b 80 used for sale

Bosch starter motor -Manufacturer: Bosch starter motor 12 V, unfortunately without type designation -Voltage: 12 V -Teeth: 10 -Solenoid coil: Type 0331402502 -Dimensions: see photos -Overall dimensions: 340/180/H115 mm -Weight: 13.8 kg

Starter motor, diesel engine, drive motor, marine diesel engine, diesel generator -Manufacturer: Bosch, starter motor from MWM RHS 518V16 generator -Type: Bosch 0 001 510 003 -Voltage: 24V 9PS -Teeth: 11 -Dimensions: 445/150/H210 mm -Weight: 26 kg

max. paper width: 68 cm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

stations: 30 Stk. max. speed sets: 8000 /h max. paper size: 35x50 cm incl. BDF bookletmaker + trimmer The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

SPX Bactofuge for Milk Make : SPX Model : SE 355 BX -03 P2 Capacity : 10,000 Litres per hour Y.o.m : 2014 Skid mounted Condition : Very Good Included : Tools , Manual book, control panel HMI touch screen

Bartscher A120 Convection oven 2012, stainless oven, up to 300,C, timer controls, four trays, 1Ph

Pipe sealing cushion, leak sealing cushion, sealing plate, pipe sealing -Pipe sealing cushions: 23 pieces, mostly with connecting pipe -Diameter: 75 to 400 mm -Quantity/Size: see photo parts list -Price/Fee: complete -Transport dimensions. 1200/800/H300mm Total weight: 95 kg

Pipe grabs, round grabs, laying tongs, round material grabs, scissor grabs -Pipe grab: unfortunately without type designation -Pipe diameter: 610 to 900 mm -Dimension: 1320/670/H1700 mm -Own weight: 287 kg

Blume transfer roller conveyor slider 90° 1880-610-580 RA2045 Make: Running direction: both directions Roller width (RB): 580 mm Nominal/outer width frame (NB): 610 - 670 mm Length: 1880 mm Roller distance: 75-80 mm Ejector side: both sides Motor: drummotor Interroll 24V Lifter: pneumatic cylinder Currently set high: 875 mm Conveyor speed: freely adjustable with frequency converter between 0.275 and 0.667 m/s Optionally available: Light barrier scope of delivery: supports Features: condition: very good (used) Construction year: 2012 nominal voltage: 24V angle: 4x 90° Conveying length in mm: 1880 Nominal / outside width in mm: 610, 680 Roll width in mm: 580 Roll division in mm: 75-80 Driven: YES Engine type: Interroll Trommelmotor Conveyor speed m / s: 0,275 - 0,667 scope of delivery: including supports without side guides For individual, expert advice, simply get in touch with us. ...

Hydraulic press, oil hydraulic press, shear press -Manufacturer: Santenberg, hydraulic shear press -Hydraulic unit: HyPneu 0.75 kW / 100 bar -Individual components: see photos -Dimensions: 1190/910/H1670 mm -Weight: 262 kg

Thread cutting head with Strehler jaws, thread cutting die, thread cutting machine, pipe thread cutter, cutting head, bolt cutting head -Manufacturer: Ridgid, Thread cutting head model 811A 1/8 to 2 inch -Pipe size: 1/8 to 2 -Bolts: 1/4 to 2 -Dimensions: 260/240/H70 mm -Weight: 5.6 kg

Thread cutting head with chaser jaws, thread cutting stock, thread cutting machine, pipe thread cutter, cutting head, bolt cutting head -Manufacturer: Ridgid, Model 815A die head -pipe size. 1/8 to 2 -Bolts: 1/4 to 2 -Number: 2x cutting head available -Price per piece -Dimensions: 260/240/H70 mm -Weight: 6 kg/pc.

Horn, siren, bugle, bugle -Manufacturer: Brano, horn siren from pedestrian stacker JungheinrichTyp ERC 205 -Type: 321 705 012 H750 -Voltage: 24V/335Hz -Dimensions: 115/90/H60 mm -Weight: 0.3 kg

Horn, siren, bugle, bugle -Manufacturer: Brano, horn siren from pedestrian stacker JungheinrichTyp ERC 205 -Type: 321 705 003 H750 -Voltage: 24V/335Hz -Dimensions: 120/90/H75 mm -Weight: 0.3 kg

Pneumatic grease gun, compressed air grease gun, grease pump -Grease gun: pneumatic, compressed air grease gun, mobile version -Container capacity: approx. 100 liters / Ø 462 x 625 mm -Overall dimensions: Ø 606 x H1020 mm -Weight: 63 kg

