b 130 used for sale

cutting diameter: 320 mm saw band length: 3660 x 27 x 0,9 mm cutting width: 420 mm : 320 x 320 mm Capacity 90° rectangular: 420 x 200 mm : 280 mm : 260 x 260 mm Capacity 45° rectangular: 280 x 200 mm cutting speed: 20 - 100 m/min work height max.: 640 mm total power requirement: kW weight of the machine ca.: 1,62 t dimensions of the machine ca.: 1,8 x 0,82 x 1,19 m This bandsaw have been designed to give a low cost compact and rugged machines.Constructed in heavy gauge steel, it offers a strong rigid sawframe, providing a high degree of accurancy when cutting. The machines are fitted with a removable coolant tank incorporating a submerged electric coolant pump which supplies coolant to both guide assemblies. These models can cope with most types of material.Blade guides with rollers and carbide pads provide precise support for the blade. Thermal overload and no-volt release are standar ...

cutting diameter: 350 mm saw band length: 4160 mm cutting width: 400 mm : 350 mm : 350 x 350 mm Capacity 90° rectangular: 400 x 350 mm speed: 20 -100 m/min main drive: 2,2 kW hydraulic pump: 0,37 kW coolant pump: 0,12 kW dimensions of saw-band: 4160 x 34 x 1,1 mm work height max.: 860 mm total power requirement: 2,9 kW weight of the machine ca.: 1030 kg dimensions of the machine ca.: 2,23 x 0,88 x 1,89 m Description: • Fully automatic miter band saw for sawing thick-walled Profiles and solid materials • Motorized roll feed of the material with electrical contact stop • Delta touch screen controls • Miter cutting, up to 45 ° • 1 program with 10 steps • Length accuracy 0.5 mm The feed length of the material is manually adjustable via an Microswitches selected that • Robustly constructed monoblock saw frame with hydraulic vertical movement and linear guide • Rapid advanc ...

cutting diameter: 650 mm saw band length: 8400 mm cutting width: 1000 mm capacity 90 degrees: square: 600 x 600 mm : 1000 x 600 mm capacity 45 degrees: round: 650 mm : 600 x 600 mm : 660 x 600 mm capacity 60 degrees: round: 440 mm capacity 60 degrees: square: 440 x 440 mm : 440 x 600 mm : 650 mm : 600 mm : 840 x 600 mm table height: 880 mm speeds steplessly adjustable: 20 - 100 m/min dimensions of saw-band: 8400 x 54 x 1,6 mm total power requirement: 12 kW weight of the machine ca.: 6,25 t dimensions of the machine ca.: 4,75 x 2,27 x 2,63 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 270 mm saw band length: 3160 x 27 x 0,9 mm cutting width: 350 mm work height max.: 910 mm speed: 35 - 70 m/min : 270 mm Capacity 90° rectangular: 350 x 220 mm : 210 mm Capacity 45° rectangular: 270 x 210 mm : 180 mm capacity 60 degrees: round: 150 R mm capacity 60 degrees: square: 100 R mm total power requirement: 1,5 kW weight of the machine ca.: 465 kg dimensions of the machine ca.: 1750 x 770 x 1460 mm The HU 230 DG is a popular sawing machine and is heavily sold, due to its favourable price-quality relation. With adjustable sawing pressure, coolant pump with reservoir and electrical-mechanical saw blade tension adjustment, this machine is ideal for large workshops and small production lines. separate control panel sawing pressure hydraulically adjustable with cooling system easily moveable with stop gear wheel driven left – right mitre sawing The data for this ...

cutting diameter: 540 mm saw band length: 6000 mm cutting width: 750 mm table height: 695 mm cutting speed: 20 - 100 m/min : 540 mm : 540 x 540 mm Capacity 90° rectangular: 750 x 540 mm : 540 mm : 540 mm : 600 x 540 mm : 510 mm : 450 mm Capacity 45° rectangular: 450 x 540 mm capacity 60 degrees: round: 270 mm capacity 60 degrees: square: 250 mm capacity 60 degrees: flat: 250 x 540 mm total power requirement: 4 kW weight of the machine ca.: 2,45 t dimensions of the machine ca.: 3,0 x 1,3 x 2,13 m Horizontal band saw. The bow is made of heavy steel and the two pillars constitute a strong and rigid saw frame. This ensures high accuracy when cutting. The machines are fitted with an integrated coolant pump that supplies oolant to both guide assemblies. Blade guides with rollers and carbide pads provide precise support for the blade. The machines switch off automatically at the end of the cu ...

