135,440 used machines on RESALE, but how to find them? Machine Search
This ERMAK EPP 1270 x 30 was manufactured in 2010. It features a punching force of 30 tons, a capacity of 6 mm, and can deliver up to 700 strokes per minute. The machine has a motor power of 11 kW and an oil capacity of 300 liters. Dimensions are 4000 mm in width, 4250 mm in length, and 2330 mm in height. Contact us for more information about this machine.
Hydr. 25 ton plate punching machine with sliding head Work area 1600 x 500 mm Weight approx. 1500 kg Height 210 cm
This Sahinler HKP-Z 100 was manufactured in 2016. A robust C-frame PLC controlled deep drawing press, it features a pressure force of 1000 kN and a stroke of 500 mm. The machine includes a large table size of 900x600 mm and a throat depth of 300 mm, suitable for diverse punching and bending tasks. Consider the opportunity to buy this Sahinler HKP-Z 100 punching and bending machine. Contact us for more information about this machine.
This TRUMPF TruPunch 1000 (S19) was manufactured in 2018. It features a closed machine frame, hybrid axis system, and a linear magazine with 20 spots for clamps and tools. Equipped with maintenance-free 3-phase servo motors and a TRUMPF control based on Bosch Rexroth IndraMotion MTX, it offers advanced punching capabilities and efficient operation with only 16,000 work hours. Contact us for more information about this machine.
Max. sheet size: 740 x 1040 mm Min. sheet size: 350 x 400 mm Max. production speed: up to approx. 8,000 sheets/hour Max. die-cutting force: approx. 250 tons Paper / cardboard thickness: 90 g/m² – 2,000 g/m² Max. corrugated board thickness: approx. 4 mm 68,372 operating hours Standard machine with existing accessories Pallet feeder (NonStop) Pull lay on the left side Stripping station Blanking station Non-stop delivery min. 4 × upper frames min. 4 × lower frames 2 × quick-lock frames
Heidelberg OHZ S, age 1956 540x720 mm (21x28") for die-cutting Available: at short term
Cart beam punching machine / travelling head die cutting press 25 ton, 1600 x 500 mm, punching head 500 x 500 mm with 2-hand touch triggering, with light curtain approx. 1500 kg
Reference ID: PP-56668 Category: Flatbed Die Cutter Manufacturer: Bobst Model: SPO 1600 Year: 1986 Speed: 6000 sheets/h Max. size: 160 × 110 cm Min. Size: 60 × 52 cm Condition: Good Location: Europe Availability: Immediately
CNC punching machine manufactured in 1991. This TRUMPF TRUMATIC 120R features a punching force of 15 tons and a maximum punching diameter of 38 mm. It offers a working area of 1000 x 2000 mm with repositioning and includes a complete set of tools. If you are looking to get high-quality punching capabilities, consider the TRUMPF TRUMATIC 120R machine we have for sale. Contact us for further details regarding this machine.
Plate punching machine 70x100 Brand: Grapho Metronic
new EcoCut V8 perforated sheet punch consisting of: - Eccentric punch with drive - Infinitely adjustable feed speed - Machine body: RAL 5003 / coarse structure / semi-gloss - Control cabinet: RAL 7035 / coarse structure / semi-gloss - Front panel: RAL 5003 / structure / semi-gloss - EcoOil Lubrication System for EcoCut Punching Machines - Integrated compressed air supply unit for EcoOil lubrication system - Machine table EcoCut for setting up automatic punching machine - Punching oil - standard 1 liter special cutting oil for optimal lubrication of all EcoCut tools - Round hole punching tool 7xd5 Sheet thickness steel :0.7 mm Sheet thickness aluminium :1,0 Sheet thickness front: 0.5 mm Colour: light grey/blue Total power requirement: 16 A Weight: 500 kg Dimensions: 910 x 1120 mm Projection: 280 mm Punching capacity 150 stroke/min Compressed air :2 - 5 bar Steples ...
Reference ID PP-57800 Category Flatbed Die Cutter Manufacturer Bobst Model SP 130-E Year Built 1985 Color - Impression - Working Hours - Speed 7000 sheets/h Max. size 130x92 cm Min. size 58x45 cm Condition Good Location Europe Availability Immediately
Offered is a hydraulic punching machine: Punching force: 100tons (Tm), max. punching cross-section: 2350mm², punching capacity (standard): Ø50mm at 15mm material thickness, punching depth: 500-800mm, incl. special accessories: round punch: max. Ø80mm at 9mm, max. Ø100mm at 7.5mm, square punch: 50mm at 12mm, 60mm at 9.5mm, 70mm at 8mm, rectangular punch: max. 90 x 25mm at 10mm. Inspection possible by appointment.