Manometer, test manometer, pressure gauge with Bourdon tube, pressure and temperature measurement technology -Manufacturer: Wika, manometer -Type: 0 to 100 mbar -Screw connection: see photos -Number: 1x manometer available -Price per piece -Dimension: 140/100/50mm -Weight: 0.5 kg/pcs

Hydraulic oil tank, hydraulic oil reservoir, hydraulic tank -Hydraulic reservoir: from Butler 1200 pallet jack -Contents: approx. 11 liters -Additional parts: see photos -Dimensions: Ø 210 x 580 mm -Weight: 11 kg

I am selling an Automatic CNC Machining Center for BLOCK-HOUSE production AUER BL100. Built in 2001. Entrance table / max. element length 9.00m Trunnion cutter up to dia.200mm / 4kW Horizontal milling machine up to dia.200mm / 4kW Vertical milling machine up to dia.200mm / 4kW Automatic feed system AUER Austria BL100MS Programming Zebra Label Print TOS Svitavy PWM 45.11 End-cut Saw Rear Favorable for timber constructions! Available soon.

Foot switch, safety foot switch, foot pedal, foot controller, foot remote control, pedal controller, pedal switch -Manufacturer: Bernstain, Foot switch type F1-U1 UN -Voltage: 10A 500V-AC IP65 -Connector: 6-pin -Metal housing: with protective cover -Overall dimensions: 280/150/H760 mm -Weight: 3.3 kg

Thread cutting head with chaser jaws, thread cutting stock, thread cutting machine, pipe thread cutter, cutting head, bolt cutting head -Manufacturer: Asada, Die Head Model T20129 -pipe size. 1/2 to 2 -Dimensions: 310/280/90 mm -Weight: 6 kg

Thread cutting head with chaser jaws, thread cutting stock, thread cutting machine, pipe thread cutter, cutting head, bolt cutting head -Manufacturer: Ridgid, die head -pipe size. to 3 -Number: 1x cutting head available -Price per piece -Dimensions: 350/270/H90 mm -Weight: 7.9 kg/pc.

Strapping machine, packaging machine, strapping machine, carton stapler, stapling pliers, pliers stapler, tensioning and sealing device -Tensioning pliers: sealing device for strapping -Band width: approx. 16 mm -Staples: approx. 19 mm wide, see photo -Dimensions: 480/100/H170 mm -Total weight: 3.6 kg

Technical data of the pallet rack crossbeam: Shelving system: SSI Schaefer Type: PR 600 The scope of delivery includes: 01x Pallet rack crossbeam, second choice Material colour: RAL 5010 blue Box profile: 120 x 40 mm Truss Type: TRV1-290-124-30 CE Agraffe: 5 HK (hook) Clear width: 2,900 mm max. load per pair of trusses 3,100 kg, with the same weight. Distributed Load 02x Locking pins, new Finish: sendzimir galvanized To secure the longitudinal members against unintentional lifting Note: The trusses are as good as new, but will be offered as second-choice trusses. Due to the storage, scratches or paint chips may exist. General information about the product: This item is available for pickup only. A further desired transport or dispatch of this article is associated with additional costs, which can be requested separately depending on the pla ...

Fiber optic cable, fiber optic line, data cable, LAN cable, fiber optic cable, coaxial cable, antenna cable -Manufacturer: Bedea, coaxial cable 93 Ohm -Type: M17/90-RG 71 -Length: 200m -Price/delivery: complete -Dimensions roll: Ø 400 x 240 mm -Weight: 14.1 kg

Transformer, transformer, converter, three-phase autotransformer, three-phase transformer -Manufacturer: Bosch, three-phase transformer from CNC milling machine Mikron WF 51C/155 -Type: 100-911637 -Power: 4.5kVA -Primary: 3x380V -Secondary: 3x95/165 V -Dimensions: 335/135/H350 mm -Weight: 41 kg

Technical data of the pallet rack crossbeam: Shelving system: SSI Schaefer Type: PR 600 The scope of delivery includes: 01x Pallet rack crossbeam, second choice Material colour: RAL 5010 blue Box profile: 120 x 50 mm Truss Type: TRV1-290-125-30 CE Agraffe: 5 HK (hook) Clear width: 2,900 mm max. load per pair of trusses 3,200 kg, with the same weight Distributed Load 02x Locking pins, new Finish: sendzimir galvanized To secure the longitudinal members against unintentional lifting Note: The trusses are as good as new, but will be offered as second-choice trusses. Due to the storage, scratches or paint chips may exist. General information about the product: This item is available for pickup only. A further desired transport or dispatch of this article is associated with additional costs, which can be requested separately depending on th ...

