available used for sale

Machine name: Paddle dryer used Manufacturer: AVA / Holland Merten GmbH Type: HTK 200 Year of construction: 2002 Speed: 107 rpm Material: Stainless steel Drive motor: 5.5 KW Version: EExdellCT4 Total capacity: 235 liters Wetted parts: stainless steel 1.4571 Gearbox:Helical gear motor Equipment: Double jacket, mechanical seal, wave heating Dimensions: L 3400 x W 1100 x H 1500 mm Empty weight: approx. 1600 kg Tech. Documentation: yes available Note: Operating temperature 130°C Design temperature 200°C Internal pressure mixer -1/+3 bar Pressure double jacket +6 bar Accessories: Base frame, Maierkopf HWR 225 Condition: Used very good Price: on request

Machine name: Continuous horizontal mixer dryer used Manufacturer: AVA / Holland Merten GmbH Type: HTK 200 Year of construction: 2002 Speed: 107 rpm Material: 1.4301 Drive motor: 5.5 kW Hsyqeirqy Version: EExdellCT4 Total capacity: 235 litres Wetted parts: stainless steel 1.4571 Equipment: Double jacket, mechanical seal Dimensions: L 3400 x W 1100 x H 1500 mm Empty weight: approx. 1600 kg Tech. Documentation: Yes Note: Operating temperature 130°C Design temperature 200°C Internal pressure mixer -1/+3 bar Pressure double jacket +6 bar Accessories: Base frame Condition: Used Price: On request

Continuous mixer, single-shaft mixer, trough mixer for bulk materials used Manufacturer: AVA-HUEP GmbH Type: HTK 2100 Year: 1999 Capacity 2090 l Temp max 80°C Mixer approx. Ø 900 x 2900 mm Outlet approx. 600 x 360 mm Drive with geared motor 55 kW RPM 380/660 V Dimensions Total approx. 6000 x 2000 x 2000 mm Changes and errors in the technical data, specifications and prices as well as prior sale reserved.

Rear silencer, exhaust system, muffler, silencer, charger carburetor, radiator, coolant cooler -Manufacturer: AVA, water cooler for BMW 3 Series unused OVP -Type: BW2081 -Dimensions: see photos -Carton dimensions: 660/140/H430 mm -Weight: 4.6 kg

General SKU401W1244 MakeAva-Huep LocationBarneveld TypeHTC2100 Main Features MaterialStainless steel Volume2100 Ltr. Motor55 KW Specified Features - Powder turbo mixer Powder turbo mixercheck T-arms10 pieces Capacity2100 l. Useful capacity1600 l. Trough sizesDia. 960x2800 mm Inlet900x1400 mm Inspection hatch550x300 mm OutletDia. 350 mm Max. temperature+5°C/+80°C Glands air purgedcheck Motor55 kW, 400 volt, 1460 rpm Speed mixing shaft35 rpm With lump breaker3x Motor5,5 kW, 400 volt, 1438 rpm (3x) MaterialStainless steel 1.4571 (316Ti) General No.5974 Year of construction2009 Floorspace5,72x1,76 m Total height1,36 m Weight5000 kg Extra SpecificationsWithout outlet lith.paddles are equipped with hardop welding.Fine chemicalsStarchOther chemicalAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesBiopharmaceuticalOther pharmaceuticsFood addi ...

General SKU053P249 MakeAVA-Hueb GmbH TypeHRM 600 No.M 5309-98 Year of construction1998 Mounted on framecheck Pressure Working pressure0.1 Bar Working pressure jacket1.5 Bar Main Features MaterialStainless steel Volume700 Ltr. Motor55 KW Specified Features - Paddle mixer Continuous mixercheck Useful capacity600 l. (bruto 700 l.) Trough sizesø 600 x 3000 mm Inlet450 x 630 mm Outlet450 x 330 mm With jacket2x 95 l. Motor55 kW, 380/660 V, 980 rpm MaterialStainless steel 1.4301 (304) With jacketcheck General LocationBarneveld Floor space5,2 x 1,0 m Total height1,25 mStarchAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesDiscountDetergent & surf.Other pharmaceuticsCosmeticsFood additivesSugarLubricants & oleoAnimal feedOther feedSolid pharmaceuticsDyes & pigmentsAPIMinerals & inorganicPaddle mixersGeneric medicinesPowdered foodsAva-HuepIndustrie ...