A Trumpf punching machine still in operation, including a Trumalift loading and unloading unit that has not been used for a longer period, is available. 1) CNC punching machine Trumpf TruMatic 500, year of manufacture: 1993, max. punching force: 220kN, max. sheet thickness: 6.4mm, max. workpiece weight: 150kg, max. punching diameter: 76.2mm, simultaneous motion: 108m/min, stroke rate: 900/min, machine dimensions X/Y/Z: approx. 6700mm/5800mm/2200mm, weight: approx. 11000kg. 2) Trumpf Trumalift SheetMaster 1250 loading and unloading system, year of manufacture: 1993, max. sheet dimensions X/Y: 2500mm/1250mm, max. sheet thickness: approx. 8mm. Documentation available. An on-site inspection is possible.
Reference ID PP-58237 Category Flatbed Die Cutter Manufacturer Bobst Model SP 142-ER Year Built 1985 Color - Impression - Working Hours 75690 Speed 6000 sheets/h Max. size 142 x 102 cm Min. size 70 x 50 cm Condition Good Location Europe Availability Immediately Machine Description Double Stripping working hours 75690
Dimensions (L/W/H): 0x0x0 mm Weight: 100 kg Total power requirement: 0 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 0x0x0 mm Weight: 90 kg Total power requirement: 0 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 0x0x0 mm Weight: 90 kg Total power requirement: 0 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 0x0x0 mm Weight: 90 kg Total power requirement: 0 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
This TRUMPF TRUMATIC 500 was manufactured in 1998. It features a maximum punching force of 220 kN and can handle sheet thicknesses up to 6 mm. The machine accommodates workpieces up to 150 kg, with a working range of 3000 mm on the X-axis and 1500 mm on the Y-axis. Contact us for more information about this machine.
CNC punching machine manufactured in 2001. This Pullmax 6000 features a maximum sheet size of 3000 × 1500 mm and a maximum punching force of 300 kN. It has a tool capacity of 15 positions and a maximum tool diameter of 76.2 mm. If you are looking to get high-quality punching capabilities, consider the Pullmax 6000 machine we have for sale. Contact us for further details.
KAMA TS 105 / HFS 105 Year 2007 Diecutting and Hotfoil Sheet size : 74 x 105 max. / 33 x 48 min. Cardboard thicknesss: 130 - 1500 g/m² (1.8mm) Max. pileheight feeder : 1150mm Max. pileheight delivery : 880 mm Features: Mabeg Feeder Digital control Sheet allignment KAMA HFS 105 hot foil unit
CNC punching machine manufactured in 2001. This Salvagnini S4-40 features a maximum sheet size of 4064 x 1524 mm and can process materials up to 5 mm thick, including mild steel and aluminum. It includes a versatile H-type punching head with multiple stations for efficient operation. If you are looking to get high-quality punching capabilities, consider the Salvagnini S4-40 machine we have for sale. Contact us for further details.
This 11-axis Finn-Power SG6 12.61 was manufactured in 2010. It features a maximum punching force of 300 kN and can handle sheet thicknesses up to 6 mm. The machine includes a thick turret with 20 stations and an integrated CNC right-angle shear for efficient part separation. If you are looking to get high-quality punching capabilities, consider the Finn-Power SG6 12.61 punching and bending machine we have for sale. Contact us for further details.
