128,680 used machines on RESALE, but how to find them? Machine Search
Pressure: 16 bar Motor: 0,15 kW Free air delivery: 1,4 m³/min Measurement (WxHxD): 337 x 665 x 593 Weight: 35 kg Compressed air connection: 3/4
Pressure: 16 bar Motor: 1,75 kW Free air delivery: 12 m³/min Measurement (WxHxD): 580 x 880 x 790 Weight: 106 kg Compressed air connection: 2
Pressure: 16 bar Motor: 0,9 kW Free air delivery: 6,2 m³/min Measurement (WxHxD): 510 x 860 x 790 Weight: 64 kg Compressed air connection: 1 1/2
Pressure: 16 bar Motor: 0,57 kW Free air delivery: 6,2 m³/min Measurement (WxHxD): 400 x 795 x 673 Weight: 55 kg Compressed air connection: 1 1/2
plate thickness: 3 (VA), 4 (ST 40) mm cutting angle adjustment: 30 - 120 ° cutting length: 200 mm throat: 300 mm table height: 900 mm work stroke: max. 40 mm no. of strokes: max. 40 Hub/min Punching capacity: 125 kN punch diameter: max. 105 mm total power requirement: 4 kW weight of the machine ca.: 20 t dimensions of the machine ca.: L 1,5x B 1,3 x H 1,38 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Pressure: 11 bar Measurement (WxHxD): 1000 x 2250 x 1000
Pressure: 11 bar Measurement (WxHxD): 1150 x 2250 x 1150 Weight: 500 kg
Pressure: 11 bar Measurement (WxHxD): 1150 x 2250 x 1150 Weight: 500 kg
Pressure: 11 bar Measurement (WxHxD): 1150 x 3325 x 1150 Weight: 750 kg
Pressure: 11 bar Measurement (WxHxD): 800 x 2340 x 800 Weight: 280 kg Compressed air connection: 1 1/2
Pressure: 16 bar Measurement (WxHxD): 550 x 1823 x 550 Weight: 160 kg Compressed air connection: 1
spindle diameter: 130 mm x-travel: 2750 mm y-travel: 2500 mm z-travel: 1050 mm w-axis: 1000 mm Radial face slide diameter: 800 mm radial face slide travel: 240 mm table surface area: 1800x2000 mm turning speeds: 4,8-900 U/min workpiece weight: 8000 kg faceplate speeds from - to: 4,5-180 U/min Feed: 5-2000 mm/min threading: total power requirement: 40 kW weight of the machine ca.: 37 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Pressure: 11 bar Measurement (WxHxD): 400 x 1516 x 400 Weight: 70 kg
GeneralCTX beta 1250 4A Two spindle turning centre with - partial hollow clamping device for main spindle and counter spindle internal diameter of draw tube Ø67 mm (2.63 in) x 700 mm (27.55 in) deep - 2 C-axes and spindle brakes (hydr.) - 2 12 fold Sauter star turrets reception VDI 40, DIN 69880-40 with precision interface (Trifix) and tool drive connection/drive acc. DIN 5480 - Y-axis, slide I - counter spindle slide; Control: CELOS X with Siemens 840D SL Operate Headstock, leftClamping chuck Ø315 mmSpindle nose diameter170h5 mmSpindle diametre on front bearing130 mmSpindle bore87 mmDrive power (100% DC)25 kWTorque (100% DC)280 NmSpeed range0-5000 rpmC-Axis Speed2000 rpmHeadstock, rightClamping chuck Ø315 mmSpindle nose diameter170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmDrive power (100% DC)25 kWC-Axis Speed2000 rpmTorque (100% DC)280 NmSlide 1Longitudina ...
