We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
122,025 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
table diameter: 4520 mm table load: 12000 t swivelling range: 110 Grad total power requirement: 44 kW weight of the machine ca.: / t required space: / m Type: ROMAT 350 / LVEB-120000N-4m / VVEs-D-18000N-5m-S / QVEB-2m travelling beam / CR-200000N / Hydraulic scissor lift table In the scope of delivery: Item Designation 1 Welding power source GLC 603 Quinto SD 2 Wire drum 3 Service door 2.1 4 Robot control cabinet 5 Service door 1.2 6 Scissor lift table (shown in parking position) 7 Cross-travelling unit QVEB 8 ROMAT 350 robot 9 Service door 1.1 10 Safety fence 11 Platform 12 Positioner 13 Sliding door 1 14 Linear traversing unit LVEB 15 Vertical traversing unit VVEs 16 Sliding door 2 ---------------------------------------------------------------------- ---- Technical data - Mechanical dimensions (without control unit and superstructures): approx.6440(57 7 0)x4520(2700)x5460(3320) LxWxH ...
used
Description: Manual available at this LINK Minimum working size 40 x 25 mm Maximum working size 200 x 105 mm Working length 200 - 3500 mm X1 Axis Stroke: 6120 mm X2 Axis Stroke: 6120 mm X3 Axis Stroke: 6200 mm X4 Axis Stroke: 6200 mm CU Axis Stroke: 1620 mm Y1 Axis Stroke: 4000 mm Y2 Axis Stroke: 4000 mm Y3 Axis Stroke: 4000 mm Z1 Axis Stroke: 440 mm Z2 Axis Stroke: 440 mm Z3 Axis Stroke: 620 mm V1 Axis Stroke: 1100 mm V2 Axis Stroke: 1100 mm1 W Axis Stroke: 230 mm A Axis Stroke: 180° C Axis Stroke: 360° SP1 Spindle Power: 14 kW SP2 Spindle Power: 14 kW SP3 Spindle Power: 12 kW Tool changer magazine with 62 positions Max tool diameter 200 mm Tool attachment HSK 63 Blade group power 2.2 kW Blade diameter 200 mm Total power 55 kilowatts SINUMERIK HMI control WARNING! Belts, elastic bands, and photocells of loading and transfer systems require maintenance. ...
used
new CNC Nestingmachine, Brand: INFOTEC Type: 4621 EVO GO Technical data: Working range X axis: 2150 mm working range Y axis: 4600 mm Working range Z axis: 250 mm X / Y axes speed: 60 m/min Z axis speed: 12m/min Drill head grid 32 12 vertical spindles 8 horizontal spindles 1,7 kW System INFOTEC - EVO GO Automation of horizontal drilling in 18 mm panels (patent pending) Lateral drilling zone (requires drilling unit 12/8/2 LL) - Special unit for the C axis, which allows the transfer of the cut workpieces to the drilling zone. Can be rotated 0-90 degrees. (C-axis required) Optional: - Extension of the working area in the Y-axis up to 4600 mm. (Total length of the machine set with unloading table for EVO GO is: 9100mm). - Lateral drilling range: X: 2150 mm, Y:1300 mm Dimensions of side drilling elements: - 1600 x 600 x 18 mm - maximum, - 500 x 80 x 18 m ...
used
x-travel: 400 mm y-travel: 250 mm workpiece height: 485 mm Control: ELESTA CNC 314 total power requirement: 10 kW weight of the machine ca.: 4000 kg dimensions of the machine ca.: m H A U S E R CNC - Controlled Vertical Precision Coordinate Grinding Machine Model S 3 – CNC 314 Year 1987 / 1998 partially reconditioned by Swiss-HTT # 0463 ____________________________________________________________ Table size, approx. 600 x 380 mm Max. load on table, approx. 300 kg Table travel, longitudinal, max. (X Axis) 400 mm Table travel, cross, max. (Y Axis) 250 mm Vertical adjustment of grinding head max. (W Axis) 450 mm Stroke of grinding spindle, max. (Z Axis) 120 mm Table Longitudinal and cross feeds (X/Y-Axis) 0 – 1.500 mm/min Speed of grinding head stroke 15 – 7.500 mm/mi ...
used
max. wheel diameter: 275 mm gear width: 150 mm max. module: 6 min. module: 1,5 total power requirement: 62 kW weight of the machine ca.: 12 t dimensions of the machine ca.: 4,7x4,4x2,45 m max. wheel diameter mm gear width mm max. module 6 min. module 1.5 max. workpiece diameter 275 mm tooth width max. 5.5 mm spiral angle 0 - 60 ° number of teeth 5 - 120 transmission ratio min. 1:1 transmission ratio max. 1:10 milling drive motor 20 kW workpiece drive 14.5 kW total power requirement 62 kVA weight of the machine ca. 12 t dimensions of the machine ca. 4,7 x 4,387 x 2,45 m Tool spindle (D-axis) - workpiece spindle speed (infinitely) 60 to 350 [...] Tool positioning axis (E-axis) - swivel range 0 to 360° - swivel speed max. 19.5°/s Workpiece spindle (B-axis) - mounting diameter outer cone (1: 4) 140 mm - standard internal cone (1:20) 99.218 mm - workpiece spindle speed max. 300 [...] - wo ...
