b 130 used for sale

1 Clamp Perfect Binder, Delivery Belt Year: ca. 1993

Pasteuriser Volume Capabilities :100-500 Litres Control Panel (controls, thermometer controller, ON/OFF agitator) Temperature regulator (Chart recorder on request) Heated by :Heating elements -Hot Water Milk Pasteurisation temperature : 68-75c Max Temperature : 95c Cooling down by connection to chiller or ice bank Heating time : Between 30-1hr depending on capacity . Cooling time: Depending on cooling temperature Complete S/S structure Controls and temperature recording Condition : NEW Delivery : 5 weeks from Order

operating hours read: 31288; equipped with 3 upper and 3 lower sanding units; disconnect 1st flange after trouser piece; The entire must be professionally dismantled by the buyer, and must provide the means of transport himself

Side channel blower, ring blower, vacuum pump -Drive: 0.75 kW -Feed rate: 130 m3 / h -Max. Compression pressure: 195 mbar -Speed: 2800 rpm -Number: 2x pumps available -Price per piece -Dimensions: 320/280 / H420 mm -Weight: 16 kg / piece

hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, -Manufacturer: Bosch, hydraulic unit with hydraulic reservoir and filter -Hydraulic pump: pressure up to 130 bar -Flow rate: 3.8 l/min -Motor: ADDA FC80-4 1.1 kW / 1370 rpm -Hydraulic tank: with level indicator -Individual components: see photos -Dimensions: 400/350/H500 mm -Weight: 26 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speeds: 130 rpm -Power: 0.12 kW -Construction: B5 angle -Diameter shaft: Ø mm -Protection class: IP 54 -Weight: 5 kg

properties Used belt conveyor from the manufacturer Blume Fördertechnik Colour: Blue Incl. drum motor Incl. feet Ideal for fast material transport Expertly dismantled and packaged Condition: fully functional 4 pcs in stock Technical data: Total length: 4.055mm Total width incl. motor: 600mm Total width without motor: 460mm Belt width: 400mm Belt type: Smooth BDL drum motor Engine type: 11s KW0.3 m/s0.30 belt conveyor The belt is ideal in the picking zone for interlocking machines or workstations and to optimize the internal process. During transport, the belt conveyor can transport sensitive and different sized containers, boxes or other packaging and article units to the feed-off or dispensing point and also serves, for example, as a connecting line in front of or between production and machining machines. It also enables efficient parts transport i ...

Transport belt with s/s frame and cloth belt, belt width: 280 mm, total dimensions: 3100 mm x 750 mm x 950 mm.

Transport belt with s/s frame and belt, belt width: 85 mm, total dimensions: 2350 mm x 500 mm x 1250 mm.

Mobile elevating belt, plastic belt, belt width: 370 mm, elevating height: 900 mm, total dimensions: 8300 mm x 800 mm x 1000 mm.

Transport belt, s/s frame, plastic mesh belt, belt width: 300 mm, total dimensions: 2650 mm x 900 mm x 1080 mm.

Transport belt, s/s frame, plastic belt, belt width: 300 mm, total dimensions: (1x) 2800 mm x 550 mm x 980 mm, (1x) 3200 mm x 700 mm x 1000 mm.

Transport belt, s/s frame, plastic belt, belt width: 300 mm, total dimensions: 4250 mm x 650 mm x 900 mm.

Transport belt, s/s frame, plastic belt, belt width: 300 mm, total dimensions: 3000 mm x 700 mm x 900 mm.

Elevating belt, s/s frame, plastic belt, belt width: 400 mm, elevating height: 900 mm, total dimensions: 6300 mm x 550 mm x 1030 mm.

Transport belt, s/s frame, s/s mesh belt, belt width: 150 mm, total dimensions: 2650 mm x 490 mm x 1130 mm.

