b 80 used for sale

Motor protection relay, relay, heating current monitoring, preheating for generators, contactor, semiconductor contactor, contactor, motor protection, monitoring relay, thermistor -Manufacturer: Schiele, motor protection relay MSS mecotron 1 C/O unused original packaging -Item no.: 2.430.801.11 -Voltage: 220- 240V AC -Number: 2x relay available -Price per piece -Dimensions packaging: 100/80/H25 mm -Weight: 0.2 kg

Transformer, transformer, converter, three-phase autotransformer, three-phase transformer, three-phase transformer, single-phase transformer -Manufacturer: Tramag Fürth, transformer type CST from injection molding machine Demag D 100-275 NC -A-No.: 80258 ID.No. 06520365 -Power: 1100 VA -Technical data: see photo nameplate -Dimensions: 240/120/H220 mm -Weight: 16 kg

Temperature controller, temperature sensor, temperature setting, signal converter, temperature converter, temperature limiter, electronic temperature controller display -Manufacturer: Kfm, temperature controller display -Type: 800 710 -Temperature range: 0...100°C -Voltage: 220V / 48-62 Hz -Quantity: 2x display available -Price per piece -Dimension: 125/100/H50 mm -Weight: 0.4 kg/pc.

Pressure reducer, pressure regulator, bladder accumulator, high pressure bladder accumulator, hydraulic accumulator, pressure accumulator, membrane accumulator -Manufacturer: Hydac, pressure accumulator from CNC machining center MAHO MH 800C -Type: SBO140-1.4E1/112U-140FT080 -Operating pressure: max. 140 bar -Quantity: 2x pressure storage available -Price per piece -Dimensions: Ø 145 x 205 mm -Weight: 3.7 kg

Servo drive, servo card, output module, CPU card, input processor, power supply, control card, input card, controller, converter, controller -Manufacturer: Indramat, AC servo controller from CNC milling machine MAHO MH 800C -Type: KDS 1.1-50-300-W1 MOD 4/1X108-091 -Quantity: 1x servo controller available -Dimension: 490/110/H390 mm -Weight: 15 kg

Servo drive, servo card, output module, CPU card, input processor, power supply, control card, input card, controller, converter, controller -Manufacturer: Indramat, AC servo controller from CNC milling machine MAHO MH 800C -Type: TDM 3.2-20-300-WO MOD 14/1X023-094 -Quantity: 2x servo controllers available -Dimension: 320/70/H390 mm -Weight: 7.7 kg

Control panel, touch screen, control panel, display, operator panel, PLC, Simatic Panel PC, touch screen, touch panel, Simatic Multi Panel, Touch Multi Panel, Touch Panel -Manufacturer: NFI Electronics, touch panel from CNC milling machine MAHO MH 800C -Type: 1435-18-22 -Total dimensions: 340/310/H30 mm -Weight: 0.8 kg

CNC control, card slot, control cards, plug-in cards, circuit boards, control rack -Manufacturer: Philips, control rack from CNC milling machine MAHO MH 800C -PCB: 4022 224 7062 -Card: 4022 224 3433 -Graphic Modem: 4022 224 3451 -Cent Proc: 4022 226 2331 -Drive Mod.: 4022 226 3645 / 4022 226 3690 -LS/LS board: 4022 226 3680 -Inp Outp Mod: 4022 226 3531 2 pieces -Power supply: 4022 226 2270 PE 1870/03 -Individual components: see photos -Price/sale: complete -Dimensions: 375/310/H340 mm -Weight: 13.4 kg

Control cabinet - cooling device, control cabinet air conditioner, distribution cabinet, heat exchanger, wall-mounted cooling device, control cabinet cooler -Manufacturer: Siemens, heat exchanger control cabinet cooling device from milling machine MAHO MH 800C -Type: 8ME 7874-DR -Voltage: 230V -Power consumption: 170W -Dimensions: 415/130/H725 mm -Weight: 14.2 kg

Tier trolleys, transport trolleys, shelf trolleys, sorting trolleys, picking trolleys, mobile shelves, tray trolleys, embroidery trolleys -Transport trolley: Commission trolley, floor trolley -Tiers: 9 borders arranged diagonally -Border dimensions: see photos -Chassis: 4 swivel castors -Total dimensions: 1000/800/H1700 mm -Weight: 103 kg

Tier trolleys, transport trolleys, shelf trolleys, sorting trolleys, order picking trolleys, mobile shelves, tray trolleys, embroidery trolleys -Transport trolley: commission trolley -Cross braces: with 2 adjustable brackets -Border dimensions: see photos -Chassis: 4 swivel castors -Total dimensions: 800/780/H1480 mm -Weight: 57 kg