used
max. wheel diameter: 275 mm gear width: 150 mm max. module: 6 min. module: 1.5 max. workpiece diameter: 275 mm tooth width: max. 5.5 mm spiral angle: 0 - 60 ° number of teeth: 5 - 120 transmission ratio min.: 1:1 transmission ratio max.: 1:10 milling drive motor: 20 kW workpiece drive: 14.5 kW total power requirement: 62 kVA weight of the machine ca.: 12 t dimensions of the machine ca.: 4,7 x 4,387 x 2,45 m Tool spindle (D-axis) - workpiece spindle speed (infinitely) 60 to 350 r.p.m. Tool positioning axis (E-axis) - swivel range 0 to 360° - swivel speed max. 19.5°/s Workpiece spindle (B-axis) - mounting diameter outer cone (1: 4) 140 mm - standard internal cone (1:20) 99.218 mm - workpiece spindle speed max. 300 r.p.m. - workpiece spindle passage 90 mm Workpiece positioning axis (Y-axis) - travel 870 mm - speed max. 4.5 m/min Roller rotation axis (A-axis) - swivel range 315° - swivel ...
used
ABB IRB 2400 M2000 robotic machining cell manufactured in 2004 in Switzerland, is equipped with an ABB IRB 2400/16 6-axis industrial robot and an ABB IRC5 controller for the control of the manipulator and peripherals. The machining station has so far been configured and used for milling of allowances after thermoforming workpieces. The high-performance milling robot has an arm with a maximum reach of 1550 mm, capable of handling workpieces weighing up to 16 kg. The industrial robot achieves the best cycle performance thanks to modern technology that automatically optimises parameters and executes the programmed path regardless of speed or operating mode, even after an emergency stop or power failure. The BaseWare OS operating system is used to fully control every aspect of the machine, ensuring the highest machining accuracy is achieved. The robotic milling station is offered with ...
used
KAWASAKI 3RS050N-BC02 palletizing robot built in 2018, is designed to increase the productivity of production lines in many industries by automating the process of palletising products. This 6-axis packaging robot features a compact design with a sturdy arm and a long reach, guaranteeing fast handling of goods weighing a maximum of 50 kg. The total weight of the machine is 555 kg. Technical specifications of the KAWASAKI 3RS050N-BC02 industrial robot - number of axes: 6 - arm reach: 2100 mm - maximum payload: 50 kg - axis movement range JT1 axis: ± 180° JT2 axis: + 140° / -105° JT3 axis: + 135° / -155° JT4 axis: ± 360° JT5 axis: ± 145° JT6 axis: ± 360° - axis motion speed JT1 axis: 180°/s JT2 axis: 180°/s JT3 axis: 185°/s JT4 axis: 260°/s JT5 axis: 260°/s JT6 axis: 360°/s - repeatability: ± 0.06 mm - mounting: floor, ceiling - power requirement: ...
used
Double end tenoner for massiv wood panels Brand: Wehrmann Type: Combima Year: 2007 Wehrmann designed: sturdy, high quality and NC controlled - The IMA Combima machine chassis makes our machine very sturdy - This machine is modular equipped with the below listed units - Heesemann as a High-Quality brand supplied us with their sanding technology - NC controlled with grinding units 1 motorized width adjustment max. working width: approx. 2,500 mm min. working width: approx. 280 mm low-maintenance precision roller transport chains, with 80 mm wide and 85 mm long chain plates, driver cams, distance 1,080 mm, pneumatic cam control at 3 heights (6, 12, 18 mm) 2 top prints, electromechanically height-adjustable, each with a double composite V-belt 80 wide, left and right; Motorized height adjustment via axle working height approx. 950 mm electronic frequency contro ...
used
CNC working center Brand: Comec Type: Variax J new machine The highest level of progress for your door frame production: 6 controlled axes and a fast production process characterize the Variax J. Movable machining support - All axes move on ball bearing mounted BOSCH-REXROTH or comparable linear guides - Movement / positioning of the machining units max. 70 m/min. - Axis X = 2950 mm - Axis Y = 400 mm - Axis Z = 500 mm - Axis support for vertical rotation of the machining head. axis B from -135° to +135°, motor kW 0.45. - Axis support for horizontal rotation of the machining head. Axis C from -180° to +180°, motor kW 0.45. Machining head - electrospindle 1-2 - N°1+1 electrospindle fixed to the H support - N°1 electrospindle for milling, - with 2 spindle outputs, kW 7.0 / 12-18.000 rpm, adjustable by means of frequency converter Tool attachment wit ...
used
Important and distinguishing design features of the RaptorX SL steel base machine RaptorX-SL3200/S15 The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method to produce large 3D objec ...
used
Important and distinguishing design features of the RaptorX SL steel base machine RaptorX-SL2200/S20 The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method to produce ...
used
Important and distinguishing design features of the RaptorX SL CNC Router steel base machine RaptorX-SL2200/S15 The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction metho ...
used
Important and distinguishing design features of the RaptorX SL steel base machine The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method to produce large 3D objects. ...
used
The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method to produce large 3D objects. Considering our new concept of working with an "invisible" motor for the X-axis an ...
