127,254 used machines on RESALE, but how to find them? Machine Search
Spindle support for SUI 80 longitudinal direction
Technical data Manufacturer: Colchester Model: MASCOT (Electronic Mascot) Machine Type: CNC Lathe Control: GE Fanuc Series 20-T Spindle speed: approx. 20 – 1600 rpm Spindle bore: approx. 74 – 76 mm Turning diameter over bed: approx. 430 mm Turning diameter over slide: approx. 260 – 270 mm Center width: approx. 1200 – 2500 mm Spindle motor power: up to approx. 11 kW Weight: approx. 2.2 – 3.0 t Configuration CNC control Fanuc 20-T Tool holder / turret (typical) Tailstock available Coolant Setup Closed machine enclosure Note The technical data was researched on the basis of publicly available information on the Colchester Mascot series. Original machine documentation was not available. Deviations are possible. Auction-ID: A7-46048-31
Serial number CK08004 CNC control, brand, type SIEMENS SINUMERIK Machine weight 5000kg Dimension L 4100mm Dimension w 1800mm Dimension h 2300mm Auction-ID: A7-46048-160
(3x) Lathe chucks (3- and 4-jaw) with loose jaws and accessories. Auction-ID: A1-45979-46
Speed: from 35 to 3000 rpm Spindle passage: approx. 45 mm Center length: approx. 600 mm Center height above bed: approx. 180 mm Turning diameter over bed: approx. 360 mm Center height above support: 130 mm Turning diameter over support: approx. 260 mm The machine is equipped with a tailstock, a lathe steel holder and a three-jaw chuck from the manufacturer RÖHM, diameter: 160 mm and a two-axis digital display from the manufacturer FAGOR Auction-ID: A7-46287-75
Works perfectly The frame is supplied with the hardware Set of gouges supplied with the lathe Auction-ID: A3-43519-36014
Consisting of: (1x) Clamping plate, (1x) carriage/guide seat and 4-jaw chuck. Auction-ID: A1-45979-47
Center width: 750 mm Turning diameter over bed: approx. 300 mm Turning diameter over support: approx. 190 mm Bar passage: approx. 40 mm incl. three-jaw chuck, diameter: approx. 155 mm Auction-ID: A7-46287-25
Stored in working condition, with digital reading with material cabinet. The buyer must provide his own transport. Elevator available to charge it. Auction-ID: A3-43519-17024
Center width: approx. 500 mm Turning diameter over bed: approx. 260 mm Turning diameter over support: approx. 60 mm Bar passage: approx. 25 mm Auction-ID: A7-46287-26
Spindle nose: Camlock D1-6, Machine equipped with: (1x) Sony digital readout, Type: LG10-2 with X and Y readout, (3x) chuck, (1x) tailstock. Auction-ID: A1-45979-100
Serial number: 4659 Max. turning length: approx. 200 mm Turning diameter over support: 60 mm Turning diameter over bed: 110 mm Incl. manual rod feeder and workbench with stock of machine accessories such as collets as well as various holders, turning steels, open-end wrenches and inserts Auction-ID: A7-46287-24
Stored in working condition, buyer must provide transport himself. Elevator available to charge it. Auction-ID: A3-43519-17022
An old, compact precision turret lathe Boley & Leinen is available. Speed: 4000rpm, tool stations: 6, center height: 90mm, distance between centers: 300mm, machine dimensions X/Y/Z: approx. 1500mm/800mm/1500mm, weight: approx. 500kg. An on-site inspection is possible.
Technical Specifications Height of the tips: 500 mm Center spacing: 6000 mm Maximum turning diameter on bench: 1000 mm Maximum turning diameter on carriage: 310 mm Bar passing: 150 mm Accessories: Rapid feed on carriage ; Fixed steady rest ; Platform Item sold in unverified status Auction-ID: A1-44614-12
Technical Specifications Maximum Rotating Diameter: 420mm Maximum turning length: 291 mm Maximum turning diameter: 320 mm Left rpm: 3200 rpm; 7.5-11 kW X-axis travel: 190 mm Z-axis travel: 350 mm X-Z rapid feed speeds: 24 - 30 m/min Tool Holder: 12 Positions Control: FANUC 0i-TF Approximate weight: 3500 Kg Approximate Footprint: 2214mm x 2220mm x 2713mm Accessories: Chip evader ; Remote handwheel Notes: Complete with 16-position gantry loading system Item sold in unverified status Auction-ID: A1-44614-2
Technical Specifications Pole height: 102 mm Center spacing: 450 mm Maximum turning diameter on bench: 200 mm Maximum turning diameter on carriage: 120 mm Bar passing: 25 mm Spindle: 50 - 5000 rpm; 3 kW Tailstock: CM 2 Tailstock sleeve diameter: 30 mm Tailstock sleeve stroke: 80 mm Tool Holder: MULTIFIX Approximate dimensions: 1500 x 510 x 1550 mm Item sold in unverified status Auction-ID: A1-44614-11
A lathe Spinner requiring repair is available. Travel X/Z: 96mm/245mm, max. turning length: 245mm, max. swing diameter: 120mm, turning diameter over bed: 290mm, spindle bore: 42mm, speed: 6000rpm, rapid traverse: 15m/min, tool stations: 12, tool holder: VDI16, bar passage: 42mm. Machine dimensions X/Y/Z: approx. 4400mm/1200mm/2200mm, weight: approx. 3000kg, control: Siemens Sinumerik ShopTurn. Including bar feeder and drawer contents. The machine has the following problems: high measuring inaccuracy, problems with the handwheel and measuring arm as well as measurement deviation. Documentation available. An on-site inspection is possible.
