134,955 used machines on RESALE, but how to find them? Machine Search
Manufacturer: Boschert Year of Manufacture: 2014 Model: Compact 1000 Rotation Type of Machine: CNC punching machine with rotating head TECHNICAL SPECIFICATIONS - Punching force: 28 t (280 kN) - Tool system: Trumpf tool system, sizes 1 to 3, up to diameter 105 mm - Rotating head: all tools infinitely rotatable 360 degrees - Control unit: Boschert CNC 32050 control unit with TFT control panel - Working area: 1060 x 2080 mm - Sheet thickness capacity: up to 6 mm steel - Power supply: 3 x 400 V / 50 Hz - Connection load: 18 kVA - Control voltage: 24 VDC - Required fuse protection: 3 x 20 A METER READINGS (FROM CONTROL UNIT) - Machine on: 5,722 hours - Hydraulics on: 1,285 hours - Stroke counter: 2.3 million strokes Regarding the dimensions: The machine’s key technical specifications are as follows: working area 1,060 × 2,080 mm, punching force 28 t (280 kN), Boschert CNC 32050 con ...
Manufacturer: Amada Year of Manufacture: 2007 Model: EMK3610NT Type of machine: Punching machine, including MP300 loading unit, tooling and Wilson X-Sharp grinding machine Capacity: 300 kN punching force Number of tool turret stations: 58 Power required: 27 kVA Noise level: 91 dB(A) Stopping distance: 360 mm Weight: 24,500 kg Transformer model: Marx TG 214 Transformer rated output: 30 kVA Transformer primary rated voltage: 3 x 400 V (plus or minus 10 percent) Transformer secondary rated voltage: 3 x 200 V Transformer primary rated current: 44 A Transformer secondary rated current: 87 A Transformer frequency: 50/60 Hz (plus or minus 1 Hz) Transformer supply fusing: 400 V / 27 kVA / 63 A Transformer insulation class: T 40 F Transformer protection rating: IP 23 Transformer dimensions (L x B x H): 740 x 550 x 680 mm Transformer gross weight with packaging: approximately ...
Two small punching machines for crimping binding spines are available. 1) Swigraph E420C punching and wire closing machine, max. working width: 430mm, binding element diameter range: 4.7mm-31.75mm. 2) Two-piece Ibico EP28/HB28 plastic comb binding system, punching width: 420mm, max. punching capacity: approx. 35/min, max. binding capacity: 500 sheets, machine dimensions X/Y/Z: approx. 550mm/450mm/600mm, weight: approx. 65kg. Documentation available. An on-site inspection is possible.
serial number: 28043 weight: 3 t pressure: 30 t volt: 380 V frequency: 50 Hz The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 100 t no. of strokes: 30-70 Hub/min Max ram stroke: 130 mm ram adjustment: 100 mm table surface area: 950x630 mm ram surface: 630x600 mm throat: 340 mm dayligth: 480 mm coil: GSW total power requirement: kW weight of the machine ca.: 8,9 t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS ...
A Trumpf CNC punching machine is offered. Max. punching force: 180kN, working range X/Y: 2500mm/1250mm, max. sheet thickness: 6.4mm, max. workpiece weight: 160kg, max. punching diameter: 76.2mm, axis speed: approx. 100m/s, max. punching stroke rate: approx. 1000 strokes/min, max. marking stroke rate: approx. 2500 strokes/min, tool magazine: 18, clamps: 2, max. part size X/Y: 500mm/500mm, operating hours: 22146h. Including tool cassettes, various punches and dies, a MultiTool, and Easy Type. Weight: approx. 9.8t, machine dimensions X/Y/Z: approx. 6500mm/6203mm/2252mm. Documentation available. An on-site inspection is possible.
Machine number: 20519 Operating voltage: 400 V Frequency: 50 Hz Connection: 3 kVA Operating pressure: 6 bar Table dimensions: 1350 x 700 mm Reference: Steinbach & Holler - Lot 40 Auction-ID: A7-49056-132
Key data: 280 kN, 6 mm, 2080 mm
Boschert Compact 1000 Rotation – CNC punching/nibbling machine for sheet metal working, year of manufacture 2014, serial no. 379. Technical key data: - Punching force: 28 t (280 kN) - Trumpf tool system, sizes 1–3, up to Ø 105 mm - Rotating head: all tools can be rotated continuously 360° - Control: Boschert CNC 32050 with TFT control panel and DXF import - Working range: 1,060 × 2,080 mm, repositioning for long sheets - Sheet thickness: up to 6 mm steel - Integrated CNC thread cutter Meter readings directly from the controller: - Machine on: 5,722 h - Hydraulics on: only 1,285 h - approx. 2.3 million strokes Last checked March 2026. Little run, technically very good condition. The short hydraulic running time makes the machine an attractive alternative to the cost-intensive purchase of a new one. Extensive, complete tool inventory including: large toolbox wi ...