cutting diameter: 320 mm saw band length: 3660 x 27 x 0,9 mm cutting width: 350 mm cutting capacity - round: 90° / 320 mm cutting capacity - flat: 90° / 350 x 320 mm cutting capacity - square: 90° /320 mm speed: 20 - 100 m/min : 260 mm capacity 45 degrees: flat: 250 x 180 mm : 180 mm : 160 mm : 150 x 150 mm : 150 mm total power requirement: 1,5 kW weight of the machine ca.: 1,1 t dimensions of the machine ca.: 1900 x 1200 x 1350 m 280G,320G and 320GL are durable and stably laid out for universal separetion from full materials,pipes and profiles.A fast and precise mitre adjustment is characteristic within the range of 90 deg to 30 deg.The sawing property is situated in-line and becomes manuel strained in the angle of 90 deg. The machines are fitted with a removable coolant tank incorporating a submerged electric coolant pump which supplies coolant to both guide assemblies. These models ...

cutting diameter: 440 mm saw band length: 5200 mm cutting width: 695 mm : 440 mm Capacity 90° rectangular: 610 x 440 mm : 4409 x 440 mm capacity 45 degrees: round: 410 mm : 440 x 440 mm Capacity 45° rectangular: 410 x 440 mm : 440 mm : 440 x 440 mm : 500 x 440 mm capacity 60 degrees: round: 320 mm capacity 60 degrees: square: 250 x 250 mm capacity 60 degrees: flat: 250 x 440 mm table height: mm band speed: stufenlos 20-100 m/min total power requirement: 3,62 kW weight of the machine ca.: 1,54 t dimensions of the machine ca.: 2,8 x 1,21 x 1,87 m Horizontal band saw with linear guideways, ideal for mitre cuts between 90° and +30°. Auto height adjustment sensors ensure that the bow can approach the material at high speed. The hydraulic cutting control allows the bow rise up again after a cut has been made. This process is controlled by digital counter on the control panel. The bow angle ...

cutting diameter: 270 mm saw band length: 3160 x 27 x 0,9 mm cutting width: 350 mm cutting capacity - flat: 90° / 350 x 220 mm cutting capacity - round: 90° / 270 mm cutting capacity - square: 90° / 260 x 260 mm cutting capacity - flat: 45°/ R 180x180/ L 240x160 mm cutting capacity - round: 45° / R 210 / L 240 mm cutting capacity - square: 45° / R 180 / L 240 mm cutting capacity - flat: 60° / 150 x 150 mm cutting capacity - round: 60° /160 mm cutting capacity - square: 60° / 150 mm speed: 34 x 68 U/min total power requirement: 1,5 kW weight of the machine ca.: 430 kg dimensions of the machine ca.: 31 m The HU 230 DG is a popular sawing machine and is heavily sold, due to its favourable price-quality relation. With adjustable sawing pressure, coolant pump with reservoir and electrical-mechanical saw blade tension adjustment, this machine is ideal for large workshops and small pro ...

cutting diameter: 320 mm saw band length: 4160 mm cutting width: 610 mm : 320 x 320 mm Capacity 90° rectangular: 450 x 320 mm dimensions of saw-band: 4160 x 34 x 1,1 mm : 320 mm : 320 x 320 mm Capacity 45° rectangular: 280 x 200 mm : 320 mm : 320 mm : 420 x 320 mm speeds steplessly adjustable: 20 - 100 m/min table height: 860 mm total power requirement: 2,69 kW weight of the machine ca.: 1,03 t dimensions of the machine ca.: 2,23 x 1,15 x 2,14 m DG series horizontal bandsawing machines are ideal models for angle cutting of materials with varying number of cuts.It is possible to cut at variable angles between +45° and -60° by giving angle to the upper body of the machine.That machine makes the cutting hydraulically and automatically going up to the height after the cutting.The material is fed manually to the lenght stop and the cut is repeated. Standard Features: Saw Blade 34 Inverter ...

