b 80 used for sale

Type: Ultrix 800 RT The Ultrix 800 RT is a multifunction machining center with 5 interpolated axes and a moving gantry for high-speed milling, turning, grinding, drilling, tapping, finishing, deburring, and roughing of complex parts. When used for turning gt; vertical lathe: - swivel range: 1100 mm - maximum weight of the workpiece: 700 kg - 40/30 kW on the table - max. torque on the table: 1500 Nm - maximum speed of the table: 1000 rpm - hydraulic clamping on table - tool taper for turning: KM63 - 150-position tool changer with 24 tool positions for turning When used for milling, grinding, drilling, ... gt; machining center: - X-axis: 800 mm - Y-axis: 900 mm - Z-axis: 600 mm - A-axis: -30° / 110° - C-axis: continuous - maximum weight of the workpiece: 700 kg - 55/40 kW on spindle - max. torque on the spindle: 22 Nm - max 40,000 rpm - tool taper for milling: HSK-E40 - 150-position to ...

gebr. Boiler ------------------------------- - mounted on frames - Manufacturer : LOOS, Gunzenhausen Type : U-HD Heating surface approx. : 14 m² Capacity : 800 kg/h Ab. Operating pressure : 10.0 bar Increased test pressure : 18.0 bar Water capacity at NW approx. : 748 l Water content full approx. : 1.108 l Year of construction : 1996 equipped with Weishaupt combi burner GL3/1-E, ZMD, 90-630 kW, gas control section, feed water pump, control cabinet and the existing coarse and fine fittings.

General SKU309T740 LocationBarneveld MakeBEBA Mischtechnik TypeBM 800 Main Features MaterialStainless steel Motor3 KW Rotor70 mm Specified Features - Foam mixer Foam mixeroscillation method Rotor/Stator with pinscheck Rotor sizesdia. 70 mm InletDN25 OutletDN25 Motor3 kW 400-690 Volt With frequency controllercheck With MonopumpNetzsch NM021RY Motor0,75 kW Netzsch NM021RY Speed301 rpm Capacity40-300 Ltr/h MaterialStainless steel 1.4571 (316Ti) Information With switchgearcheck Floorspace2,5x1,2 m Total height1,1 m CEcheck Weight680 kg Extra SpecificationsWith tank: ± 200 Ltr., with jacketFoam mixersBEBA MischtechnikMixers > Foam mixersBrand > BEBA Mischtechnik What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Bar ...

General SKU429T1358 LocationBarneveld MakeBrabender OHG Duisburg Main Features Inlet diameter15 mm L/D25 Specified Features - Viscosity test machine Single screw extrudercheck (and with double) Screw diameter± dia.15 mm L/D± 25 Number of heating zones:1 With jacketcheck Air coolingcheck Inlet± Ø 15 mm Feeding with hoppercheck Max. temperature500 °C Viscosity test machines MaterialStainless steel Information TypePlasti-Corder PL2000, Eurotherm Type 808 No.814 300 Floorspace1,45x0,55 m Total height0,8 m Weight280 kg Extra Specificationswith two diffirent extruders headsViscosity test machinesBrabenderPlastic machinery > Viscosity test machinesBrand > Brabender What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in B ...

turning diameter over bed: 840 mm turning diameter over slide rest: 640 mm turning length: 3300 mm spindle bore: 74 mm turning speeds: 7,1-1400 U/min 3-jaw chuck: 315 mm steady: rapid traverse: turning dia. in gap: 920 mm length of gap: 370 mm total power requirement: 22 kW weight of the machine ca.: 10 t dimensions of the machine ca.: 8x2x1,8 m Multifix steel holder with inserts The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. W ...

turning diameter: 820 mm turning length: 6000 mm turning diameter over slide: 520 mm Holder Multifix: control: Siemens type: 805 tailstock quill taper MT: 6 transmission ratio: 2 turning speeds: 8-1600 U/min bed width: 560 mm spindle bore: 128 mm faceplate: 600 mm 3 jaw chuck Forckrath: 400 mm steady: 250-500 mm chip conveyor: diameter of quill: 125 mm quill stroke: 280 mm total power requirement: KVA weight of the machine ca.: 12 t dimensions of the machine ca.: 9,5x2,5x2,5 m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, p ...