High-performance mechanical automatic punching machine with coil system for strip material processing in series production. Manufacturer: Kaiser Pressen Model: KSTU 3150-15 R Machine Type: Automatic Punching Machine Year of Make: 1994 Press force: 3150 kN Drive type: mechanical Stroke rate: 20 – 120 1/min Plunger stroke: 20 – 150 mm Plunger adjustment: 150 mm Table surface: 1780 x 1250 mm Plunger area: 1500 x 1000 mm Installation height: 565 mm Tool weight max.: 3000 kg Strip width: 30 – 800 mm Band thickness: 0.5 – 3 mm Max. strap thickness: 4 mm Strip infeed height: 160 – 260 mm Belt speed: 4 – 30 m/min Straightening rollers: 9 pieces Feed accuracy: ± 0.1 mm Coil inner diameter: 508 mm Coil outer diameter: 1000 – 1500 mm Supply voltage: 3 x 400 V Air pressure: 5 bar Location: Radeberg
A barely used foil die-cutting and embossing machine Kama with integrated hot foil stamping is available. Die-cutting force: 165t, max. sheet format X/Y: 760mm/600mm, min. sheet format: 279mm/210mm, max. die-cutting format X/Y: 743mm/585mm, production speed: 5500sheets/h, gripper margin: 10mm, min. paper weight: 100g/m², max. cardboard weight: 1500g/m². Machine dimensions X/Y: approx. 5000mm/2700mm/2750mm, weight: approx. 6000kg, operating hours: approx. 1000h. Including Kama AutoRegister, vacuum pump, compressor and servo main drive. Documentation available. An on-site inspection is possible.
An old, however overall only 12 months operated, Friedrich Petig row punching line for copper busbar production (punching) is available. Product: copper bars/busbars/busbars/Cu-bars, control system: Siemens. Documentation available. An on-site inspection is possible.
CNC punching machine manufactured in 2019. This Euromac MBX 6 Plus 1250/30-2250 features a total of 24,439,006 hits and a total working time of 11,309 hours. It includes a CNC control system with a dedicated console and a brush table to prevent sheet scratching. If you are looking to get high-quality punching capabilities, consider the Euromac MBX 6 Plus 1250/30-2250 machine we have for sale. Contact us for further details.
Inv. Num. : 9160 Type: Trumatic 500R Producer: Trumpf Created: 2003 Parameters: Compressive force: 22 t
max. format 26 x 38 cm Built in 1964 Inking unit not complete 2 locking frames Dry pollinator Delivery date: immediately from stock
X-axis: 2500mm, Y-axis: 1270mm, positioning speed X-axis/Y-axis: 80/90m/min, simultaneous axis speed: 100m/min, punching capacity: 200kN, number of turret stations: 51, max. material thickness mild steel: 3.2mm, max. material weight at traverse speed F1/F4: 50/150kg, positioning accuracy: ±0.1mm, stroke rate X-axis: 350/min, stroke rate Y-axis: 260/min, max. stroke length: 42mm, max. feed speed X-axis/Y-axis: 80/60m/min, turret speed: 30rpm, compressed air requirement: 500l/min, operating air pressure: 5bar, connected load: 19kVA, length: 4165mm, width: 5120mm, height: 2082mm, height with mirror: 3028mm, weight: 13t, operating hours: 4531h, regularly maintained by the manufacturer, with documentation, without punching tools. An on-site inspection is possible.
This 6-axis Baykal BPM-T 1525X30 was manufactured in 2020, featuring a robust 30-ton hydraulic punching force and a versatile tooling system with 20 stations and indexable tool holders. It supports a working range of 3000 × 1500 mm and rapid axis speeds (X: 100 m/min, Y: 80 m/min). Equipped with Bosch MTX CNC control and Lantek CAM software, it ensures precision and efficiency. If you are looking to get high-quality punching capabilities, consider the Baykal BPM-T 1525X30 machine we have for sale. Contact us for more information.
Shearing/Punching Machine PEDDINGHAUS 210 SUPER 11 Throat depth: 305 mm Maxi punching capacity: 40 T Power: 3 kW Punching capacity: Ø 20 x 15 mm - Ø 90 x 5 mm (see abacus) Shearing capacities: (see abacus) Round shearing: Ø 34 mm Square shearing: 30 x 30 mm Angle shearing capacity: 100 x 10 mm 1 side for shearing/undercutting - 1 side for punching Delivered with some punches Voltage: 380 V Dimensions (L x W x H): 1400 x 1000 x 1800 mm Weight: approx 1,2 T
CNC Punching Machine manufactured in 2005. This DANOBAT P1631 features a punching force of 30 tons and can handle a maximum sheet thickness of 6 mm. It includes an automatic loading system, servo-driven axes, and a hydraulic punching system. If you are looking to get high-quality punching capabilities, consider the DANOBAT P1631 machine we have for sale. Contact us for further details.
pressure: 25 t no. of strokes: - Hub/min sheet width: - mm Control: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
This 3-axis Euromac ZX INDEX was manufactured in 2004. It features a maximum punching force of 300 kN and a working area of 1250 mm in the X-axis and 1000 mm in the Y-axis. The machine is capable of processing steel up to 7 mm thick. If you are looking to get high-quality punching capabilities, consider the Euromac ZX INDEX cnc punching machine we have for sale. Contact us for further details.