used
The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). 3D engraving, bas reliefs in marble etc. Create and mill, what ever you want . The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method to produce large 3D objects. Considering our ...
used
Machine type Machining center universal BAZ Manufacturer Heller Model MCS-H / U 300 Year of construction 2002 Condition good (used) Specifications Bright MCS-H/U 300 Year of construction: 2002 Control: Siemens 840 D Workspace: Longitudinal stroke X-axis 1000 mm Vertical stroke Y-axis 800 mm Transverse stroke Z-axis 1100 mm Lifting position longitudinally to the center of the table MCS-H X-axis +500 to -500 mm Lifting position vertically over. Palettes. MCS-H Y-axis +120 to +920 mm Lifting position transverse to the center of the table MCS-H Z-axis +200 to +1300 mm Guidance system: Linear compact roller guide version Size 55 Transfer elements: Accuracy Ball Screws Diameter x Slope Diameter 50 x 20 mm Feed drive system: Three-phase servo motors Closed design Feed forces: X-axis at ED S3-40% 15000 N Y-axis at ED S3-40% 15000 N Z-axis at ED S3-40% 20000 N Positio ...
used
GeneralHorizontal 5-axis universal machining centre; Control: CELOS with Siemens 840D sl Operate Technical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minWorking area 1Longitudinal850 mmCross900 mmVertical1150 mmCabineFull protection cabinMotor spindle 20,000 rpmMotor spindle speedMASTER® HSK-A 63 Spindle speed 20 - 20,000 min-1 Output 35 kW / 25 kW (47 hp / 33 hp) Torque 130 Nm / 86 Nm (96 ft lbs / 63 ft lbs) (40 / 100 % duty cycle)Taper cleaning brushesTaper cleaning unit with rotating brushes for spindle taper HSKNC swivel rotary table DirectDrive CNC swivel rotary table direct drive C-axis with pallet carrier Permissible load: 800 kg / 1,760 lbs C-axis: 80 min-1 direct drive A-axis: 15 min-1 single drive Rotation C axis: endlessly turning Swivel range A axis: +120°/-120° (replacement of base machKi ...
used
Powered by a reliable FRONIUS TransPuls Synergic 4000 power source, the robotic welding station enables efficient MIG/MAG welding in all positions and ensures low operating costs. The industrial robot located in the welding cell, thanks to its high repeatability of positioning and stability, is able to guarantee the highest quality and precision of welding. A robust body with a 1500 mm reach arm, combined with six high-speed axes, contributes to a significant reduction in production cycles. The welding cell consists of: industrial robot: REIS RV 10-6 RSV, FRONIUS TransPuls Synergic 4000 welding source with a capacity of 400 A (50%), 365 A (60%), 320 A (100%), SRM 100 rotary table with a lifting capacity of 100 kg and dimensions of 1200 x 750 mm each, cooler, control cabinet, user manual in Polish and German. Technical Specifications: number of axles: 6 arm reach: 1500 mm maximum lo ...
new
YASKAWA MOTOMAN GP35L industrial robot was built in Japan in 2021. This compact machine with an extremely robust body and extended reach is ideal for a wide range of applications i.e. load handling, machine operation and grinding/polishing. Thanks to its compact size and weight, it can be installed in hard-to-reach areas in a small amount of space, reducing at the same time interference with peripheral equipment. The YASKAWA robot is additionally equipped with a MOTOMAN YRC1000 controller with the ability to use extended commands and create advanced motion functions. The offered GP35L robot is brand new and has never been used. The total weight of the machine is 600 kg. Technical specifications of the YASKAWA MOTOMAN GP35L robot - number of axes: 6 - arm reach: 2538 mm - maximum payload: 35 kg - axis motion range S axis: ± 180° L axis: +135°/-90° U axis: +206°/-80° R axi ...
used
SAACKE UW I D CNC universal grinding machine was manufactured in Germany in 2020. The extremely powerful machine is designed for the fully automatic wet grinding of a wide range of tools, such as knives, cutters or drills. Machining is performed in a single work cycle, which significantly increases production efficiency, saves time and reduces costs. The SAACKE CNC tool grinding machine allows the use of a chain or pallet system for automatic tool feeding and machining of workpieces within it with a maximum diameter of 250 mm and a length of 480 mm. Precision tool grinding is performed in five numerically controlled axes (X,Y,Z,A,B) using grinding wheels housed in a 6-position magazine separated from the workspace with an automatic grinding wheel changing system. In order to guarantee high travel speeds and positioning accuracy, the X,Y and Z axes of the UWID CNC tool grinder are m ...
new
6000W Raycus The machine is fully equipped: - CYPCUT - high-end CNC with German surface - Raycus - laser source - Raytool cutting head - Interchangeable table - 1 CCD camera, 1 for indoor use -Stabilizer - Air conditioning for control cabinet - High-performance radiator - Anti-collision protection - 24 months warranty Working area (mm) 3000 x 1500; 6000 x 2000; 4000 x 2000 Max. working height (mm) 100 Effective travel X axis (mm) 3050; 6050; 4050 Y axis (mm) 1550; 2050; 2050 Z axis (mm) 100 Position accuracy X axis (mm/m) ±0.03 Y axis (mm/m) ±0.03 Z axis (mm/m) ±0.01 Repeatability X axis (mm) ±0.01 Y axis (mm) ±0.01 Z axis (mm) ±0.005 Positioning speed X axis (m/min) 120 Y axis (m/min) 120 Z axis (m/min) 30 Acceleration: X-axis: 1.5G , Y-axis: 1.5G Working table load 2000 kg Table change in sec. 20 Max Cutting Height ...
