b 2 b used for sale

ELEKTRISCHER KASTENOFEN Verwendungszweck : Pulverhärtung Maximale Temperatur : 220ºC Das Heizsystem des Ofens ist als Zwangskonvektionssystem ausgelegt. Es basiert auf dem Prinzip, dass die Luft des Ofenvolumens mit Hilfe eines Umwälzgebläses in den Ofen gepumpt wird und die Ofentemperatur durch die Wärmeübertragung der Luft, die durch die Heizeinheit strömt, erhöht wird. Die Wände des Ofens und der Heizeinheit bestehen aus modularen Blechen und hochdichten Isolierplatten. Luftverteilungskanäle mit regulierbaren Klappen im Inneren des Ofens sorgen dafür, dass die Ofentemperatur an jedem Punkt gleichmäßig ist. Die Temperaturregelung ist digital und ermöglicht eine präzise Einstellung der Ofentemperatur. Die Heizeinheit wird seitlich, hinten oder oben am Ofen angebracht und besteht aus einer isolierten Heizkammer, einer Heizzelle mit Widerstand im Inneren, eine ...

Pneumatic cylinder, standard cylinder, air cylinder, pneumatic piston, air piston -Stroke travel: 200 mm -Piston diameter: 43 mm -Piston rod: 25 mm -Total length: 390 mm -Total length extended: 590 mm -Price: per piece -Quantity: 2 available -Dimensions: 100/100/H390 mm -Weight: 6.5 kg/piece

Pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp -Stroke: 200 mm -Piston diameter: 60 mm -Piston rod: 32 mm -Total length: 425 mm -Total length extended: 625 mm -Price: per piece -Number: 2x available -Dimensions: 150/150/H425 mm -Weight: 12.1 kg/piece

• Hydraulic lifter • S/S-style • Load 120 kg • Lifting height appr. 1,20 m • Drum holder Ø 400 mm • Rotatable, tiltable upwards • Length of arm 820 mm • Mobile • Protection class EEx eII CT4 • Electrical connection 400V/50Hz/0,75kW

Model: 25tm Power supply: 380 V / 50 Hz Speeds: 2 Country of origin: Italy

Three-jaw chucks, three-jaw lathe chucks, power chucks -Chuck size: Ø 250 mm -Short taper mount for: bayonet mount, taper size 8 -Weight: 41 kg

UPS Effekta Pegasus 200 kVA Uninterruptible power supply 3 phases Batteries were renewed 06/2019 and are tested all still have between 12.9 and 13.0 V and that after 3 months, are stored on a separate pallet the power supply is in 1A condition and does not come from the manufacturing industry 2 months return policy

PTC thermistor relay, contactor, semiconductor contactor, contactor -Type: PLC-BSC-24DC/21-21 -Number: 10x relays available -Price: per piece -Weight: 0.07 kg

Gebrauchte Maschine, in gutem Zustand.

Sell a Budmasz WEB 200 concrete and screed cutter. Working width: 195mm Drive Type: Electricity Suction possible. The machine is in good condition, functional and tested.

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 600 mm -Piston diameter: 50 mm -Piston rod: 20 mm -Total length: 775 mm -Total length extended: 1375 mm -Dimensions: 65/65/H775 mm -Weight: 6 kg

Blume transfer roller conveyor slider 90° 1880-610-580 RA2045 Make: Running direction: both directions Roller width (RB): 580 mm Nominal/outer width frame (NB): 610 - 670 mm Length: 1880 mm Roller distance: 75-80 mm Ejector side: both sides Motor: drummotor Interroll 24V Lifter: pneumatic cylinder Currently set high: 875 mm Conveyor speed: freely adjustable with frequency converter between 0.275 and 0.667 m/s Optionally available: Light barrier scope of delivery: supports Features: condition: very good (used) Construction year: 2012 nominal voltage: 24V angle: 4x 90° Conveying length in mm: 1880 Nominal / outside width in mm: 610, 680 Roll width in mm: 580 Roll division in mm: 75-80 Driven: YES Engine type: Interroll Trommelmotor Conveyor speed m / s: 0,275 - 0,667 scope of delivery: including supports without side guides For individual, expert advice, simply get in touch with us. ...

Gear motor, electric motor -Speed: 9.7 rpm -Power: 0.37 kW -Construction: B5 -Brake: 24 V DC -Diameter shaft Ø 40 mm -Protection class: IP 65 -Number: 1x available -Dimensions: 690/300/H230 mm -Weight: 52 kg

1 CALATOR inspection machine for open width knitted fabrics type BSM 2500, roller width 270 cm, working width 250 cm, entry small roll, exit small roll, with LABELTEX 86 type LBTX defect registration unit, with illuminated table

Bag Clipper P+S Mako BFS30C-C/2005 -Bag clipper, bread bag, noodle bag, etc -Manufacturer: P+S Mako Verpackungsmaschinen GmbH Pfizenmaier & Söhne -Type: BFS 30C-C -Stainless steel machine -Operating voltage: 3V 400 50Hz -Year of construction 2005

Used Buchi vacuum evaporator model Rotavapor R-210. Year of construction 2014. Water bath: 20-95 degrees C Flask capacity: 50-4000 ml Equipped with: vacuum controller, vacuum pump, cooler, thermostat.