This DMG MORI CTX Beta 800 4a was manufactured in 2014. It features a Siemens 840 D control system, a counter spindle, and a bar machine package for enhanced versatility. The machine includes a 980-liter coolant system and a hinge type conveyor for efficient operation. If you are looking to get high-quality turning and milling capabilities, consider the DMG MORI CTX Beta 800 4a machine we have for sale. Contact us for more information about this machine.

This 3-axis DMG MORI CTX Beta 800 4a was manufactured in 2015. It features a Siemens 840 D control, a main spindle and counter spindle, and a bar machine package for efficient operations. Ideal for complex turning and milling tasks, it includes a hinge type conveyor and a coolant system with multiple pressure settings. If you are looking to get high-quality turning capabilities, consider the DMG MORI CTX Beta 800 4a machine we have for sale. Contact us for more information.

A manual clipping machine Tecno Brianza Brevetti Clippatrice H2 is available. Products: sausage products, casing types: natural casings/artificial casings/synthetic casings, clipping capacity: approx. 600pieces/h, machine dimensions X/Y/Z: approx. 1250mm/1000mm/1750mm, weight: approx. 100kg. On-site inspection is possible.

Key data: 4 , 10

Oil-lubricated piston compressor Cooling: Air-cooled design Drive: direct-driven piston compressor Including 270 litre container (painted) Performance data Volume flow 504 l/min Operating pressure max. 10 bar Nominal power motor 4.0 kW Installation data Ambient conditions min. / max. 0 / 40 °C Sound level 79 dB(A) Voltage / Phases / Frequency 400/3/50 V / Ph / Hz Dimensions and weight Length x width x height 1940 x 820 x 1600 mm Weight 150 kg Compressed air outlet coupling Capacity compressed air tank 270 lt

B&A REF: 9271 TON:800 SCREW DIAMETER: 110MM SHOT WEIGHT: 4720 STROKE VOLUME: 5160CM3 INJECTION PRESSURE: 1620AR PLATEN SIZES: 1550 X 1400MM DBTB: 1100 X 950MM MIN MOULD HEIGHT: 400MM MAX MOULD HEIGHT: 1100MM MOULD OPENING STROKE: 1080MM MAX DAYLIGHT: 2180MM EJECTOR STROKE: 350MM CONTROLS: TACTUS CORE PULLING: 3 AIR VALVES: 4 MOTOR: 37 + 37 HEATING CAPACITY:37 KW ROBOT : STYRAM S10-L SERVO SCREW DRIVE: ELECTRIC

This 5-axis DMG MORI Beta 800 TC was manufactured in 2015. It features a Siemens sl Operate 3G control, a counter spindle with a C axis, and dual chucks on both main and counter spindles. Equipped with a 48-tool HSK 63A chain magazine and a coolant system capable of 8/20 bar, its ideal for complex turn-mill operations. Consider the opportunity to buy this DMG MORI Beta 800 TC turn-mill centre. Contact us for more information about this machine.

Key data: 800 kN

Boy 80 M Year of Make: 1997 Injection unit: Screw diameter: 36 mm Injection weight: 132 g Spray pressure: 2085 bar Dosing volume: 147.6 ccm Clamping unit : Clamping force: 80 t Tiebar spacing: 410x358 mm Size of the clamping plates: 680x555 mm Ejector: hydraulic Clamping unit: toggle lever Control: Procan CT Additional equipment: Dimensions: Weight: 3200 kg Length/Width/Height: 4.14x1.21x2.07 m Drive: Pumps/motor: 15 kW Heating capacity: 10.4 kW Total power: 25.4 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

CNC Vertical Machining Center "BRIDGEPORT VMC 800" With track control Heidenhain TNC 410 Year of Make: 2000 Travels: X 800 Y 500 Z 500 Speed range: 0 – 10,000 rpm infinitely variable With the following accessories: Rigid angle table 1000 mm x 500 mm clamping surface Vertical tool changer with 20 magazine positions ( SK 40 ) Full protection cabin with sliding doors and interior lighting Various tool holders SK 40 Electronic handwheel Coolant device with reinforced pump 20 bar Chip conveyor Operating instructions