cutting diameter: 330 mm saw band length: 4160 x 34 x 1,1 mm cutting width: 610 mm : 330 mm : 330 mm Capacity 90° rectangular: 610x 310 mm : 320 mm : 320 x 320 mm capacity 45 degrees: flat: 460 x 180 mm speed: 20 - 100 m/min total power requirement: 2,69 kW weight of the machine ca.: 773 t dimensions of the machine ca.: 2,1 x 0,85 x 1,3 m Our semi automatic horizontal bandsaw machine is suitable to cut full materials as pipe, steel cating, steel etc. By turning the vice jaws 0-45 degree cut can be processed. On semi automatic models, after finishing the cut, sawframe is lifted hydraulically up to the adjusted level. After finishing the cut, sawframe is lifted hydraulically up to the adjusted level. Metal sawblade and material roller table are supplied as standart. Standard Features: Blade Brash Coolant Pump Control Panel Hydromechnic Blade Tension Inverter Heavy Duty Gearbox Height Adju ...

cutting diameter: 440 mm saw band length: 5200 x 41 x 1,3 mm cutting width: 640 mm : 440 x 440 mm Capacity 90° rectangular: 640 x 440 mm capacity 45 degrees: round: 440 mm : 400 x 400 mm Capacity 45° rectangular: 400 x 440 mm : 440 mm : 440 x 440 mm : 510 x 440 mm capacity 60 degrees: round: 250 mm capacity 60 degrees: square: 250 x 250 mm capacity 60 degrees: flat: 250 x 440 mm table height: 850 mm cutting speed: 20 - 100 m/min dimensions of saw-blade: 3,1 x 1,2 x 1,91 m total power requirement: 4,67 kW weight of the machine ca.: 1,78 t dimensions of the machine ca.: 2,85 x 1,3 x 1,8 m Product Description Capacity of the machine is 440/640 and projected for fast cuttings straight or with angle . Sensetivity of the machine lets cutting with percentage angles. BMSY 440CDGH has automatic control system and open to future developments. Rollers on the table are designed for easy movement o ...

Head type: BKZ-40 (A 60) ​Marke/ Brand: Bekum Overhauled: Yes/ Yes Layers : 1 Nozzle/ Die: 40 mm Hoses/ Parisons: 1 ​Material/ Material: HD(PE), PP WBK/ WTC: Yes/ Yes View stripe: No/ No

Head type: 5-BKZ-40-110 (A 100) ​Marke/ Brand: Bekum Overhauled: Yes/ Yes Layers : 1 Center-distance: 110 mm Nozzle/ Die: 40 mm Hoses/ Parisons: 5 ​Material/ Material: HD(PE), PP WBK/ WTC: Yes/ Yes View stripe: No/ No

Head type: 2-BKD-51-125 (A 70) ​Marke/ Brand: Bekum Overhauled: Yes/ Yes Layers : 1 Center-distance: 125 mm Nozzle/ Die: 51 mm Hoses/ Parisons: 2 ​Material/ Material: HD(PE), PP WBK/ WTC: Yes/ Yes View stripe: No/ No

Wide belt sander Boere TKKC+BKKC 1100 (bottom/top) Technical specifications: Machine type TKKC+BKKC 1100(bottom/top), in good condition, flow processing machine, with through-going feeder in machine. Motors number 6 works above the item, works beneath the item, Sanding width with infinitely adjustable speed 1100 mm Sanding rails 2 Rotating brush cleaner 2 Sanding rollers 2 Calibration milling heads 2 Sanding belt length mm 1900 Passage height max, mm 250 Hardness grade of roller in ° shore 60 Sensing of workpiece thickness mechanical Feedrate max m/min 25 Total connection kW Weight kg 6800 Machine type TKS / BKS, in good condition, flow processing machine, with through-going feeder in machine, number of motors 6, works above the item, works beneath the item, working width 1100 mm, with infinitely adjustable speed, motor size 4x15 Hp, with 2 rollers, 2 s ...