Water treatment plant Manufacturer: BWT Type Osmotron 2000-PH-S System was overhauled in 2020, new control cabinet from 2021 Year of construction 2000 BWT Osmotron water treatment plant of BWT Pharma & Biotech GmbH for 2000l/h Aqua Purificata production 1 piece of water treatment plant BWT Osmotron Plant of the company BWT Pharma & Biotech GmbH for 2000l/h Aqua Purificata production, incl. • 90μm pre-filter with automatic backwash • Softening system in series operation (without hardening slip) and for 600 litre salt-plastic tank for regeneration • Heyl Testomat 2000 • 2 chlorine cells to reduce germs in the softeners • Reverse osmosis modules for 2000l/h • 4x SM20 EDI modules (electro-deionization modules) • Conductivity meter for permeate (after reverse osmosis module) Mettler Toledo • Conductivity meter for diluate (according to EDI modules) THORNTON 200C ...
x-travel: 20000 mm y-travel: 2800 mm z-travel: 1050 mm control: Heidenhain 530i taper ISO: 50 P.D.B. spindle speeds: 0 - 2000 mm voltage: 380 V total power requirement: 30 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
rated capacity: 2000 KG ram hammer stroke: 1080 mm throat: 1100 mm impact capacity: 10000 kgm no. of strokes: 125 Hub/min ram hammer weight: 2300 kg work height max.: 620 mm total power requirement: . kW weight of the machine ca.: t dimensions of the machine ca.: m Steam drive The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Torque: 12 Nm volt: 145 V ampere: 15 A total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About usMore than 400 of our own machines in the warehouseMore than 8500 m² of storage space, crane capacity 70 tMore than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 8000 mm table width: 2500 mm burner heads: 1 control: Selectron CNC 96 output: 4 kw total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Recommended as a line with PT 8, closure applicator TCAP ReCap 2 and packer TCBP 62. The 1000 Base format is Tetra Pak's classic one-litre brick format. This TBA 8 offered here is from the V100 development stage. Like all of our Tetra Pak machines, this line is first subjected to a thorough incoming check. After the following cleaning and the extensive examination of the condition, we overhaul the machine with the necessary care. This machine is equipped with a TP MC control system and produces 6000 packs per hour. As with most Tetra Pak machines, we are happy to offer you these with the associated machines for an entire filling line. Regardless of this, we will be happy to advise you in advance and make you an individual offer. Please contact us or schedule a visit to our workshop to see the extensive work for yourself. From our extensive range of machines that we have in stock, we are ...
weight: . kg taper MK: . height: 350 mm flute distance: 255 mm thickness of jaw: 80 mm Jaw extension with claw boxes for carousel latheJaw height 80 mmJaw width 80 mmGroove spacing 255 mmHeight 700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 8000 mm y-travel: 1000 mm z-travel: 1250 mm dividing head: CNC chip conveyor: Universal angular milling head 2-axis adjustable: control: Fagor type: 8025 : CNC clamping plate: 1500x3000 mm clamping plate: 1500x4000 mm clamping plate: 1500x4000 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
TBA 19 machines have been developed for the filling of compact formats. The 250 milliliter base format is one of the most requested volumes. In this format, the system is used for many types of products. Before and during the repair work, we constantly check the condition of all existing parts and, if necessary, replace them before reassembling the machine. After extensive work in our workshop, we test all machine components intensively. Our aim here is the smooth interaction of all machine groups up to the finished product. These tests at the end of the technical work are particularly important for the later use of the machine. We can find existing errors in the system and fix them before the next production use. TBA 19 machines are available in different development stages. We will be happy to explain the extensive steps to make the system operational again for you. On request, we can ...
Designed as a machine for smaller formats, the 19 200 Base is capable of producing 7500 packs per hour. It is suitable for filling different products. Preferably, aseptic products are filled in the machine, which are previously fed into the filling line via a UHT or a pastorizer for preservation. Subsequently, it is possible to equip the filling machine with different downstream equipment. You are welcome to contact us to find the right selection for your requirements. We are also happy to support you in the planning and implementation of the necessary conveyor belt systems to connect the individual machines as a line. All machines undergo extensive technical work before they are put back into operation, which we always carry out in our workshop. In the end, there are always tests to be fully verified. These tests guarantee the perfect condition of the machine for the customer. On reques ...
