b 2 b used for sale

Used boiling kettle BASTRA, 400 L - Heating type: Electricity - With separate MC 30 control - Boiler capacity: 400 litres The unit has been serviced annually and is in good condition. More pictures and information on request. Visits and test runs are possible by arrangement.

Single-station machine for containers up to 1 ltr. Extruder S 50/20D. Single head, programmed. 380V 50 Hz. Available now!

Machine Benhil 8345 Model. 8345 Capacity up to 90 packets/min Pack size 500 gr Dimensions 150 x 95 Product Butter, margarine, etc. Wrap material Aluminium foil or parchment paper in reels. Product Feed Hopper with Screws Photocell Foil Centering unit Weight 2.000 kg (gross) Dimensions Approx. 200 x 150 x 200 cm (l x w x h) Electricity 2,2 kW

Precision wedge shoes BILZ - PKA 4 Payload 7,700 kg screw-on with insulating plate B4 Overall height 63 mm in central position Adjustment range +4 / -6 mm Size 200 x 200 mm Female thread M20 Weight 9.5 kg - New - unused - 6 pieces in stock Unit price

We sell our PPK baler. the main pump and auxiliary pump were replaced this year 2024. Invoices are available. The press only pressed cardboard boxes. It can be demonstrated and put into operation at any time.

spindle diameter: 105 mm x-travel: 2100 mm y-travel: 1500 mm z-travel: 1400 mm Table area: 1750x2000 mm turning speeds: 16-1400 U/min table load: max. 4 t weight of the machine ca.: 18 t The techn. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About usMore than 400 of our own machines in the warehouseMore than 12,000 m² of storage space, crane capacity 70 tMore than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company,then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 150 mm x-travel: 7200 mm y-travel: 3800 mm Plate area: 9000x6000 mm digital readout: AEG ram: diameter: 440 mm ram: horizontal adjustment: 1000 mm spindle travel: 1500 mm threading cutting device:: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Panel is optional and we charged extra The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 102 mm x-travel: 1600 mm y-travel: 1000 mm z-travel: 1600 mm Control: Heidenhain type: TNC 410 table surface area: 1000x1120 mm Table load: 3000 kg spindle stroke: 710 mm spindle turning speed range: 4-1600 U/min main drive motor: 13 kW total power requirement: kW weight of the machine ca.: 12 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 102 mm x-travel: 1600 mm y-travel: 1210 mm z-axis: 1475 mm spindle travel: 710 mm B-axis (table): 360 ° Table dimensions: 1250x1400 mm Table load: 3500 kg T-slots: 22H7 T-slot - distance: 125 mm spindle turning speed range: 4-1600 U/min spindle drive: 16,5 kW Control: total power requirement: 47 kW weight of the machine ca.: 9,25 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 125 mm x-travel: 2500 mm y-travel: 1900 mm w-axis: 1100 mm radial face slide travel: mm table adjustable: 1000 mm digital readout: Pfillips workpiece: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tube diameter: 45 mm wall strength: 2 mm bending radius min.: . mm Control: total power requirement: kW weight of the machine ca.: 1,7 t dimensions of the machine ca.: 5x0,85x1,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Ball valve internal thread -Internal thread: 2 -Full bore, solid sphere -Quantity: 195 pieces in stock -Packaging unit: 12 pieces -1 carton at: 84.00 euros -Price shown: piece

Replacement - Base -Base: IB ST ZF 24 DO 32/2 -Decentralized Interbus-S ORD. NO. - 2750170 without module electronics -Quantity: 36 pieces in stock Price: 18 euros each

IBS bus terminal -Interbus ST bus terminal: 24 V DC with 8-pin mini-Combicon connector -consisting of: terminal block with screw connection and module electronics -Number: 19 modules available -Price: per piece -Dimensions: 115/45/H115 mm -Weight: 0.2 kg/pc.