new
- CYPCUT - high-end CNC with German surface - IPG - laser source - Precitec Lightcutter - cutting head - Interchangeable table - 2 CCD cameras, 2 for indoor use, 1 x for control shuttle table - 2 years warranty -Stabilizer - Air conditioning for control cabinet - High-performance radiator - Anti-collision protection - Fast Cutting Mode 24 months warranty Working area (mm) 4000 x 2000 Max. working height (mm) 100 Effective travel X axis (mm) 4050 Y axis (mm) 2050 Z axis (mm) 100 Position accuracy X axis (mm/m) ±0.03 Y axis (mm/m) ±0.03 Z axis (mm/m) ±0.01 Repeatability X axis (mm) ±0.01 Y axis (mm) ±0.01 Z axis (mm) ±0.005 Positioning speed X axis (m/min) 120 Y axis (m/min) 120 Z axis (m/min) 30 Acceleration: X-axis: 1.5G , Y-axis: 1.5G Working table load 2000 kg Table change in sec. 20 Max Cutting Heights – IPG Laser 4000 W 20 mm / steel - 16 mm / ...
used
x-travel: 3000 mm y-travel: 4000 mm z-travel: 1500 mm Control: Heidenhain TNC 430 M total power requirement: 120 kVA weight of the machine ca.: t dimensions of the machine ca.: m 3/5 axes CNC portal milling machine with integrated C-axis and changeable milling heads. The machine had a purchase price of € 1.4 million in 2002. An inspection in the sellers plant under power is possible after previous appointment. Condition: The machine was overhauled in 2018, costs of over € 100.000,-. - Drives of the X-axis renewed - New hydraulic power unit - Complete electrical wiring renewed - Spindle cooling unit new - 2 pieces longitudinal conveyors new - Coolant pump new - Cover complete X-axis new - Bellows Y-axis new - Exchange measuring ruler X-axis - Fork head spindle bearing new Belleville spring assembly new Drive motor A-axis new Spindle cone ground - Overhaul milling gear (2020) Working r ...
used
Description: Well-maintained PAMA Speedmat HP3 Machining Centre with Pallet and Head Changer. Control SIEMENS Sinumerik 840 D sl Working area Workpiece dimensions (Ø x h) max.: 3,000 mm x 3,200 mm , Load capacity of pallet table max.: 8,000 kg Table dimensions: 1,250 x 1250 mm Work spindle diameter: 130 mm Number of interchangeable pallets: 2 Axis travel Axis travel X-axis: 3,000 mm Axis travel Y-axis: 2,000 mm Axis travel Z-axis: 3,200 mm + W-axis max.: 800 mm Table rotation B-axis: 360 Axis speed and Power transmission Table speed (B axis) max.: 7 upm Table torque max.: 48  , Feed rate X, Y, Z axis: 0.5 - 10,000 mm/min Feed force X, Y, Z axis max.: 20,000 N Rapid traverse X, Y, Z axis: 30 m/min Spindle drive speed max.: 6,500 rpm , (the actual speed at the tool varies depending on the machining head) Angle head TS 20 Tool changer Tool ...
used
Important and distinguishing design features of the RaptorX SL steel base gantry machine RaptorX-SL1200/S15 The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method to produce large ...
used
Important and distinguishing design features of the RaptorX SL steel base machine / gantry RaptorX-SL1200/S20 The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method t ...
used
Important and distinguishing design features of the RaptorX SL steel base machine The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method to produce large 3D objects. ...
General- Compound slides with turning/milling spindle as integrated spindle motor, with hydr. locking at turning acceptance HSK-63A DIN 69893 - Y-axis ± 100 mm - B-axis ±110° with pneumatic locking - Tools magazin disc with 1x24 positions - Absolute direct gauging system in the X, Y, Z linear axes - Coolant pump 5 bar; 20l/min - Cooling system for spindle motor, turning/milling spindle, B-axis torque motor - USB interface, Ethernet interface; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways500 mmTurning diameter500 mmMax. Turning Length750 mmBar diameter max.65 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)25 kWDrive power (40% DC)32 kWSpeed range- 5000 rpmTorque (100% DC)280 NmMax. torque (40% DC)360 NmC-Axis Speed-5000 rp ...
used
ABB IRB 140 M2004 robot (year 2005) Available: (2) complete arms + (2) units of IRC5 module transformer This unique little robot is a compact and powerful 6-axis machine with a unique combination of fast acceleration, large working area and high payload. It is the perfect choice for tasks that require short cycle times and precision, such as part assembly and light part loading and unloading. General data Robot maximum load: 5 Kg Number of axes: 6 Max reach: 810mm Repeatability: 0.03mm Controller: IRC5 M2004 robot camera speed Axis 1: 200º / s Axis 2: 200º/s Axis 3: 260º/s Axis 4: 360º/s Axis 5: 360º/s Axis 6: 450º/s Robot movement range • Axis 1: ± 360 ° • Axis 2 ± 200 ° • Axis 3 ± 280 ° • Axis 4 ± 400 ° • Axis 5 ± 240 ° • Axis 6 ± 800 ° Applications: Loading and unloading of parts, handling, measurement.