Semi finished, just missing these price for each boat finished or we trade in the state they are.

cutting diameter: 360 mm saw band length: 4800 mm cutting width: 510 mm : 360 x 360 mm Capacity 90° rectangular: 510 x 360 mm : 360 mm : 360 x 360 mm Capacity 45° rectangular: 390 x 360 mm : 360 mm : 360 x 360 mm : 510 x 360 mm capacity 60 degrees: round: 200 mm capacity 60 degrees: square: 200 x 200 mm capacity 60 degrees: flat: 200 x 360 mm speed: 20 -100 stufenlos m/min main drive: 3,4 kW dimensions of saw-band: 4800 x 34 x 1,1 mm weight of the machine ca.: 1,45 t dimensions of the machine ca.: 2,65 x 1,2 x 1,87 m Machine description : • semi-automatic double miter for cutting profiles and Solid material in steel and non-ferrous material and excellentprice-performance ratio • robust constructed monoblock saw frame • manually swiveling saw frame with hydraulic clamping for optimal Miter (not BMSY 270 DGH ) • miter on mobile control panel digitally readable (no ...

Butcher Boy BM1000 Ribbon blender Stainless, 1000l ribbon blender, forward / reverse, twin discharge doors, safety guarded top, on mobile frame, 3Ph

Standing compressed air boiler make BAUERFabr. -No: 31462K - No. 71B 350 L, built in 1971Boiler capacity: 350 lMax. Pressure: 16 barWith- automatic pressure shutdownused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