Reflective light barrier, light barrier -10-40 V DC Price: per piece -Quantity: 5 available -Weight: 0.3 kg

portable oxygen breathing apparatus for tunnel boring -for: Herrenkecht tunnel boring machine -System-No: 009-07-06 -in: 2x aluminum cases -various hoses -Transport weight: 100 kg

Counter support, counter bearing, bearing block, pillow block bearing, bearing for milling machine -Dovetail: 144 x 184 mm, 30 mm high -Drawing with the photos -Dimensions: 270/130/H195 mm -Weight: 12 kg

Base plate, construction fence base, barrier base -Quantity: 16x made of plastic -TL-Footplate -K1 Dimensions: 800 x 400 mm -Insert pockets: 40 x 40 mm, 60 x 60 mm, 2x Ø 42 mm -Suitable for: shaft pipe, construction fence or barrier fence

Three-phase electric motor with brake BALKANCAR, ZAE KK 1204 - 4A ( KK1204-4A ) 0,0,0 18 kW 1440 rpm 220 / 380 V IP44 shaft diameter: Ø 10 mm Flange diameter: Ø 135 mm New !' Dimensions: 220 x 175 x 135 mm

Reflective photoelectric sensor, optical sensor -Type: BES M08MD-GNX10B-EV02-EEX Quantity: 15 available Price: per package -Weight: 0.2 kg

Foam block for device installation channel, small flexible foam block -Type: FBA-BK -Item No.: 7202 496 Price: per piece Quantity: 10 available -Dimensions: 75/120/H50 mm -Weight: 1 kg

Linear bearings, guide carriages -Condition: unused -Type: SHS25C1SSC1(GK) Block -Number: 2x linear bearings available Price: per piece -Weight: 0.8 kg/piece

Terminal boxes, aluminum housings, housing systems, Klippon -Type: 07-5107 -EX: protected Price: per piece -Quantity: 7x Available -Weight: 0.4 kg

Counter holder, counter bearing, bearing block, pillow block, bearing for milling machine -Dovetail: 118 by 160 mm 32 mm high -Drawing with the photos -Number: 1x counter bearing available -Price: per piece -Dimensions: 340/95/H220 mm -Weight: 15.4 kg

Counter holder, counter bearing, bearing block, pillow block, bearing for milling machine -Swallowtail: 75 by 110 mm 25 mm high -Drawing with the photos -Dimensions: 215/70/H200 mm -Weight: 10 kg

Throttle valve, proportional throttle valve block installation, pilot operated BOSCH 0811 402 642 ( 0811402642 ) FESXE50CA-1X/980LK0B1M 315 bar 24 V DC with built-in electronics (OBE) and inductive displacement transducer New ! Dimensions: 220 x 140 x 300 mm

Key data: 530 mm

Automatic machine with mitre Cutting Area 90° round 530 mm 90° flat 530 x 800 mm 45° flat 530 x520 mm 30° flat 530 x 320 mm Cutting angle 45°-0°-60° Saw motor 3.0 kW Belt speed 20 - 120 m/min, infinitely variable Equipment: - 99 Programs - Machine stand with chip loading tray - Hydraulic cutting pressure regulation - Stepless speed adjustment - Hydraulic guide arm adjustment - Minimum quantity lubrication - Shutdown at the end of the cut and retraction behind Movable jaw - Chip brush running along - Hydraulic mitre adjustment - Hydraulic vise clamping - Hydraulic saw blade clamping - Instruction manual

Horizontal Baller for SALE/RENT BAUER 300 Baller is in good working condition (was used in printing house)! Technical specifications: Installation of the secondary raw material baler Manufacturer: BAUER Model: 300 Year of production: 1994 Power: 22 kW Kledex Dk S Asm Aty Atjl Pressing force: 40-50 t The dimensions of the baler are 10,300 x 2,000 x 3,000 mm Tipping weight: ~ 400 kg PRICE AVAILABLE UPON REQUEST! ----- Verkaufen/Mieten Ballenpress BAUER 300 Technische Daten: Bsbmeycfv Iecbw Nvswh Installation der Sekundärrohstoffpresse Hersteller BAUER Modell 300 Produktionsjahr 1994 Leistung 22kW Druckkraft 40-50 t Die Abmessungen der Presse betragen 10300 x 2000 x 3000 mm Kippen Gewicht ~ 400 kg PREIS BEI ANFRAGE!