129,238 used machines on RESALE, but how to find them? Machine Search
automatic storage CASSIOLI.
Throughput depending on material type, speed, and cutting set Capacity: up to 2.500 kg/h Main motor power: 10 KW / 15 KW Power supply: 380 V, 50 Hz Dimensions of the machine in cm: Width: 110 Lenght: 90 Height: 125 Delivery time: 5 working days after advanced payment
Used bread press FORTUNA, automatic size 4 -Refurbished- - Fully automatic bread roll press - 30 troughs per plate - Weight range: 40 - 110g - for 3.300g dough total - incl. new stainless steel knives - automatic head - with effective cut-off (only cutting - no rounding) - Condition: very good, ready for immediate use - 6 months warranty - Video on request The machine has been completely overhauled and is in very good condition. A visit is of course possible by arrangement.
ERIKA RECORD dough dividing and warp knitting machine Automat Type 4 - used, refurbished in 2023 - Type 4, 30 pieces, working range 40 - 120 g removable plastic dough enclosing ring Piston with non-stick coating Swivel machine head for easy cleaning Dividing knife electrolyt-plated four active times and active time switch-off (parts/presses only) no oil in the working area of the machine Machine with heavy casting stand for vibration-free operation Long-lasting, low-wear drive complete with three plastic knitted plates
ERIKA RECORD dough dividing and warp knitting machine semi-automatic type 4 - exhibition machine, brand-new condition, year of manufacture: 2025 - Type 4, 30 pieces, working range 40 - 120 g removable plastic dough embracing ring dough piston with non-stick coating tiltable machine head for easy cleaning dividing knife electrolyt-plated no oil in the working area of the machine machine with heavy casting stand for vibration-free operation complete with three plastic moulding plates
Completely made of special stainless steel Working worm and feeding worm Holeplate diameter: 160 mm Hopper capacity approx. 360 liters Cutting set consisting of: 2 knives, 1 kidney plate, plates with hole diametrs 4 and 13 mm Machine dimensions in cm: Width: 125,0 Depth: 230,0 Height: 210,0 Installed power: 37,5 kW Voltage: 400 V, 50 Hz
Ich habe eine gebrauchte - halbautomatische Donutform zu verkaufen. Preis 1950 Euro leicht verhandelbar.
AUTOMATIC COLOUR INKING MIXING KITCHEN 31 colors; for TEXTILE INDUSTRY : MAKE : TERMOCOLOR TYPE : ROT YOC : 2003 , refurbished 2012 VALVES : 6 THICKENER & 31 COLOUR, NO. OF VESSELS : 6 COMPUTERISED COLOUR DISPENSING SYSTEM & WEIGHING WITH DRUM TRANSPORTATION & STORAGE
Dough dividing and rounding machine Roll Press Record Semi-automatic 36-piece Parting head NEWLY revised Stainless Steel Knife NEW Dough insert up to 2100g, pieces from 20 to 70 g Output approx. 3600 pieces/hour with 3 new knitting plates E-system new DGUV V3 tested Connection 400V, 1 kW, 16A-CEE plug Dimensions: 520 x 500 x 1200 mm, WxDxH Used machine overhauled with 6 months warranty + spare parts service Option: Cast Plate Stainless steel platform Maintenance contract Service Package E-Box Many more TOP dough dividers in stock!
