b b used for sale

Collet chuck, tool holder, tool holder, milling chuck, milling tool -Collet holder: MK3 -Bore: Ø 30 mm -Total dimensions: Ø 60 x 168 mm -Weight: 1.0 kg

MAN Gas Generator in Box Manufacturer : MAN Rated Output Power : 350 KVA Speed :1500 RPM Voltage : 400 V Frequency : 50 Hz Condition : Used Fuel : Gas Cylinder : 12 Cylinder Please see attached the pictures for the units available for sale. Kindly advise your interest if you would like to get further details feel free to contact us back. For arranging the visit inspection; and pricing information feel free to contact us at: Enquiries@ukpowergeneratorsltd 00447956518924

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chuck, soft -Jaw width: 20 mm -Dimensions: see photo technical drawing -Total dimensions: 67/60/H41 mm -Total weight: 1.0 kg

revolutions per minute: 8000 U/min x-travel: 1000 mm y-travel: 500 mm z-travel: 570 mm Control: Siemens weight of the machine ca.: 5000 KG The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chuck, soft -Jaw width: 20 mm -Dimensions: see photo technical drawing -Total dimensions: 65/60/H46 mm -Total weight: 1.1 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chuck, soft -Jaw width: 20 mm -Dimensions: see photo technical drawing -Total dimensions: 65/60/H46 mm -Total weight: 1.1 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chuck, soft -Jaw width: 20 mm -Dimensions: see photo technical drawing -Total dimensions: 62/60/H42 mm -Total weight: 1.1 kg

ID3337 Wassara Drilling equipment / Bohrausrüstung Drilling equipment (Wassara W150 water hammer), new price of the entire equipment approx. 50,000 euros Drilling equipment, (Wassara W150 water hammer), original price of all equipment approx. 50,000 euros

Bühler Riser (Tarar) MVSO 100 converted to MVSQ 100

In good condition CO2 installation & cold room build in 2021. Cold room temperature +-4°C and a evaporating temperature of -8°C. The installation includes the following: One cold room storage with a panel thickness of 100 mm and a isolation value of RC 5,21. Further the cold room has an electrical slide door and 3 Bachara MGS 450/CO2 gas detectors. One for on the machineset and two for in the cold room. Cold room temperature is +-4°C. Dimensions internal: 24.800x7.800x2.900 mm (LxWxH) Dimensions external: 25.000x8.000x3.100 mm (LxWxH) Dimensions slide door: 2500x2500 mm (WxH) Cold room surface: 194 m² Cold room volume: 600 m³ Advansor MiniBooster 2x1 unit complete with a low-temperature Bitzer 2HSL-3K-40S & medium-temperature Bitzer 4KTE-10K-40S (x2) semi-hermetic reciprocating compressors, Klimal RCO 273.108.53.80+WT 17.19 liquid collector, 2 Danfoss VLT drives and a D ...

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chuck, soft -Jaw width: 20 mm -Dimensions: see photo technical drawing -Total dimensions: 65/60/H48 mm -Total weight: 1.0 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for three-jaw lathe chucks, hard -Jaw width: 20 mm -Dimensions: see photo technical. drawing -Total dimensions: 85/66/H62 mm -Total weight: 1.7 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws -Interchangeable jaws: 3-piece soft top jaw set -Width: 20 mm -Dimensions total: 84/63/H38 mm -Total weight: 1.1 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws -Interchangeable jaws: 3-piece soft top jaw set -Width: 20 mm -Dimensions total: 80/63/H38 mm -Total weight: 1.1 kg

Suspension clamp, helmet rail holder, helmet rail, running rail, rail holder -Manufacturer: Helm, suspension clamp rail holder galvanized yellow -Type: 1508 Width 70 mm -Dimensions: see photos -Number: 2x suspension clamp available -Price: per piece -Dimensions: 295/90/H150 mm -Weight: 1.9 kg/piece