: neu : ca. 10 Wochen ab Auftrags : Türkei : 15300 € : 286.11 € : 4160x34x1,1 mm : 20-100 m/min : 320 mm : 320 mm : 610x320 mm : rund 260 mm, quadrat 225 : rund 320 mm, quadrat 320 : rund 320 mm, quadrat 320 : 740 mm : 0.12 kW : 0.37 kW : 2.2 kW : 2100 mm : 1200 mm : 1350 mm : 1150 kg : rund 320 mm, quadrat 320 blade brush control panel height adjustment by switch hydromechanical belt tension inverter material limitation shaft cooling equipment saw blade security switch gearbox adjustable graduation scale for miter cuts 1,2 meter roller conveyor hydraulic lifting of the saw frame user manualin GERMAN or ENGLISH OPTION: hydraulic top clamping € 970,-- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 21500 € : 402.05 € : 4800x34x1,1 mm : 20-100 m/min : 380 mm : 380 mm : 430x380 mm : 590 mm : 0.12 kW : 0.55 kW : 3 kW : 2900 mm : 950 mm : 1660 mm : 1342 kg blade brush control panel hydraulic vice optical adjustment switch hydromechanical blade tension inverter mechanic top clamping material limit shaft coolant pump saw blade security switch gearbox pressure adjustment 1,2 meter roller table user manual in GERMAN or ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 9300 € : 176.7 € : 2730x27x0,9 mm : 35-70 m/min : 230 mm : 230 mm : 240x230 mm : 590 mm : 0.12 kW : 0.37 kW : 1.3 kW : 1700 mm : 800 mm : 1500 mm : 530 kg blade brush control panel height adjustment switch hydromechanical blade tension inverter mechanic top clamping material length stop coolant pump saw blade security switch 1,2 meter roller table users manual in GERMAN or ENGLISCH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 69200 € : 1266.36 € : 9500x54x1,6 mm : 20-100 m/min : 1020 mm : 1020 mm : 1020x1020 mm : rund 675 mm, quadrat 675 : 535 mm : 0.12 kW : 2.2 kW : 7.5 kW : 4500 mm : 1700 mm : 2750 mm : 5860 kg blade brush control panel hydraulic vice hydraulic blade tension inverter linear ways height adjustment by optical sensor automatic adjustment of blade guide arm, syncrounos to vice movement senitive pressure adjustment coolant pump saw blade user manual in GERMAN or ENGLISH OPTION: hydraulic top clamping € 1.940,-- chip conveyer € 1.540,-- turn table for turning the machine for mitre cutting € 5.730,-- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 99500 € : 1820.85 € : 9600x54x1,6 mm : 20-100 m/min : 800 mm : 800 mm : 1300x750 mm : rund 800 mm, quadrat 770 : rund 570 mm, quadrat 570 : rund 800 mm, quadrat 770 : 880 mm : 0.12 kW : 0.37 kW : 7.5 kW : 5050 mm : 2200 mm : 2900 mm : 6700 kg Hydraulischer Spannstock Digitalanzeige für Winkelanzeige Hydraulische Klemmung des Sägearmes Sägearmdrehung von Hand Stufenlos einstellbare Absenkgeschwindigkeit des Sägearmes Automatische Sägerahmenanhebung nach Schnittende Sensitive Schnittdruckregulierung in Abhängigkeit der Materialbeschaffenheit Hydromechanische Bandspannung über Manometer ablesbar Mobiles Bedienpult Schräg verzahntes konisches Schwerlastgetriebe Angetriebene Späne Bürste Bandführung über Hartmetallplatten und Rollen Automatische Bandbruchsicherung Kühlmitteleinrichtung HYDRAULISCHE ANHEBUNG DES SÄGERAHMENS Bet ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 27500 € : 508.75 € : 5000x34x1,1 mm : 20-100 m/min : 360 mm : 360 mm : 640x360 mm : rund 360 mm, quadrat 360 : rund 310 mm, quadrat 270 : rund 360 mm, quadrat 360 : 800 mm : 0.12 kW : 3 kW : 3000 mm : 1200 mm : 1910 mm : 1635 kg hydraulic vice digital readout for scale of bending angle hydraulic clamping of sawing arm turning of sawing arm by hand continuously variable down speed of sawing arm automatic sawing frame lifting after cutting sensitive cutting pressure adjustment subject to material condition hydromechanic tape tension readout by manometer mobile control panel angular geared conical heavy duty gear unit driven chip brush tape guiding by hard metal sheet plates and rolls automatic tape break lock coolant equipment HYDRAULIC UPLIFT OF SAWING FRAME user manual in GERMAN or ENGLISH (sample photo - roller table see photo - optio ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 51200 € : 936.96 € : 6800x41x1,3 mm : 20-100 m/min : 560 mm : 540 mm : 820x540 mm : rund 550 mm, quadrat 540 : rund 360 mm, quadrat 360 : rund 550 mm, quadrat 540 : 880 mm : 0.12 kW : 0.37 kW : 4 kW : 3800 mm : 1750 mm : 2350 mm : 3200 kg hydraulic vice digital readout for scale of bending angle hydraulic clamping of sawing arm turning of sawing arm by hand continuously variable down speed of sawing arm automatic sawing frame lifting after cutting sensitive cutting pressure adjustment subject to material condition hydromechanic tape tension readout by manometer mobile control panel angular geared conical heavy duty gear unit driven chip brush tape guiding by hard metal sheet plates and rolls automatic tape break lock coolant equipment HYDRAULIC UPLIFT OF SAWING FRAME user manual in GERMAN or ENGLISH (roller table see photo - optional a ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 78800 € : 1442.04 € : 8400x54x1,6 mm : 20-100 m/min : 650 mm : 600 mm : 1000x600 mm : rund 650 mm, quadrat 600 : rund 440 mm, quadrat 440 : rund 650 mm, quadrat 600 : 880 mm : 0.12 kW : 0.37 kW : 7.5 kW : 4750 mm : 1970 mm : 2630 mm : 6520 kg hydraulic vice digital readout for scale of bending angle hydraulic clamping of sawing arm turning of sawing arm by hand continuously variable down speed of sawing arm automatic sawing frame lifting after cutting sensitive cutting pressure adjustment subject to material condition hydromechanic tape tension readout by manometer mobile control panel angular geared conical heavy duty gear unit driven chip brush tape guiding by hard metal sheet plates and rolls automatic tape break lock coolant equipment HYDRAULIC UPLIFT OF SAWING FRAME user manual in GERMAN or ENGLISH The data for this ad was create ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 26700 € : 493.95 € : 3660x27x0,9 mm : 20-100 m/min : 320 mm : 320 mm : 350x320 mm : rund 160 mm, quadrat 150 : rund 260 mm, quadrat 180 : rund 300 mm, quadrat 250 : 740 mm : 0.12 kW : 1.1 kW : 2.2 kW : 2100 mm : 2200 mm : 1500 mm : 1660 kg blade brush NC control panel hydraulic vice hydromechanical blade tension inverter coolant pump saw blade security switch gearbox height adjustment user manual in GERMAN or ENGLISH OPTION: hydraulic blade tentioning € 1.100,-- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 44100 € : 815.85 € : 6800x41x1,3 mm : 20-100 m/min : 560 mm : 540 mm : 820x540 mm : rund 550 mm, quadrat 540 : rund 360 mm, quadrat 360 : rund 550 mm, quadrat 540 : 880 mm : 0.12 kW : 4 kW : 3800 mm : 1750 mm : 2350 mm : 3200 kg hydraulic vice digital readout for scale of bending angle hydraulic clamping of sawing arm turning of sawing arm by hand continuously variable down speed of sawing arm automatic sawing frame lifting after cutting sensitive cutting pressure adjustment subject to material condition hydromechanic tape tension readout by manometer mobile control panel angular geared conical heavy duty gear unit driven chip brush tape guiding by hard metal sheet plates and rolls automatic tape break lock coolant equipment HYDRAULIC UPLIFT OF SAWING FRAME user manual in GERMAN or ENGLISH (roller table see photo - optional available,  ...

