130,789 used machines on RESALE, but how to find them? Machine Search
Details Machine no. 2042.6616-05 Year of manufacture 2004 Circumferential diameter over bed 1,000 mm Circumferential diameter over bed 1,000 mm Center height over flat web 500 mm Bed width 560 mm Bed slide guide length 800 mm Spindle diameter front bearing 170 mm Spindle bore 128 mm Three-phase motor infinitely variable (AC motor) Drive power 37 kW Torque max. 4,069 Nm Total speed range 6.4 - 1,600 Gear stages 2 Heidenhain control system Manualplus 4110, completely renewed about 1 to 2 years ago 2 Lynettes Equipped with rotary power chuck, diameter approx. 500 mm. Including a lot of accessories of clamping jaws, estimated 15 sets, as well as approx. 15 sets of Multifix base holders, size D. Machine was equipped with a separate milling device, with its own control system, value approx. € 20,000.00. Only served by the owner, ver ...
120 mm cold feed pen convert-extruder, GE 120 SC, make Berstorff, output capacity up to 1,000 kg /h as a power extruder with strip spray head, complete rebuild mechanically and electrically in 2024
Off-road forklift 4x4 with articulated frame, weight 5000 kg load capacity 3.5 t lift 3.3 m Good condition
used spiral mixer Boku SK 120 AK extendable, overhauled, for 120 kg dough per kettle, 2 timers, with 1 stainless steel kettle, if required with up to 2 other kettles for 3.500€ each, stainless steel spiral, 7.9 kW, 18.5 A, 400 V, 50 Hz, mesh no. 10287
Thread rolling machine, thread rolling machine, segment thread rolling machine, cold forming machine, thread rolling head, rolling head -Manufacturer:BWF, thread rolling head -Type: RK 12-20 -Thread rollers: M24 x 1.5 -Dimensions: Ø 120 x 180 mm -Weight: 5.6 kg
Stamping pressure : 40 kN Stamping area : 150 x 210 mm Stamping die holding plate : with dove-tail guiding Stroke of plunger : 28 mm Daylight (adjustment of height) : 0-180 mm Throat (middle of stamping plate to bow) : 190 mm Foil feeding system : motor-driven, 1-fold running from the left to the right side with foil re-winding device Working table : sliding automatically in and out with table lock pneumatic, 400 mm x 450 mm PLC : Siemens S 7-1500 with TP 700 color Safety device : in CE-execution with safety light curtains in front Color of the machine : light grey RAL 7035 Voltage: 3 x 400 VAC (L1/L2/L3/N/PE), 50 Hz. Pneumatic access : oil and water free compressed air, 6bar
standard cooler, car cooler, oil cooler, heat exchanger -Manufacturer: AKG, light metal oil/air cooler from screw compressor Boge VLED 30R-11A -Type: 0720.067.000 -Pressure: max. 15 bar -Dimensions: 650/360/H550 mm -Weight: 40 kg
Used stirring machine BOKU, type: RS 40 E -in bakery condition- - 40 litre kettle - 2 machines available - Technically tested and cleaned - Inspection and test run possible - Boiler capacity: 40 litres -El. Connection: 230 V, 50 Hz, 5.9 A, 1.5 kW
Bruderer BSTA 200 High-performance automatic punching press. max. pressure: 200 kN 20 T Speed range: 100 – 600 spm Year of construction: 1990. Feed BBV on the left side. Adjustable stroke: 8; 13; 19; 25; 32; 38; 44; 51 mm Ram height adjustment: 51 mm Dimensions of the clamping plate (clamping plate): 510 x 400 mm Bed opening: 400 x 160 mm Max. distance of the tool width between the columns: 410 mm. Connected load: 36 kVA Power 400 V 50 Hz Control voltage: 24 V Machine dimensions: H 2540 x W 1661 x D 855 mm Machine weight: approx. 3100 kg Switch cabinet and control system. Including all original technical documentation in German.
Forklift battery charger, industrial charger, Forklift battery charger, industrial charger, Si rectifier -Manufacturer: Hagen Battery, Charger Belatron Type E220 G24/50 B-FB -Input voltage: 220 V 50 Hz -Power: 25.2 V/50 A -Dimensions: 540/330/H420 mm -Weight: 40 kg
Cooling water pump, centrifugal pump, water pump, coolant pump, drilling water pump, submersible pump, switching pump -Cooling water pump: with cooling water tank -Pump: Motor Schlüter 1.5 kW -Container capacity: liters -Dimensions total: 850/620/H670 mm -Weight: 124 kg
Saw roller stand, saw roller stand, sawhorse, roller conveyor stand, roller stand -Manufacturer: Bernardo, roller stand for hacksaw, band saw, cold circular saw -Roll height: 570 to 970 mm -Roll: Ø 52 x 355 mm -Dimensions: 500/420/H570 mm -Weight: 14 kg
325,000 Litre Stainless Steel Storage Tanks with Insulation Excellent condition SBS will carry out complete turnkey project from dismantle to chartering of ship. Please note these tanks must be transported by ship and therefor your site must be near to the port.