Technical data of the pallet rack crossbeam: Shelving system: SSI Schaefer Type: PR 600 The scope of delivery includes: 01x Pallet rack crossbeam, second choice Material colour: RAL 5010 blue Box profile: 140 x 40 mm Truss Type: TRV1-290-144-30 CE Agraffe: 5 HK (hook) Clear width: 2,900 mm max. load per pair of trusses 3,750 kg, with the same weight. Distributed Load 02x Locking pins, new Finish: sendzimir galvanized To secure the longitudinal members against unintentional lifting Note: The trusses are as good as new, but will be offered as second-choice trusses. Due to the storage, scratches or paint chips may exist. General information about the product: This item is available for pickup only. A further desired transport or dispatch of this article is associated with additional costs, which can be requested separately depending on the plac ...

BOBST SP 102 - SE year 1992 A Die Cutting machine of size 72 x 102 cm Equipped with : Max. sheet 720 x 1020 mm, Min. sheet format 350 x 400 mm Pressing force 2.5 MN (250 tones), NON Strop feeder and delivery Max. speed 7500 S/Hour, Quick lock system, Suction head feeder, Cutting section Stripping section. IN VERY Good Condition ! (No Air Compressor, machine was plug on a Air Central)

Blume roller conveyor continuous weighing scale 1880-910-600 RA2046 Make: Blume Roller width (RB): 600 mm, Steel rolls Nominal/outer width (NB): 910 mm length: 1880 mm Rolls diameter: 50 mm Roller distance 80 mm Overall height: 900 mm 3x 24V Interroll drum motors Conveyor speed: freely adjustable with frequency converter between 0.22 and 0.65 m/s maximal load: 220 kg Electronics: 4x load cell: Interface, MB-150-38 ML-1106B Scope of delivery: with supports, USB converter Optionally available: Side guides on one-sided or both sides Other measuring device e.g. Metler Toledo IND400 Prices net plus VAT. ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2012 Electric data: 24V Interroll, 220-240 condition: very good (used) Conveying length in mm: 1880 Nominal / outside width in mm: 910 Roll width in mm: 600 Roll division in mm: 80 Driven: YES scope of ...

max. ram stroke: 2 - 300 mm groove width: 2 - 32 mm power capacity: 8 kW no. of strokes: 2 - 300 Hub/min throat: ca. 300 mm Max. installation height: ca. 450 mm automatic feeds: 0,01 - 0,15 mm work speed: 0 - 30 m/min return speed: 30 m/min weight of the machine ca.: 2,2 t dimensions of the machine ca.: 2,5 x 1,5 x 2,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Safety switch, safety switch, magnet door contact safety switch -Manufacturer: Schmersal, magnetic door contact safety switch, packaging 2 pieces per box -Type: BNS303-11Z -ID no.: 1032179000 -Number: 5x box available -Price per piece -Dimensions: 130/85/H45 mm -Weight: 0.2 kg/pc.

Safety switch, safety switch, magnet door contact safety switch -Manufacturer: Schmersal, magnetic door contact safety switch, packaging 2 pieces per box -Type: BNS250-11ZG -Number: 1x box available -Price per piece -Dimensions: 130/85/H45 mm -Weight: 0.2 kg/pc.

starter -Manufacturer: Bosch starter motor type 0 986 011 140 -Voltage: 12 V -Teeth: 9 -Solenoid coil: Type 0331402503 -Dimensions: 290/190/H115 mm -Weight: 11 kg

approx. 554 pieces of shelves for shelving / Berger, type Bert, 1m and 1.30m x 0.50m, 150kg, various - used - : Price per shelf: 9.-€ (net)! Minimum order: 50 pieces Manufacturer: Regalwerk / Berger Type: Bert Year of construction: approx. 2019 Depth: 49cm = Field depth: 50cm Width: approx. 1.28m (bay width 1.30m) = 434 pieces Width 1m = approx. 120 pieces Height: approx. 4cm Load capacity: 150kg Per pallet approx. 100 - 120 pieces Condition: good Available: now Location. Frankenberg / Saxony

Forged gripper, manipulator forged gripper, sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -Manufacturer: VEB, Material gripper type B04-Z10-1 -Load capacity: 1,000 kg -Wingspan: see photos -Dimensions: 280/190/H320 mm -Weight: 21 kg

Technical data for the footplate: Shelving system: Nedcon Type: NS Year of construction: 2024 -New- IMMEDIATELY AVAILABLE The scope of delivery includes: 01x Foot flap, new Material colour: RAL 5019 Capri blue Material thickness: approx. 3.50 mm suitable for frame profile width: 100 mm Total width: approx. 200 mm Total depth: approx. 93 mm Total height: approx. 43 mm Drill hole spacing: approx. 145 mm Drill hole Ø : approx. 15 mm Weight/piece: approx. 0.663 kg General information about the product: This item is available for pickup only. A further desired transport or dispatch of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