General SKU045R150 MakeAVA-Hueb GmbH TypePerlrussm. HRM 600 No.5257 Year of construction1997 Mounted on framecheck Pressure Working pressure0.1 Bar Working pressure jacket1.5 Bar Main Features MaterialStainless steel Volume700 Ltr. Motor55 KW Specified Features - Paddle mixer Continuous mixercheck Trough sizesø 600 x 3000 mm Inlet630 x 450 mm Outlet500 x 340 mm With jacket2 x 95 l. Max. temperature100 °C Motor55 kW, 400/690 V MaterialStainless steel 1.4301 (304) With jacketcheck General LocationBarneveld Floor space5,2 x 1,0 m Total height1,3 m Weight4200 kg Extra Specificationsapproximately 0,1 bar working pressure Technical specs Extra informationapproximately 0,1 bar working pressureStarchAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesDiscountDetergent & surf.Other pharmaceuticsCosmeticsFood additivesSugarLubricants & oleoAnimal ...

Mixer Manufacturer : AVA Huep GmbH & Co. KG Type: HTL 3 Power: 1.1 kW Content: 4 liters gross volume Technical specifications : Stainless steel mixers for powdery to paste-like products Dimensions Speed 15-400 rpm, rated speed 128 rpm Frequency-controlled Width approx. 512 mm Height approx. 701 mm without table Length approx. 1076 kg Weight approx. 200 kg Documents: available

Industrial Ethernet switch, network switch, LAN switch, rail switch -Manufacturer: Avantech, EKI Switch -Type: EKI-2525-AE -Outputs: 5 -Voltage: 12-48 VDC -Dimensions: 100/35/H150 mm -Weight: 0.6 kg

# Matsuura LUMEX Avance-25 (2015) – Hybrid-Fertigungsanlage mit DMLS und integrierter Fräsbearbeitung Die Matsuura LUMEX Avance-25 kombiniert additives DMLS-Verfahren mit subtraktiver Fräsbearbeitung in einem Prozessablauf. Sintern und Fräsen erfolgen ohne Umspannen, wodurch sich Funktionsflächen direkt nach dem Schichtaufbau bearbeiten lassen. Technische Daten: Baujahr 2015 Bauraum: ca. 250 × 250 × 180 mm Laserleistung: 40–400 Watt (variabel) Wellenlänge: 1070 nm (±5) Werkzeugplätze: 20 Max. Tischbelastung: 90 kg Betriebsstunden: 12.439 (Spindel), 3.476 (Laser) Materialspektrum: Martensitstahl 1.2709, Edelstahl 630, Edelstahl 316L, Kobalt-Chrom, Inconel 718, AlSi10Mg, Titan Ti6Al4V (mit Schutzgaszuführung). Weitere Pulver bei entsprechender Parametrierung möglich. Besonderheiten: Offenes System mit frei anpassbaren Bauparametern – geeignet für Forschung und Prozessentw ...

Airtraq Avant – Laryngoscope Video Laryngoscope for routine, difficult or emergency intubations. Manufacturer: Airtraq (Vygon) Model: Avant Guide Channel for Endotracheal Tube and High-Resolution Optical Channel Condition: Good, as is as shown in the photos Auction-ID: A1-51275-77

Tetra Pak tetra top fillers are a type of equipment used in the food and beverage industry for packaging products in Tetra Pak cartons. Here’s some more information about them:, - Purpose: Tetra top fillers are designed to efficiently fill cartons with liquid products, such as dairy, juice, and sauces, in a sterile environment, ensuring product safety and shelf life., - Technology: These fillers utilize advanced technology to maintain hygiene and optimize filling speed and efficiency. They often incorporate features such as easy cleaning and maintenance., - Carton Design: The tetra top cartons have a unique shape that provides good stackability and shelf stability. They often come with a separate opening mechanism, allowing for easy pouring., - Sustainability: Tetra Pak emphasizes sustainability in their products, utilizing renewable materials and ensuring that their packaging can be r ...

Tetra Pak tetra top fillers are a type of equipment used in the food and beverage industry for packaging products in Tetra Pak cartons. Here’s some more information about them:, - Purpose: Tetra top fillers are designed to efficiently fill cartons with liquid products, such as dairy, juice, and sauces, in a sterile environment, ensuring product safety and shelf life., - Technology: These fillers utilize advanced technology to maintain hygiene and optimize filling speed and efficiency. They often incorporate features such as easy cleaning and maintenance., - Carton Design: The tetra top cartons have a unique shape that provides good stackability and shelf stability. They often come with a separate opening mechanism, allowing for easy pouring., - Sustainability: Tetra Pak emphasizes sustainability in their products, utilizing renewable materials and ensuring that their packaging can be r ...