Key data: 5000 mm, 8000 mm, 4000 mm

Berthiez Vertical Turning Lathe • Year of manufacture: 1982 • CNC type: older system (CNC axes) Dimensions and Working Parameters • Table diameter: 5000 mm • Maximum turning diameter: 8000 mm • Maximum turning diameter at center: 5000 mm • Maximum workpiece height: 4000 mm • Ram travel (T): 3600 mm • Saddle travel (TA): 650 mm Speed and Power • Table rotation range: 0.6 – 60 rpm • Table motor power: 140 kW • Maximum load on hydraulic support: 160 t • Ram feed speed: 400 mm/min • Saddle feed speed: 2500 mm/min • Spindle rotation for milling: 0.01 – 0.50 rpm • Positioning speed: 0.001 – 0.50 rpm Tool Carriages 1. Hand-Operated (Primary) Carriage • Kulannum section size: 360 × 360 mm • Axial travel (CA): 2500 mm • Horizontal travel (CB): 3400 mm • Tilt range (E-F): 15° – 45° 2. Side Tool C ...

Presse à injecter NEGRI BOSSI 800 T Vector type 8000H-8400 Année : 2018 Nombres d’heures. : 25 000 heures? Commande : TACTUS? Force de verrouillage : 800 T? Diamètre vis : 110 mm? Volume injectable : 5160 cm3 Poids en PS : 4720 gr? Pression d’injection : 2020 bars? Dimensions des plateaux : 1670 x 1580 mm? Distance entre colonnes : 1100 x 950 mm? Epaisseur moule max : 1200 mm? Moteur de dosage électrique? 2 noyaux hydrauliques 4 soufflettes? Interface robot?

This 4-axis DMG MORI CTX Beta 800 4a was manufactured in 2013. It features a powerful Mailspindle ISM 102 with a speed of 4,000 rpm and an efficient 8/20 bar coolant system with a 600 L capacity. The machine is equipped with a 16-place star turret and a barfeeder for enhanced productivity. If you are looking to get high-quality turning capabilities, consider the DMG MORI CTX Beta 800 4a turn-mill centre we have for sale. Contact us for further details.

Pull-off trolley for 80cm deep pull-offs NEWagen profile 40x40mm screwedOuter dimensions: W: 126cm D: 64cm H: 184cm10 CushionsInterior dimensions: W: 118cm D: 64cmThe trolley is suitable for 80cm deep and 60cm wide ovenSee pictureWe have various large pullers and pull-offs in stockDetails see pictures

Rack Trolley Castors / Heat-Resistant Swivel Castors à ̧ 80mm NEW! ( 4 pieces )Heat-resistant wheel à ̧ 80 mmin heavy version resistant -20 to +250Âcâ  Data:Wheel à ̧: 80mm Wheel width: 35mm hole à ̧: 12mm Load capacity: 150Kg per roller ́s see picture for details 

Freezer Trolley Castors Swivel Castors à ̧ 80mm NEW!  ( 4 pieces )Swivel castors with (bright galvanized)with brakeWheel à ̧ 80 mmin heavy version resistant -30 to +80ÂC  Data:Wheel à ̧: 80mm Wheel width: 28mm Hole à ̧: 12mm Overall height: 106mm Load capacity: 150Kg per roller  ́s see picture 

Freezer Trolley Castors Swivel Castors à ̧ 80mm NEW!  ( 4 pieces )Swivel castors with (bright galvanized)with brakeWheel à ̧ 80 mmin heavy version resistant -30 to +80Âcâ  Data:Wheel à ̧: 80mm Wheel width: 28mm Plate mounting: 105x85mm Hole spacing: 80x60mmHole à ̧: 9mm Overall height: 106mm Load capacity: 150Kg per roller ́s see picture for details 

