 25 S unit can be adjusted to your performance data. The blower stage has been completely overhauled. If you have any questions, please feel free to contact us.

with water filter (collection basin)

Type: 117S Number of rolls: 3 rolls Roll capacity cold: 2050 x 4 mm

Burners for Miwe stoves Please take data from the nameplate. Burner removed immediately after the furnace was switched off Burners cleaned and technically checked no guarantee and warranty

WMW Union BFT 80/2 X: 1000 - Y: 1000 - Z: 1600mm Spindle Dia: 80 mm Spindle bore: ISO 50 Table dimensions : 1100 x 1000 mm Table longitudinal travel (X-axis): 1000 mm Cross travel Table/colom (Y-axis): 1000 mm Height travel head (Z-axis): 1600 mm Max travel spindle: 700 mm Power on spindle: 1250 rpm Power principal motor: 8,5 kW Weight: 11 ton

Continuous Butter Churn Westfalia Make : Westfalia Model : BUC 1500 Capacity : 1500 Kg per hour Cream Tank included Controls : VFD Drives , Touch Screen PLC Plate Heat Exchanger Water Valves , PHE, Control panel Butter milk Tank Main Control Panel Condition : Excellent Location : DAIRY MACHINERY UK

Butter Bulk Packer Simon Freres Make : SIMON FRERES Model : KM Capacity : 2500 kg per hour Filling Capacity : 5-25 kg in boxes Semi automatic box inverter Inlet Hopper Twin Screw Feeder Hopper Capacity : 100 kg New Controls Condition : Excellent Location : Dairy Machinery UK

Roll wrapping and settling Trima BA1000 - Manufacturer: Trima Triebeser Maschinenbau GmbH - Type: BA 1000 - Year of construction: 2014 - Voltage: 400 Volt / 50Hz - Fuse: 16A - Power: 1.9 kW - Weight: 680kg - External dimensions approx. 220x105x215cm WxDxH

Wiesheu BO5 Dibas In-store Baking Oven Convection Oven with Proofer - Manufacturer: Wiesheu - Type: BO5 Dibas 2 - Year of construction: 2008 - Number of editions: 5 - for baking trays à 60x40cm - Door lock: electric - Heating: electric - Electrical voltage: 400V 3/N/PE - Electrical connected load: 9.6 kW - Mains frequency: 50 Hz - Convection oven More pictures and information on request. Shipping by freight forwarder possible.

Voltage: 24V Rated Power: 15 kW Rotation Direction: Clockwise (CW) Number of Teeth: 17 Flange Diameter: 90 mm The information on spare parts is indicative and does not guarantee accuracy.

Key data: 4 , 14 mm

Multiple drill head from Romai, Sigloch & Schrieder up to diameter 14 mm in steel 4 stations, automatic and manual switching 2 speed ratios choiceable (direct and reduced) incl. adapter MK 4 and flange

Size: 100 mm Equipments: Centering function Heating roller Mini circular saw Paper unwinding SPS control Optional INATEC BS 25002 PUR ( 1500 EUR extra) input station with plate lifting station

capacity 90 degrees: round: 300 mm capacity 90 degrees: square: 330 mm : 400 x 310 saw band length: 3820 x 34 x 1,1 mm band speed: 22 - 88 m/min table height: 930 mm total power requirement: 2,2 kW weight of the machine ca.: 0,8 t dimensions of the machine ca.: 2,22 x 1,2 x 2,1 m Double miter band saw, hydraulic semi-automatic • miter left 60° + right 45° • Industrial hydraulics, powerful 18 bar • Best access to the material • Ammeter to check a. - Optimization of cutting force - Tape life - cutting course • Vise closes/opens hydraulically • Material turntable with ball bearings b. • Adjustable quick-release • Material height sensor Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise The data for this a ...

Due to new motorization in the rotating state from a dry cargo ship removed

1 Benhil 250 gr Butter Packing Machine with Bottom Folding No. 195-302 A Output approx. 5 to butter /hour

2 tanks filled with e.g. fruit pomace, capacity 2 x 25,000 l Product is introduced into the tanks via a screw, set up on 2 frames for the underpass of the silo truck Height of the tanks: 6.50 m, D: 3.60 m with top-mounted walkway with railing

Fully automatic horizontal cartoning machine type Vario 7.5" (built in 1997) The continuously operating cartoning machine is suitable for erecting, filling and sealing pre-glued folding cartons. The machine has been completely overhauled, i.e. all mechanical components have been completely renewed, the electrical equipment is state-of-the-art (retrofit). It is equipped with a hot glue seal. Capacity: up to 150 folding cartons/min The following folding box dimensions can be processed: A 25-150mm W 15-100 mm H 55-230 mm Machine is set up to customer format(s) and delivered ready for use. The following additional options are possible: Various feeding devices for products such as bags, blisters, bottles, etc. on request Good opportunity for startup companies Machine can also be rented

2 almost identical, mobile loading bridges from 1.45 m to 0 Manufacturer Fa Butt, Factory No, 80110001281 A Year of construction 2010 Load capacity 7,000 kg

x-travel: 1600 mm : ja weight of the machine ca.: 13,7 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used KHS PET stretch blow molder, year of manufacture: 2016, type: Inno PET Blomax 10S, 10 cavities, output approx. 14,000 - 22,000 bottles / hour, PCO 1810, currently set up to 0.5 - 1.5, optionally with air transport. Used KHS Blow Molding PET Blowing Machine, Year: 2016, Type: Inno PET Blomax 10S, 10 cavities, Range of capacity 14.000 - 22.000 bph, Bottle Neck PCO 1810, now adjusted to 0.5 - 1.5 / 500ml - 1.500ml, optional PET bair conveyors available.

Bosch 0 / 811 404 039 / 0 831 006003 Solonoid valve

Lock cylinders, carriage cylinders, WDS cylinders, holding arms for punching tools, screw S 30/24D, and much more