1 CALATOR inspection machine for open width knitted fabrics type BSM 2500, roller width 270 cm, working width 250 cm, entry small roll, exit small roll, with LABELTEX 86 type LBTX defect registration unit, with illuminated table

: 300 mm : 300 mm : 300 x 260 mm saw band length: 3920 x 34 x 1,1 mm table height: 780 mm band speed: 20 - 100 m/min total power requirement: 3,7 kW weight of the machine ca.: 1,65 t dimensions: 2,0 x 2,05 x 1,7 m PROMOTIONAL PRICE 2-column high-performance automatic band saws from the SBS series The SBS series impresses with its sophisticated technology, high quality and longevity and unrivaled, sophisticated standard equipment. • Modern SNC 20 control for CNC version • Frequency-controlled saw drive • Control buttons with pictograms • Work light • Powered chip brush • Hydraulic belt tension • Clamping pressure regulation • Double vice (before and after the belt) • Creep path for positioning • Bundle tension prepared electrically and hydraulically • Chip conveyor The SNC 20 control allows you to enter up to 20 different sawing tasks (length and number of pieces) co ...

Electric Scraper Manufacturer: Biax Type BS40 Very good, tested and ready for immediate use. In original metal box. The scraper is particularly suitable for: - Extreme roughing work in large-scale mechanical engineering - Steel formwork on guide beds and machine stands in turbines, gearboxes and pump construction. Technical data approx.: Power [W] 320 W Noise level [db (A)] 82 db Weight [kg] 4.7 kg Stroke rate [min¹] 0-1,600 min¹ Stroke length [mm] 0-20 mm

Grapes, fruit and berry press -Juice and pomace tub on sliding table, (pomace tub with auger, juice tub with pump and control) -Central filling as well as fixed cleaning line -New Prestuch in 2022 -New drainage hoses, stockings in 2021 -New lid seals in 2022 -Various electrical components in control renewed 2021 -Matching pre-juicer to go with it.

Transport trolleys, pipe frame trolleys, drum trolleys, drum tippers -Barrel trolley: Barrel tipper for 200 liter barrel -Barrel support: 2 metal rollers Ø60 x 400 mm -Wheel equipment: 2 castors, 2 wheels -Bracket: for drip tray -Dimension: 990/610/H680 mm -Weight: 20 kg

PLC control, electronic control card, control card, output card, controller -Manufacturer: Siemens pilz, FLASH control card PC 612 C/2 -Type: PC 612 F B1300-C480 -Order No.: 304073 -Dimensions cardboard: 90/70/H15 mm -Weight: 0.1 kg

Bag Clipper P+S Mako BFS30C-C/2005 -Bag clipper, bread bag, noodle bag, etc -Manufacturer: P+S Mako Verpackungsmaschinen GmbH Pfizenmaier & Söhne -Type: BFS 30C-C -Stainless steel machine -Operating voltage: 3V 400 50Hz -Year of construction 2005

Technical data for the footplate: Shelving system: Nedcon Type: NS Year of construction: 2024 -New- IMMEDIATELY AVAILABLE The scope of delivery includes: 01x Foot flap, new Material colour: RAL 5019 Capri blue Material thickness: approx. 5.00 mm suitable for frame profile width: 120 mm Total width: approx. 220 mm Total depth: approx. 94 mm Total height: approx. 43 mm Drill hole spacing: approx. 180 mm Borehole Ø : approx. 20 mm Weight/piece: approx. 1,020 kg General information about the product: This item is available for pickup only. A further desired transport or dispatch of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

Used Buchi vacuum evaporator model Rotavapor R-210. Year of construction 2014. Water bath: 20-95 degrees C Flask capacity: 50-4000 ml Equipped with: vacuum controller, vacuum pump, cooler, thermostat.

Turntable Bausch + Ströbele further information on request

Key data: 6 mm

Type : K 30 – 120 Specifications: Sheet thickness 6 mm at 400 N/mm² 4 mm at 600 N/mm² Cutting length 200 mm Angle adjustment from 30 - 120 ° Drive power approx. 4 KW

Pipe grabs, round grabs, laying tongs, round material grabs, scissor grabs -Pipe grab: unfortunately without type designation -Pipe diameter: approx. 400 to 750 mm, see photos -Dimension: 930/470/H1140 mm -Own weight: 124 kg

Pipe grabs, round grabs, laying tongs, round material grabs, scissor grabs, pipe laying equipment -Manufacturer: Dolezych, round material gripper type RZ SCH -Gripping width: 100 to 350 mm -Load capacity: 1000 kg -Dimension: 825/390/H550 mm -Own weight: 36 kg