used
x-travel: 3500 mm y-travel: 1083 mm z-travel: 1074 mm control: HEIDENHAIN iTNC 530 HSCI clamping table: - surface area: 4.000 x 1.000 mm Thread bore with fitting: - Feeds: - X-, Y- and Z-axis, stepless: 2 - 30.000 mm/min rapid travel x/y/z: 30 m/min Max. feed force of axis: 10.000 N 2-axis Milling Head: - 2-axis milling head TUB-E92 with power on: - Torque-Motors for 5-axis-simultaneos processing: - capacity at 100% load: 29 kW Speed stepless: 2- 30.000 max. torque: 92 Nm Max. torque: 60 min-1 tool taper: HSK 62A-DIN 69893 automatic tool changer ATC: - Tool places: 30 diameter of tools max.: 90 mm workpiece length: 320 mm weight of tools max.: 8 kg changing positions: vertikal electrical supply data: - capacity: 120 A voltage: 400 V operating frequency: 50 Hz total power requirement: 29 kW weight of the machine ca.: 28 t dimensions of the machine ca.: 8,3 x 6,7 x 3,6 m Guides, drive and ...
used
SAMAG MFZ 2-2 CNC milling machine was built in 2005 in Germany. This specially designed machine for the automatic machining of workpieces made of metallic materials has been equipped with two high-performance spindles and two work tables with a rotary axis, allowing for simultaneous machining of a part and loading/unloading of another. This solution maximises production efficiency and shortens production times, making the machine significantly distinguishable from other milling machines on the market. The machining, characterised by high quality and precision, is performed in automatic mode or in the setting up mode, using rotary tools taken from a capacious magazine. During its service life, the SAMAG twin-spindle milling machine has worked around 40000 hours and has been continuously serviced. The total weight of the machine is approximately 22 tonnes. Technical specifications of ...
used
x-travel: 3500 mm y-travel: 1083 mm z-travel: 1074 mm control: HEIDENHAIN iTNC 530 HSCI clamping table: - surface area: 4.000 x 1.000 mm Thread bore with fitting: - Feeds: - X-, Y- and Z-axis, stepless: 2 - 30.000 mm/min rapid travel x/y/z: 30 m/min Max. feed force of axis: 10.000 N 2-axis Milling Head: - 2-axis milling head TUB-E92 with power on: - Torque-Motors for 5-axis-simultaneos processing: - capacity at 100% load: 29 kW Speed stepless: 2- 30.000 max. torque: 92 Nm Max. torque: 60 min-1 tool taper: HSK 62A-DIN 69893 automatic tool changer ATC: - Tool places: 30 diameter of tools max.: 90 mm workpiece length: 320 mm weight of tools max.: 8 kg changing positions: vertikal electrical supply data: - capacity: 120 A voltage: 400 V operating frequency: 50 Hz total power requirement: 29 kW weight of the machine ca.: 28 t dimensions of the machine ca.: 8,3 x 6,7 x 3,6 m Guides, drive and ...
used
CNC milling and turning center Year of construction 2005 FANUC 18i-TB Number of controlled axes: 9 Maximum rotating diameter on the bench 600 mm Recommended turning diameter 250 mm Maximum turning diameter 550 mm Maximum turning length 1020 mm Bar passage diameter 76 mm Racing X axis travel 555 mm X2 axis travel 185 mm Z axis travel 1 mm 1.095 Z2 axis travel mm 1.140 Y axis travel 160 mm (+ -80) Axis stroke A 1.065 mm C1 axis; C2 360 ° Axis B 240 ° (+ -120) Axis B coupling 15 ° rapid X1-2 24 ° Z 1 - Z 2 24 ° Y axis m / min 16 Axis A m / min 24 C1 axis; C2 200 rpm Axis B 27 rpm Spindle 3500 rpm spindle speed Spindle Attack A # 2 Spindle motor power 26/22 Kw Spindle diameter 130 mm Chuck 250 mm Cutter head Spindle cone CAPTO C6 Spindle diameter front 70 mm Indexing: 360 ° Number of tools 40 Motor power 15/11 Kw Electro-spindle speed: 10,000 r ...
used
Maximum loadable weight (capacity between the tips) t 80 Machine weight t 160 Nominal turning diameter mm Ø 1,800 Maximum turning diameter mm Ø 1,900 Maximum diameter of passage on the bench mm Ø 2,600 Max turning length (distance between centers) mm 11,925 (12,025) Spindle axis height 1,300 mm Plateau diameter mm Ø 1,900 Plateau grip range mm Ø 300 ÷ Ø 1,350 Grip range 1 mm Ø 300 ÷ Ø 550 Grip range 2 mm Ø 500 ÷ Ø 950 Grip range 3 mm Ø 900 ÷ Ø 1,350 Clamping force (with max tightening torque 250 Nm) kN 200 Spindle motor power kW 160 Total installed power kW 310 Maximum spindle torque kNm 155 Spindle rotation speed range rpm 1 ÷ 150 Spindle rotation speed in 1st rpm range 1 ÷ 24 Spindle rotation speed in 2nd rpm range 20 ÷ 60 Spindle rotation speed in 3rd rpm range 50 ÷ 150 Carriage forward speed in transverse direction (X ...