Gratings, gratings, light grilles, insert grilles, insert grilles, stair steps, safety steps, grating steps, steps, perforated gratings -Grid level: perforated grid 800 x 270 mm -Total height: 70 mm -Holes: Ø 8/12 mm -Gratings: Hot-dip galvanized -Quantity: 2x grids available -Price per piece -Weight: 5,8 kg/piece

Workbench, work table, assembly bench, assembly table, work table -Manufacturer: Krieg, workbench, heavy-duty construction, mobile -Width: 2000 mm -Depth: 800 mm -Height: 850 mm -Tabletop: Thickness 25 mm -Base: 4 swivel casters, 2 with locking brakes Quantity: 9 pieces -Price per piece -Weight: 72 kg

workbench, work table, assembly bench, assembly table, work table -Manufacturer: Krieg, workbench, solid construction, mobile -Width: 1500mm -Depth: 800 mm -Height: 850mm -Table top: thickness 25 mm -Base: 4 swivel castors, 2x with parking brake -Number: 5x workbench available -Price: po piece -Weight: 37 kg/piece

Desk, height adjustable desk -Manufacturer: Palmberg, height-adjustable desk -Tool-free: height adjustable by means of removable adjusting elements -Width: 2000mm -Depth: 800 mm -Height: 680-760mm -Number: 6x desk available -Price per piece -Dimensions: W/D/H 2000/800/H720 mm -Weight: 43 kg/piece

Gear motor, electric motor, electric gear motor, spur gear motor -Manufacturer: Nord, gear motor 2 rpm -Gearbox: unfortunately no type designations i total 690 -Engine: Nord Type SK 80L/4-240 -Power: 0.75 kW / 1380 rpm -Protection class: IP54 -Shaft: Ø 75 x 140 mm -Dimensions: 840/350/H475mm -Weight: 176 kg

Platform trolley, transport trolley, heavy-duty trolley, table trolley, assembly trolley, industrial trailer, container dolly, double turntable steering, heavy-duty trailer -Handover: in current condition as viewed -Note: Note condition of wheels/platform -Heavy-duty transport vehicle: Industrial trailer with 1-axle turntable steering -Platform: 1610/800/H500 mm -Load capacity: 1.5 t -Tires: Ø 360 x 90 mm solid rubber -Total dimensions: 2850/800/H500 mm -Weight: 195kg

Clamping table, T-slot table, milling machine table, drilling machine table, boring machine table -Clamping table: Drilling machine table Milling machine table T-slot table -Table surface: 800 x 550 mm, height 195 mm -Groove width: 28 mm, groove spacing 250 mm -Dimensions: see photo technical drawing -Total dimensions: 800/550/H195 mm -Weight: 630 kg

Glass scale, glass measuring rod, scale, digital display, measuring rod, length measuring system, length measuring device, linear scale, positioning display, digital scales, digital scale for digital display -Manufacturer: Heidenhain, glass scale from milling machine Deckel FP4L -Type: LS 803 ML 1240 mm -Quantity: 1x glass scale available -Dimensions: 1345/200/H50 mm -Weight: 1.2 kg

gear motor, electric motor, electric gear motor, adjustable gear motor, variable speed gear motor -Manufacturer: Lenze HEW, adjustable geared motor -Adjustable gear: Lenze type 11 333 13 16 2 18-3.7 rpm -Gearbox: Lenze Type 12 603 16 1 1 -Engine HEW type: EEXF 80L/4 0.75 kW -Shaft: Ø 40 x 80 mm -Design: B3 -Protection class: IP 54 -Dimensions: 680/490/H320 mm -Weight: 66 kg

filter system, clean air filter, fine filter, filter, compact filter, suspended matter filter, filter cassette, cartridge filter, cassette filter -Manufacturer: DCE, cassette filter suitable for ID34372 BTR Unicell C16-2K7 -Number: 4x filters available -Price/Delivery: complete -Dimensions each: 800/100/H500 mm -Weight: 3.1 kg/piece

filter system, clean air filter, fine filter, filter, compact filter, suspended matter filter, filter cassette, cartridge filter, cassette filter -Manufacturer: DCE, cassette filter suitable for ID34372 BTR Unicell C16-2K7 -Number: 4x filters available -Price/Delivery: complete -Dimensions each: 800/95/H500 mm -Weight: 4.5 kg/piece