Inv. Num. : 7839 Type: SK 180MP/4 Produzent: AUTOMATICE Erzeugt: 2016 Parametern: Trichterlänge: 1200 mm Trichterbreite: 840 mm Motor: 18.5 kW Gesamthöhe: 3192 mm Länge: 2730 mm Breite: 1752 mm Ofengewicht: 3100 kg
Throughput depending on material type, speed, and cutting set Capacity: up to 4.000 kg/h Main motor power: 10KW / 15 KW Power supply: 380 V, 50 Hz Dimensions of the machine in cm: Width: 110 Lenght: 90 Height: 115
Key data: 4300 mm, 2200 mm
EXHIBITION MACHINE Cutting height 2200 x cutting length 4300 mm, cutting depth 80 mm Motor power: 5.5 kW Automatic saw feed for vertical and horizontal cut, infinitely variable from 6-25 m/min. incl. the following accessories: - Suction CE - Pneumatic aluminium sliding shelf - Medium workpiece support - Longitudinal fence with digital dimension display - Stripe stop - Digital dimension display for horizontal cutting on the control panel - 3 adjustable anchorage points in the saw bar - SuperCut scoring device incl. 2 WPL knives - Narrow parts line (2 pieces)
Powder coating plant Complete line for automatic powder coating The line was operated by us until the end of February and until then it was functional and as required has coated 1 or 2 coats. The complete line includes the following elements: 3 zone spray washing system (DEGREASING): Manufacturer OMT Otto Müller GmbH, Fellbach Year of construction 1997 The pretreatment tunnel is a unit of the painting line, where the surface treatment of the parts is carried out by spraying with chemical solutions. solutions. Its purpose is to degrease and clean the surface of the parts. Dimensions approx: - Length 13.000 mm - width 230 mm - Height 3950 mm (tunnel and fan in total) Dimensions of workpieces: - Length 1,200 mm - width 300 mm - height 600 mm AUTOMATIC SPRAY BOOTH: Company ESB Vöhringer GmbH (now Wagner GmbH) Series: IC-3 Type: A2M 8000 year of construction 1989 Ext ...
used
We are offering for sale an Automatic Powder Coating Line with full encapsulation of the production process manufactured by Ecoline. Elements included in the line: - Surface preparation tunnel - Drying oven - Cooling tunnel after drying - Manual cabin for short series - Dielectric automatic cabin for quick color change - GEMA applications - Cleanroom to maintain constant operating parameters throughout the year (temperature and humidity) - Polymerization oven - Cooling tunnel after firing - Automatic mono rotary conveyor Additional Information: - 3-zone tunnel entirely made of stainless steel. The first section is heated by an external exchanger and equipped with a coalescing oil separator and bag filtration. Additional equipment includes an automatic chemical dosing system from Endress Hauser. - Drying oven with very good insulation with air curtains and hoods at the exit with temp ...
Hydra EN854 R6 SAE 100R6 DN19 3/4" WP21 bar psi Made in Europe
Unused, complete automatic filling system with heating tank and conveyor belt. manufacture Danish Candle Machinery. Intended for wax-based candle production, but can be used for many other types of filling work. Everything made to order in 2021 in Denmark. Supplied with instructions and EU declaration of conformity. Filling system for filling five units at a time • 1 x 6 kW / 3 x 400 v • Pump, pump bracket, hose • The nozzles are replaceable and come in sizes ø2, ø4 and ø6 mm Heating tank 2000 liters • Heating element: 1 x 9 kW / 3 x 400 v / 30 - 110 ° C • Dimensions: 220 x 120 x 134 cm • Inner and outer tank in stainless steel • Insulation cover in galvanized steel • Lid in aluminum Conveyor • Motor-driven and sensor-controlled • Dimensions: 5 x 0.5 m Find more here - /
ID3532 FC Maschinenbau-Schlüsselbauer-Schindler year/Baujahr 1995/2010 Fully automatic stone finishing system (edge aging, bush hammering, impregnation) Fully automatic stone finishing system for the artificial processing of concrete block surfaces and edges, as well as for impregnation. The special feature of this system is that, unlike conventional processes, only the edges can be aged. Furthermore, the system also allows bush hammering of the stone surface. Fully automatic brick finishing system (stone edge aging, stick planting, impregnation) Fully automatic stone cutting system for the artificial processing of concrete block surfaces and edges as well as impregnation. The special feature of the system is that, in contrast to conventional processes, only the edges can be aged. In addition, the system also allows the stone surface to be hammered. More details and price ...
Description Straight Belt Belt Type: Smooth Belt Length: 1500 mm Useful Belt Width: 210 mm Minimum Belt Height: 600 mm Maximum Belt Height: 700 mm Power Supply: 400 V NEW BELT
Description Straight Belt Belt Type: Smooth Belt Length: 1500 mm Useful Belt Width: 210 mm Minimum Belt Height: 600 mm Maximum Belt Height: 700 mm Power Supply: 400 V NEW BELT
Description Straight Belt Belt Type: Smooth Belt Length: 1500 mm Useful Belt Width: 210 mm Minimum Belt Height: 600 mm Maximum Belt Height: 700 mm Power Supply: 400 V NEW BELT.