used
x-travel: 11200 mm y-travel: 3130 mm z-travel: 1000 mm Control: NUM 1060 W A-axis: +- 120 ° c-axis: +215/-210 ° spindle motor: 15 kW spindle taper: HSK-F63 turning speeds: 24000 U/min table width: 1500 mm table length: 9400 oder 2x3000 mm total power requirement: kW weight of the machine ca.: 20 t dimensions of the machine ca.: 14,6x5,0x4,225 m Use: e.g. for processing aluminum panels, drilling profiles, advertising (signs milling, etc.), mold construction (prototypes) and processing of light steel frames / -beams using HSC milling The vertically arranged high-frequency milling spindle for automatic Tool change is mounted in a fork head on the Z-axis plate. The Spindle can be moved with the fork head in 2 NC axes, in the A axis and the C-axis. The vertical movement is carried out via the Z-axis. Liquid cooling via a cooling unit. Tool magazine: moving plate changer in the potal, outsid ...
used
turning diameter: max. 42 mm turning length: ca. 120 mm control: 160i-TB Fanuc Main spindle:: max. usable bar diameter: 42 mm Max. speed main spindle: 6.500 min/-1 power capacity - main spindel: 7,5 / 5,5 kW C-Axis: 0,001 ° Subspindle:: max. usable bar diameter: 42 mm Max. Speed Subspindle: 6.500 min/-1 power capacity - Sub spindle: 7,5 / 5,5 kW C-Axis: 0,001 ° slide I:: x-axis: 65 mm y-axis: 350 mm z-axis: 120 mm rapid traverse: 30 m/min Accelaration: 5/10 m/s² feed power: max. 350 daN Tool Slide I:: number of toolpositions: 10 (6+4) pos. Number of fixed tools: 6 pos. Number of driven toolspositions: 4 pos. collets: ESX 20 slide II:: x-axis: 265 mm z-axis: 320 mm rapid traverse: X: 18 / Z: 30 m/min Accelaration: 5 m/s² feed power: max. 350 daN Slide Y2:: y-axis: 326 mm rapid traverse: 30 m/min Accelaration: 5 m/s² feed power: max. 350 daN Tool Slide II:: number of toolpositi ...
used
VISION WIDE VB-2016 5-AXIS CNC gantry milling machine was manufactured in 2013 in Taiwan. The machine performs precision machining of heavy workpieces in three or even five axes, once the automatic swivel head is mounted to the vertical spindle. The machine’s top-quality cast-iron structure is rigid and resistant to bending stress, thus perfectly dampening the vibrations and oscillations generated during machining. The VISION WIDE VTEC VB 2016 CNC gantry milling machine centre is equipped with safety guards fitted around the entire machine with sliding doors that open flush with the X-axis travel. Inside, there is a large work table with a length of 2000 mm and a width of 1300 mm, which is supported along the entire length of the longitudinal travel and guided by two sliding guideways, making it possible to machine heavy workpieces even when the table is unevenly loaded. Two scre ...
used
FANUC S-420iW industrial robot was manufactured in Japan in 1996. A handling robot characterised by maximum performance and reliability has many applications in the industrial sector. The arm with a long reach of 2850 mm and a load capacity of 155 kg, together with 6 axes equipped with mechanical brakes, will meet even the most demanding challenges. The S-420i W robot has an integrated FANUC R-J2 controller, which uses advanced technology to improve and optimise overall productivity. The total weight of the machine is 1600 kg. Technical specifications of the FANUC S-420iW articulated robot - integrated controller: FANUC R-J2 - number of axes: 6 - arm reach: 2850 mm - payload: 155 kg - portable teach pendant: FANUC - motion range of robot axes J1 axis: 360° J2 axis: 142° J3 axis: 135° J4 axis: 600° J5 axis: 260° J6 axis: 720° - movement speed of robot axes J1 axis: ...
used
x-travel: 400 mm y-travel: 250 mm workpiece height: mm Control: CNC 314 ELESTA total power requirement: 15 kW weight of the machine ca.: 5500 kg dimensions of the machine ca.: m H A U S E R (Switzerland) CNC - Controlled High Precision Jig Grinding Machine Model S 3 – CNC 314 Year approx.. 1990 S/N 32086 ____________________________________________________________ Table size, approx. 600 x 380 mm Max. load on table, approx. 300 kg Table travel, longitudinal, max. (X Axis) 400 mm Table travel, cross, max. (Y Axis) 250 mm Vertical adjustment of grinding head max. (W Axis) 450 mm Stroke of grinding spindle, max. (Z Axis) 120 mm Table Longitudinal and cross feeds (X/Y-Axis) 0 – 1.500 mm/min Speed of grinding head stroke 15 – 12.000 mm/min Vertical distanc ...