Compressor control, compressor control, control panel, control box, control unit -Manufacturer: Boge, compressor control from screw compressor type VLED 30R-11A -Individual components: see photos -Dimensions: 200/110/H150 mm -Weight: 1.2 kg
Manometer, test manometer, Bourdon tube pressure gauge, Bourdon tube manometer -Manufacturer: Wika, Bourdon tube pressure gauge, unused OVP -Type: 232.50.063 4 bar G1/4B rue zentr. -Screw connection: see photos -Number: 1x pressure gauge available -Dimensions box: 120/115/H115 mm -Weight: 0.2 kg
core drilling diameter max.: 200 mm bore depth: 3500 mm swing diameter: 700 mm turning speeds: 475 U/min steady: 275 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
core drilling diameter max.: 200 mm bore depth: 2500 mm swing diameter: 700 mm turning speeds: 475 U/min steady: 370 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Inv. Num. : 7597 Type: Bylaser 2200 M Producer: Bystronic Created: 2006 Parameters: Laser power: 2.2 kW Work table length: 3000 mm Work table width: 1500 mm Machine weight: 1100 kg
Pull cylinders, hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, multi-purpose cylinders -Manufacturer: Enerpac, Hydraulic Cylinder Double Acting Pressure Force 9 Ton -Type: BRD96 -Stroke: 150 mm -Piston rod: Ø 25.4 mm / M22 x 1.5 -Dimensions: 350/63.5/H100 mm -Weight: 6.8 kg
used
Grain conveyor belts capacity 150 t/h, belt width 650 mm, MZN 650, galvanized, also for hall filling 2 pieces 60 meters, stationary 1 drum motor each 2 pieces 60 meters revisable LEFT 7 RIGHT, 2 drum motors each, 2 displacement drives, IPE 200 mm rails, trailing cable 1 piece 30 meters, with drum motor 2 pieces 20 meters, with drum motor 1 piece 26.6 meters with regulating gear motor 15 KW, was receiving conveyor with many rollers 2 pcs 5 meter drum motor 2 pieces 7.5 meter drum motor Pictures are welcome to be sent. Dismantled, immediately available. Tel. 01715213204
We have on stock this new Bitzer compressor: 2MSL-07K - 650Eur 2KSL-1K - 650Eur 2HSL-3K - 250Eur (used) And freon compressors: 4DES-5Y - 1100Eur 4FC-3.2Y - 950Eur All price for negotiation!
ECOLAB filler outdoor cleaning system, but can also be used as a satellite station. As good as new, ready for immediate use
gear motor, electric motor, electric gear motor -Manufacturer: ABM Baumüller, gear motor type IIb / DLB 421 -Speed: 50 rpm -Power: 0.8 kW -Design: B3 -Shaft: Ø 35 x 80 mm -Dimensions: 475/240/H235 mm -Weight: 38 kg
Bruker MPA FT-NIR Spectrophotometer Bruker NIR for the measurement of liquids in cuvettes or vials Furthermore, for the measurement of solids and semi-solid materials with the help of an integration sphere (diffuse reflection) Integration Ball PbS Detector 12800-3000 1/cm (780-2780nm) Te-InGaAs Detector 12800-4000 1/cm (780-2500 1/cm)
- FAGOR 8055 control system - Max. turning Ø: 550 mm - Max turning length: 2000 mm - Tool turret with 8 stations - Travel distance: X= 300, Z= 2150 mm - Quill travel: 150 mm - Dimensions LxWxH: 4200 x 2100 x 2050 mm - Weight: 4,900 kg Accessories: various tools
hydraulic pump, oil pump, hydraulic unit, hydraulic pump, hydraulic pump, traction motor, drive motor -Manufacturer: Bosch, hydraulic pump -Type: 0 510 425 307 -Shaft: conical Ø 14-17 mm -Flange: Ø 80 mm -Quantity: 1x pump available -Dimensions: 130/90/H120 mm -Weight: 3.4 kg
Key data: 8020 mm, 1 mm
with electric cutting device with 10 stand units with motor scissors New CNC control single program MAS with touch screen with rotary wheel Projection: approx. 100 mm Colour: green Total power requirement: 400 V Motor power: 5.5kW Upper beam stroke: 190 mm with electric roller shears Power: 8020 x 1.5 mm steel, 2.0 mm aluminum Dimensions: 9200 x 1400 mm Weight: approx. 3650 kg Machine has been repaired, checked, cleaned by a professional and is fully functional. Test run was carried out.