Rack Trolley Castors / Heat-Resistant Swivel Castors à ̧ 80mm NEW!  ( 4 pieces )Heat-resistant swivel castors with (bright galvanized)Wheel à ̧ 80 mmin heavy version resistant -20 to +250Âcâ  Data:Wheel à ̧: 80mm Wheel width: 35mm Plate mounting: 105x85mm Hole spacing: 80x60mmHole à ̧: 9mm Overall height: 106mm Load capacity: 150Kg per roller Details see picture

Pullers for deck ovens 80cm deep NINEew pullers / pullers for deck ovensPullers made of ALUAspullers for 80cm deep ovenPuller dimensions : W: 115cm D: 58cmDeck shop oven, deck ovenfits for Miwe, Wachtel, Friedrich and Wiesheu Fastening hook belowideal for pizza, rolls, small bread, baquettes, croissant etc. do we have various large pullers in stockDetails see picture 

Pullers with puller carriage for 80cm deep furnace NEWThe puller trolley stainless steel with 10 ALU pullerson rollersTrolley profile 40x40mm screwedOuter dimensions: W: 126cm D: 64cm H: 184cmInternal dimensions: W: 118cm D: 64cm10 pieces Pullers made of ALUAducts for 80cm deep ovenPuller dimensions: W: 115cm T: 58cmWe have various large pullers in stockDetails see picture 

x-travel: 8000 mm y-travel: 2600 mm z-travel: 1500 mm V-axis: 3000 mm control: Siemens 840 D SL Table: Schiebe- und Drehtisch 2 Stück table load: max. 20 t turning speeds: 100 U/min coolant: Tool changer: 120 pos. tool taper: SK 50 size of pallet: 2200x1500 mm spindle power: 43 kW number of tables: faceplate: 1800 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Ortho head 1x0.001 degree Turning tool holder The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can ...

Gear motor, electric motor, electric gear motor -Electric motor: for gearbox -for gear motor type: CB59-80K/4DBRF -Speed: 1380 rpm -Power: 0.55 kW -Worm shaft: Ø 20 mm -Construction: B5 -Protection class: IP 54 -Brake -Price: per piece -Number: 1x available -Dimensions: 345/210/H160 mm -Weight: 13 kg

Short-stroke heavy-duty cylinders, high-pressure hydraulics, compact cylinders, light metal cylinders, high-pressure cylinders, universal cylinders, hydraulic cylinders, straightening cylinders, hydraulic rams, hydraulic pressure cylinders, lifting cylinders, pressure rams, hydraulic short-stroke cylinders -Manufacturer: Bahco, hydraulic cylinder lifting cylinder type CR 100-200 -Stroke: 150mm -Piston: Ø 100 mm -Pressure: max. 800 bar -Number: 5x cylinder available -Price per piece -Dimensions: Ø 300 x 430 mm -Weight: 93 kg/pc.

Heat exchanger, cooling coil, cooling pipe, cooling spiral, shell and tube heat exchanger, seawater heat exchanger -Manufacturer: Funke, heat exchanger shell and tube heat exchanger -Type: BOF 806-0-4 -Contents: Jacket space 50.7 l / Tube space 22.0 l -Operating pressure: max. 16 / 10 bar -Dimensions: 2120/285/H305 mm -Weight: 146 kg

Heat exchanger, cooling coil, cooling pipe, cooling spiral, shell and tube heat exchanger, seawater heat exchanger -Manufacturer: Funke, heat exchanger shell and tube heat exchanger -Type: BOF 807-0-4 -Contents: Jacket space bronze 35.6 l / Tube space copper 15.3 l -Operating pressure: max. 16 / 10 bar -Dimensions: 2480/360/H350 mm -Weight: 236 kg

We will be happy to visit you and plan your machine. Addition, adaptation of crate bottle conveyors can be carried out by us. We can also manufacture new gripper heads.

We will be happy to visit you and plan your machine. Addition, adaptation of crate bottle conveyors can be carried out by us. We can also manufacture new gripper heads.

