We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,372 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Description: Material: 20CrMnTi, Usage: Suitable for grinding,milling,precision machining,double use vertical and horizontal V-groove jaw. Hardness: HRC58-62 (80x100 mm, h 40 mm) The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 255 x 120 x 120 mm, weight approx.: 10 kg
used
Description: Material: 20CrMnTi, Usage: Suitable for grinding,milling,precision machining,double use vertical and horizontal V-groove jaw. Hardness: HRC58-62 (80x100 mm, h 40 mm) The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 255 x 120 x 120 mm, weight approx.: 10 kg
used
Description: Material: 20CrMnTi, Usage: Suitable for grinding,milling,precision machining,double use vertical and horizontal V-groove jaw. Hardness: HRC58-62 (80x100 mm, h 40 mm) The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 255 x 120 x 120 mm, weight approx.: 10 kg
used
Description: Material: 20CrMnTi, Usage: Suitable for grinding,milling,precision machining,double use vertical and horizontal V-groove jaw. Hardness: HRC58-62 (100x125 mm, h 45 mm) The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 280 x 140 x 140 mm, weight approx.: 15 kg
used
Description: Material: 20CrMnTi, Usage: Suitable for grinding,milling,precision machining,double use vertical and horizontal V-groove jaw. Hardness: HRC58-62 (100x125 mm, h 45 mm) The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 280 x 140 x 140 mm, weight approx.: 15 kg
used
Description: Magnetic force 600 Kg - permanent. Dense polarity for machining small and thin pieces. High-strength magnet system. Activation and deactivation by hand lever. In the OFF position, a weak reverse shot takes care of facilitating the removal of parts. With longitudinal and transverse stop. NOTE: Free shipping to many European countries. Details can be found in the Special Terms & Conditions of this auction. Approximate shipping time: 15 working days after settlement. The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 260 x 300 x 135 mm, weight approx.: 18 kg
used
Description: Magnetic force 300 Kg - permanent. Dense polarity for machining small and thin pieces. High-strength magnet system. Activation and deactivation by hand lever. In the OFF position, a weak reverse shot takes care of facilitating the removal of parts. With longitudinal and transverse stop. NOTE: Free shipping to many European countries. Details can be found in the Special Terms & Conditions of this auction. Approximate shipping time: 15 working days after settlement. The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 220 x 250 x 130 mm, weight approx.: 9 kg
used
Description: Magnetic force 40 KGF - permanent. Dense polarity for machining small and thin pieces. High-strength magnet system. Activation and deactivation by hand lever. In the OFF position, a weak reverse shot takes care of facilitating the removal of parts. With longitudinal and transverse stop. The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 550 x 450 x 195 mm, weight approx.: 90 kg
used
Description: Magnetic force 40 KGF - permanent. Dense polarity for machining small and thin pieces. High-strength magnet system. Activation and deactivation by hand lever. In the OFF position, a weak reverse shot takes care of facilitating the removal of parts. With longitudinal and transverse stop. The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 550 x 350 x 110 mm, weight approx.: 70 kg
used
Description: Magnetic force 40 KGF - permanent. Dense polarity for machining small and thin pieces. High-strength magnet system. Activation and deactivation by hand lever. In the OFF position, a weak reverse shot takes care of facilitating the removal of parts. With longitudinal and transverse stop. The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 460 x 350 x 200 mm, weight approx.: 70 kg
used
Description: TAPS AND DIES SET 40 pcs. Professional set made of heat treated steel alloy. Taps and dies suitable for making threads on mild steel and aluminum. Supplied with key for taps and tapping bits. Protective case for transport and to always have them in order. The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 330 x 210 x 50 mm, weight approx.: 2 kg
used
Description: TAPS AND DIES SET 40 pcs. Professional set made of heat treated steel alloy. Taps and dies suitable for making threads on mild steel and aluminum. Supplied with key for taps and tapping bits. Protective case for transport and to always have them in order. The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 330 x 210 x 50 mm, weight approx.: 2 kg
used
Description: TAPS AND DIES SET 40 pcs. Professional set made of heat treated steel alloy. Taps and dies suitable for making threads on mild steel and aluminum. Supplied with key for taps and tapping bits. Protective case for transport and to always have them in order. The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 330 x 210 x 50 mm, weight approx.: 2 kg
used