Castle box tipping for boxes up to 12001200800

properties Used belt conveyor of the Blume Fördertechnik Color: blue Incl. SEW engine Ideal for fast material transport Expertly dismantled and packaged Condition: fully functional Material: Steel Incl. 2 feet specifications: Dimensions of the belt conveyor Type: DA080R0980-2 Connection voltage: 230/240 v/50Hz Engine: Kw 0.37 rpm 1380/70 Total length: 2.120mm Total width incl. motor: 530mm Total width without motor: 440mm Belt width: 400mm Strap Type: Smooth Belt conveyors The webbing is ideal in the picking zone to interlock machines or workstations and to optimize the internal process. During transport, the belt conveyor can convey sensitive and differently sized containers, boxes or other packaging and article units to the feeding or delivery point and also serves, for example, as a connecting section in front of or between production and proces ...

properties Used belt conveyor of the Blume Fördertechnik Color: blue Incl. SEW engine Ideal for fast material transport Expertly dismantled and packaged Condition: fully functional Material: Steel Incl. 4 feet specifications: Dimensions of the belt conveyor Type: DA080R0980-2 Connection voltage: 230/400 v/50Hz Engine: Kw 0.37 rpm 1380/30 Total length: 7.250mm Total width incl. motor: 530mm Total width without motor: 440mm Belt width: 400mm Strap Type: Smooth Head: approx. 800mm, height-adjustable Frame height: 80mm Belt conveyors The webbing is ideal in the picking zone to interlock machines or workstations and to optimize the internal process. During transport, the belt conveyor can convey sensitive and differently sized containers, boxes or other packaging and article units to the feeding or delivery point and also serves, for example, as a con ...

properties Used belt conveyor of the Blume Fördertechnik Color: blue Incl. drum motor Ideal for fast material transport Expertly dismantled and packaged Condition: fully functional Material: Steel Incl. 2 feet specifications: Dimensions of the belt conveyor Type: DAG80R0596-2 Total length: 3.350mm Total width incl. motor: 530mm Total width without motor: 440mm Belt width: 400mm Strap Type: Smooth Head: approx. 800mm, height-adjustable Frame height: 80mm Incl. drum motor 0,3Kw Belt conveyors The webbing is ideal in the picking zone to interlock machines or workstations and to optimize the internal process. During transport, the belt conveyor can convey sensitive and differently sized containers, boxes or other packaging and article units to the feeding or delivery point and also serves, for example, as a connecting section in front of or between pr ...

Transport belt with s/s frame and plastic belt, belt width: 390 mm, total dimensions: 3000 mm x 930 mm x 1250 mm.

Transport belt with s/s frame and plastic belt, belt width: 550 mm, total dimensions: 3250 mm x 900 mm x 1400 mm.

Transport belt with s/s frame and plastic belt, belt width: 500 mm, total dimensions: 2500 mm x 970 mm x 800 mm.

Transport belt with s/s frame and plastic belt, belt width: 180 mm, total dimensions: 1950 mm x 800 mm x 870 mm.

Transport belt with steel frame and cloth belt, belt width: 300 mm, total dimensions: 1870 mm x 600 mm x 1380 mm.

Double transport belt, s/s frame, plastic belt, belt width: (1x) 300 mm, (1x) 400 mm, total dimensions: 3100 mm x 1200 mm x 1900 mm.

Elevating belt, s/s frame, plastic mesh belt with dividers, belt width: 460 mm, divider height: 80 mm, distance between dividers: 300 mm, elevating height: 5000 mm, total dimensions: 3000 mm x 550 mm x 5200 mm.

Mobile elevating belt, s/s frame, plastic belt, belt width: 500 mm, elevating height: 1750 mm, total dimensions: 4500 mm x 600 mm x 1850 mm.

Mobile transport belt, s/s frame, s/s mesh belt, belt width: 600 mm, total dimensions: 2300 mm x 900 mm x 1820 mm.

Mobile transport belt, s/s frame, s/s mesh belt, belt width: 600 mm, total dimensions: 2800 mm x 900 mm x 1820 mm.

Mobile transport belt, s/s frame, s/s mesh belt, belt width: 600 mm, total dimensions: 3500 mm x 900 mm x 1780 mm.