Description Straight Belt Belt Type: Smooth Belt Length: 1500 mm Useful Belt Width: 210 mm Minimum Belt Height: 600 mm Maximum Belt Height: 700 mm Power Supply: 400 V NEW BELT
Description Straight Belt Belt Type: Smooth Belt Length: 1500 mm Useful Belt Width: 210 mm Minimum Belt Height: 600 mm Maximum Belt Height: 700 mm Power Supply: 400 V NEW BELT
STOCK Laminating machine, Max. sheet size. 1420x1620mm, Min. sheet size: 500 x 500 mm, · with MIRUS sheet feeder, type HSII, · Suction belt carrier sheet feeder, type 4R, · Press belt, type 5, · Package turner (forks) with non-stop device, type 8, · Stacker with non-stop roller carpet, type 7, Technical specifications:, Working width: 1500 mm, Max. sheet width: 1420 mm, Max. arc length: 1640 mm, Lamination tolerances: +/- 1.5 mm, Material thickness:, - Carrier material from 0.6 - 7 mm. Single-sided corrugated cardboard only runs through the machine with a standing wave., - For cardboard of approx. 400 – 500 g/m² an additional needle bar is required., - Cover sheet of approx. 180 – 400 g/m². Deviations possible depending on material properties.
Lumacon automatic crate filling line, Automatically feeding of 4 crates/ boxes per cycle., When the weight has been reached the conveyor belts will remove the filled crates and prepare 4 empty crates for filling., - Complete with inclined conveyor belts, - Buffer belts, - Weighing belts, - Multiple lines available from stock (Emmeloord)
Key data: 46 °, 3 mm, 1 mm
MARTIN T74 Automatic sliding table saw with 4-axis CNC control -Paratable integrated as 5th axis in the control and 3-axis scoring Mark: MARTIN Type: T74 AUTOMATIC - Radio Control Year of Make: 2008 M-No.: V484794 Table dimensions: 1,350 x 1500 mm. with table extension 600400 mm with tool storage Table height: 900mm Edging table: 3,300mm Main saw: 5.5 kW Saw blade shaft: ø 30 mm. with two drive pins 10 mm Saw blade change: "ProLock" quick-change system Saw blades: Ø 250 - 500 mm; up to Ø400 mm retractable under table; up to Ø400 mm can be combined with scoring Cutting height: CNC control up to max. 170 mm. (saw blade 500 mm) Saw blade swivel: CNC control 0 - 46° Cutting width: CNC control 1,350 mm Scoring machine: 3-axis controlled scoring machine Rip Fence: CNC Control Rip Fence; End position can be lowered automatically below table level Parallelogramtic: ...
MAWEG frame press with automatic adjustment of height and width Press size 4.50 m.x 2.60 m. Frame Press Size: 5.30 x 3.40 x 1.30 m.
Key data: 5300 mm, 2200 mm
Striebig Automatic 6220AV Panel Saw Brand: Striebig Type: Automatic 6220AV Year of Make: 1985 M-No.: 14118 Max. cutting height: 2,100 mm Max. cutting length: 5,300 mm Max. cutting depth: 80 mm Saw blade diameter: 300 mm Saw blade bore: 30 mm Motor power: 4.4/5.5 KW Saw blade speed: 4,750 rpm Bottom support: Rollers Small parts edition: Yes Measuring system: analog Swivel saw unit: manual Saw feed: manual Mounting: freestanding with rear stand Extraction: ø100 mm Saw bar locking: manual Dimensions: 6.5 x 2.5 x 1.3 m
An automatic flat glass sand blasting system MHG is available. Blasting height: 1500mm, max. glass thickness: 70mm, blasting capacity: 30m²/h, air consumption per nozzle at 4bar: 800l/min. Machine dimensions X/Y/Z: approx. 6200mm/2500mm/3000mm, control: Siemens PLC. An on-site inspection is possible.
Clamp length: - mm Clamp width: - mm 0: - Nm Glass bead nailer 2 P Jumbo automatic E.C. - new - Your advantages: - The corner connections are closed - No open glazing bead joints - There are no color differences when painting - The glazing bead frames are easy to assign Clamp corner joining machine 2P Jumbo Automatic E.C. for clamping glazing bead frames. Choice between automatic and manual operation, With angle system, clamping device from above and front Pressure can be regulated separately. Inserting parallel and superimposed ones Clamps possible via electronic programming control. Stapler can be mounted on a suitable work table, Operation via foot valve. -------------------------------------- Price in this version on request! Plus packaging/shipping Additional prices: --------------------- Movable work table height adjustable from 700 - 1000 mm, 2 pieces of support bars can be plugg ...