Description: Chuck for self-centering lathe 3 + 3 jaws 500 mm, body in ground cast iron, closing with helical ring, concentric manual clamping, tempered jaws The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 570 x 600 x 280 mm, weight approx.: 124 kg
used
Description: TAPS AND DIES SET 40 pcs. Professional set made of heat treated steel alloy. Taps and dies suitable for making threads on mild steel and aluminum. Supplied with key for taps and tapping bits. Protective case for transport and to always have them in order. The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 330 x 210 x 50 mm, weight approx.: 2 kg
used
Description: Chuck for self-centering lathe 3 + 3 jaws 400 mm, body in ground cast iron, closing with helical ring, concentric manual clamping, tempered jaws The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 500 x 470 x 245 mm, weight approx.: 74 kg
used
Description: Chuck for self-centering lathe 3 + 3 jaws 320 mm, 1200 r/min, body in ground cast iron, closing with helical ring, concentric manual clamping, tempered jaws The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 385 x 390 x 250 mm, weight approx.: 48 kg
used
Description: Chuck for self-centering lathe 3 + 3 jaws 250 mm, 1600 r/min, body in ground cast iron, closing with helical ring, concentric manual clamping, tempered jaws The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 320 x 320 x 210 mm, weight approx.: 20 kg
used
Description: Chuck for self-centering lathe 3 + 3 jaws 200 mm, 2000 r/min, body in ground cast iron, closing with helical ring, concentric manual clamping, tempered jaws The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 220 x 280 x 280 mm, weight approx.: 20 kg
used
Description: Chuck for self-centering lathe 3 + 3 jaws 160 mm, 2500 r/min, body in ground cast iron, closing with helical ring, concentric manual clamping, tempered jaws The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 230 x 200 x 150 mm, weight approx.: 9 kg
used
Description: Chuck for self-centering lathe 3 + 3 jaws 125 mm, 3000 r/min, body in ground cast iron, closing with helical ring, concentric manual clamping, tempered jaws The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 190 x 190 x 180 mm, weight approx.: 7 kg
used
Description: Chuck for self-centering lathe 3 + 3 jaws 125 mm, 3000 r/min, body in ground cast iron, closing with helical ring, concentric manual clamping, tempered jaws The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 190 x 190 x 180 mm, weight approx.: 7 kg
used
Description: Chuck for self-centering lathe 3 + 3 jaws 100mm, 3500 r/min, body in ground cast iron, closing with helical ring, concentric manual clamping, tempered jaws The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 165 x 175 x 180 mm, weight approx.: 3 kg
used
Description: Chuck for self-centering lathe 3 + 3 jaws 80mm, body in ground cast iron, closing with helical ring, concentric manual clamping, tempered jaws The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 150 x 150 x 155 mm, weight approx.: 3 kg
used
Description: Chuck for self-centering lathe 3 + 3 jaws 80mm, body in ground cast iron, closing with helical ring, concentric manual clamping, tempered jaws The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 150 x 150 x 155 mm, weight approx.: 3 kg
used
Description: Chuck for self-centering lathe 3 + 3 jaws 80mm, body in ground cast iron, closing with helical ring, concentric manual clamping, tempered jaws The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 150 x 150 x 155 mm, weight approx.: 3 kg
used
Description: Collet Chuck Tool holder SK40-ER32-100. DIN69871, G2.5 25000 rpm. Mat: 20CrMnTi 0,003. Set 5 pcs The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 380 x 210 x 100 mm, weight approx.: 9 kg
used
Description: Collet Chuck Tool holder SK40-ER20-100. DIN69871, G2.5 25000 rpm. Mat: 20CrMnTi 0,003. Set 5 pcs The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 380 x 75 x 197 mm, weight approx.: 7 kg
used
Description: Collet Chuck Tool holder SK40-ER25-100. DIN69871, G2.5 25000 rpm. Mat: 20CrMnTi 0,003. Set 5 pcs The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 380 x 75 x 197 mm, weight approx.: 14 kg
used
Description: Material: 20CrMnTi, Usage: Suitable for grinding,milling,precision machining,double use vertical and horizontal V-groove jaw. Hardness: HRC58-62 (150x200 mm, h 50 mm) The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 370 x 180 x 140 mm, weight approx.: 22 kg
used
Description: Collet Chuck Tool holder SK40-ER16-100. DIN69871, G2.5 25000 rpm. Mat: 20CrMnTi 0,003. Set 5 pcs The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 380 x 75 x 197 mm, weight approx.: 12 kg
used
Description: Set of 18 precision spindles ER40, from 4 to 26 mm, for CNC machines, for engraving and milling, in metal case The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 340 x 210 x 100 mm, weight approx.: 7 kg
used
Description: Set of 16 ER32 precision chucks, from 2 to 20 mm, for CNC machines, for engraving and milling, in metal case The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 200 x 200 x 100 mm, weight approx.: 5 kg