weight max. in kg: 2000 kg Gripping range: 1050-1200 mm Suspension: . 0 weight: 180 kg weight max.: 2 t clamping width: . mm total power requirement: . kW weight of the machine ca.: . t dimensions of the machine ca.: . m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: max.: 4000 mm turning diameter over slide rest: . mm turning length: 7500 mm speed: 0-750 u/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
control: Siemens Sinumerik 840D table load: 0,7 t work piece spindle speed: 200 - 2300 U/min total power requirement: 12 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Designed as a machine for smaller formats, the 19 200 Base is capable of producing 7500 packs per hour. It is suitable for filling different products. Preferably, aseptic products are filled in the machine, which are previously fed into the filling line via a UHT or a pastorizer for preservation. Subsequently, it is possible to equip the filling machine with different downstream equipment. You are welcome to contact us to find the right selection for your requirements. We are also happy to support you in the planning and implementation of the necessary conveyor belt systems to connect the individual machines as a line. All machines undergo extensive technical work before they are put back into operation, which we always carry out in our workshop. In the end, there are always tests to be fully verified. These tests guarantee the perfect condition of the machine for the customer. On reques ...
turning diameter: 820 mm turning length: 5000 mm turning diameter over slide: 460 mm control: B2T max. torque on the spindle: 3400 Nm turning speeds: 5,6-1120 U/min Feed: 1-5000 mm/min Rapid movement: 5000 mm/min tailstock quill taper MT: 6 3 jaw chuck Forckrath: 630 mm steady: 525 mm steady: 335 mm main drive motor: 50 kW total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 6000 mm y-travel: 1670 mm z-travel: 1050 mm spindle taper ISO: 50 Control: Heidenhain Table dimensions: 8000x1030 mm table height: 765 mm spindle drive: 22 kW spindle turning speed range: 16-1600 U/min Feed: 5-2500 mm/min rapid traverse: 7500 m/min total power requirement: kW weight of the machine ca.: 20 t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore for us not binding. We reserve the right to prior sale, it apply only our business and conditions of sale. About Us more than 400 own machines in stock over 12000 m² storage area, crane capacity 70 t more than 10000 articles accessories for your workshop You want to sell machines, production lines or your company, Then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 30000 mm y-travel: 3600 mm z-travel: 1900 mm Control: Heidenhain type: TNC 530 i milling head -swivable: CNC turning speeds: 4000 U/min conus taper: DIN 69871+AD mm spindle drive: 46 kW Feed: 10000 mm/min Rapid movement: 25000 mm/min chip conveyor: 2 St. coolant: filter unit: Plate area: 31000x2500 mm total power requirement: 85 kW weight of the machine ca.: t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About usMore than 400 of our own machines in the warehouseMore than 12,000 m² of storage space, crane capacity 70 tMore than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company,then contact us. The data for this ad was created with ModulMWS - the software solution of Lo ...
Fan filter, fan array, air cooler, control cabinet fan, filter fan, server blower, server fan -Manufacturer: NMB, Control cabinet fan server fan with housing -Type: BG0903-B044-000 -Voltage: 12 V -Number: 8 fans available -Price: per piece -Dimensions: 500/280/H90 mm -Weight: 1.9 kg/pc.
table length: 6000 mm table width: 2500 mm burner heads: 1 z-axis: 210 mm Table load: 2600 kg total power requirement: 3 kW weight of the machine ca.: t dimensions of the machine ca.: m capacitive tactile sensing changing table Nachtaktmöglichkeit filter system The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The technical data are manufacturer or operator information and are therefore non-binding for us. We reserve the right to sell the goods prior to the event, our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 12,000 m² of storage space, crane capacity 70 t More than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The technical data are manufacturer or operator information and are therefore non-binding for us. We reserve the right to sell the goods prior to the event, our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 12,000 m² of storage space, crane capacity 70 t More than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The technical data are manufacturer or operator information and are therefore non-binding for us. We reserve the right to sell the goods prior to the event, our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 12,000 m² of storage space, crane capacity 70 t More than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The technical data are manufacturer or operator information and are therefore non-binding for us. We reserve the right to sell the goods prior to the event, our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 12,000 m² of storage space, crane capacity 70 t More than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
diameter: 60-100 mm tool adaptor: . length: 600-1200 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Die techn. Daten sind Hersteller- bzw. Betreiberangaben und daher für uns unverbindlich. Einen Zwischenverkauf behalten wir uns vor, es gelten ausschließlich unsere Geschäfts- und Verkaufsbedingungen. Über uns mehr als 400 eigene Maschinen im Lager über 12000 m² Lagerfläche, Krankapazität 70 t mehr als 1000 Artikel Zubehör für Ihre Werkstatt Sie wollen Maschinen Produktionslinien oder Ihren Betrieb verkaufen, dann sprechen Sie uns an. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
We sell 2x Knorr-Bremse compressors here. The following data: Suitable for RVI MIDLUM PREMIUM Manufacturer Part Number: KNORR LK4944 | K017527X00 Compressor-Air, Capacity 720cm³, Number of Cylinders: 2, Cooling: Liquid, Price is unit price. Shipping: DHL, DHL Express, Freight Forwarder. Request international shipping. Customs fees may apply. English requests are gladly accepted at the international level. In addition, we offer spare parts for various engine manufacturers in the gas engine sector / biogas. The spare parts can be sent to you by express as quickly as possible. This minimizes downtime. Our dedicated sales team with decades of professional experience is at your side with advice and support. This also includes maintenance E40, E50, E60 and even an E70 for MWM engines. These maintenance can be carried out on site, except for one E70. Our mobile response te ...