Position computer, computer, control unit, robot control, control, CNC control, control panel, computer monitor, screen, TFT industrial monitor -Manufacturer: Grenzebach, computer with monitor -Computer: BR Elektronik Type Mini PC 8000 -Monitor: IQ Automation Flatman TFT display type FK170SBRGD001 -Individual components: see photos -Number: 2x computers with monitor -Price/Distribution: per unit -Transport dimensions: 480/400/H210 mm -Weight: 13 kg/piece

Clamping plate, marking-spotting plate, measuring plate, measuring table, welding table, welding table, straightening plate, marking plate, straightening table -Clamping plate: with support ribs, on a solid base frame -Clamping surface: 800 x 800 mm -Table height: 930 mm -Plate thickness: 25 mm -Transport dimensions: 800/800/H930 mm -Weight: 235 kg

Geared motor, electric motor, electric geared motor, spur geared motor -Manufacturer: Nord, gear motor -Gearbox: Type SK 2080A-80 L/4 i= 16.87 -Speed: 83 rpm -Engine: Nord Type SK 80L/4 -Power: 0.75 kW -Protection class: IP54 -Shaft: Ø 30 x 105 mm -Number: 1x motor available -Price: per piece -Dimensions: 320/290/H200 mm -Weight: 21.5 kg

Heavy-duty transport rollers, machine rollers, transport trolleys, heavy-duty trolleys, tank rollers, machine transport rollers steering gear -Machine transport rollers: armored rollers 2 pieces -Load capacity: t -Support height: 48 mm -Rollers: Ø 45 x 120 mm brass -Shipping/Price: complete -Dimensions each: 805/160/H48 mm -Weight: 30 kg/piece

Separator screen, slotted screen basket, slotted screen baskets, replacement basket, replacement baskets, separator basket, separator slotted screen, separator filter grid, separator grid, separator screen for slurry separator, round screen, slotted screen -Slotted screen: separator screen -Gap dimensions: mm -Inside: Ø 129 mm -Dimensions: Ø 136 x 800 mm -Weight: 3.8 kg

Geared motor, electric motor, electric geared motor, bevel geared motor -Manufacturer: MAZ, gear motor with brake -Gearbox: Type 80D S1 i= 84 / 1 -Speed: 11 rpm -Engine: Type B REL 80S/6 K4 0.18 kW -Shaft: Ø 20 x 40 mm -Protection class: P54 -Brake: 4 Nm -Dimensions: 450/270/H200 mm -Weight: 20.7 kg

Pneumatic cylinders, air cylinders, pneumatic pistons, air pistons, standard cylinders, round cylinders -Manufacturer: SMC, Round cylinder pneumatic cylinder double-acting -Type: CD85N25-80C-B -Stroke travel: 80 mm -Piston rod: Ø 10 mm / M10 -Max. pressure: 10 bar -Quantity: 1 cylinder available -Dimensions: 220/30/H52 mm -Weight: 0.3 kg

Dust extraction blower, extraction, extraction system, dust extraction device, cyclone separator, cyclone, separator, dust separator, centrifugal separator, welding fume filter, welding fume extraction, flue gas extraction fan, filter system, cartridge dust extraction system, cartridge filter device, cartridge filter -Condition: The system is unused -Manufacturer: INFASTAUB, filter system cartridge filter with pneumatic filter cleaning -Type: AJV 800-980-22 P -Cyclone separator: made of stainless steel -Inlet opening: Ø 110 mm -Outlet opening: pneumatic shut-off valve Ø 300 mm -Dimensions: 1730/1730/H5500 mm -Quantity: 2 pieces available Price: per piece -Transport dimensions: 4 loading meters, height 1730 mm -Weight: 1120 kg

PTO shaft, drive shaft -Capacity: 1 3/8 6 teeth (Ø 35 mm) -Length: 80-100 cm -They are suitable for fertilizer spreaders, field sprayers, band or circular saws, forestry winches, log splitters, hay turners, rotary rakes, loader wagons and many other implements. -Number: 10x PTO shafts available Price: per piece -Weight: 16 kg/piece

Output module, CPU card, input processor, power supply, control card, input card, controller, edgebander, edgebander -Manufacturer: Homag Homematic -Type: 2-083-02-8075 -Type: 2083028075 -Servo-4-Axis Card -Movement.Rotation Necs.From Rev5 -Number: 1x tax card available -Price: per piece -Dimensions: 20/195/H265 mm -Weight: 0.5 kg

