b 2 b used for sale

Hydraulic power unit, hydraulic pump, hydraulic pump -double pump -Max. pressure: 60/200 bar -Liter flow rate: 6/24 l/min -Motor power: 5.5 kW -Speed: 1445 rpm -Hydraulic valves -Hydraulic tank -Hydraulic filter -Weight: 230 kg

Machine vice, sturdy vice, drill press vice -Vise: rotatable -Jaw width: 175 mm -Clamping depth: max. 270 mm -Dimensions: 630/450/H175 mm -Weight: 55 kg

Machine vice, sturdy vice, drill press vice -Jaw width: 170 mm -Clamping depth: max. 240 mm -Dimensions: 650/350/H130 mm -Weight: 40 kg

Three-jaw chuck Three-jaw lathe chuck -Mouth size: Ø 200 mm -without interchangeable jaws -Weight: 16 kg

Rotary hammer, chisel hammer, combination hammer, Bosch hammer -Drilling/Chiseling -SDS Plus: Recording -Transport case -Weight: 5 kg

geared motor, electric motor -Speed: 121 rpm -Power: 0.75 kW -Design: B5 -Shaft diameter: Ø 25 mm -Brake: 24 V -Protection class: IP 65 -Weight: 30 kg

geared motor, electric motor -Speed: 36 rpm -Power: 0.75 kW -Design: B5 -Shaft diameter: Ø 30 mm -Brake: 24 V -Protection class: IP 65 -Number: 6x geared motors available Price: per piece -Weight: 36 kg

geared motor, electric motor -Speed: 36.5 rpm -Power: 0.75 kW -Design: B5 -Shaft diameter: Ø 30 mm -Brake: 24 V -Protection class: IP 65 -Weight: 36 kg

geared motor, electric motor -Speed: 36.5 rpm -Power: 0.75 kW -Design: B5 -Shaft diameter: Ø 30 mm -Brake: 24 V -Protection class: IP 65 -Weight: 36 kg

geared motor, electric motor -Speed: 76 rpm -Power: 0.37 kW -Design: B5 -Shaft diameter: Ø 25 mm -Brake: 24 V -Protection class: IP 65 -Weight: 26 kg

geared motor, electric motor -Speed: 28 rpm -Power: 0.75 kW -Design: B5 angle -Shaft diameter: Ø 40 mm -Brake: 24 V -Protection class: IP 65 -Weight: 55 kg

brake motor, electric motor, three-phase motor -with: integrated frequency converter -Power: 0.75 kW -Speed: 1420 rpm -Design: B14 -Shaft: Ø 19 mm -Brake: 24 V -Protection class: IP 65 -Weight: 15 kg

geared motor, electric motor -Speed: 88 rpm -Power: 2.2 kW -Design: B5 -Recess: Ø130 mm -Bolt circle: Ø 165 mm -Shaft diameter: Ø 30 mm -Brake: 24 V -Protection class: IP 65 -Weight: 55 kg

geared motor, electric motor -Speed: 76 rpm -Power: 0.37 kW -Design: B5 -Shaft diameter: Ø 25 mm -Protection class: IP 65 -Weight: 23 kg

geared motor, electric motor -Speed: 2.5 rpm -Power: 0.11 kW -Design: B5 -Shaft diameter: Ø 25 mm -Brake: 24 V -Protection class: IP 65 -Number: 2x geared motors available Price: per piece -Weight: 22 kg

Two-jaw chuck, 2-jaw chuck, vise, faceplate -exciting: centric -Mouth size: Ø 200 mm -Weight: 19 kg

Manometer, pressure gauge with Bourdon tube, pressure-temperature measuring technology -Screw connection: G 1/2 -Display: up to 4 bar -Quantity: 6 available Price: per package -Weight: 0.6 kg

Manometer, pressure gauge with Bourdon tube, pressure-temperature measuring technology -Screw connection: G 1/2 -Display: up to 6 bar -Quantity: 2 available Price: per package -Weight: 0.6 kg