Suspension clamp, helmet rail holder, helmet rail, running rail, rail holder, clamping sleeve, sliding gate sleeve, clamping sleeve, sleeve -Manufacturer: Helmet, rail holder -Type: HL width 80 mm -Dimensions: see photos -Quantity: 1x holder available -Dimensions: 180/140/H115 mm -Weight: 2.9 kg

Twin door model to take two dolavs at a time. Also suitable for tote bins and lids. Has never been installed. Gas heated

x-travel: 1500 mm y-travel: 1500 / 1000 mm z-travel: 975 mm Control: Fidia total power requirement: 20 kW weight of the machine ca.: 12,5 t dimensions of the machine ca.: 5 x 6 x 4 m No. 3087 5-axis milling machine BOHNER & KÖHLE VH 2 / 10 K Working area: 1500 x 1500 (1000) x 975 Drive: 14 kW Control: Control Fidia V 7.2 Table 2500 x 1000 mm 16-fold tool changer Kelch Spindle holder SK 50 Spindle speeds 40-5600 min-1 Projection of milling spindle 1030 mm Weight 12500 kg Gewicht 12500 kg 13,5 Lademeter Größte Transportbreite 3 m Größte Transporthöhe 3,60 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 3 mm pressure: ? t total power requirement: 3,5 kW weight of the machine ca.: 1 t dimensions of the machine ca.: 1,3 x 0,9 x 1,1 m No. 3549 Notching machine BOSCHERT K 30 / 120 MINI No. 1 Working area: Table 800 x 450 Drive: 3,5 Foot switch Table 800 x 450 mm with T-slots 45° / 90° / 180° swivel 120° (2 x60°) Space requirement approx. 1300 x 900 x 1100 mm Weight approx. 850 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

drilling machine, drilling machine, plate drilling machine, row drilling machine -Drilling machine: for Styrofoam or other materials, mobile -Drills: 2x Metabo SBEV 1100-2 S -Speed: 0-3100 rpm -Aluminium frame -Dimensions: see photos -Dimensions: 1200/870/H1210 mm -Weight: 108 kg

New filtercyclone made by Bühler. New sheepskin. Fan included.

max. width of grinding wheel: 145 mm diameter / bore of grinding wheel: 300 mm Flange taper: Reishauer 0 grinding wheel size: 300x145x160 mm Beam flange (machine type Reishauer RZ 400/800/1000) + including grinding disc T1SP 300x145x160 M 3,75 EW20° 3GG Cubitron blue from the company 3M Ceramic grinding discs for tooth flank grinding - 145 mm wide Dimensions according to machine type Reishauer Profiling according to specification module m, running speed gg, pressure angle EW Advantages: - Grinding burn risk is close to zero - Up to 50% shorter sanding times - 2-fold reduction in dressing effort - Twice the service life of grinding discs - Continuous, consistent sanding performance - Significantly higher sanding parameters than with standard tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

roller conveyor, conveyor track, roller conveyor support, conveyor track support, support -Support: Adjustable support for roller conveyors or similar -Height: 570 to 800 mm -Width: 480 mm -Number: 19x support available -Price: per piece -Dimensions: 475/130/H570 mm -Weight: 7.7 kg/piece

Working widths: 1800 mm roll surface width: 2000 mm pressure: t Number of rollers: 2 Stück Upper roll: Gravur oder Stahl dia diameter of upper rolls: 210 mm Heating - upper roll: Elektro Lower roll: Gummiert dia diameter of lower rolls: 300 mm Roller covering - soft rubber: 95 Grad shore Clouth speed: m/min required power: kW weight: 2 t dimensions of the machine ca.: 3,0 x 1,5 x 1,8 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

control: Dialog 3 + 4 type of control: CNC Fräsen The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Air filter stainless steel new and unused. Length ~3000mm Inner d ~80mm Outer d~110mm Request your quote for quantities from 1 to 100