Equipped with Kubota D902 Stage V 3-cylinder diesel engine, engine power 16 kW / 22 hp, hydrostatic Avant Optidrive drive, 4WD, maximum travel speed 12 km/h, lifting capacity/tipping load 800 kg, maximum lifting height 2,790 mm, maximum breakout force 1,100 kg, auxiliary hydraulics 34 l/min at 185 bar, pulling force 900 kp, telescopic boom 600 mm, pallet forks, extendable boom. Auction-ID: A1-47395-700

BECKMAN COUTLER centrifuge model AVANTI JE THE LIST OF LOTS IS NOT DEFINITIVE, IMPORTANT LOTS WILL BE ADDED LATER, PLEASE CHECK THE ADDED LOTS. The sale includes only what appears in the photos. The buyer, by purchasing the equipment, agrees that the device must be used according to the standards and legislation in force in his country. The seller will not be held responsible in any way for misuse that does not comply with the safety conditions and the standards and legislation in force Please inspect. The sale includes only what appears in the photos. The buyer, by purchasing the equipment, agrees that the device must be used according to the standards and legislation in force in his country. The seller will not be held responsible in any way for misuse that does not comply with the safety conditions and the standards and legislation in force. Lots may be added to the list later.  ...

Altas Motoren im Austausch sofort ab Lager verfügbar. Motoren-Typen:BF4M1013E,BF4L1011T,BF4M1008(LDW1204T),F4M1008(=LDW1204) ,F3M1008(LDW903) BF4M2011,BF4M2012C/BF4-6M2013/C Hatz-Motoren:alle Typen ab Lager lieferbar:ES75/79/780/785/786/1D80/1D81 ansonsten schnelle und günstige Motor-Überholung mit 1 Jahr Garantie info@miw-zeven.de

good driving car Auction-ID: A1-47423-1002

Auction-ID: A3-46103-5646

Auction-ID: A3-46103-11885

Auction-ID: A3-46103-11510

Auction-ID: A3-46103-20711

Auction-ID: A1-51535-49

Vehicle in working order. See attachment for supplied option list. Description based on option report. RS ceramic brakes (Audi Ceramic), Audi exclusive Valcona leather upholstery with honeycomb stitching, Audi exclusive extended leather interior (dashboard and doors), Audi exclusive Alcantara black headliner with coloured stitching, Audi exclusive leather seat panels, Audi exclusive floor mats, Dynamics Pack Plus, RS sports suspension with variable damping (DRC), quattro all-wheel drive, RS sports exhaust system, carbon fibre/carbon optics package including air intake funnel with quattro lettering, 21 inch alloy RS wheels, Matrix LED headlights, black roof railing, black trims, panoramic roof, insulating/soundproof glass, Privacy Glass, Assistance Package including Audi pre sense plus, Adaptive Cruise Control with Stop & Go, 360° camera / Surround View, Night vision assistant, Audi Acti ...

good driving car engine 100% on new tyres Auction-ID: A1-47424-1021

The mileage and other data given are to be understood as non-binding guideline values. No guarantee is given for the accuracy of the information; This lot has not been tested for functionality. Parts may be damaged or missing. The seller does not guarantee traffic and operational safety; Auction-ID: A1-51191-27

Features: S-line package Front and rear parking sensors Fog lights Alloy wheels Keyless entrance Tinted rear windows Electrically adjustable windows and mirrors Steering wheel controls Infotainment system Partly leather upholstered Air conditioning Seat heating Electric tailgate Cruise control Mileage may increase by approximately 500 km. Auction-ID: A1-47424-104

Item 81: 1 Mackie tape extruder– diameter 65 mm – auto screen changer – die 650 mm - fibrilator, 2 sets of godets –L 1000mm x dia 190 mm + 2 ovens each 2500 mm, Item 84: 1 Barmag parts: – waterbath width1300 mm – die 1300 mm Waste cutter – mixer, Item 85B 160 Starlinger winders – traverse 200 mm – for circular looms., Item 85C 100 SAHM 260 e winders, traverse 400 mm x core 90 mm, Item 85: 1 Starlinger Starex tape extrusion line – die 1100 mm, Item 97: 1 x 90 mm – extruder Dolci, Item 98: several vacuum hopper loader, make Labotek, Item 102Y 1 Presto Horizontal automatic baling press – Year 2008 - as new, Ref. No. 103: 4 Barmag extruders 35 mm, Ref. No. 104: 1 Plasticizers extruder 45 mm, Ref.No. 104A: 1 Barmag extruder 50 mm Type 6E4 with panel, Ref. No. 105: 1 Plasticisers extruder 20 mm, Ref.No 105A: 1 x 45 mm Cincinatti extruder almost new, verey little used.,  ...