Gear motor, electric motor, electric gear motor -Speed: 24/48 rpm -Power: 0.15/0.2 kW -Construction: B3 -Diameter shaft: 20 mm -Protection class: IP 54 -Dimensions: 335/170/H180 mm -Weight: 12.1 kg

geared motor, electric motor -Speed: 40.5 rpm -Power: 0.55 kW -Design: B5 -Shaft diameter: Ø 25 mm -Protection class: IP 65 -Dimensions: 445/230/H210 mm -Weight: 26 kg

geared motor, electric motor -Speed: 61/122 rpm -Power: 0.11/0.15 kW -Design: B3 -Shaft diameter: Ø 16 mm -Protection class: IP 54 -Number: 1x geared motor available -Dimensions: 330/130/H190 mm -Weight: 10.1 kg

Gear motor, electric motor, three-phase motor -Speed: 19.5/78 rpm -Power: 0.1/0.4 kW -Construction: B3 -Diameter shaft: 20 mm -Protection class: IP 54 -Dimensions: 410/220/H210 mm -Weight: 21.9 kg

Geared motor, electric motor, electric geared motor -Speed: 45/90 rpm -Power: 0.45/0.6 kW -Design: B3 -Shaft diameter: 25 mm -Protection class: IP 33 Quantity: 1 piece available -Dimensions: 415/200/210 mm -Weight: 20.3 kg

Gear motor, electric motor -Speed: 20.5 rpm -Power: 0.37kw -Type: B5 -Diameter shaft: Ø 30 mm -Protection class: IP 65 -Number: 1x motors available -Price per piece -Dimensions: 500/230/H220 mm -Weight: 31kg

More details upon request

Gear motor, electric motor -Speed: 65 rpm -Power: 0.55 kW -Construction: B5 -Diameter shaft: Ø 25 mm -Brake: 24 V -Protection class: IP 65 -Number: 1x geared motors available -Price: per piece -Weight: 31 kg

cutting and punching machine

Gear motor, electric motor -Speed: 30.5 rpm -Power: 0.55 kW -Brake: 440 V -Construction: B5 -Shaft diameter: Ø 30 mm -Protection class: IP 65 -Number: 1x motors available -Price: per piece -Dimensions: 605/250/H215 mm -Weight: 36 kg

Gear motor, electric motor -Speed: 68 rpm -Power: 0.55 kW -Construction: B5 angle -Diameter shaft: Ø 25 mm -Protection class: IP 54 -Number: 1x motors available -Price: per piece -Dimensions: 400/180/H200 mm -Weight: 21 kg

Berger Lahr Servomotor IFS93/2DP0-DS/3DI-I54/O-001RPP41 4.5Nm 36VDC Imax 5A 14mm shaft. If desired, I can also pull the belt drive from the shaft.

5 AXIS CNC WORKING CENTER BALESTRINI MOD. POWER 200 300 CE - USED - strokes: X-U 4000mm. Y 4000 mm. Z 700 mm. A 1000 ° C 400 ° (+/- 200 °) - n. 2 working tables 1400x3000 mm - n. 3+3 rails per each working table - n. 3+3 CSR supports per each table - head type CS 44 (n. 4 motors 7.5 kW each) - rpm 0/24000 g/min. with inverter - HSKC40/ER32 chuck - n. 2 inverters - wooden waste aspiration/cleaning device - Becker vacuum pump 100 mc - Electrical panel air conditioner - Num Axium control - T-CAS software - remote support - communication PC/CN TCP/IP - cabin + roof - CE rules - year 2010 - COMPLETELY RECONDITIONED

Centrifugal pump, water pump -Motor power: 1.5 kW -Speed: 2850 rpm -Conveying capacity: not visible -Pipe connection inlet: 90 mm -Pipe connection output: 79 mm -Dimensions: 360/240/H370 mm -Weight: 31 kg

5/2 way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block -Manufacturer: Bosch -Type: 0 820 230 001 -Quantity: 1x valve available -Weight: 0.15kg

Key data: 5500

Screw diameter; H3500 - 85 mm / H2000- 65 mm Injectable volume: H3500 - 946 cm3 / H2000- 511 cm3 Injection pressure: H3500 - 1509 bar / H2000-2228 bar Column width: 930 x 930 mm Minimum mould thickness: 300 mm max: 1000 mm Opening stroke: 1100 mm Cores: 4 Robot Interface: Yes Options: Automatic clamping 24 heated zones

EDGE BANDING machine BIMATIC B 220 IR-S second hand machine for edging veneer, PVC, Abs , wood volt. 220 ( 3 phases ) . by applying a 9 kW electric transformer the machine operates at 380 volts. composed by : 1. glue pot 2. edge cutting shear 3. end trimming unit 4. trimming unit / tilting chamfering unit technical details : edge thickness min. / max. mm. 0,4 / 10 panel height mm. 60

Gear motor, electric motor -Speed: 26.5/53 rpm -Power: 0.18/0.3 kW -Construction: B3 -Diameter shaft: Ø 20 mm -Protection class: IP 54 -Number: 1x motors available -Price: per piece -Dimensions: 500/230/H230 mm -Weight: 32 kg