Mobile elevating belt, s/s frame, plastic belt, belt width: 280 mm, elevating height: 1450 mm, total dimensions: 2000 mm x 800 mm x 1700 mm.

capacity 90 degrees: round: 130 mm capacity 90 degrees: square: 130 mm : 130 x 125 dimensions of saw-band: 1440 x 13 x 0,65 mm dimensions: 350 x 690 x 520 m band speed: 30 - 80 m/min total power requirement: 1,2 kW weight of the machine ca.: 19 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: Mounting band saw Powerful and particularly robust metal band saw with die-cast aluminum saw table and stepless cutting speed for Miter cuts up to 60 ° Cutting area at 90 degrees: around 130 mm Cutting area at 90 degrees: square 130 mm Cutting area at 90 degrees: rectangle 130 x 125 Saw band dimensions 1440 x 13 x 0.65 mm Dimensions L x W x H 350 x 690 x 520 m Belt speed 30 - 80 m / min Total power requirement 1.2 kW Machine weight approx. 19 kg Approx. Onsite Dimension. (l x w x h): 350 x 690 x 520 mm, weight approx.: 19 kg

sheet width: 1550 mm plate thickness: 4,5 mm pre-bending: 4,0 mm roll length: 1550 mm min. dia.: 190 mm roll diam. toproll: 130 mm engine output: 2,2 kW bending speed: 5,3 m/min weight: 1360 kg range L-W-H: 2.320 x 900 x 1.200 mm Furnishing: - 2 central rollers driven by an electric motor - Swing-out upper beam - Conical bending device - separate control panel - self-braking main motor - CE mark/Declaration of Conformity Special equipment included in the price: - hardened rollers - Motorized rear roller adjustment - Digital display The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1550 mm plate thickness: 4,5 mm pre-bending: 4,0 mm roll length: 1550 mm min. dia.: 190 mm roll diam. toproll: 130 mm weight: 1265 kg dimensions: 2670x1110x1050 mm Domestic equipments: - Central rollers via electric motor, planetary reduction gear and Gear drive driven - Swivel top roller - Main engine with brake device - Conical bending device - Mobile controller and foot pedal - CE mark / Declaration of Conformity Additional equipment: - induction hardened rolls - motorized rear roller adjustment - Digital display for back roller The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer Battenfeld Model BK-T 1300 / 630 Year 1995 Machine is in good condition 130 Ton

Manufacturer: Busch Schleifbürste Rotationschleifbürste, Type: Robatech 1300, Year: 2014, Control: Siemens, Software: Busch, Monting of the machine: 1 Schleifbürstenband, Number of units: 1, Working widht mm: 130, Through running hight max mm: 0-80, Number of rotations controlled: 30-140 m/min, Units mounted upright: Rotation 360 Grad, Fast exchange device: Bürstenbesätze, Through running hight max mm: 0-80, kW output motor: 5,5 Bürste/, Feeding speed continous adjustable: 4-12, Weight approx. kg: 3500, Required space L x W x H mm: 3840 X2400 X2000, Year :2014

Manufacturer _ BONGIOANNI Model_ 1300 Features_ ARTIGLIO Carriage with 5 hydraulic clamping; Hydraulic Advancing; Chain Loading at 4 ways with hydraulic arms; Unloading Rollers System; Reverse Feeding Chain; Grinder manufactured by Vollmer.

Band saw length range of semi-finished products: 100 – 18,000 mm max. workpiece height: 830 mm cutting range: circle Ø 30 – 800 mm pl. mat. 20 x 20 mm square 1300 x 750 mm cutting at an angle of +60˚ to -45˚ min. cut: 35 mm cutting width: 3 mm max. workpiece weight: 12,000 kg

Boehringer 6000 x 1300 Portal Boring Machine Machine is in good working condition