Lifting mast, stacker mast, forklift mast, lifting frame, rear forklift -Manufacturer: Baumann, forklift mast from sideloader type AS 60/18/15 -Load capacity: approx. 6000 kg -Lifting height: mm -Recording/Dimensions: see photos / technical drawing -Transport dimensions: 3200/1620/H750 mm -Weight: 2100 kg

Thread cutting machine, pipe thread cutter, thread cutting head, thread cutting chuck, thread chuck, thread cutting apparatus -Manufacturer: Rems, thread cutting head -Pipe size: 2 1/2 to 4 inches -Spindle bore: dimensions see pictures -Dimensions: 410/400/H340 mm -Weight: 50 kg

This injection moulding machine from Dr. Boy is in good condition. The machine is from 2007 and has few working hours. Brand: Dr.Boy GmbH & Co.KG Model: 55M Year of construction: 2007 Clamping force: 55 T Screw diameter: 32mm Shot volume: 96.5 cm³ Working hours: 24,210

Beer bottling line, Framax 9-8-1 filler, pressure filler, double pre-evacuation, module block RFCI 09-08-1 DPS-C, year of construction: 2014, set up for 330ml bottles, with labeling machine, self-adhesive labels Beer Bottling line, Made by: Framax 9-8-1 Filler, Counter pressure filler, isobaric, double pre-evacuation, Modulblock RFCI 09-08-1 DPS-C, Year: 2014, adjusted to 330ml, 33cl, 0,33l glass bottles, Labeller Labelling machine, self adhesive labels

Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet -Tool cabinet. Drawer cabinet, sturdy design -6 drawers: layout/height see photos -lockable: without key -Dimensions: 630/750/H930 mm -Weight: 88 kg

We offer: a construction dryer Make: Wilms Model: Heating Cannon Heater Hot Air Blower Construction Dryer Nominal voltage/ current type: 220 V Fuel: Fuel oil Subject to changes and errors. Sale under exclusion of any warranty and liability for material defects.

Bakon Apricot/Fondant Coating Belt Line Year of construction 2000 Continuous flow device, with round belt spreader belts with instantaneous water heater system and jelly instantaneous water heater Working width 550mm Apricot station with airless nozzles Fondant station with splash device and nozzles for zigzag pattern with drying tunnel with melting tank for approx. 100l fondant with spared material pump - Bakery condition not cleaned - partially. in need of overhaul

Transformer, transformer, converter, three-phase autotransformer, three-phase transformer, three-phase transformer, single-phase transformer, transformer -Manufacturer: Elsund, Transformer Type BBXB -Power: 2.233 kVA -Technical data: see photo type plate -Dimensions: 210/210/H255 mm Weight: 30 kg

PLC controller, connection module for digital electronic modules, terminal module -Manufacturer: Fanuc, Terminal I/O Basic Dual Module -Type: A03B-0823-C001 A03B-0823-C003 -Price/Sale: complete -Dimensions each: 140/130/H150 mm -Weight: 0.9 kg

Thread cutting machine, pipe thread cutter -Manufacturer: Ridgid, thread cutting machine type 535 -Pipe size: 1/8 to 2 inches -Spindle bore: Ø 64 mm -Operating voltage: 230 volts -Dimensions: 1080/700/H1140 mm -Weight: 128 kg

Year of Make: 1997 KRONES BLOC for rinsing, filling and capping glass and PET bottles. Rinser: 20 grippers Filler: 20 valves (pitch 222 mm) Capacity: 6000 bph Capper: 5 heads. (PE threaded closure) . Possible bottle formats from 0.33 to 5 L. The system is now mechanically completely overhauled, the new control system is missing. OPTION: If desired, we can equip the machine with a new control system before delivery and adapt it to customer requirements.

