avia at used for sale

Atlas Copco/Kaeser Package KW 11 - KW 250

sheet width: 3050 mm plate thickness: 12 mm distance between columns: 3100 mm table height over floor: 900 mm cutting angle adjustment: 0,5 - 3 ° no. of strokes: 6 - 13 Hub/min back stop - adjustable: 1000 mm down holder: 18 St oil volume: 350 l total power requirement: 22,5 kW weight of the machine ca.: 8 t dimensions of machine L x W x H: 3,96 x 2,38 x 2,22 m Accessories: electr. back gauge, spare knives The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

STANDARD-EQUIPPED

sheet width: 3050 mm plate thickness: 6 mm distance between columns: 3100 mm back stop - adjustable: 750 mm cutting angle adjustment: 0,5 - 3,0 ° no. of strokes: 9 - 17 Hub/min table height over floor: 775 mm total power requirement: 7,5 kW weight of the machine ca.: 4,5 t dimensions of machine L x W x H: 3,75 x 1,65 x 1,7 m Accessories: electr. back stop, angle front stop, table extensions, spare knives The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

ATMSolutions ATMS 2030 150W laser cutting machine was built in 2018 in Poland. Distinguished by state-of-the-art solutions and components, the machine is used for precision cutting and engraving of a wide range of materials, i.e. rubber, wood and leather. Its deformation-resistant design with a large, 3000 mm long and 2000 mm wide through-table makes it possible to achieve high working speeds while maintaining maximum stability. Axis movement is performed by a top-of-the-range drive system consisting of linear guides with ground tracks and linear carriages, which ensures the highest positioning accuracy. The professional LaserWork control software for operating the machine supports the most important file formats and works directly with the most popular graphics programs (CorelDraw, AutoCAD, etc.). The CO2 laser ATMS 2030 is offered with a wide range of equipment, including, among others ...

Hydraulic guillotine shears Manufacturer Atlantic Type ATS3000 Year of construction 1996 max cutting thickness 6,0mm cutting length 3050mm New knife on machine in addition there are 2 knives plus 1 stump once new Machine is fully functional, has not been energized for 4 months Anschäge, circulation and documentation available.

Type / type: ATSL 3013 Fabr./ make: Atlantic Year of construction/ year: 1992 Stock number: 0969 Sheet thickness with largest sheet width/ thickness at max. cutting length: 13 mm ( mild steel ) 6 mm ( stainless steel / high grade steel) Cutting length: 3050 mm Weight/ weight: approx. 8.6 t Specification: Backstop

sheet width: 3050 mm plate thickness: 12,0 mm ST plate thickness: 8,0 mm VA no. of strokes: 7 - 14 Hub/min down holder: 18 Stück cutting angle: 0,5 - 3,0 ° work height max.: 930 mm back stop - adjustable: 1000 mm Number of working hours: 18.822 h total power requirement: 22,5 kW weight: 8.500 kg range L-W-H: 4180 x 2030 x 2210 mm Furnishing: - Robust hydraulic, link-guided guillotine shears - Electro-motor backgauge with analogue display Fine adjustment via hand wheel, front left - Control panel, front left - manual cutting gap adjustment, from behind - electro-hydraulic cutting angle adjustment - Front finger protection - Stable front support table - 1x side stop with T-slot and millimeter scale - 3x support arms - 1x free moving footswitch - User manual (PDF) Machine link : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008 -9325234 The data for this ad was c ...

sheet width: 3050 mm plate thickness: 6,0 mm cutting angle: 0,5 - 3,0 ° down holder: 18 Stück no. of strokes: 9 / 14 Hub/min back stop - adjustable: max. 750 mm Control: konv. engine output: 10,0 kW weight: 4800 kg range L-W-H: 3750 x 1600 x 2450 mm Furnishing: - electro-hydraulic / slide-guided sheet metal shears - front control panel, left - easy to use - with electro-hydraulic cutting angle adjustment - with manual cutting gap adjustment, from the rear - electro-motorized back gauge 10-750 mm - with analogue position display + handwheel for fine adjustment - 1x extra long, robust side stop .. 3,000 mm - 1x extra long, robust support arm - 1x freely movable foot switch - front finger/encroachment protection - 2x EMERGENCY stop buttons at the front - User manual (PDF) Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008 -9325333 The data for this ad  ...