5/2 way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block -Type: 0 820 231 004 -Price: per piece -Quantity: 1x Available -Weight: 0.3 kg

5/3-way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block -Type: 0 820 235 101 Price: per piece Quantity: 3 available -Weight: 0.3 kg

5/3-way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block -Type: 0 820 221 012 -Price: per piece -Quantity: 2 available -Weight: 0.5 kg/piece

Working width: 4500 mm Working height: 3000 mm Number of cylinders: 6 St. Dimensions (L/W/H): 5500x1400x3550 mm Weight: 3000 kg S&S frame press Bavaria 2000 L, built 2026 --------------------------------- SHORT TIMED availabe exw warehouse Engelfried, 73447 Oberkochen NEW for the Holz-Handwerk 2026 trade fair in Nuremberg: Now also with semi-automatic positioning of the vertical press cylinders 1, 2, and 3 via enabling switch, including ON/OFF selector switch for beam 2 With automatic pressing cycle + manual control for corner connections tenon+slots and dowel connection/mortised tenon, can be switched using a selector switch on the control cabinet. With basic equipment for optional use of counter profiles if the sash is rebated on the loose part. CE version Basic machine in the strongest frame welded construction, with thick-walled special hollow profiles. Guideways of the pressure beam ...

Power distribution box, construction site power distribution box, connection cabinet -Assembly -NFI circuit breaker -Main fuse -1x socket: 63 A -Dimensions: 550/550/H850 mm -Weight: 20 kg

hydraulic unit, hydraulic pump, hydraulic pump -max. pressure: 200 bar -Liter output: 6 l/min per pump -Drive: 0.55 kW 1360 rpm -hydraulic tank -Number: 4x units available -Price: per piece -Weight: 95 kg

BRETON Contourbreton NC 260 K23 stone machining center was built in 2010 in Italy by Breton S.p.A.. The machine is used for the efficient machining of natural stone slabs and blocks with a maximum weight of 4000 kg. It enables a number of advanced operations to be performed, such as milling, profiling, bevelling and hole drilling. All these machining processes are performed fully automatically, while maintaining the high repeatability and quality of the manufactured parts. The reliable spindle, operating at a maximum speed of 9000 rpm, moves in three numerically-controlled axes. This enables precise positioning of the tool relative to the workpiece during the machining. All axes, driven by powerful motors, achieve a high feed rate and dynamics, which in turn translates into increased production efficiency. All of this makes the offered Contourbreton NC 260 K23 CNC machining center for ma ...

Engine Brand: FORD, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Blue , Turbo Type: None Mounted , Exhaust System: Dry , ECU Present?: no , Rated Power: 56 Kw, Rated Speed: 1800 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/pumps/ford-2714e-pump-550-bar-used/17875, , = More information =, , Type number: 2714E POMP 550 BAR

Engine Brand: CATERPILLAR, Conditie: RECONDITIONED, Nominal Power @ Nominal Rpm: 349 Kw, Engine Injection Type: DIRECTE INJECTIE , Engine Aspiration Type: TURBO INTERCOOLER , Air Cooling Type: LUCHTGEKOELDE INTERCOOLER , Nominal Rpm @ Nominal Power: 1800 Rpm, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Yellow , Flywheel Housing SAE: NO SAE SIZE , Flywheel SAE: No Flywheel , Engine Condition: Rebuild , Turbo Type: None Mounted , Exhaust System: Not Mounted , ECU Present?: no , Starter Voltage: No Starter Present , Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/catalog/product/view/id/217790, , = More information =, , Type: Engine, Type number: TXH-2816452; Transport weight [kg]: 1015

Engine Brand: DEUTZ, Condition: NEW, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Grey , Flywheel Housing SAE: SAE 2 , Flywheel SAE: Unknown , Engine Condition: New , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 24 Volt , Rated Power: 186 Kw, Rated Speed: 2300 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/deutz-bf6m1013-25t3r-new/1 84, , = More information =, , Type: Engine, Type of fuel: Diesel, Type number: BF6M1013-25T3R; Transport weight [kg]: 735