It is a used, reconditioned Fortuna bun press fully automatic for sale. The machine head can be swivelled electrically and switched off with active movement. Weight range of the machine is 40gr. - 110gr. per piece of dough (30 pieces). Incl. 3 x plates (more plates on request). Price on request.
It comes with 3 capsule size format sets 0 / 2 / 4 The machine originates from a prominent pharmaceutical & cosmetic production site in Europe and it is in excellent overall condition - well looked after and serviced on regular basis. Automatic, intermittent motion used capsule filler in Pharma grade Stainless Steel. Working Description: Suitable for small to medium production runs, with mechanical output up to 40,000 capsules per hour: For filling powders, pellets and tablets (incl. various possible combinations between powder, micro tablet and pellets). The dosing / filling stations (dosators) are vacuum assisted, which increases the filling accuracy, allows for handling powders with difficult flow characteristics and - improves compaction of powder • CE marked. • Capability to fill a wide range of powders. • ...
An automatic single-head underfloor saw Emmegi including a chip extraction system is available. Cutting angle: 90°, feed travel: 0mm-1000mm, positioning accuracy: +/-0.5mm, saw blade diameter: 500mm, motor power: 6.6kW, weight: approx. 1000kg. An on-site inspection is possible.
Manufacturer: Joysonquin Ningbo Model: Tesla Model Y Clip Machine Year of Manufacture: 2023 Type of Machine : Electrical Specifications: - Voltage: 3x400V AC / N / PE - Frequency: 50Hz - Power: 15 kVA - FLC (Full Load Current): 40A Air Requirements: - Pressure: 6 bar - Consumption: 800 L/min Weight: 2500 kg Remarks: Machine equipped with two KUKA robots: KR 10 R1100-2, One partially disassembled for spare parts Find more here - / Contact us at -
<br>SOS block bottom bag machine TRIUMPH III, Windm Ller + H Lscher, with lower patch unit, 2-ply, photocell, several former plates and aisle, option: 4-color printer for final cleaning<br><br>br>
SOS Block bottom bag machine TRIUMPH III, Windm�ller + H�lscher, with bottom patch unit, 2 plies, photo cell, several former plates and gears, option: 4 colour tail end printer
Koppens breading machine Belt width: 600mm Power: 0.12 kW
The injection blow molding machine VICTOR MACHINERY MSZ 30 for the production of bottles was built in 2015. Technical parameters : - screw diameter: 40 mm - screw L / D: 22: 1 - injection weight (HDPE): 190 g - maximum speed of the screw: 10-225 rpm. - heating power: 8.3 kW - injection clamping force: 292 kN - blow clamping force: 46.7 kN - maximum plate size (L x W): 400 × 270 mm - minimum mold thickness (H): 180 mm - mold heating capacity: 3 kW - opening: 220 mm - drying cycle: 3.5 sec. - engine power: 15 kW - hydraulic pressure: 15 MPa - suitable bottle range: 3-800 ml - maximum bottle height: ≤190 mm - maximum bottle diameter: ≤100 mm - minimum air pressure: 1MPa - compressed air discharge rate: ≥0.7 M3 / mm - water flow: 3 M3 / h - total rated power with mold heating: 26.3 kW - dimensions (L x W x H): 3.26 x 1.2 x 2.2 m - net weight: 4 tons
3D CNC Router T-Rex 1215 / Technical Data : Equipment / product data CNC-milling machine type High-Z/TRex series: Drive: 3 brushless brand stepping engines with 4,5 ampere. Possibility of sliding through long and up to 120mm high materials, no belt drive at the ende of the X axis! Linear guide on all exis by HIWIN / THK ! Multiple ball-bearing ball-screw spindle on all axes, proprietary brand! Rapid traverse max. ca. 12.000 mm/min Operating speed max. ca. 8.000 mm/min Technical definition X/Y : 0,005mm (1/10 Schritt); Z: 0,0025mm Backlash maximal ca. +/- 10µm (0,010 mm) Repeat accuracy: ca. 0,01 mm Clampin surface of grooven panel / T-slot table 1860 x 1340 mm Travels: X=1500mm; Y=1200mm; Z= 130 mm Non-contact reed sensors / reference switches / limit switches on all axes Double secured emergency-stop button Energy chains for a clean cable routing Total dimensions wi ...