Complete with accessories Auction-ID: A7-49136-3
Manufacturer: Trumpf Model: Trumatic 260 Rotation Year: 1991 Condition: Used Stock number: 9376 Compressive force: 25 t Maximum length of sheet metal plate: 2500 mm Maximum blade width: 1000 mm Maximum sheet metal plate weight: 150 kg Punching diameter: 38 mm Machine height: 1820 mm Machine length: 3800 mm Machine width: 600 mm Machine weight: 4300 kg Equipment: PC Spare parts 2x tin transport trolleys
HEIDELBERG GT -Max paper size 32X46 cms. -Inking unit with rollers -Frame, plate and all tools -Available immediately in our warehouse
Hermerding Type PPD/60/60 Compressive force 60 ton Lifting height 10-80 mm Installation height approx. 450 mm Table 600 mm x 500 mm Stroke rate approx50 -1/min
On and including work table lxbxh 170x90x85 Auction-ID: A1-48474-22
Equipped with foot control, on and including work table lxbxh 255x115x85cm Auction-ID: A1-48474-19
Equipped with foot control, on and including work table lxbxh 2450x1600x880 mm, including contents. Auction-ID: A1-48474-45
On and including table 50x50x90cm. Auction-ID: A1-48474-156
On and including work table lxbxh 200x70x85cm, including 1x Meulemans type 10 punch on and including work table lxbxh 150x70x85cm Auction-ID: A1-48474-20
On and including work table lxbxh 150x70x90cm Auction-ID: A1-48474-21
Max. pressing force: 400kN, stroke rate: 100-1200/min, connected load: 18kW, compressed air connection: R 1/2inch, 6-10bar, adjustable strokes: 13, 15, 19, 25, 32, 38, 44, 51, 57mm, max. fixed stroke (special version): 57mm, ram height adjustment: 60mm, tool installation height: 4 Mm 677, max. width of tool installation opening: 690mm, max. strip passage width: 190mm, strip feed height above clamping plate: 60-140mm, bed opening: 640x220mm, lower clamping plate: 4 Mm 671, upper clamping plate: 4 Mm 672, installation dimensions: 4 Mm 667, length: 1695mm, width: 2185mm, height: 3010mm, weight with feed unit: 6.37t. Equipment: drive control, tool clamping plate, installation dimensions, upper clamping plate, hand protection device, BBV 41.202/150 strip feed unit, strip-end monitoring, transport and lifting device, complete documentation, installation, operating and maintenance instructions ...
press capacity: 28 t x-axis: 2000 mm y-axis: 1000 mm machine weight ab.: 11000 kg Youtube-Video-Links: https://www.youtube.com/watch?v=LdcmUuj8QnM&ab_channel=BaestleinGmbH https://www.youtube.com/watch?v=IcEmqxjpnoE&ab_channel=BaestleinGmbH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 2000 mm plate length: 1000 mm Punching capacity: 28 to weight of the machine ca.: 11.000 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 1015 mm plate length: 1015 mm plate thickness: 6,0 mm Punching capacity: 25 t punch diameter: 88,9 mm total power requirement: 16 kW weight of the machine ca.: 12000 kg dimensions of the machine ca.: 4000 x 2320 x 2300 mm Equipment: - Tool changer with 20 positions - FANUC Series O-P control - Foot pedal - Operating instructions (English) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: gebraucht : 2001 : 9647 : prompt, Zwischenverkauf v : Italien : 24400 € : 1 : 30 to : 1250+N x 1000 mm : 1250 mm : 1000 mm : 40 m/Min : 30 m/Min : 50 m/Min : 30 mm : 730 1/Min : 300 1/Min : 980 mm : 4 kW : 115 l : 4000 mm : 2780 mm : 1900 mm : 4000 x 2300 x 1900 mm + Z mm : 4800 kg With 6-way multitool holder MTE6 (max. Dm. 24 mm) 2 Clamping claws Table with Brushes, table dimension 1970 x 2260 mm Foot pedal 2 pcs. additional single matrix holders PC with Euromac Software Eurowin 8.36 Max. Punching force 300 kN Automatic repositioning up to 10.000 mm Max. Punching diameter for single tool 88,9 mm, Max. Punching diameter Multitool Holder MTE6 Dm. 24 mm Max. Opening the clamping claws 7 mm Transport width: 2350 mm User Manual in english and italian CE declaration available WITH LARGE TOOL PACKAGE several pieces of each of the following dimensions: Round: Dm. 2,5/2,8/3/3,12/3,2/3,5/3,9/ ...