Details: - Manufacturer : BALJER / Zembrod - Type: AS/28H-R.D - Year of Manufacture: 1994 - Condition : used Find more here - / Contact us at -

Drive: . kW Capacity: . kg/h material: . 6 pieces Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us: More than 400 of our own machines in the warehouse More than 12,000 m² of storage space, crane capacity 70t. More than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company,then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used cutter manufactured by Nowicki model KS B110 type 276 MM. New 2008. Zinastalled power 18.5 kW. Power supply 3x400V/50Hz. Max current 45A. Weight 500kg. Material - stainless steel.

Key data: 500 mm, 200 mm, 77 mm

Binder 500x200 Complete System Electric 220V Magnet Clamping Plate Milling Grinding Total weight approx. 50 to 60 kg. Good used condition, full function. Includes switch and control cabinet. The connection on the control box can be connected directly to 220 volt luminous flux and can therefore also be used universally on the milling machine. The actual magnet has 110 volts. Very long power cord, about 7-8 meters. The rotary switch only works to the right. That is how it should be. Always switches every 180 degrees every function. You will receive an invoice in paper form. Differential taxation according to paragraph 25a of the German VAT Act. Therefore, no VAT is shown on the invoice.

200 litre stainless steel tank Manufacturer : Ahrens & Bode Pressure vessel Content: 200 litres Technical specifications : cylindrical stainless steel container on feet, single-walled Conical spout Operating pressure up to 5 bar Metrics: ca. Diameter: 360 mm, diameter lid 500 mm, cone 400 mm Cylindrical height: 1,840 mm Enema: 3x DN 50 Discharge: DN 65 Documents: Nameplate

Bous Cleaning system degreasing - The Bous Trowamat RL 200 CP V is a compact and efficient cleaning system designed for cleaning and degreasing smaller concrete tools and equipment, such as hand trowels, floats, and other handheld construction tools. It is part of Bous GmbH´s line of cleaning machines, which are widely used in the construction industry for maintaining and prolonging the life of equipment. Find more here - / Contact us at -

Refrigerant compressors system Bitzer Type: 6J-22.2Y (x1), 6JE-25Y-40P (x2) Volume: 95.3 m3/h (x3) Cooling capacity for R404A: 191.1 kW at -5°C/40°C, 156.3 kW at -10°C/40°C, 78.4 kW at -25°C/40°C Dimensions: 2700 x 850 x 1950 mm Items in magazine: 1 Reference number: Z89 Condition: Used Price on request. We have many others machines for meat industry and cooling - handtmann, seydelmann, viessmann, bitzer, copeland, . Check our offers.

ID3475 Binder ES/DD 2500x5 year/Baujahr 2019 Coarse sieve, double decker (45/65 perforation), housing has cracks, incl. motor and supports Coarse strainer, double-decker (45/65 perforations), housing has cracks, incl. motor and supports

Used biscuit line for round, square and hot dog buns BERTUETTI, type: 200 Universal - for round, square and long-rolled rolls, such as HotDogs - 4 rows - 1, 2 or 4 rows can be used - with settling on sheet metal - Dough intake - Sowing - Good condition, ready for immediate use Visits and test runs are possible by arrangement.

turning diameter: max. 480 mm turning length: max. 2.000 mm control: Sinumerik 840 D Siemens swing diameter max. over bed cover: 520 mm Main spindle:: turning speed range - main spindle: 7 - 2.800 min/-1 transmission ratio: 2 power capacity - main spindel: 53 kW max. Torque: 3.456 Nm spindle nose: 11 DIN 55026 chuck diameter: 315 mm spindle bore: 103 mm usable bar diameter: 82 mm axis stroke:: x-travel: 405 mm z-travel: 2.049 mm Tailstock:: diameter of quill: 100 mm quill stroke: 100 mm tension force: 14 kN capture: 30 DIN 2079 feeds:: rapid traverse: 10 m/min Working speed: 0,1 - 10.000 mm/min feed power: 15 kN Tool Mount:: number of toolpositions: 12 pos. driven statition: 6 pos. Shank diameter: 50 mm power capacity: 5,4 kW Max. Speed: 2.500 / 625 min/-1 max. Torque: 25 / 100 Nm total power requirement: ca. 50 kW weight of the machine ca.: 14 t dimensions of the machine ca.: 6,4 x ...