Cloth lapper, polishing disc, grinding disc, coarse cleaning disc -Manufacturer: 3M Scotch-Brite, coarse cleaning disc type CG-DC Ovp 6 pieces -Art.No.: 61122 -Diameter: Ø 150 x 13 mm -Shipping/Price: complete -Transport dimensions: Ø 150 x 90 mm -Weight: 0.3 kg

Cloth lapper, polishing disc, grinding disc, coarse cleaning disc -Manufacturer: 3M Scotch-Brite, coarse cleaning disc type CG-DC Ovp 2 pieces -Art.No.: 61163 -Diameter: Ø 200 x 13 mm -Shipping/Price: complete -Transport dimensions: 205/3205/H35 mm -Weight: 0.3 kg

Paper vibrator with spreading rollers Baumann BSB 3/L, year of construction 1988, serial number 210277, in good condition, immediately available If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machine in our house by prior appointment.

BOEHRINGER NG 180-2 CNC turning center was built in 2006 in Germany. This reliable and efficient machine performs precision machining of workpieces with a maximum diameter of 290 mm using a high-speed spindle and high-quality cutting tools taken from a 12-position turret. The entire turning process is performed with excellent stability, thanks to a vibration- and oscillation-resistant design made of high-quality raw materials. The BOEHRINGER NG 180 CNC lathe is controlled by an intuitive SIEMENS CNC control, whose excellent optimisation allows to maximise production efficiency. The total weight of the machine is 10000 kg. Technical specifications of the BOEHRINGER NG 180-2 lathe - CNC control: SIEMENS SINUMERIK - turning diameter: 290 mm - turning length: 850 mm - 12-position turret head - maximum spindle rotational speed: 4000 rpm - minimum spindle rotational speed: 10 rpm - d ...

Year of Make: 2006 The intended use of the LOGOMATIC 906 II B90 is the printing and application of labels to products. In-flow labeling requires a distance between the products Printing Process: Direct Thermal and Thermal Transfer Connected load: 6.0 - 7.0 bar Operating pressure: 5.5 - 6.0 bar Connection: push-in fitting (e.g. FESTO, KD 1/2 and KS P6) Consumption: approx. 100 l/min for LOGOMATIC B 90 approx. 300 l/min

Heat exchanger, cooling coil, cooling pipe, cooling spiral, shell and tube heat exchanger -Manufacturer: Bloksma, heat exchanger shell and tube heat exchanger -Type: B13-2Z-04 B13-3H7-15D -Operating pressure: 6.5 / 3.5 bar -Dimensions: 2235/340/H155 mm -Weight: 61 kg

Saw roller stand, saw roller stand, sawhorse, roller conveyor stand, roller stand -Roller stand: Roller stand for hacksaw, band saw, cold circular saw -Roll height: 445 to 565 mm -Roll: Ø 55 x 270 mm -Dimensions: 370/315/H445 mm -Weight: 22 kg

Lathe spinning tool, roller block, support roller -Support roller: solid design -Roll: Ø 145 mm -Square: 73 x 26 mm, clamping length 180 mm -Number: 2x roller block available -Dimensions: 350/145/85 mm -Weight: 8.4 kg/piece

Bertolaso Model A900N Stainless Steel Caps Elevator Feeding System Hopper Blower Power: 380 KW

x-travel: 1200 mm y-travel: 600 mm z-travel: 700 mm control: HEIDENHAIN TNC 426 M turning speeds: 20-6300 U/min table load: 800 kg : 1200x630 mm tool taper: SK40 : 4 height of the machine: 2950 mm weight of the machine ca.: 8800 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 800 mm, 2000 mm, 800 mm

Model V 800 Machine no. 1049.2955-07 Year of manufacture 1980 Circumferential diameter over bed 800 mm Turning length 2,000 mm Center width 2,000 mm Spindle bore diameter 128 mm Number of bed sleds 1 Quill Cone Morse 6 Voltage 380 V Three-phase current 50 Hz incl. documentation

Parking heater for sale Bosch Part Number: 0 141 002 021

with compressed air accumulator 120 ltr, few operating hours