Conveyor belt binder Brand: Binder A.A length = 9000 mm. Belt width: 2400 mm Drive: 30 kW slip-on gearbox

approx. 560 pieces shelves for shelves / Berger, type Bert, 1m and 1,30m x 0,50m, 150kg, various - used - : Price per shelf: 9.-€ (net)! Minimum order: 50 pieces Manufacturer: Regalwerk / Berger Type: Bert Year of construction: approx. 2019 Depth: 50cm Width: approx. 1.30m = 540 pieces Width 1m = approx. 20 pieces Height: approx. 4cm Payload: 150kg Per pallet approx. 100 - 120 pieces Condition: good Available: as of now Location. Frankenberg / Saxony

- Manufacturer: DRAFT PROCESS - Model: 400L – E – F - Year of manufacture: 2015 - Volume: 400 liters - Maximum temperature: 160 °C - Energy: Electric - P.C: 800 kg - PT: 6.96 bars - PS: 3 Bars

: neu : ca. 6 Monate ab Auftragse : Türkei : 29300 € : 591.86 € : 6000x41x1,3 mm : 20-100 m/min : 560 mm : 560 mm : 570x560 mm : 590 mm : 0.12 kW : 1.1 kW : 4 kW : 500 mm : 1050 mm : 2050 mm : 2242 kg NC control double column band saw 3° cutting angle blade brush control panel hydraulic feeding vice hydraulic vice hydromechanical blade tension inverter linear way optical height adjustment proximity switch for sensing blade slippage material limit shaft pressure adjustment coolant pump saw blade security switch gearbox user manual in GERMAN or ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Box forming machine BORTOLIN-KEMO Year: 2006 Speed: 7.000 bph Model: Formatrice cartoni Gluer Safety protections

Automatic case packer BERCHI 4T – 2 machines Year 1998 1° MODEL TRONIK – M4 2° MODEL TRONIK – M5 Speed: 20.000 BPH 4 heads to work with cartons of 6 and 12 bottles Safety protections

Case packer BORTOLIN Year: 1995 Speed: 14.000 bph Direction: Clockwsie Suitable for double head (12+12 – 6+6) Safety protections.

End bottling line BORTOLIN-KEMO – 6.000 BPH Year: 1997. Speed: 6.000 bph. Box forming machine BORTOLIN-KEMO – 1997: Model: FO.C.23.30. Case packer BORTOLIN-KEMO – 1997: Model: I AM/3T B.I. Hives inserter BORTOLIN-KEMO – 1997: Model: MA/88-1. Box closing machine BORTOLIN-KEMO – 1997: Model: MARA H.M. Safety protections on all machines.

Depalletizer APE mod. DEPAL 2000 - year 2003 Monoblock BERTOLASO 32.32.6.4 with pre-evacuation, composed of: SBR rinser 32 clamps double treatment and mobile nozzles - year 2002 BERTOLASO gravity filler 32 valves with corker 6 heads natural straight corks - year 2002 BERTOLASO Screw capper 4 heads stelvin - year 2006 Capsuling machine NORTAN mod. PRISMA 8+8 - year 2002 Labeller KOSME mixed glue adhesive mod. ETRA FIX 1280 15T.S2.E3 + S3.E3 electronic cam - year 2002 case erectors APE mod. FORM 200 HMA - year 2003 Case packer machines APE mod. INCA 2001 - year 2003 Carton closer APE mod. CH 200HM - year 2003 Palletizer APE mod. PAL 2000 - year 2003 Wrapping pallet TOSA mod. 095 - year 2002 BERTOLASO Caps elevator for natural straight corks mod. ALX1 - year 2002 BERTOLASO Caps Elevator for screw stelvin caps mod. A500 - year 2006 Printer for cartoon print and apply adhesive  ...