Manufacturer: MB Busch, Type: Robatech 1300, Year: 2002, Control: Siemens, Monting of the machine: Kettenbürstenschleifsystem, Number of units: 1 Rotierend, Working widht mm: 1300, Through running hight max mm: 150, Diameter of brushes: Einschubbürsten, Fast exchange device: Bürsten, Through running hight max mm: 150, Vacuum belt: yes, Feeding speed continous adjustable: yes, Dust removal brush: yes, Weight approx. kg: ca.2000, Required space L x W x H mm: 3000 X 2000, Workpiece clamping technology: Vakuum, Year :2002

Description: Welding width approx. 1300 mm Vacuum snorkel height adjustment approx. 400 mm Approx. Onsite Dimension. (l x w x h): 1,300 x 100 x 1,900 mm, weight approx.: 170 kg

speed: 35 - 70 m/min cutting diameter: 230 mm saw band length: 2720 x 27 x 0,9 mm cutting width: 130 mm cutting capacity - flat: 90° / 320 x 130 mm cutting capacity - round: 90° / 230 mm cutting capacity - square: 90° / 230 x 230 mm cutting capacity - flat: 45° / R 220x60 /L 230x140 mm cutting capacity - round: 45° / R 180 / L 220 mm cutting capacity - square: 45° / R 150 / L 190 mm cutting capacity - flat: 60° / 120 x 105 mm cutting capacity - round: 60° /120 mm cutting capacity - square: 60° / 105 mm total power requirement: 1,0 - 1,5 kW weight of the machine ca.: 390 kg dimensions of the machine ca.: 1,35 x 0,9 x 1,3 m The HU 230 DG is a popular sawing machine and is heavily sold, due to its favourable price-quality relation. With adjustable sawing pressure, coolant pump with reservoir and electrical-mechanical saw blade tension adjustment, this machine is ideal for large wor ...

cutting diameter: 230 mm saw band length: 2720 x 27 x 0,9 mm cutting width: 130 mm cutting capacity - flat: 90° / 320 x 130 mm cutting capacity - round: 90° / 230 mm cutting capacity - square: 90° / 230 x 230 mm cutting capacity - flat: 45° / R 220x60 /L 230x140 mm cutting capacity - round: 45° / R 180 / L 220 mm cutting capacity - square: 45° / R 150 / L 190 mm cutting capacity - flat: 60° / 120 x 105 mm cutting capacity - round: 60° /120 mm cutting capacity - square: 60° / 105 mm speed: 35 - 70 m/min total power requirement: 1,0 - 1,5 kW weight of the machine ca.: 410 t dimensions of the machine ca.: 1,35 x 0,9 x 1,3 m The BMSY 230 DG is a popular sawing machine and is heavily sold, due to its favourable price-quality relation. With adjustable sawing pressure, coolant pump with reservoir and electrical-mechanical saw blade tension adjustment, this machine is ideal for large wo ...

Single-station machine for containers up to 5 ltr. Extruder 60/24D. ERinfachkopf W. Müller type S1/90. Nozzle up to 90 mm. Prpoprtional control for wagons / shape / calibration. Item removal. Mould dimensions: L 400/450 mm, W 350 mm, D 2 x 130 mm. Mould opening variable. PLC control

Composite plant Fabrikat Linde,with 3 pcs.Bitzer compressor type.4EC 4.2Y 22.7m3/h. 40Kw.at minus 10 degrees evaporation temperature.

Scrap Tyre Baler The BTS-MF450hd and 550hd Special Waste Balers are ideal for compacting difficult materials such as scrap tyres, plastics like car bumpers and plastic canisters, cans, barrels and metal buckets, PET bottles, big bags and much more. The special baling presses impress with their easy operation and large filling volume. Finished bales can be easily removed from the baler with the automatic bale ejector. - Extended cylinders produce a more compact bale with up to 550 kg (material depending) - Suitable for baling scrap tyres, car bumpers, metal and plastic containers, PET-bottles, computer monitors and other heavy duty materials - Extra strong machine body - Retaining Claw system to reduce spring back - Fully automated bale ejector simplifies removal of bale - CE-certified - Quality product Made in Europe Pressing force: 50 Ton Motor: 5.5 kW 16 Amp Power s ...