BANO UNIMAC 180/70CP Mod.S, reinforced structure Hopper: 1.830 x 1.300 mm, Hopper capacity: 2.340 lt. 132 KW a.c. drive Rotor: 1.700 mm wide Rotor diam.: 660 mm. Rpm: 80-140 Outer diameter: 700 mm. Outer length 1800 m. Rotor knives: 60×60 mm. Screen: 30 mm. (or bespoke) Ram stroke on 600 mm. Side ram + upper ram Hydraulic pack Dimensions LxWxH: 2400x3600x2450 Construction year 2005 The machine is offered totally and professionally reconditioned (images show the machine once reconditioned) User manual + drawings + CE, installed power - used power in work: about 60-65% : 132 kW, conditions: Reconditioned, availability: 40 days ca from confirmation , type: Single shaft

This 5-axis Breton Matrix WM 800 K25 was manufactured in 2003. It features a substantial table dimension of 2000 x 3000 mm and impressive axes strokes of 2000 mm in X, 2500 mm in Y, and 800 mm in Z. The machine has a maximum rotation speed of 24000 rpm and a rapid forward speed of 40 m/min. If you are looking to get high-quality milling capabilities, consider the Breton Matrix WM 800 K25 gantry milling machine we have for sale. Contact us for further details.

GeneralCNC Turning Centre with C axis and tool drive; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways700 mmTurning diameter410 mmTransverse stroke300 mmLongitudinal stroke850 mmMax. Turning Length800 mmClamping chuck diameter max.315 mmBar diameter max.65 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)25 kWSpeed range25 - 5000 rpmTorque (100% DC)280 NmC-Axis Speed-200 rpmTorque of C-Axis (holding torque)225 NmAccuracy at point stopping0,01 degreeTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.-4000 rpmPower max. (40% DC)11,3 kWFloor space/WeightWeight approx.6500 KgDimensions (L x W x H)3,99 x 2,69 x 1,99 mTechnologie cycle alternating speedTechnology cycle for the  ...

GeneralCNC Turning Centre with C axis and tool drive; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways700 mmTurning diameter410 mmTransverse stroke300 mmLongitudinal stroke850 mmMax. Turning Length800 mmClamping chuck diameter max.315 mmBar diameter max.65 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)25 kWSpeed range25 - 5000 rpmTorque (100% DC)280 NmAccuracy at point stopping0,01 degreeTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.-4000 rpmPower max. (40% DC)11,3 kWFloor space/WeightDimensions (L x W x H)3,99 x 2,69 x 1,99 mWeight approx.6500 KgPlug-in board with 2x4 free in-/outputsInputs / outputs programmable via M-functions, consisting of: 8 inputs 4 outputs ...

New Batch Pasteurisers custom made on request. offers new Batch pasteurisers for the Food and beverage industry. Our BPT Series is capable of Milk Pasteurisation, Ice cream mixing, Ice Cream Fermentation, Sauces, Brewery industry,etc., Applications:, - Dairy Processing: Most commonly used in the dairy industry to pasteurise milk and milk products., - Cheese Production: Used before cheese-making to ensure safety., - Ice Cream Production: Pasteurises the base mixture before it is churned into ice cream., Advantages of Batch Pasteurisation:, - Cost-Effective: Often less expensive than continuous pasteurisers for small to medium operations., - Flexibility: Suitable for small batches or varied products and recipes., - Quality Control: Allows for greater control over the pasteurisation process., Volume capabilities (litres): 800, Control panel: Stainless steel Control box, Controls, Thermomete ...

General SKU244Y171 LocationBarneveld CEcheck Main Features MaterialStainless steel Motor11 KW Inlet diameter22 mm Specified Features - Basket centrifuge Basket centrifugecheck Closed basketDuplex 2205 Capacity100 dm³ Basket sizesø 800 x 400 mm Max. loading weight125 kg Hydraulic operatedcheck Liquid outletDN100 With hydraulic unitHydra power Motor1,50 kW, 400 V, 1445 rpm With variable speed drivecheck Max. basket speed2600 rpm Max. temperature0° / 80 °C MaterialStainless steel 1.4404 (316L) Information MakeRiera Nadeu Serial10590/P19/00726 Type200D 800 x 400 PI Year of construction2020 Mounted on foundation platecheck With switchgearcheck Floorspace2,60x1,30 m Total height2,00 m Weight3400 kg Extra Specifications Maximum centrifuge factor: 3,000 g : Pressure casing: 0 / 40 mbar : Maximum allowable specific weight: 1,250 kg/m³ : Control system: ...