bottling line for still wine Speed: 6.000 bph Depalletizer layers SCHABERGER – 1985 Washer-dryer SICK - 1988 Rinser PERRIER – 1975: 25 clamps Single treatment Fixed nozzle. Filler IRUNDIN – 2003: 40 valves Corker BERTOLASO – 1992: 6 heads – natural straight cork. Capsuling machine C.F. – 1992: Plateau capsules distribution. 10 snare heads. Labeller KOSME – 2008 12 heads. Motorized plates. 2 adhesive stations. Predisposition for third adhesive station. Box closing machine SAVOYE – 1980 Handler TWIN-PACK – 2000 Bottle conveyors DIVERS – 1992 Microfiltration filter SARTORIUS – 1994 Batch on bottle printer IMAJE – 2014 Box labeller AVERY – 2014

bottling line isobaric – 2.500 bph Year: 1990 Speed: 2.500 bph Direction: Clockwise Rinser SBR Filler VIRMAURI ISO Corker BERTOLASO – Natural straight cork Corker BERTOLASO – Mushroom cork Caps orientator NERI – Mushroom cap Tappatore BERTOLASO – Crown cap Tappatore BERTOLASO – Screw cap Tappoatore ROBINO&GALANDRINO – Mushroom cap for sparkling wines Capsuling machine ROBINO&GALANDRINO - PVC Capsuling machine ROBINO&GALANDRINO – Champagne Labeller P.E. – cold glue Box forming machine virmauri Case packer Virmauri Box closing machine with tapes Palletizer VIRMAURI

Bottling line – Isobaric Speed: 6.000 bph Rinser AVE 28 clamps Single treatment Fixed nozzle Filler Bertolaso 32 valves De-gassing Self-leveling Pre-evacuation Corker BERTOLASO 4 heads Natural straight cork Capper BERTOLASO 3 heads Screw cap Capsuling machine NORTAN 4 heads for pvc capsules Plateau capsules distributions Ruller BERTOLASO – 8 heads Labeller KOSME – cold glue Box forming machine APE Case packer APE Box closing machine APE Palletizer APE

bottling Line BERTOLASO | Isobaric Year: 2003 Speed: 2.000 bph Direction: Clockwise Depalletizer APE mod. BABYDEPAL Rinser BERTOLASO mod. CALIPSO20/840 20 clamps Filler BERTOLASO mod. EXACTA 16 | Isobaric Corker BERTOLASO mod. S.GLORIA 500R | natural straight cork Washer-dryer CAMES mod. WDT 6 Capsuling machine for polylaminate ROBINO&GALANDRINO mod. ASTRA F4 Labeller CAVAGNINO&GATTI adhesive Inkjet marker VIDEOJET mod. 37 E Case packer monoblock BORTOLIN mod. 3 EST: Box forming machine Hives inserter Case packer Box closing machine Hot glue SIAT mod. HM11-TB Weighs cartons LOGICS&CONTROLS mod. LOGIWEIGHT Basket transport BORTOLINKEMO mod. TRASPORTATORI Unpacking transport mod. TRASPORTATORI Safety protections on all machines

: neu : ca. 4-6 Monate ab Auftrag : Türkei : 11900 € : 242.76 € : 3660x27x0,9 mm : 20-100 m/min : 320 mm : 300 mm : 320x300 mm : 640 mm : 0.12 kW : 0.37 kW : 2,2 kW : 1900 mm : 850 mm : 1300 mm : 770 kg Roller material feed with manual adjustable length stop with limit switch blade brush control panel height adjustment bar with limit switch hydromechanical blade tension inverter hydraulic vice coolant pump saw blade security switch 1,2 meter roller table users manual in GERMAN or ENGLISCH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 59000 € : 1180 € : 6000x41x1,3 mm : 20-100 m/min : 540 mm : 540 mm : 670x540 mm : rund 540 mm, quadrat 540 : rund 510 mm, quadrat 510 : rund 270 mm, quadrat 250 : 805 mm : 0.12 kW : 2.2 kW : 4 kW : 3100 mm : 2350 mm : 2150 mm : 3800 kg NC control double column band saw on linear guidelines 3° cutting angle blade brush control panel hydraulic feeding vice hydraulic vice hydromechanical blade tensioning inverter optical height adjustment proximity switch for sensing blade slippage material limit shaft pressure adjustment coolant pump saw blade security switch user manual in GERMAN or ENGLISH OPTIONS: hydraulic top clamping € 2.230,-- micro coolant equipment € 890,-- laser cutting line € 385,-- ALTERNATIVE: model BMSO 540 CGS NC (with servo instead of hyraulic feed) € 66.800,-- The data for this ad was created with ModulMWS - t ...