hydraulic pump, oil pump, hydraulic unit, hydraulic pump, hydraulic pump, traction motor, drive motor -Manufacturer: Bosch, hydraulic pump -Type: 0 510 325 014 -Shaft: conical Ø 14-17 mm -Flange: Ø 80 mm -Number: 2x pumps available -Price: per piece -Dimensions: 125/90/H120 mm -Weight: 3.3 kg/piece
hydraulic pump, oil pump, hydraulic unit, hydraulic pump, hydraulic pump, tandem pump -Manufacturer: Salami, Double hydraulic pump -Type: 2PB6.2/1PB2S-B03B2 -Flange/shaft: see photo, square 8 x 18 mm -Number: 6x pumps available -Price: per piece -Dimensions: 175/80/H100 mm -Weight: 2.7 kg/piece
hydraulic pump, oil pump, hydraulic unit, hydraulic pump, hydraulic pump, tandem pump -Manufacturer: Salami, Double hydraulic pump -Type: 2PB4,5/1PB2S-B03B2 -Flange/shaft: see photo, square 8 x 18 mm -Number: 5x pumps available -Price: per piece -Dimensions: 175/80/H100 mm -Weight: 2.7 kg/piece
hydraulic pump, oil pump, hydraulic unit, hydraulic pump, hydraulic pump, tandem pump -Manufacturer: Salami, Double hydraulic pump -Type: 2PB4,5S-B03B2 -Flange/shaft: see photo, square 8 x 18 mm -Number: 2x pumps available -Price: per piece -Dimensions: 175/80/H100 mm -Weight: 2.7 kg/piece
Hydraulic pump, oil pump, hydraulic power unit, hydraulic pump, drive motor, drive motor, gear pump -Manufacturer: Bucher, hydraulic pump, gear pump -Type: AP200/8.5 S 259 -Flange/shaft: see photo, square 8 x 17 mm -Number: 7 pumps available -Price: per piece -Dimensions: 84/82/H100 mm -Weight: 2.0 kg
60 m pallet rack Bito P5 Used goods very good condition, see pictures. Height 4.5 m Depth 110 cm, galvanised Bay load 16000kg Strap length 3.6 m blue Carrier with Load / Compartment 4000 kg Negotiation price: € 3.950,-- net from stock Offer consists of: + 17 frames pre-assembled, depth 110 cm, height 4.5 m + 64 beams, length 3.6 m, 4000 kg load/compartment +128 pcs Suspension Devices + 68 pcs concrete anchors Used corner protectors immediately available, surcharge per piece 15,- € net! Other accessories such as clamping plates, insert grids, etc. on request. Payload signs, documents, etc. are a matter of course. Further accessories can be found in the accessories catalogue. Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. More information on request. More than 5000 linear metres of pal ...
Silo 20 m³ volume with hook holder Payload 28 to, dead weight 2500 kg Diameter 2500 mm, height 6600 mm, outlet height 1100 mm Outlet NW 250 Blow-in line, vent line, inspection cover NW 500 Silo butterfly valve Footprints 2400 x 2500 mm Next Pressure Test 07/28
The technical data are manufacturer or operator information and are therefore non-binding for us. We reserve the right to sell the goods prior to the event, our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 12,000 m² of storage space, crane capacity 70 t More than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The technical data are manufacturer or operator information and are therefore non-binding for us. We reserve the right to sell the goods prior to the event, our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 12,000 m² of storage space, crane capacity 70 t More than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
electric motor, three-phase motor -Manufacturer: Bauknecht, electric motor type RF 4/4-1 n -Power: 4 kW -Speed: 1430 rpm -Shaft: Ø 28 x 60 mm -Design: B3 -Protection class: P 33 -Dimensions: 430/388/H388 mm -Weight: 62 kg
Surface Grinding Machine BLANCHARD type 20D Shelf diameter: Ø 915 mm Shelf speed: from 5 to 27 RPM Grindstone diameter: Ø 500 mm Maxi height under wheel: 450 mm Spindle motor: 30 CV - 715 RPM Electromagnetic chuck Rapid Up/Down Voltage 220 V Tri Dimensions (L x W x H): 3700 x 2000 x 2600 mm Weight: 6 T
The technical data are manufacturer or operator information and are therefore non-binding for us. We reserve the right to sell the goods prior to the event, our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 12,000 m² of storage space, crane capacity 70 t More than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The technical data are manufacturer or operator information and are therefore non-binding for us. We reserve the right to sell the goods prior to the event, our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 12,000 m² of storage space, crane capacity 70 t More than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The technical data are manufacturer or operator information and are therefore non-binding for us. We reserve the right to sell the goods prior to the event, our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 12,000 m² of storage space, crane capacity 70 t More than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The technical data are manufacturer or operator information and are therefore non-binding for us. We reserve the right to sell the goods prior to the event, our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 12,000 m² of storage space, crane capacity 70 t More than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The technical data are manufacturer or operator information and are therefore non-binding for us. We reserve the right to sell the goods prior to the event, our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 12,000 m² of storage space, crane capacity 70 t More than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The technical data are manufacturer or operator information and are therefore non-binding for us. We reserve the right to sell the goods prior to the event, our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 12,000 m² of storage space, crane capacity 70 t More than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The technical data are manufacturer or operator information and are therefore non-binding for us. We reserve the right to sell the goods prior to the event, our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 12,000 m² of storage space, crane capacity 70 t More than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The technical data are manufacturer or operator information and are therefore non-binding for us. We reserve the right to sell the goods prior to the event, our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 12,000 m² of storage space, crane capacity 70 t More than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The technical data are manufacturer or operator information and are therefore non-binding for us. We reserve the right to sell the goods prior to the event, our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 12,000 m² of storage space, crane capacity 70 t More than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
maximum number of results exceeded
please refine your search