cutting diameter: 215 mm band length: 400 mm stroke: - mm total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: - m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

5/2 way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block, changeover directional valve, valve -Manufacturer: Bosch, Directional control valve -Type: 0 810 091 288 -Pmax: 315 bar -Quantity: 1x valve available -Dimensions: 215/46/H75 mm -Weight: 1.9 kg

: 230 mm : 2730 mm : 320 mm : 230 mm : 320x130x mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used Tetra Pak TBA 19 / 200 ml Base Filling Line Reliable Tetra Pak carton filling line designed for packaging liquid and high-viscosity food products in 200 ml Base cartons. The line includes the TBA 19 filling machine equipped with a high viscosity aseptic kit, making it suitable for products such as tomato paste and similar viscous food products. Line Configuration - The filling line consists of the following equipment: - Used Tetra Pak Filling Machine – TBA 19 / 200 ml Base - Used Tetra Pak Cardboard Packer – TCBP 70 - Conveyor System (to be designed according to factory layout) Tetra Pak Filling Machine General Information - Manufacturer: Tetra Pak - Model: TBA 19 - Year of Manufacture: 2003 - Package Format: Base Technical Specifications - Capacity: 7,500 packs per hour - Package Volume: 200 ml - Working Hours: 15,698 h Special Equipment - High vis ...

Bobst Flexo 200 5 colours flexo printing machine for corrugated board 5 flexo printing units Prefeeder Automatic Delivery Machine is in a very good condition Available immediately Location: Western Europe Manufacturer: Bobst SA Switzerland Type: Flexo 200 Year of manufacturing: 1988 Max. Sheet size: 1270 x 2032 mm Min Sheet size: min. 600 x 520 mm Max. printing area: max. 2032 x 1270 mm Material thickness max. : 9 mm

Cold work tool steel 4 pcs Diameter 299 Length 232mm Weight 191.5kg Wnr. 1.2379, X153CrMoV12 EN/ISO 4957 forged, annealed, peeled, or overturned, round DIN 7527 Bl.6

Baader 200 Fish Filleting Machine is overhauled, specifically designed for producing fillets of salmon, trout, and similar fish species. It is well known for its high processing capacity, precision, and reliability. This machine is used in fish processing plants around the world to automate the filleting process, improving efficiency and reducing labor costs. Manufactured by Baader, a well-known German company specializing in fish processing equipment. It efficiently processes both gutted and headed fish, with the option to include or exclude the collar bone. The Fish Filleting Machine ensures that the fish is fed through the tools in a manner that minimizes stress, and guaranteeing a smooth surface on the fillets. In the case of salmon, the machine can produce fillets with or without the collar bone, and with suitable adjustments, it can also process salmon sides while retain ...

2x Water Pumps NEW 22kW 230m³/h H: 22.5m n: 1450 min LENZE electric motor type MDERAXX180-32J 22kw 1470min

Key data: 250 °C, 8 kW

This temperature controller can heat up to 250 degrees with oil medium. It can also be used for injection molding tools, extruder screws, and metal processing machines. Everything works perfectly. Pump, heating, heat exchanger and control are good. I have 1 of these, but there are also other types of temperature controllers for lower temperatures and other machines in the plastics industry. Please see my other ads.

81 pallets with scrubbing disc List on request Total weight approx. 60 ton net Total quantity approx. 160,000 pieces VE date 2025/2026 Price on request