cutting range for steel to: 35.0 TS mm cutting range for steel to: 25.0 QS mm ampere: 20 - 65 Ampere cutting medium: Druckluft voltage: 400 V output: Eingang 7.8 KW weight: 51.5 kg range L-W-H: 595 x 250 x 890 mm Avalon 65 AIR with integrated compressor Cutting - clean and reliable The air plasma cutting system Avalon 65 AIR with integrated Compressor is your reliable partner for the demanding Mission. Make separation cuts up to one with the Avalon 65 Air Material thickness of 18 mm. Characteristics : - IGBT technology - with integrated compressor - Microprocessor control system for excellent and dynamic . Arc properties - CNC interface - HF-free arc starting system for increased reliability . and low EMF exposure - Manual switch to activate airflow around test air pressure . without having to trigger the burner - Intelligent protection function protects the plasma torch . from damage su ...

Spinner for Agfa Avantra 44S ,20,000 RPM, refurbihed 2013, with warranty. We have all Spareparts for Agfa Avantra 25/30/44, AccuSet.. on stock. Don't hasitate to contact us.

<br>Spinner for Agfa Avantra 44s, 20,000 RPM, refurbihed 2013, with warranty. We have all spareparts for Agfa Avantra 25/30/44, AccuSet... on stock. Don't hasitate to contact US.<br><br><br>

A CMS CNC woodworking center is available. Axes: 5, travel X/Y/Z: 3500mm/2200mm/300mm, spindle power: 15kW, speed: 24000rpm, tool holder: HSK-F63, tool places: 20, table type: matrix vacuum table, control: Osai S10. The system control was modernized in 2006. Documentation available. On-site inspection is possible.

Complete system installed in 1997 - still in production - Avantra 44S with 3600 dpi - Online Rapiline for Avantra44 - Collecting basket, cable, everything with The whole system was under maintenance contract, is complete tested and cleaned Available: in production

<br>Spinner for Agfa Avantra 44 s - Clompete general&2011 with warranty<br><br>Verf Gbar: now

<br>Conditions for Agfa Avantra 44 - See image<br><br><br>Verf Gbar: now

control panel for Avantra25 - all details can be seen on the picture. The panel is tested and comes from a functional Avantra25. Available on stock

cassette for Avantra25 - all the details can be seen on the picture. The cassette is tested and comes from a functional Avantra25. Available on stock

input cartridge for Avantra25 - all details can be seen on the picture. The cassette is tested and comes from a functional Avantra25. Available on stock

drive motor for Avantra25 - all details can be seen on the picture. The engine is tested and comes from a functional Avantra25. Available on stock

Complete laser and focus module for Avantra25 - all details can be seen on the picture. The unit is tested and comes from a functional Avantra25. Available on stock

Complete ventilation unit for Avantra25 - all details can be seen on the picture. The unit is tested and comes from a functional Avantra25. Available on stock

engine for Avantra25 - all the details can be seen on the picture. The engine is tested and comes from a functional Avantra25. Available on stock

engine for Avantra25 - all the details can be seen on the picture. The engine is tested and comes from a functional Avantra25. Available on stock

<br>Complete system - still in production -Avantra 44 with 3600 dpi -AgfaLine 44 - short online processor -Agfa PDF-Rip -Agfa PrintDrive Series 3<br><br><br>Verf Gbar: after 10.07.2011

<br>AGFA Avantra 30 with short developers in excellent condition. Total size: 1200, 1800, 2400 and 3600 dpi - max. screen: 75.4 x 63.5 cm.<br><br>Verf Gbar: now

Spinner for Agfa Avantra 30 ,30,000 RPM, refrushed 2012, with waranty. We have all Spareparts for Agfa Avantra 25/30/44, AccuSet.. on stock. Don't hasitate to contact us. Available: Yes

Spinner for Agfa Avantra 25,20,000 RPM, refrushed 2011, with waranty. We have all Spareparts for Agfa Avantra 25/30/44, AccuSet.. on stock. Don't hasitate to contact us. Available: Yes

Spinner für Agfa Avantra 30 ,30.000 RPM, refrushed 2012, with waranty. We have all Spareparts for Agfa Avantra 25/30/44, AccuSet.. on stock. Don`t hasitate to contact us. Available: Ja

Spinner für Agfa Avantra 30 ,30.000 RPM, refrushed 2012, with waranty. We have all Spareparts for Agfa Avantra 25/30/44, AccuSet.. on stock. Don`t hasitate to contact us. Available: Ja

AGFA Avantra 30 with short Developer in great condition. Resolution: 1200, 1800, 2400 and 3600 dpi - max. image area: 75,4 x 63,5 cm. Available: now