Specifications: - max. working width 3050 mm - max. cutting capacity St 40 6 mm - Cutting angle adjustable mot. 0,5 - 3 ° - Cutting gap adjustment by hand - Number of hydraulic hold-downs 18 pcs -Mot. - Back gauge 10 - 750 mm - Front angle stop + support arms - Stroke rate depending on cutting angle and cutting length 9 - 17 per/min - Hydraulic drive 400 V / 7.5 kW - Table height 770 mm - Space requirements incl. back gauge, without front support arms -ca. W 3750 x H 1600 x D 1650 mm - Weight approx. 4500 kg - with: - E. - Foot - Switch - Cutting line illumination

EDGE GLUING MACHINE Manufacturer: OTT Austria Type: Euromatic Year built: 1998 CE standard Function : glue-cap-pre-fraesen-fine-fraesen-round-under-round-copy-zieklinen-pol ishing

Material: stainless steel V2A Engine: 0,25 kW Weight: 200 kg Length x Width x Height 1000 mm x 1000 mm x 900 mm Machine data: Machine in gas-proofed version, with rotating screen-frame; screening area per deck : 0,3 m². Optional: ballcleaning, sreen insert on choice : 0,1 - 2 mm. Very good condition. You can also get the entire system with all components.

Brevetti ATM 15 duplex (2 x modules) automatic inspection machine for syringes, currently set for 10.85mm diameter syringes (long and short needle), output up to 133/minute per module (266 per minute total). Each module is fitted with 6 control stations for presence of bung, reflective particles, fill height and bung position, needle cover, non-reflective particles, plus turbidity meter. Each module has 3 reject channels plus pass. One module is ATM15 SX year 2008, the second is ATM15 DX year 2007. Both units operate from one control panel.

Air heater Manufacturer: GEA Happel Klimatechnik GmbH Type: MAXX M311D. BA3. X ATYPE Year of construction: 2004 Technical data: Rated voltage: 3 x 400 / 50 V/Hz Nominal power: 0.30/0.17/0.12 A Protection class: IP54

Orange juicer CITROCASA 8000 SB-ATS Advance The 8000 SB ATS (Automatic Transport System) sets completely new standards in terms of ease of use and automation. The ideal solution in the highly frequented self-service area. The automatic transport system keeps the juice zone free of any peels, kernel or pulp residues Start of the pressing process by pressing the tap High capacity of the fruit storage basket (21 kg) Stainless steel design of all important components Digital counter of the total pressed oranges purest orange juice through sCs up & down cutting system Easy cleaning thanks to Double Cover and Cross Holder Machine stops automatically when the shell container is full Capacity: 40 oranges per minute Dimensions machine: H180 x W100 x D65 cm Dimensions storage trolley: H100 x W52 x D53 cm Machine & wagon can be driven on deflection ro ...

DYNAJET 500th HELI ATC RC INTRODUCTORY OFFER: If you want to be sure that this device is right for you, then we have a special offer for you: Crediting of rents for up to 6 months at 100% of the purchase price! The mobile and universally applicable dynaJET cold and hot water high-pressure cleaner In addition to its user-friendliness, 500th with up to 500 bar working pressure is characterized in particular by its low weight, compact dimensions and high level of performance and safety. Construction 1-axle chassis with pneumatic tyres for easy manoeuvring on site Self-supporting and indestructible framework for weight optimization Crane eyelet for easy transport and handling Underrun protection for additional safety Frame in dip painting technology for high corrosion protection and highest surface quality Targa concept with separation between unit side and operating side f ...

RECON - complete ground to 1st level undersize 204,5 mm - pn. X11.02001-9047 - incl. counterweights ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us

CNC carousel lathe with tool changer.You Ji GTH-35/45 ATC-I. Built 2012.Fanuc 0i-TD CNC Control.Planchime diameter 3,500 mm.Hydrostatic table - Max load 50 t.swing diameter max. 4,500 mm.Turning diameter max. 4,000 mm.turning height max. 2,200 mm.Stoesselplanweg X -1.750/+2.160 mm.Stoesselsenkrechtweg Z 1.500 mm.Table drive 60/75 kW.Speed 2 x 75 mm.Torque at the table 67,330 Nm.Tool magazine with 16 places.Tool holder 7/24 BT 60.Place requirement 12,375 x 8,210 mm.Machine height 7,920 mm.Full cladding.3-colors Signal lamp.NEW - 200 operating hours ! Immediately available;; As good as new