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 52200 € : 1044 € : 5400x41x1,3 mm : 20-100 m/min : 440 mm : 440 mm : 610x440 mm : rund 440 mm, quadrat 440 : rund 430 mm, quadrat 430 : rund 320 mm, quadrat 260 : 807,5 mm : 0.12 kW : 1.1 kW : 4 kW : 2850 mm : 2350 mm : 2000 mm : 3600 kg NC control double column band saw on linear guidelines 3° cutting angle blade brush control panel hydraulic feeding vice hydraulic vice hydromechanical blade tensioning inverter optical height adjustment proximity switch for sensing blade slippage material limit shaft pressure adjustment coolant pump saw blade security switch user manual in GERMAN or ENGLISH OPTIONS: hydraulic top clamping € 2.230,-- micro coolant equipment € 890,-- laser cutting line € 385,-- ALTERNATIVE: model BMSO 440 CGS NC (with servo instead of hyraulic feed) € 58.900,-- The data for this ad was created with ModulMWS - ...

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 42800 € : 864.56 € : 5200x34x1,1 mm : 20-100 m/min : 360 mm : 360 mm : 610x360 mm : rund 360 mm, quadrat 360 : rund 360 mm, quadrat 360 : rund 325 mm, quadrat 265 : 735 mm : 0.12 kW : 1.5 kW : 3 kW : 2850 mm : 2250 mm : 1870 mm : 2400 kg NC control double column band saw on linear guidelines 3° cutting angle blade brush control panel hydraulic feeding vice hydraulic vice hydromechanical blade tensioning inverter optical height adjustment proximity switch for sensing blade slippage material limit shaft pressure adjustment coolant pump saw blade security switch user manual in GERMAN or ENGLISH OPTIONS: hydraulic top clamping € 2.120,-- micro coolant equipment € 770,-- laser cutting line € 385,-- ALTERNATIVE: model BMSO 360 CGS NC (with servo instead of hyraulic feed) € 48.300,-- The data for this ad was created with ModulMWS - ...

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 32600 € : 658.52 € : 4380x34x1,1 mm : 20-100 m/min : 325 mm : 325 mm : 400x325 mm : rund 325 mm, quadrat 325 : rund 300 mm, quadrat 265 : rund 190 mm, quadrat 190 : 655 mm : 0.12 kW : 1.1 kW : 2.2 kW : 2130 mm : 2150 mm : 1650 mm : 1860 kg NC control double column band saw on linear guidelines 3° cutting angle blade brush control panel hydraulic feeding vice hydraulic vice hydromechanical blade tensioning inverter optical height adjustment proximity switch for sensing blade slippage material limit shaft pressure adjustment coolant pump saw blade security switch user manual in GERMAN or ENGLISH OPTIONS: hydraulic top clamping € 2.120,-- micro coolant equipment € 770,-- laser cutting line € 385,-- ALTERNATIVE: model BMSO 325 CGS NC (with servo instead of hyraulic feed) € 36.900,-- The data for this ad was created with ModulMWS ...

: neu : ca. 4 Monate ab Auftragse : Türkei : 32600 € : 658.52 € : 6000x41x1,3 mm : 20-100 m/min : 540 mm : 540 mm : 750x540 mm : rund 510 mm, quadrat 450 : rund 270 mm, quadrat 250 : 695 mm : 0.12 kW : 4 kW : 3000 mm : 1300 mm : 2150 mm : 2445 kg hydraulic vice digital readout for scale of bending angle hydraulic clamping of sawing arm turning of sawing arm by hand continuously variable down speed of sawing arm automatic sawing frame lifting after cutting sensitive cutting pressure adjustment subject to material condition hydromechanic tape tension readout by manometer mobile control panel angular geared conical heavy duty gear unit driven chip brush tape guiding by hard metal sheet plates and rolls automatic tape break lock coolant equipment hydraulic uplift of sawing frame 3° inclined saw band user manual in GERMAN or ENGLISH (the vertical hydraulic clamping shown on the photos ...