General SKU201P112 MakeBOLZ GmbH No.M 1107 T 4402 Year of construction1988 LocationBarneveld Pressure Working pressure jacket3 Bar Main Features MaterialStainless steel Volume11800 Ltr. Motor15 KW Specified Features - Conical mixer Conical mixercheck Capacity11800 l (gross) Largest cone diameter2900 mm Cone height4900 mm Dished topcheck Manholeø 600mm With stainless steel armcheck Top drivecheck Motorscrew +/- 15 kW (400 V) 65 rpm Motorarm 1,5 kW (400 V) 35 rpm Cantilevered screwcheck With jacket1200 l (20m2) Max. temperature100°C MaterialStainless steel 1.4552 Information Floor space3,2 x 3,2 m Total height6,5 m Weight±7000 kg Extra Specifications- used as a cooler. Feed additivesPaper & otherOther pharmaceuticsCosmeticsOrganicsSugarAnimal feedOther feedConfectionerySolid pharmaceuticsDyes & pigmentsPlastic & rubberMinerals & inorganicPlastic & polymer ...

General SKU212T119 MakeEnco LocationBarneveld Pressure Working pressure2 Bar Vacuum possiblecheck Working pressure jacket6 Bar Main Features MaterialStainless steel Volume8000 Ltr. Motor5.5 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity8000 Ltr. (max. 8650 Ltr.) Vessel sizesdia. 1800x3714 mm Dished bottomcheck Manholecheck DN450 Top connectionscheckDN50, DN100 OutletDN80 (3x) Half coil jacketedcheck (280 Ltr.) Max. temperature200 °C With paddle stirrercheck Motorcheck 5,5 kW, Speed mixing shaft59 rpm Stainless Steel Reactors MaterialStainless steel 1.4571 (316Ti) Information No.3385/50.1 Year of construction1990 Floorspace2,2x2,5 m Total height4,1 m Weight2000 kgCatalysts & fillersSolventsStainless Steel ReactorsDetergent & surf.Other pharmaceuticsCosmeticsLubricants & oleoSolid pharmaceuticsDyes & pigmentsBiopharmaceuticalRubberAP ...

General SKU212T120 MakeEnco LocationBarneveld Pressure Working pressure2 Bar Vacuum possiblecheck Working pressure jacket6 Bar Main Features MaterialStainless steel Volume8000 Ltr. Motor5.5 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity8000 Ltr. (max. 8650 Ltr.) Vessel sizesdia. 1800x3714 mm Dished bottomcheck Dished top sidecheck ManholeDN450 Top connectionsDN50, DN100 OutletDN80 Half coil jacketedcheck (280 Ltr.) Max. temperature200 °C With paddle stirrercheck (EKATO, EM 2060) Motor5,5 kW 400 Volt Speed mixing shaft59 rpm Stainless Steel Reactors MaterialStainless steel 1.4571 (316Ti) Information No.3385/42.1 Year of construction1990 Floorspace2,2x2,5 m Total height4,1 m Weight2000 kgCatalysts & fillersSolventsStainless Steel ReactorsDetergent & surf.Other pharmaceuticsCosmeticsLubricants & oleoSolid pharmaceuticsDyes & pigments ...

General SKU345S764 MakeHinke Tankbau GmbH (DE) No.8294 Year of construction2000 LocationBarneveld Pressure Working pressure3.5 Bar Vacuum possiblecheck Working pressure jacket9 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume9640 Ltr. Motor32 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity8000 Ltr. (9640 Ltr.) Vessel sizesdia.2000x2500mm Dished bottomcheck Dished top sidecheck ManholeDN600 Top connectionsDN200, DN150, DN100, DN80, DN50 OutletDN80 With jacket340 Ltr. Max. temperature-25/200 °C With paddle stirrercheck (Stelzer SDR 45-12 S) Motor2,6-32 kW 40-400 Volt Speed mixing shaft101 rpm Stainless Steel Reactors MaterialStainless steel 1.4571 (316Ti)Catalysts & fillersSolventsStainless Steel ReactorsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsLubricants & oleoSolid pharmaceuticsDyes & pigmentsRu ...