used
Nakamura Tome Super-Mill WY-250L CNC Multi-Axis Turning/Milling Center Age : 2012 FEATURES: FANUC 31I-A CNC CONTROL DUAL OPPOSED SPINDLES WITH C-AXIS UPPER & LOWER TURRETS WITH Y-AXIS LIVE MILLING ON BOTH TURRETS CHIP BLASTER LNS QL SERVO S3 BAR LOADER CHIP CONVEYOR SPECIFICATIONS: DISTANCE BETWEEN SPINDLES 47.24" MAXIMUM TURNING DIAMETER 8.9" MAXIMUM TURNING LENGTH 35.8" X-AXIS TRAVEL, X1/X2 6.3" / 6.5 Z-AXIS TRAVEL, Z1/Z2 35.8" BAR CAPACITY 1” MAIN SPINDLE: MAIN SPINDLE SPEED 3500RPM MAIN SPINDLE MOTOR 25 HP MAIN SPINDLE BORE 2.6" MAIN SPINDLE NOSE A2-8 C-AXIS ROTATION 0.001 DEGREE SUB-SPINDLE: SUB SPINDLE SPEED 4500RPM SUB SPINDLE BORE 2" SUB SPINDLE MOTOR 20 HP SUB-SPINDLE NOSE A2-6 C-AXIS ROTATION 0.001 DEGREE B-AXIS TRAVEL 37.2" UPPER & LOWER TURRETS: DRIVEN TOOL SPEEDS 6000RPM DRIVEN TOOL MOTOR 7.5 HP Y-AXIS MOVEMENT 4"/2" EQUIPPED WITH: FA ...
used
Code: 0785 Brand: BUSELLATO Model: JET 6000 XL - CE Standard CNC Boring Milling Centre with 4 controlled axis for drilling, milling, contouring, cutting work on wooden elements, panels, Mdf, veneers, composite materials - CE Standard Machine structure composed of an electro-welded, standardised steel grid Technical data Working range mm 4600 x 1700 Useful passage mm 200 Useful X-axis stroke mm 5400 Useful Y-axis stroke mm 1833 Useful Z-axis stroke mm 400 X-axis speed 115 mt/min Y-axis speed 100 mt/min Z axis speed 30 mt/min N° 4 working ranges in X-axis with double "0" rows 8-position tool changer Composition: Boring head: X-axis vertical spindles 14 Y-axis vertical spindles 12 X-axis horizontal spindles 4 Y-axis horizontal spindles 8 Motor KW 2,2 - Rpm 3000/3500 Electrospindle Hp 9,5 - Rpm 24000 - ISO 30 coupling 1° Indexed circular saw unit X-Y - Ma ...
used
Manufacturer MORI SEIKI Model NLX2500SY/700 Month / Year 12/2011 CNC MORI SEIKI M730 BM Capacities Swing over bed 590 mm. Swing over cross slide 360 mm. Max cutting diameter 460 mm. Max cutting length 795 mm. Bar work capacity 80 mm. Y axis INCLUDED Travels and feeds X axis travel 260 mm. Y Axis travel ±50 mm. Z axis travel 795 mm. Spindle 2 B axis travel 734 mm. Rapid traverse rate X, Z, B axis 30.0000 mm/min Rapid traverse rate Y axis 10.0000 mm/min Jog feedrate X, Z, B, Y axis 0-5.000 mm/min Spindle C axis in spindle INCLUDED C axis index in spindle 0.001º Spindle speed 4.000 rpm Spindle speed ranges 2 Spindle nose JIS A2-8 Through-spindle hole diameter 91 mm. Spindle drive motor 18.5 kW Spindle 2 C axis in spindle 2 INCLUDED C axis index in spindle 2 0.001º Spindle 2 speed 6.000 rpm Spindle 2 speed ranges 1 Spindle 2 nose JIS A2-5 Through-spind ...
used
GeneralTurning-milling centre - partial hollow clamping device - drawtube ID 68 mm - C-axis and spindle brake (hydraulically) - upper compound slide with turning-/ milling spindle, reception HSK-A63, DIN 69893 with 3-fold Hirth-coupling 1°-Indexing to lock the spindle during turning operations - Y-axis - B-axis interpolating with hydraulically locking - tool magazine 1 x 60-fold, shelf magazine with tool changer and handling unit, additional 4 tool loading stations; Control: Sinumerik 840D powerline Technical DataDrive power (100% DC)13,2 kWDrive power (40% DC)22 kWTorque (40% DC)100 NmSpeed range20-12000 rpmB axis, slide 1Swivelling range+/- 120 degreeSlide 3Transverse stroke1500 mmRapid traverse Z36 m/minSlide 2Longitudinal stroke1400 mmTransverse stroke225 mmRapid traverse X24 m/minRapid traverse Z40 m/minSlide 1Longitudinal stroke1585 mmTransverse stroke550 mmY axis, vertic ...