Manufacturer: Torwegge, Type: 8010, Year: 1998, Maschinensteuerung: yes, Motore Maschine 1: 4 +4, Conveyor: 1 Kettenmaschine, Min.-max. workpiece length in mm: 2500, Min.-max. workpiece height in mm: 6-30, Working width min-max mm: 80, Machine with controlled dogs: yes, Cam distance mm: ca.500, Feeding speed min-max m/min: 10-40, Feed stepless: yes, Overall milling units: 4+4, Moulding units swivel-mounted: 4+4, gesteuerte Fräsaggregate: no, 1st milling unit kW / rpm: 4,5/5800, 2nd milling unit kW / rpm: 4,5/5800, 3rd milling unit kW / rpm: 4,5/5800, 4th milling unit kW / rpm: 4,5/5800, Year :1998

Key data: 4200 kN, 1090 g/PS, 70 mm

Demag Ergotech 420/800 2300 with embossing function and Robot Wittmann DR 633/CNC 6-316 Prices are at: inventar-verkauf.de/id/alesco Details: Clamping force: 4200 KN Handlebar width: 800 x 710 mm Mold opening: 710 mm Control Ergocontrol NC 4 Connected load: 68KW Total dimensions: 7.9 x 2.2 x 2.5 m Total weight: 21.0 t Accessories/Equipment: Robot Wittmann DR 633/CNC 6 - 316 (XxYxZ) 900 x 1600 x 3000 servo with support and enclosure 2-fold core pull 2 I/O Embossing function retrofitted 2 x Injection Unit: Injection Unit 1 Weft volume: 891 cm Weft weight: 800gr (polystyrene) Screw diameter 60mm Injection pressure 2420 bar Injection Unit 2 Weft volume: 1212 cm Weft weight: 1090gr (polystyrene) Screw diameter 70 mm Injection pressure 1877 bar WITHOUT COOKING VACUUM CLEANER and CLAMPING DEVICE.

HERMLE UWF 802 M universal milling machine with HS 401 route control -HS 401- Track control -Travel X / Y / Z 500x430x400mm -Rigid angle table -Speed range 18-3550 rpm -Feed continuously variable in all three axes 0-1600 mm/min -Rapid traverses 0-1.6 m/min in all three axes -Vertical - Horizontal milling device -Tool holder ISO 40 -Hydraulic tool clamping -Central lubrication -Chip tray -Drive power 6 KW -Work light -Spindle protection -Documentation Dimensions LxWxH 1.9x1.8x1.9 meters / Weight: 1800Kg

Pressure total: 800 ton Ram stroke: 700 mm Slide adjustment: 600 mm Shut height (stroke down, adjustment up): 1500 mm Free frontal opening L-R: 3800 mm Free lateral opening F-B: 1450 x 1100 mm Table surface area : 3500 x 1900 mm Slide area: 3500 x 1900 mm Die cushion capacity in table: 150 ton Die cushion stroke: 250 mm Die cushion pad area: 2780 x 1570 mm Number of strokes: 7 - 18 s.p.m. Required power: 120 kW Height over floor approx.: 9510 mm Weight of machine approx.: 260 ton

travel -x axis: 880 mm travel -y axis: 630 mm travel -z axis: 630 mm control: HEIDENHAIN - TNC 426M number of spindle speeds: 12.000 U/min numbers of positions in the tool changer: (2 x 16) 32 Tool bore: SK 40 surface area: 1.250 x 700 mm table load: 600 kg Milling machining centers - universal | DMG - DMU 80T equipped with B axis The machine is in good condition. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: 80 T | 80-T The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

16 stations Hand feeding station Missed feed control Criss-cross delivery Max. format: 310 x 460 mm Min. Format: 100 x 105 mm Video available upon request

Manufacturer: Optimum Model: OPTImill F 105 CNC Sinumerik 808D ADVANCE Type of Machine : Milling Machine Condition : New Included Accessories: - CNC Tool Starter Set BT 40 - SPW 12 Clamping Tool Assortment, 58-piece - Hydraulic Milling Vise HCV 105 - 20 Liters Cutting and Drilling Emulsion AQUACUT C1 - 4th Axis Preparation Find more here - / Contact us at -

MBO K 800.2 SKTL/6 AUT year 2007 pallet feeder 6 buckles 2 knives 1 side buckle Navigator control Compressor Palamides Delta 703 year 2006 good condition in production available immediately