Pressure:800 t distance between columns:2560 mm stroke:1050 mm Distance table/ram, stroke up:1870 mm Table surface area:2500 x 1730 mm pressure of drawing cushion in table:300 t Die cushion stroke in table:395 mm Die cushion area in table:2300 x 1300 mm Ram surface:2500 x 1730 mm Die cushion pressure in ram:63 t Die cushion stroke in ram:150 mm Side window:1000 mm Oil volume:4300 l Power capacity:200,0 kW Dimensions (WxDxH):4,1 x 2,8 x 10,0 m Height above floor:7,0 m die cushion in table:hydraulic, controllable die cushion in ram:hydraulic, controllable

Linear slide, toothed belt axis, stroke 800, EGC-185-800-TB-KF-0H-CK, 556817, Festo, used Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Used part! The part was purchased from a spare parts warehouse of a company, is in a very good condition and fully functional. Festo linear slide, toothed belt axis, EGC-185-800-TB-KF-0H-CK, 556817, Festo, second-hand Overall dimensions: 1143x190x170mm, approx. 65kg Table 280x110mm, stroke 800mm, bore for drive shaft 32mm Ensuring the function In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the buyer, the goods can be returned within 2 weeks. We will refund the buyer only the product price paid to us. For these goods we have to exclude warranty claims of t ...

1 mixing arm with bottom discharge screw all stainless steel right-left turn 1 speed dimensions (l x w x h) : ± 2.500 x 1.050 x 1.700 mm with new control box + control (Siemens logo) all new cables

Cell wheel lock made of noble steel unused KREISEL Environmental Technology Type: ADG 630 x 800 x 21-24 Z Built: 2005 Inlet opening: approx. 800 x 500 mm Outlet opening: approx. 800 x 500 mm Cell wheel diameter: 630 mm Number of cells: 12 Cell depth: approx. 200 mm Cell wheel made of stainless steel Housing made of steel Geared motor : SEW-EURODRIVE Type :RF107 AR132S/MWEX/II3GD DV132M4/TFII36D 7.5 kW 24 rpm 230/400 V IP65 Motor Ex protected! Total dimensions: approx. 2700 x 800 x 800 mm

For sale we offer new scissor roller conveyor. Roll width 610mm Length retracted 3000mm Length extended 8000mm Height 690-1000mm Load capacity 130kg/m Available quantity: 2 pieces Other lengths available in stock: 4 and 10m Shipping worldwide Price per piece 6.700€ net plus VAT If you are interested, please contact us to confirm availability.

For sale we offer new scissor roller conveyor. Roll width 760mm Length retracted 3000mm Length extended 8000mm Height 690-1000mm Load capacity 130kg/m Quantity available: 1 piece Other lengths available in stock: 4 and 10m Shipping worldwide Price per piece 7.100€ net plus VAT If you are interested, please contact us to confirm availability.

Sinumerik 805 SM-TW with plug-in cards, New!, New, Siemens, new As good as new in original packaging! The high quality part comes from a spare parts warehouse of a mechanical processing of a large car manufacturer, is completely as new and in the original packaging. Sinumerik 805 SM-TW, consisting of: 1 piece Sinumerik basic rack, 805 SM-TW, 6FM2805-1WB00, 1 piece battery plug-in unit 6FX1410-0CX46 1 piece Sinumerik power supply, 6EW1861-3BA, 1 piece Sinumerik CPU, 6FX1138-5BB04, 1 piece Sinumerik basic memory module, without RAM, 6FX1128-1BA00 - sold! 1 piece Sinumerik 805 SM T/W software, 6FX1882-0BX22-4D, 1 piece Sinumerik 805 SM T/W basic software module 1, 6FX1882-0BX01-4D, Attention: All parts are new! These prices are absolute best prices and are only valid for the purchase of the whole position. We also sell the parts individually, see separate Ebay listings.  ...

Height rippler, parallel rippler -Max. working height: 800 mm -Price: per piece -Quantity: 2 pieces -Dimensions: 380/90/H855 mm -Weight: 7.5 kg