: neu : 2026 : 090237 : prompt, Zwischenverkauf v : Polen : 7950 € : 153.44 € : 1 : 47 to : 110 mm : 27 mm : 25x18 mm : 8 s : 16 mm : 700 bar : 479 mm : 135 mm : 388 mm : 117 kg MOBILE HYDRAULICS-POWERSTATION Double action - fully automated process of punching and return Wide range of hole diameters up to 27mm Intelligent control system with inching and automatic load detection Mode indicator light Protection against accidental start-up OPTIONAL: Gantry punching station for increased productivity and operation comfort € 710,- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 8 Wochen ab Auftragse : Spanien : 11500 € : 220.8 € : 1 : 55 to : 500 mm : 40 x 10 mm : 37 1/min : 5 kW : 1550 mm : 1200 mm : 1950 mm : 1150 kg hydraulic drive table with gauge user manual in GERMAN and ENGLISH CNC options on request We have a big stock of punches and dies for immediate dispatch WE HAVE MORE THAN 700 REFERENCES! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
throat: 1100 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 2 mm
Machine Type: Force Former Manufacturer: Eckold Type: KF324 Year of Make: 2010 Condition: used / very good, is still on the delivery pallet and was used for less than 10 hours Offer will only be sent if a complete imprint is provided! Price VB Location Warstein , Germany Reference number M-ECK-0826 DESCRIPTION We offer you a force former from the manufacturer Eckold including 3 tool sets Sheet steel: Up to 2.0 mm thickness Aluminum: Up to 2.5mm thickness RVS (stainless steel): Up to 1.5 mm thickness Projection: 340 mm horizontally and 245 mm vertically Strokes: Approx. 400 strokes per minute Weight 505kg Tools FWA60S FWR60S PFW80S Availability: immediately Our offer is aimed at tradespeople who are registered in the sense of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide ...
For sale is a high-performance DIMECO LINAPUNCH MC-F CNC coil punching line for automated processing of strip material directly from the coil. The system is particularly suitable for the cost-effective production of perforated sheets, mounting plates, mounting rails, ventilation components and customer-specific stamped parts in medium and large quantities. Direct processing from the coil significantly reduces material consumption, set-up times and unit costs. LINAPUNCH technology combines the flexibility of a CNC punching machine with the productivity of a continuous coil line. The system works with standardized thick-turret tools and enables highly productive production processes. Technical data Manufacturer: DIMECO Type: LINAPUNCH MC-F Machine Type: CNC Coil Punching Machine/Punching Line Control: CNC, Siemens Simostar 370 Coil Processing Coil inner Ø: 508/610 mm Coil out ...
Impressions=0 m, Condition= Very Good , Availability= 2026-08-20, Max. Die-cutting Speed 4000 sheets/h Die-cutting Precision ±0.25mm Max. Die-cutting Pressure 250T? Max. Paper Size 1500×1100mm Min. Paper Size 550×450mm Max. Die-cutting Size 1490×1090mm Paper Processed Cardboard 200-2000g/? Corrugated paper =8mm (max. thickness) Total Power 13.5KW/18KW? Weight 16T/18T Dimensions 4500×2300×2400mm 6600×2300×2400mm Very good condition Immediately available
Impressions=0 m, Condition= New , Availability= 2026-08-20, ? HT760E used for hang tag, label, carton box, hand bag die cutting?creasing and cold embossing. ? Machine is equipped with vice feeding unit, pneumatic sampling, auto timing lubrication system, main dive gear chiller, etc. exerting the machine to work its full potential. ? Electrical components are all of international famous brands to ensure running performance. ? Electric control system monitors in real time the running state of the whole machine by PLC, electronic cam and photoelectric switch, which is convenient for fault diagnosis. ? Becker Vacuum pressure pump and Siemens Main motor; ? CNC ensures the parts’ accuracy; ? Equipped high capacity man-machine interface designs LCD. ? It shows solution for trouble shooting, routine maintenance etc; ? Full color Man-machine interface is more user friendly and easy ...