5-axis cnc machining center Type: Mill 800 high speed Manufacturer: Chiron Year: 2006 Control: Siemens Sinumerik 840 D Hours: 16738 X: 800 mm Y: 630 mm Z: 550 mm A: +/- 110° C: 360° Chip conveyor Tool probe Machine in good condition, fully functional, under power Find more here - / Contact us at -

x-travel: 800 mm y-travel: 600 mm z-travel: 500 mm control: Heidenhain iTNC 530 total power requirement: kW weight of the machine ca.: 8300 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Spiral mixer Sinmag SM2-80T Condition: used, functional Year of Make: 2020 Suitable for max. 50 kg flour or 80 kg dough Stainless steel boiler and spiral Automatic timer Two timers Two speed settings Digital control Reverse Mobile with brake

Seed station Kemper 800 mm Year of Make: 2001 Condition: repaired Suitable for integration into production lines up to 800 mm working width Standalone machine with its own control cabinet Adjustable spreading speed Adjustable spreading time Return belt for unused seeds Extendable mesh belt Humidification and sowing can be switched off Printing rollers at the infeed and outfeed with adjustable print height Turning station after humidification Incl. 1x spreading container and 1x extendable mesh belt

Long rolling station Lippelt 800 Year of manufacture: 2018 Working width: 800 mm Pressure roller in the inlet adjustable in height and side Knitted board, adjustable With indexing roller on transfer belt (pneumatic) Flour shaker with electrically adjustable flour quantity incl. 2 containers Pressure roller on the spout, height and side adjustable Belt speed adjustable Machine can work in stand-alone operation

Aircooled chiller/Heat pump MTA TAEevo TECH 802 159 kW/184 kW Cooling capacity: 159 kW / 45.21 tons (12/7 — 35°C) Heating capacity: 184 kW / 52.32 tons (40/45 —7°C) Year of manufacture: 2016 Options: Heat pump. Hydraulic module. Refrigerant circuit: 2 pcs. Heat exchanger: Finned evaporator immersed in tank Condenser: Copper / Aluminum Compressors: 4 pcs. Copeland ZP182KQE-TFD-477 (scroll) Type of refrigerant: R410a Number of fans: 3 pcs. (Frequency inverter) Hydraulic module: 1 pcs. water pump Lowara PLM112B14S2/355-E, expansion vessel. Dimensions: 3.54x1.25x2.2 m. Weight: 2500 kg. Working hours: 8650/7460 h. Condition: Good

max. format 34 x 35.50 cm Year of construction: 2011 Computer control with touch screen 6 Investors VF Sheet monitoring 1 CF 1 transfer feeder Stapling station with 2 stapling heads Clamp control Three-knife trimmer T3 Stacker Rima RS 1012-S

MEMMERT BE 800 incubator / oven with natural convection 70°C Capacity: 749 liters Temperature range: ambient temperature +5 °C to +70 °C Interior glass door Built-in digital temperature display 4 stainless steel shelves On wheels Power supply: 230 V Frequency: 50-60 Hz Power: 2000 W External dimensions (W) x D x (H): 119 x 75 x 161.5 cm Internal dimensions (W) x D x H: 103.5 x 60 x 120cm Tested at 37°C (36.2°C reading) and 50°C (48.2°C reading) Very stable indoor temperature, only a slight difference between the required temperature and the actual temperature

Description •Resolution 12,000 dpi •Density Dmax 4.2 •Data depth 48 bit RGB, 32 bit CMYK •Document types Supervision / Viewing • Light source xenon 75 watts •Max. scan format 600 x 538 mm •Drivers and interfaces Macintosh / SCSI incl. workstation •Weight 480 kg

General SKU070A418 MakeStork Plaatwellerij Velsen No.1308 Year of construction1979 LocationBarneveld Pressure Working pressure4.5 Bar Vacuum possiblecheck Working pressure jacket3 Bar Main Features MaterialStainless steel Volume800 Ltr. Motor11 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity1000 l, Useful 800 l Vessel sizesdia. 1042 x 1000mm Dished bottomcheck Conical bottomcheck Dished top sidecheck Manholecheck hand hole dia. 200 mm Top connectionsdia. 150 mm + dia. 40 mm + 2x dia. 25 mm Outletdia. 145 mm With jacketcheck vollume: 80 Ltr Max. temperature150°C With propellor stirrermake Ekato, type EM-060 With paddle stirrercheck Motor11,0 KW, (380/660 Volt, 960 rpm (Ex)) Speed mixing shaft99 rpm Stainless Steel Reactors MaterialStainless steel 1.4571 (316Ti) Information Floorspace1,4 x 1,4 m Total height3,0 m Weight1600 kg ATE ...