CNC Vertical Lathe VTL with Tool Changer.You Ji GTH-35/45 ATC-I.Year of manufacture 2012.Fanuc 0i-TD CNC Control.Face plate diameter 3500 mm.Hydrostatic table - Load max. 50 t.Swing diameter max. 4500 mm.Turning diameter max. 4000 mm.Turning height max. 2200 mm.Ram cross travel X -1750/+2160 mm.Ram vertical travel Z 1500 mm.Table drive 60/75 KW.Table turning speeds 2 ~ 75 mm.Torque at the table 67330 Nm.Tool magazine with 16 positions.Tool taper 7/24 BT 60.Floor space required 12375 x 8210 mm.Machine height 7920 mm.Full guarding.3-colour signal lamp (tower).AS NEW - 200 run hours !Available immediately.; As new

Te Koop: Endress & Hauser Flow monitor (droogloopbeveiliging) T trend type: Att12-A11D11B6D1. Bestelnummer 700.1

Te Coop: Endress & Hauser flow monitor T trend ATT12 A21D11B6D1

Edge banding machine OTT Type: ATLANTIC V 6 B.J.: 1998 Glue unit / also polyurethane adhesive can be Cut from the edge Green cut front and rear Simple milling Profile milling Profile cyclin Simple cyclin Speed 12 m / min Overall dimensions: 0.400 cm, 95 cm wide, 130 cm high; Weight: 1,400 kg

Manufacturer: Hinke Model: ATS Sudmo Capacity: 6400 l Pressure tank up to 5 bar

Stock# UG6236 Little used vertical gap mill by Bauermeister (Germany) type GM 80.1 EX. Machine is driven by el motor 75 kW, 3000 rpm. Working output depends on product and can reach up to 800 kg/h. Maximal feed size up to 1.5 mm. Reported maximal output finess up to 200 microns. Mill has adjustable gap in range from 1 up to 5 mm and is equipped with ASIMA rotor working with speed up to 123 m/s. Milling elements designed in hardened steel. Mill has ATEX Ex II 1/2D T 100 C certificate. Shipping dimensions: L 2140 mm x W 1270 mm x H 1470 mm x W 1900 kg.

Athens ECO 250XL(-) LED VSAD with push-back system Production year 2018

Panaroma Model: AT400 Pasta stacking and cutting machine Serial: 1229 2002, Stainless stacking and cutting machine, 400mm width, designed to roll, to dust, to cut and to overcome the pasta sheet layers, suitable for lasagne or tagliatelle. Output up to 100Kg / hour, variable speed, with timer, 3ph, mobile

Bertolaso Athena 75/15 Vacuum filler Bertolaso Year: 1991 with 75 filling valves and 15head aluinium screw capper Running direction: left to right

Part washer with basket Basket size: 630x450x300 Have 6 pcs Max part weight: 150 kg Cycle time: 6-15 min Machine parts: washer dryer evaporator cooler (with water or with air) With solvent regenerator Dimension: 5300x1800x3200 Weight:4400 kg Power: 118 kW Washing room capacity: 290 l

Inverter, frequency converter Power 15 kW Voltage: 3 phase, 380V Frequency: 0,1-500 Hz

Atomo 3.0, max pressure 600 bar, Flow Rate 150 l / h, two-stage homogenizing valve Suitable for various foods Demonstration device, like new The new price is around Euro 32.000

In original box. Never used Pfeiffer Adixen Alcatel ATH 1600 M Turbomolecular Vacuum Pump - 5-axis magnetically levitated turbopump with drag stage for a pump speed of up to 1,400 l/s for N2.

Masterwood Italy CNC Ventilation Center for Door and Window Production Type Woodmaster ATLAS Built in 2000 SN 00120018 for the processing of solid wood and panel material, etc. Working strokes of the axles: X Axis 3900mm Y Axis 1785mm Z- Axis 630mm Workspace X Axis 3500mm Y Axis 1210mm Z- Axis 210mm Max speed of axles 60-50-20m/min 6 edition consoles Workpiece clamping device Electric main spindle with ISO 30 intake 6.8 kW 24,000rpm Saw unit integrated in the work unit Automatic change of tools 18 positions Numerical control SINCRO with industrial PC and keyboard Safety tread mats Vaccum Pump Total required power 27 Kw Care pressure 6-7 atm Compressed air consumption per arebit cycle 200-300Nl/min Suction speed 25-30m/sec Air consumption 5000m3/h 400 V/ 50 Hz Weight 4500 Kg Technical information subject to reservation

TECHNICAL DATA: Motor HP: 6

thread dia.: 12 mm threading length: 20 mm turning speeds: 400 U/min working area: 500 - 1600 mm weight of the machine ca.: 25 Kg dimensions of the machine ca.: m • pneumatical thread cutting device, M3 - M12, • with 6 adapters of thread cuttings, Size 1, • control valve with lubrication, • order no. 31681, The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thread dia.: M2 - M 12 mm : 9,5 mm turning speed range - thread cutting: 250 U/min collet holder: 6 / M2 - M12 Air consumption: 0,4 l/min. turning speeds: 250 U/min weight: 4 kg Pneumatic driven tapping pistol for quick operation on spot. Professional excecution. Standard collets do fit. Features: pneumatic drive system wrench The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