This 3-axis TRUMPF Trupunch1000 S05 was manufactured in 2018. It features a working area of 2500 x 1250 mm and is equipped with maintenance-free three-phase motors. The machine includes a linear magazine with 20 stations for clamps and tools, and an electro-hydraulic punching head with programmable features. If you are looking to get high-quality punching capabilities, consider the TRUMPF Trupunch1000 S05 CNC punching machine we have for sale. Contact us for further details.
Manufacturer: Finn-Power OY, Kauhava, Finland Model: F6 SV Year of manufacture: 2005 Machine weight: 13500 kg Operating hours: approximately 66,603 hours Note: housing is not included in the purchase Technical Data - Punching force: 30 t (300 kN) - Maximum workpiece size (L x W): 4061 x 1528 mm - Maximum workpiece thickness: 8 mm - Maximum workpiece weight: 200 kg - Rapid traverse X axis: 80 m/min - Rapid traverse Y axis: 60 m/min - Number of turret stations: 20 - Turret rotation speed: 30 rpm - Tool type: thick turret - Maximum tool diameter: 89 mm - Tool change time: 1 to 3 seconds - Maximum CNC rotating tool diameter: 89 mm - Maximum CNC rotating tool speed: 58 rpm - Maximum travel speed: 100 m/min - Drilling accuracy: 0.1 mm - Positioning accuracy: 0.08 mm - Power supply: 47 kVA - Average power consumption: 24 kW - Oil tank capacity: 330 l - Maximum operating pressure: 300 bar ...
CNC punching machine manufactured in 2013. This Euromac MTX FLEX 12 hybrid features a maximum punching force of 30 tons and an X-axis stroke of 1250 mm. The Y-axis stroke is 1300 mm for multi-tool setups and 1250 mm for single-tool configurations. If you are looking to get high-quality punching capabilities, consider the Euromac MTX FLEX 12 hybrid machine we have for sale. Contact us for further details.
Impressions=0 m, Condition= New , Availability= 2026-07-07, 16” Large full touch LCD screen. Fully automatic paper cutting function. Program storage capacity of up to 300 programs. 90,000 motion storage capacity. Maximum trench speed 36m/min. Cutting speed: 42-45 pcs/min Trench precision 0.01mm. Fully automatic paper cutting function. Eight language options. Measurement and blade movements can be seen on the screen. Metric system options. Data transfer via USB and programming and adjustment by PC. New modern design. It has many security measures. German security photocells. German hydraulic system. Italian oil pump. Panasonic servomotor. Siemens PLC. Italian balance valve.
Impressions=0 m, Condition= Very Good , Availability= 2026-07-07, 3 point gluing Side gluing Suitable for straight line boxes Bottom and top glue application discs available With standard equipment
Impressions=0 m, Condition= New , Availability= 2026-07-07, Servo Feeder Pre-Folding Section Side Gluing Crash Lock Bottom Bottom Gluing Unit (Left Side) Folding and Closing Section Motorized Trombone Section Folding and Closing Section Pressing Unit KQ” Brand 3 Cold Glue Guns Pneumatic Press LED Display Maximum Carton Weight: 800 g/m² Carton Type: B, N, E & F Flute Maximum Speed: 500 m/min Max. Folded Carton Thickness: 15 mm
Impressions=0 m, Condition= New , Availability= 2026-07-07, Max.Paper Size 600X420mm Min.Paper Size 280X233mm Max.Cutting Size 590X410mm Max.Cutting Speed 10000s/h/6000s/h(vision) Max.Pressure 180T Die-cutting Precision ±0.075mm Inside Chase Size 600X430mm Die Cutting Plate Size 600X420mm Height of Cutting Rules 23.8mm First Cutting Rule 8~16mm Min.Gripper Margin 9mm Max.Feeding Pile Height (incl.pallet) 900mm Max.Delivery Pile Height (incl.pallet) 800mm Thickness of Cardboard 80g/?~1000g/? Thickness of Corrugated Paper 0=2mm Total Power 10kw/12kw(vision) Weight 5T/5.5T(vision)