Impressions=0 m, Condition= New , Availability= 2026-08-20, 16” Touchscreen Fully automatic paper cutting function Storage capacity for up to 100 programs Storage capacity for up to 10,000 operations Maximum back gauge speed: 36 m/min Cutting speed: 45 cuts/min Two HSS blades Display resolution: 0.01 mm Positioning accuracy: 0.01 mm Back gauge speed: 16 m/min 8 language options Data transfer via USB and PC programming CE and FCC certified Panasonic servo motor Siemens PLC American (AB) safety photoelectric cells French (TE) main electronic components German (WESSEL) hydraulic system Japanese (OMRON) electronic system Italian oil pump Italian balancing valve Excellent condition
OMES CEU 13 punching-shearing machine ; Eccentric machine with foot control; with punches ; suitable for cutting and punching work in steel ; Voltage: 380 volts ; Cutting capacity: 80 x 14 mm steel ; Solid round: 32 mm steel ; Punching capacity: 25 mm in 13 mm thick steel Auction-ID: A1-48979-38
Peddinghaus Peddimaster 60/100H; Voltage: 380 volts; Shearing capacity: 100 TONS; Strip: 500x14mm (steel); Punching capacity: 60 TON; Punch: 30 in 12mm (steel); Electric cutting stop: yes; Foot control: yes; Weight approx. 2000kg Auction-ID: A1-48979-7
max. format 26 x 38 cm Built in 1967 2 locking frames Inking unit not complete Delivery date: immediately from stock
Heidelberg SGS Punching Machine / Die Cutting 72 x 102 cm Heidelberg Shed Storage / HighPile Stream Feeder High Pile Delivery
Automatic CNC peddinghaus punch with forklift control available if required Auction-ID: A3-46147-19021
Extension: 580mm, including punching tools Auction-ID: A1-49001-12
Trumpf TruMatic 6000 FMC -1300 Sheetmaster + Gripmaster Hersteller: Trumpf Typ: TruMatic 6000 FMC -1300 Baujahr: 2006 Zustand: gebraucht, sehr gut. regelmässig von Trumpf gewartet. Maschine ist unter Strom und im Einsatz. Betriebsstunden NC-Stunden: 70.305h Strahl-Ein Stunden: 17.217h Steurung: Siemens Sinumerik 840 D Stanzkraft: 220KN Laserleistung: 2700W Arbeitsbereich Laserbetrieb ca.: 2585 x 1280 mm Arbeitsbereich Stanzbetrieb ca.: 2585 x 1370 mm Max. Blechdicke ca.: 8 mm Auflagetische Bürstentische CE-Kennzeichnung Standardausstattung: Stabiler, gut zugänglicher C-Rahmen Koordinatenfürhung mit integriertem Linearmagazin, 21 Plätze für Werkzeuge und Spannpratzen 1 Spannpratzen Wartungsfreie Drehstrom Servomotoren Teilerutsche 500 x 500 mm (sensorüberwacht) HI-LAS Hochdruckschneiden TRUMPF Laser: CO2-Laser TLF 2700 Hochfrequenzanregung Lasersteuerung T ...
With vibratory feeder and digital controller Auction-ID: A1-48377-22
for punching for different center hole diameters in CD/DVD - nickel rammers, Pneumatically driven precision punch with rotating table for multiple punching sizes. Auction-ID: A1-49000-63
for punching the center hole in CD / DVD - nickel pestle Auction-ID: A1-49000-62
Maximum sheet format: 1420 x 1020 mm Minimum sheet format: 700 x 500 mm Maximum cutting force: 600 t Gripper margin: 18 – 22 mm Maximum output: 6000 sheets/hour Processable materials: Cardboard 100 – 1000 g/m² Corrugated board: F, E, B, C, F/F, F/E, F/B, E/E, E/B - Flatbed die-cutter with stripping station, inter-sheet inserter, and pre-stacking device, operator platform - 1 x Preparation table for external tool setup - 6 x Frames for stripping forms - 6 x Chase frames for cutting dies - 6 x Setup trolleys
Incl. accessories, consisting of: a.o. Control unit, dimensions (LxWxH) approx: 650x760x1850 mm Control cabinet, dimensions (LxWxH) approx: 3000x700x2450 mm Dispenser, swivelling, dimensions (LxWxH) approx: 1600x2400x2000 mm, diameter approx: 1500 mm Feeder, dimensions (LxWxH) approx: 1600x1100x1500 mm Soundproof cabin, dimensions (LxWxH) approx: 6600x3260x4400 mm, internal dimensions (LxWxH) approx: 4650x3080x4200 mm 2 magnetic belt conveyors 2-hand control Protective fence Auction-ID: A1-49674-9
Trumpf TruMatic 6000 FMC -1300 Sheetmaster + Gripmaster Manufacturer: Trumpf Type: TruMatic 6000 FMC -1300 Year of Make: 2006 Condition: used, very good. regularly serviced by Trumpf. Machine is energized and in use. Operating hours NC hours: 70,305h Beam One Hours: 17,217h Control: Siemens Sinumerik 840 D Punching force: 220KN Laser Power: 2700W Working area laser operation approx.: 2585 x 1280 mm Working area punching operation approx.: 2585 x 1370 mm Max. sheet thickness approx.: 8 mm Support Tables Brush Tables CE marking Standard equipment: Sturdy, easily accessible C-frame Coordinate guide with integrated linear magazine, 21 spaces for tools and clamping claws 1 clamping claws Maintenance-free three-phase servo motors Parts chute 500 x 500 mm (sensor-monitored) HI-LAS High Pressure Cutting TRUMPF Laser: CO2 laser TLF 2700 High-frequency excitation Laser control TASC 3 Cutting he ...
maximum number of results exceeded
please refine your search
860 € 