4 up CTP thermal Manufacturer: Heidelberg Model: Suprasetter A74 ATL 2008 plate count 213.000 Meta Shooter 3.5 Wash unit Platestacker Price: on request

SUITABLE FOR PRINTING: BOPP, PP ,CAST, ALU, LDPE, NYLON, PETP, OPA, Paper, PE, CPP, BOPET BOPP: 10 - 100 microns CPP: 20 - 100 microns PET: 12 - 80 microns Printing Width: 1200 mm Web Width: 1300 mm Printing repeat: max 800 mm, min 350 mm max roll diameter: Unwinder: 1000 mm. Rewinder: 1000 mm. Drying System: electrical Ink type: solvent, Water base System: sleeved , Geared, Sleeve Width 1300 mm 35 - 5 pcs 38 - 6 pcs 40 - 6 pcs 45 - 6 pcs 48 - 4 - pcs 50 - 6 - pcs 55 - 6 - pcs 60 - 6 - pcs 66 - 4 pcs 69 - 5 pcs Anilox : 300 - 2 pcs , 220 - 2 pcs, 120 - 1 pcs, 100 - 1 pcs.

DYNAJET 500th HELI ATC RC INTRODUCTORY OFFER: If you want to be sure that this device is right for you, then we have a special offer for you: Crediting of rents for up to 6 months at 100% of the purchase price! For purchase: Including 1st UVV WITH arrival and maintenance (plus spare parts) on the same date (value approx. 1,500 net). The mobile and universally applicable dynaJET cold and hot water high-pressure cleaner In addition to its user-friendliness, 500th with up to 500 bar working pressure is characterized in particular by its low weight, compact dimensions and high level of performance and safety. Construction 1-axle chassis with pneumatic tyres for easy manoeuvring on site Self-supporting and indestructible framework for weight optimization Crane eyelet for easy transport and handling Underrun protection for additional safety Frame in dip painting technology  ...

USED STERLING SIHI CBED CHEMICAL PROCESS PUMP

MANUFACTURER: Niro Atomizer CAPACITY: 1.183 Kg/h, , APPLICATION: Milk powder and whey powder production. MACHINE COMES WITH: External vibro fluid bed dryer, Niro F35 atomizer, powder cyclones, bag filters, air pre heating economizer unit, air heating unit with steam heat exchangers, vibro sieve powder calibration unit, air ventilators, air locks, rotary valves and many accesories...

Stainless steel VERSA-MATIC ATEX diaphragm pump

BARATTI FRAMED VACUUM PUMP WITH SUCTION FILTER AND SILENCER Fabr. -No.: 216 105 // Type: ATMOS V4-KR Var. 0102 Equipment / Additional information: Roots Blower Section. oil and wear-free compression, air-cooled, V-belt drive with tension rails and belt guard and two-stage exhaust silencer Incl. the following accessories: -Vacuum relief valve -saugs. Fine filter 3" -Connection piece internal thread 3" - Rohrfederman. -1..0 bar, filled with glycerine -Drive motor Blower data: Max. negative pressure: 500 mbar, abs. Suction volume: 440 m3/h Fan speed: 2920 rpm Noise level: approx. 79 dB (A) Engine data: 7.5 kW, 2930 rpm, 400/690 V, 50 Hz, IP 55 ISO class F, B3, KKL

BARATTI FRAMED VACUUM PUMP WITH SUCTION FILTER AND SILENCER Fabr. -No.: 217 325 // Type: ATMOS V4-KR Var. 0102 Equipment / Additional information: Roots Blower Section. oil and wear-free compression, air-cooled, V-belt drive with tension rails and belt guard and two-stage exhaust silencer Incl. the following accessories: -Vacuum relief valve -saugs. Fine filter 3" -Connection piece internal thread 3" - Rohrfederman. -1..0 bar, filled with glycerine -Drive motor Blower data: Max. negative pressure: 400 mbar, abs. Suction volume: 440 m3/h Fan speed: 2920 rpm Noise level: approx. 79 dB (A) Engine data: 7.5 kW, 2930 rpm, 400/690 V, 50 Hz, IP 55 ISO class F, B3, KKL

: 135 t : 3100 mm : 2600 mm : 400 mm : 200 mm : 800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.