Impressions=0 m, Condition= Good , Availability= 2026-07-07, Description is coming
Impressions=0 m, Condition= Good , Availability= 2026-07-07, With chases and frames In a good condition Can be seen in our warehouse in Istanbul Available on October 2021
Punching Laser Machine Trumpf TruMatic 7000 Year of construction 2010 Rexroth IndraMotion MTX Controller Laser type: TruFlow 4000 Laser power: 4000 W Working Area:: Punching operation without repositioning: X 3,050 mm Punching operation: Y 1,550 mm Laser operation: X 3,050 mm Laser operation: Y 1,550 mm Combined operation: X 2,500 mm Combined operation: Y 1,550 mm Sheet thickness: max. 8 mm Workpiece weight: max. 280 kg Punching force: 220 kN X-axis speed: max. 100 m/min. Y-axis speed: max. 60 m/min. Simultaneous speed: max. 116 m/min. Maximum stroke rate:: Punching (E = 1 mm): max. 1,200 1/min. High Light: max. 3,000 1/min. Tools:: MultiTool tool change time: 0.3 sec. Number of tools/clamps: 21 /4 pieces Parts removal:: Workpiece size at the part removal flap (punching operation): 500 x 500 mm Workpiece size at the part removal ...
Key data: 220 kN, 8 mm, 3050 mm
Punching Laser Machine Trumpf TruMatic 7000 Year of construction 2010 Rexroth IndraMotion MTX Controller Laser type: TruFlow 4000 Laser power: 4000 W Working Area:: Punching operation without repositioning: X 3,050 mm Punching operation: Y 1,550 mm Laser operation: X 3,050 mm Laser operation: Y 1,550 mm Combined operation: X 2,500 mm Combined operation: Y 1,550 mm Sheet thickness: max. 8 mm Workpiece weight: max. 280 kg Punching force: 220 kN X-axis speed: max. 100 m/min. Y-axis speed: max. 60 m/min. Simultaneous speed: max. 116 m/min. Maximum stroke rate:: Punching (E = 1 mm): max. 1,200 1/min. High Light: max. 3,000 1/min. Tools:: MultiTool tool change time: 0.3 sec. Number of tools/clamps: 21 /4 pieces Parts removal:: Workpiece size at the part removal flap (punching operation): 500 x 500 mm Workpiece size at the part removal ...
Punching Laser Machine Trumpf TruMatic 7000 Year of construction 2010 Rexroth IndraMotion MTX Controller Laser type: TruFlow 4000 Laser power: 4000 W Working Area:: Punching operation without repositioning: X 3,050 mm Punching operation: Y 1,550 mm Laser operation: X 3,050 mm Laser operation: Y 1,550 mm Combined operation: X 2,500 mm Combined operation: Y 1,550 mm Sheet thickness: max. 8 mm Workpiece weight: max. 280 kg Punching force: 220 kN X-axis speed: max. 100 m/min. Y-axis speed: max. 60 m/min. Simultaneous speed: max. 116 m/min. Maximum stroke rate:: Punching (E = 1 mm): max. 1,200 1/min. High Light: max. 3,000 1/min. Tools:: MultiTool tool change time: 0.3 sec. Number of tools/clamps: 21 /4 pieces Parts removal:: Workpiece size at the part removal flap (punching operation): 500 x 500 mm Workpiece size at the part removal ...
Rotary Die Cutter Equipped with : FFU-4055 flat feeder unit RD-4055 rotary die cutter SPC-4055 separator
Impressions=17 m, Condition= Very Good , Availability= 2026-07-11, Maximum sheet size: 760 × 600 mm Maximum die cutting size: 743 × 585 mm Minimum sheet size: 279 × 210 mm Paper: 100 g/m² and above Board: up to 1,500 g/m² (approx. 1.8 mm) Plastic materials (PET, PP, PVC): up to 1,500 g/m² Maximum speed: 5,500 sheets/hour Maximum cutting pressure: 165 tons Gripper margin: 10 mm Machine dimensions: approx. 4.87 × 2.69 m Weight: approx. 5,500–6,000 kg Features: Automatic die cutting Creasing Embossing Hot foil stamping
maximum number of results exceeded
please refine your search