used
Fully hydraulic closing system, MC 4 control system with color monitor, integrated control panel and built-in disc drive. 1 complete plasticizing system for thermoplastics with a screw diameter of 45 mm - Levels for the foundation of the Nolato machine - Hydraulic blockade of reverse rotation of the auger - Hydraulic auger drive with standard speed - SVO open nozzle in 2-piece design (nozzle body with screw-in nozzle). - A device for sorting good and defective parts. Pneumatic pendulum. Pendulum speed approx. 3 sec. Free-standing device under the machines discharge shaft. Including electrical standard connector and software (Pos. 42.42). - Single pneumatic valve on the movable mold clamping plate for the blowing function (1 piece of 3/2 separating valve with 1 magnetic coil). Control to choose between road/time or time/time. Possibility to manually set the flow using 1 thrott ...
used
pressure: 1200 kN chamfer lenght: 3110 mm distance between columns: 2690 mm dayligth: 347 mm tiltable up to: +/- 3 Grad throat: 420 mm table width: 100 mm work height max.: 1000 mm rapid traverse y-axis: 200 mm/min speed: working cycle y-axis: 10 mm/s return travel y-axis: 180 mm/s x-axis: 500 mm/s r-axis: 200 mm/s z-axis: 1000 mm/s 0: y-axis: +/- 0,01 mm x-axis: +/- 0,05 mm r-axis: +/- 0,01 mm movement: y-axis: 200 mm x-axis: 600 mm r-axis: 340 mm Control: total power requirement: 18,5 kW weight of the machine ca.: 8,3 t dimensions of the machine ca.: 3,60 x 1,75 x 2,33 m control: 2D-colour-graphic control DELEM T 3000 inclusive tooling The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Description: machine no.: KMM 526 1213 operating voltage: 400 V frequency: 50 Hz , nominal current: 45 A pre-switching fuse: 3 x 50 A control system: SIEMENS SINUMERIK 840 D working spindle: , spindle bearing ,diameter: 70 mm , tool holder: SK 40 , Max. torque value: 45 Nm , spindle speed: 36 – 10500 rpm tool magazine: , number of tools: 42-fold tool clamping: 8000 N , Max. tool diametre: 125 mm , Max. tool length: 250 mm , feed rate: X-axis: 10000 mm/min , Y-axis: max. 10000 mm/min , Z-axis: max. 10000 mm/min , rapid traverse: , X-axis: 60 m/min , Y-axis: 60 m/min , Z-axis: 60 m/min , Max. feed force: , X-axis: 4000 N Y-axis: 4000 N , Z-axis: 8000 N , chiping values: , Max. milling performance: 460 cm³ , Max. drill diameter: 40 mm , Max. thread diameter: M30&nbs ...
used
Description: 4-axis horizontal machining center Serial number 213 Working capacity: 720 x 700 x 650 mm Working table: 500 x 500 mm Max. table load capacity: 800 kg Spindle speed: 80-8000 Rpm Automatic pallet changer 2 pallets Pallet change time: 7 sec. Tool magazine with 120 positions Taper BT 40 Max. tool length: 320 mm Tool changeover time: 1.5 sec. Travels: Longitudinal table travel (X-axis): 720 mm Vertical travel of the spindle (Y axis): 700 mm Column longitudinal stroke (Z-axis) 650 mm Distance from the table surface to the spindle axis: 100 - 800 mm Distance from spindle to table center 150 - 800 mm. Rapid feeds: X, Y and Z axes: 36.000 mm/min B-axis: 3 sec/90°. Cutting feed rate: X, Y and Z axes: 0.1~20,000 mm/min B-axis: Not applicable for 1° table Positioning accuracy: X-, Y-, Z-axis: ± 0.001 mm B-axis (1st-360 positions): ± 2 sec. Repeatability accuracy: X-, ...
used
New CNC working machine brand: Cosmec Type: Smart 30, 5 Achsen Configuration example: other equipment possible on request The smart serie: - Flexibility through cantilever construction - Best equipped for door processing - Protection by laser system (instead of step mats) - Especially good for machining light / small workpieces The controlling: OSAI CNC system control + Aspan CAD-CAM software: - Aspan uses simple commands to execute the machining process - By entering dimensions you can precisely position the machining operations - The machining operations are displayed on the virtual workpiece. - Diverse macros facilitate programming (of holes, slots, linear milling, arc milling...) Aspan Doors - Software module for easy creation of programs for door processing. - Different door types are already stored (doors with milled arches, round doors...) - Doors can ...
used
Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Positions ATC: 0 Distance between uprights: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Table length: 8000 mm Table width: 2800 mm Travels: Y axis: 9000 mm Z axis: 1250 mm W axis: 2200 mm Distance table to spindle max.: 2806 mm Distance between columns: 3200 mm Table load max.: 64000 kg Taper in spindle: 60 ISO Spindle speeds: number (steps): 16 from: 20 rpm up to: 600 rpm Feeds: X axis from: 5 mm/min up to: 3000 mm/min Y axis from: 5 mm/min up to: 3000 mm/min Z axis from: 5 mm/min up to: 2000 mm/min W axis from: 5 mm/min up to: 750 mm/min Creep speeds: X axis: 5 - 3000 mm/min Y axis: 5 - 3000 mm/min Z axis: 5 - 2000 mm/min W axis: 5 - 50 mm/min Voltage 50 Hz 3x: 380 Volt Spindle motor: 100 kW Overall dimensions about: Length: 21000 mm Width: 7800 mm Height: 6622 mm