Type R-RP630 Working width 630 mm Min. working length 500 mm Working thickness 3-110 mm Feeding speed 6-30/min Total motor power 20,25 kW Motor for first unit 11 kW Motor for second unit 7,5 kW Feeding motor 1,5 kW Lifting motor 0,25 kW Diameter of first roller 190 mm Diameter of second 190 mm Abrasive belt size 650x1920 mm Working air pressure 0,6mpa Volume of dust collection device 8000 m3/h Transport dimensions 1900x1200x2100mm Weight 1200kg
Type R-RP1300 Working width 1300 mm Min. working length 500 mm Working thickness 3-110 mm Feeding speed 6-30/min Total motor power 30,37 kW Motor for first unit 15 kW Motor for second unit 11 kW Feeding motor 4 kW Lifting motor 0,37 kW Diameter of first roller 240 mm Diameter of second 210 mm Abrasive belt size 1330x2200 mm Working air pressure 0,6mpa Volume of dust collection device 9600 m3/h Transport dimensions 2700x2100x2100mm Weight 3300kg
Type SE-360D Thickness of panel 10-60 mm Edging thickness 0,3-3 mm Feeding speed 13-22 m/min Air pressure 0,6 MPa Voltage 380V/50Hz Total install power 10,5 kW Min. panel dimensions 150(L)x150(W) mm Made in 2017 y. Transport dimensions 4420x900x1560 mm Weight 1400 kg
Automatic labeling machine designed for automatic sticking of self-adhesive labels on cylindrical packages (bottles, jars, cans, etc.) and on packages with rectangular cross-section. After equipping the machine with a packaging orientator, it is also possible to label packaging with irregular cross-section (oval, lenticular, etc.) A single label is stuck on cylindrical packages, while flattened packages can be covered with two labels at the same time. The labeller can work independently or cooperate with other devices in the technological line. It is possible to apply alphanumeric characters to the labels by hot printing through the marking foil. Efficiency: depends on the size of the package and label, up to 3000 pcs / h Max packaging dimensions: length - 80 mm, height - 300 mm Maximum dimensions of labels: length - limited by the size of the package, height - 165 mm ...
Type SK-1000-P4 Working width 1000 mm Min.working length 400 mm Working thickness 2-80mm Polishing roller speed - Frequency control Feeding speed 5-20m/min Total motor power 8.14kW Disc motor 1.5kW1 Disc swing motor 0.37kW 1 Screw roller motor 2.2kW 2 Feeding power 1.5kW Working table up and down 0.37kW Transport dimensions 2700x1700x1600mm Weight 2300kg
Type SK-1000-P6 Working width 1000 mm Min.working length 500 mm Working thickness 2-150mm Polishing roller speed - Frequency control Feeding speed 3-12,5 m/min Total motor power 13.87 kW Disc motor 1.5 kW1 Cross motor 1.5 kW 1 Screw roller motor 2.2 kW 2 Feeding power 2.2 kW Up and down motor 0.37kW4 Swing motor 0.37kW 2 Working table up and down 0.55 kW Transport dimensions 3650x1850x2100mm Weight 4200 kg
Type R-RP1000 Working width 1000 mm Min. working length 500 mm Working thickness 3-110 mm Feeding speed 6-30/min Total motor power 20,25 kW Motor for first unit 11 kW Motor for second unit 7,5 kW Feeding motor 1,5 kW Lifting motor 0,25 kW Diameter of first roller (steel) 190 mm Diameter of second (ruber) 190 mm Abrasive belt size 1020x2000 mm Working air pressure 0,6mpa Volume of dust collection device 8000 m3/h Transport dimensions 1900x1600x2100mm Weight 2200kg
Type SK1300-P6 Working width 1300 mm Min.working length 370 mm Working thickness 5-140mm Polishing roller speed - Frequency control Feeding speed 2.5-12,5 m/min Total motor power 16.87 kW
maximum number of results exceeded
please refine your search