used
Description: Professional cone remover for BT-40/HSK63F, allows the disassembly of the cones with precision without damaging the surface and balancing of the cone and tool. The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 210 x 120 x 120 mm, weight approx.: 2 kg
used
Description: Professional cone remover for BT-40/HSK63F, allows the disassembly of the cones with precision without damaging the surface and balancing of the cone and tool. The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 210 x 120 x 120 mm, weight approx.: 2 kg
used
Description: High precision collet vice with a jaw width of 160 mm. jaw opening: 160 mm The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 460 x 320 x 170 mm, weight approx.: 29 kg
used
Description: High precision collet vice with a jaw width of 160 mm. jaw opening: 160 mm The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 460 x 320 x 170 mm, weight approx.: 29 kg
used
Description: Professional cone remover for BT-40/HSK63F, allows the disassembly of the cones with precision without damaging the surface and balancing of the cone and tool. The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 210 x 120 x 120 mm, weight approx.: 2 kg
used
Description: Tilt orientation: 30° 45° 60° 90° 60° 45° -->, 105°  , Disc diameter: 360 mm, thickness: 3.2 mm Equipped with engraver diameter: 130 mm and thickness: 3.2 mm. cutting length: 2,050 mm, table length: 3,000 mm, cutting width: 1,860 mm, scoring saw: di spessore 3,2 e diametro 130 mm fine testo libero kW, swival range +/-: da 30 di orientamento 105 gradi inizio questo libro orientamento da 30 90 gradi a 45 gradi quindi 30 45 60 90 60 45 diametro disco 360 spessore 3,2 dotata di °, Approx. Onsite Dimension. (l x w x h): 3,800 x 3,600 x 1,700 mm, weight approx.: 1,600 kg
used
We offer you Truck+Box Body Mercedes-Benz Atego 818 from a current recycling. Year of construction 2009 (registration date 12.03.2009) Condition: Defective control unit Original price: Asset Manager: Birgit Heinemann Phone: 0202 257273153 Mail: b.heinemannakf.de We will be happy to provide you with details upon request. Location: 28816 Stuhr The sale is without warranty Subject to prior sale
used
vacuum shrink packer More then 300 machines new and second hand on our seema .de
used
Description: control: FAGOR  , centre height: 260 mm distance between the centres: 1500 mm spindle speed: 2000 rpm power: 20 kW turret head: 4 Pos. control: FAGOR, turning speed range: 2,000 rpm, total power requirement: 20 kW, weight approx.: 2,800 kg, Approx. Onsite Dimension. (l x w x h): 3,000 x 1,500 x 1,800 mm
used
Max. output: 8000 bottles/h, bottle dimensions: 50-95x140-340mm, filling height: 20-70mm, length: 2960mm, width: 2830mm, height: 3250mm, weight filler, substructure, cladding and accessories: 7.8t, the filler is designed for filling still fruit juice at 85°C, the following closures can be processed via the quick-change adapter (set-up time per head 1min), aluminum screw cap 28 TS RO PP (MCA28), VC 30x60 (BVS 30/60) and pick & place plastic screw cap with 38mm magnetic torque head, with adjustable bottle guide stars in the infeed and discharge, quick-change profiles for frogs, remote maintenance possible, motorised fill level regulation in the range of 50mm, boiler quick emptying, cleaning of the valves via cleaning tray possible, nozzles for valve external cleaning, glass bottles via centring tulip holder under filling valve and PET bottles with neck-handling adapter.
used
Width 110 cm 13 kW You can call or write to us. We can speak and write German and Russian. You can also send messages in English 32.4.10.
new
faceplate diameter:1250 mm swing diameter:1600 mm turning height:1350 mm max. turning diameter:1350 mm weight of the machine ca.:32 t Chip Conveyor Coolant Tank Oil/Water Separator Machine Cover (High guarding) Heat exchanger For Electrical Cabinet Auto Lubrication for Guide way 4 Jaw Manual Chuck 1600mm Hydraulic Unit BT50 Tool Connection in RAM Metal frame and case in machine shipment packing(Wooden packing with metal base) 3 colors Warning Light Chamber light Anti- Dropping in Z axis -- Auto Motor Brake System Options Installed Air Conditioner For cabinet Coolant Through Spindle Filter for Coolant Water CE Mark Transformer
used
Dividing head with centering point and lathe chuck, dividing head, dividing table AVIA type FNCb Center height 110 mm spindle bore: Ø 26 mm < -br /> -90° - +90° rotatable -10° - +10° tiltable Mounting foot: 255 x 200 mm Turning chuck with second set of jaws chuck diameter: Ø 125 mm used, tested ! Dimensions: 600 x 400 x 270 mm
used
Type: 100 FSG, Y&l: 1986, granulation plant with circular gas operation, sifter 100 ATP (4 kW Vario, up to 11,500 rpm), and reblow filter K 6 R (2.4 m2 filter area). All in stainless steel. Very good condition.
used
Y.J.: 1988, in robust version with rectangular flange attachment, suitable for temperatures up to 120C, as good as new condition.
<br><br><br>Still in operation: Yes<br>Verf Gbar: Immediately
used
45 - 160 kW.