Gear motor, electric motor -Speed: 19.5/78 rpm -Power: 0.37/0.75 kW -Construction: B3 -Brake -Diameter shaft: Ø 20 mm -Protection class: IP 54 -Number: 2x motors available -Price: per piece -Dimensions: 400/210/H200 mm -Weight: 22 kg

Gear motor, electric motor, electric gear motor -Speed: 17 rpm -Power: 0.18 kW -Construction: B3 -Diameter shaft: 20 mm -Protection class: IP 54 -Price: per piece -Number: 2x available -Dimensions: 410/230/H190 mm -Weight: 21.6 kg

Gear motor, electric motor -Speed: 32/65 rpm -Power: 0.2/0.4 kW -Construction: B5 -Diameter shaft: Ø 25 mm -Brake: 24 V -Protection class: IP 65 -Price: per piece -Number: 5x available -Dimensions: 560/250/H220 mm -Weight: 32 kg

Gear motor, electric motor, electric gear motor -Speed: 21.5 rpm -Power: 0.75 kW -Construction: B5 -Diameter shaft: 40 mm -Protection class: IP 65 -Number: 1x motors available -Price: per piece -Dimensions: 600/250/H285 mm -Weight: 49 kg

Gear motor, electric motor, electric gear motor -Speed: 19 rpm -Power: 0.18 kW -Construction: B3 -Diameter shaft: 30 mm -Protection class: IP 54 -Price: per piece -Number: 2x available -Dimensions: 530/250/H220 mm -Weight: 31 kg

Gear motor, electric motor -Speed: 29 rpm -Power: 0.75 kW -Construction: B3 -Diameter shaft: Ø 35 mm -Protection class: IP 65 -Weight: 44 kg

Gear motor, electric motor, electric gear motor -Speed: 142 rpm -Power: 0.55 kW -Construction: B3 -Diameter shaft: 20 mm -Protection class: IP 65 -Dimensions: 440/245/H170 mm -Weight: 21 kg

Bausch + Stroebel KSF 2020 monoblock filler and screw capper, 2 filling heads with a dosing range from 0.1 to 100 ml. with the appropriate pumps, first closing station for droppers/bungs, etc., second closing station for screw caps, size range container diameter 16-55mm, height max. 135 mm, includes format parts for threaded vials GW2.5, GW5, GW10, GW15, GW25 & GW50, output up to 6,000 vials per hour, including infeed and outfeed tables

Gear motor, electric motor -Speed: 14 rpm -Power: 0.11 kW -Construction: B3 -Shaft diameter: Ø 30 mm -Protection class: IP 54 -Number: 1x geared motors available -Price: per piece -Weight: 37 kg

Gear motor, electric motor, electric gear motor -Speed: 325/650 rpm -Power: 0.075/0.15 kW -Construction: B3 -Diameter shaft: 25 mm -Protection class: IP 65 -Price: per piece -Number: 2x available -Dimensions: 410/210/H230 mm -Weight: 25 kg

Gear motor, electric motor, three-phase motor -Speed: 13/80 rpm -Power: 0.063/0.4 kW -Construction: B3 -Shaft diameter: Ø 30 mm -Protection class: IP 65 -Brake -Dimensions: 570/240/H200 mm -Weight piece: 37 kg

Professional pallet wrapper with stretch film height adjustment Turntable diameter 1,600 mm max. load 1,600 kg Film roll width 500 mm Weight approx. 500 kg Supply voltage 400V - 50 Hz - 3 Ph

Basic dimensions: Width: approx. 3,200 mm Height: approx. 938 mm Depth: approx. 600 mm Technical data of the workbench: Manufacturer: Dexion Type: P 90 The scope of delivery includes: 02x Workbench stand, used Material color: green Stand height: 900 mm Stand depth: 600 mm Incl. cross and diagonal struts, foot plates The stands are pre-assembled ( bolted truss ) 04x Workbench traverse, used Material color: orange Truss profile: I: 120 x 50 mm Clear width: 3,000 mm 08x Locking pin, used Finish: sendzimir galvanized To secure the longitudinal members against unintentional lifting 01x Particleboard Second choice, used Chipboard thickness: 38 mm Particleboard width: 3,200 mm Particleboard depth: 600 mm Surface: coated if necessary (possibly in two parts) 01x Particleboard Second choice, used Chipboard thickness: 38 mm Particleboard width: 2,980 mm P ...

Gear motor, electric motor -Speed: 50 rpm -Power: 0.55 kW -Construction: B3 -Diameter shaft: Ø 25 mm -Protection class: IP 65 -Number: 1x motors available -Price: per piece -Dimensions: -Weight: 26 kg

2 x Bock compressor in very good condition. Please refer to the type debt for data

Gear motor, electric motor -Speed: 83 rpm -Power: 0.75 kW -Construction: B3 -Diameter shaft: Ø 25 mm -Protection class: IP 65 -Number: 2x motors available -Price: per piece -Dimensions: 440/240/H210 mm -Weight: 26 kg