We sell here a turbocharger for a MAN V12 diesel engine. 7677 left. 1800 rpm Refurbished. Shipping: DHL, DHL Express, Freight Forwarder. Request international shipping. Customs fees may apply. English requests are gladly accepted at the international level. In addition, we offer spare parts for various engine manufacturers in the gas engine sector / biogas. The spare parts can be sent to you by express as quickly as possible. This minimizes downtime. Our dedicated sales team with decades of professional experience is at your side with advice and support. This also includes maintenance E40, E50, E60 and even an E70 for MWM engines. These maintenance can be carried out on site, except for one E70. Our mobile response team is active nationally and internationally. They bring the necessary tools and know-how with them. Draw on over 25 years of professional experience. With ...
Transport length: 2800 mm band width: 180 mm dayligth: 250 mm width: 300 mm 0: 1300 mm total power requirement: kW weight of the machine ca.: 0,75 t dimensions of the machine ca.: 4,6x0,5x1,7 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
weight max. in kg: 2000 kg Gripping range: 700 mm Suspension: . 0 weight: 60 kg weight max.: 2 t clamping width: . mm total power requirement: . kW weight of the machine ca.: . t dimensions of the machine ca.: . m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 1000 kg workpiece length - max.: 6500 mm weight of the machine ca.: 600 t dimensions of the machine ca.: 120x30 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
We sell here a turbocharger for a MAN V12 diesel engine. 7676 on the right. 1800rpm Refurbished. Shipping: DHL, DHL Express, Freight Forwarder. Request international shipping. Customs fees may apply. English requests are gladly accepted at the international level. In addition, we offer spare parts for various engine manufacturers in the gas engine sector / biogas. The spare parts can be sent to you by express as quickly as possible. This minimizes downtime. Our dedicated sales team with decades of professional experience is at your side with advice and support. This also includes maintenance E40, E50, E60 and even an E70 for MWM engines. These maintenance can be carried out on site, except for one E70. Our mobile response team is active nationally and internationally. They bring the necessary tools and know-how with them. Draw on over 25 years of professional experience. ...
Transport length: 3400 mm band width: 600 mm dayligth: 600 mm width: 800 mm total power requirement: kW weight of the machine ca.: 0,75 t dimensions of the machine ca.: 4x0,8x0,6 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 20 t stroke: 8-38 mm no. of strokes: 100-1800 Hub/min table surface area: 400x400 mm table pass: 380x80 mm table height: 1000 mm weight of the machine ca.: 4 t dimensions of the machine ca.: BxTxH 1600x1600x3100mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 100 t stroke: 10-130 mm no. of strokes: 30-90 Hub/min throat: 330 mm ram - range of adjustment: 100 mm table surface area: 950x660 mm ram surface: 540x440 mm hole in the table: Ø 230 mm table height: 1000 mm tool hole in ram: Ø 50 mm total power requirement: 7,5 kW weight of the machine ca.: 7 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
maximum number of results exceeded
please refine your search