EXTRON 7-HK metal lathe ; equipped with longitudinal and transverse feed and suitable for threading; A-quality lathe; Voltage: 230 volts ; Between centers: 760 mm ; Turning diameter: 289 mm ; Over support: 180 mm ; Diameter: 28 mm ; Speed: 60–1700 rpm ; With 3-jaw with inner and outer jaws Auction-ID: A1-45170-22
HUVEMA HU 360 VA lathe ; frequency-controlled with foot brake and digital readout; professional universal lathe suitable for metalworking ; Voltage: 380 volts ; Between centers: 1000 mm ; Max. turning diameter: 356 mm ; Max. speed: 3000 rpm ; Diameter: 38 mm ; Tailstock: MK-3 ; With Bison 3-claw ; Weight approx. 1350 kg ; Auction-ID: A1-45170-13
TARGET 410x760 metal lathe ; conventional lathe with automatic feed on longitudinal and transverse and suitable for threading; Voltage: 380 volts ; Power: 6.6 kW ; Between centers: 760 mm ; Max. turning diameter: 410 mm ; Diameter: 52 mm ; Recording: MK-4 ; Speed: 40–2000 rpm ; Foot brake: yes ; Cooling pump: yes ; Occupational health and safety technical: yes; Auction-ID: A1-45170-10
Technical data Manufacturer: WEILER Model: Commodor B Machine Type: Lead and Pull Spindle Lathe Turning diameter over bed: 380 mm Turning diameter over slide: 190 mm Center width: 750 / 1000 mm Spindle bore: approx. 56 mm Spindle speed: 25 – 2000 rpm Connected load: 4 kW Voltage: 380 V Weight: approx. 1300 – 1500 kg Configuration Lead and pull spindle Tapping function (metric / inch) 3-jaw chuck Additional chuck Multifix tool holder Tailstock Coolant Setup Chip tray Note Technical data was taken from the nameplate and machine documentation. Specifications may vary depending on the version. Auction-ID: A1-46315-52
WEILER LZ330 / From educational institution incl. new 3-axis digital display -Turning diameter over bed 330mm -Turning diameter over support 165mm -Turning length 800mm -Speed range 25 - 2800 rpm -Automatic / longitudinal plan feeds -Multifix with 3x inserts -Drive power 3KW -Three-jaw chuck -Collet device with 20x collets -Copying device -Miscellaneous Accessories -Documentation Dimensions: LxWxH 1.8x0.7x1.6 meters / Weight 750Kg
SMEC SL 2000 MYear of manuf. : 2023 Control : Siemens 828D - ShopTurn Turning diam. : 360 mmTurning length : 520 mm____________Description:Main spindle:Speed:6,000 rpmPower (max.):18.5 kWBar capacity:52 mmWorkpiece clamping:3-jaw chuck, Samchully MH-206 V1Tool holder:Technology:12-station turretTool holder:BMT55Tool drive:5,000 rpmFeatures/Accessories:Chip management:Chip conveyorCoolant management:IKZ pump with oil skimmer and high pressure, 10 barTool measurement:Automatic measuring armAutomation:PreparedFinished part removal:Parts catcher with collection boxSetup operation:Electronic handwheel
Gildemeister Twin 65 Y - RG2Year of manuf. : 2007 Control : Siemens 840 D Turning diam. : 250 mmTurning length : 650 mm____________Description:In General:Year of construction:2007Control:Siemens 840 DBar capacity:65 mmTurning diameter:350 mmTurning length:650 mmMain spindle:Technology:Motor spindleSpeed:5,000 rpmPower max.:35 kWTorque max.:370 NmC-axis:0.001Bar capacity:65 mmChuck:Hainbuch Spanntop size 65Clamping cylinder:Hollow clamping cylinderSub spindle:Technology:Motor spindleSpeed:5,000 rpmPower:26 kWTorque:290 NmC-axis:0.001Chuck:Hainbuch Spanntop size 65Clamping cylinder:Partial hollow clamping cylinderZ-axis:670 mmX-axis:175 mmTool carrier i (X/Y/Z):Technology:Tool turret, 12 stationsTool holder:VDI 30Tool drive:4,000 rpm, 11 kW, 28 NmX-axis:300Y-axis:80 mm ( +/- 40 mm)Z-axis:650 mmTool carrier II (X/Z):Technology:Tool turret, 12 stationsTool holder:VDI 30Tool drive:4,000 ...
SMEC SL 2000 MYear of manuf. : 2023 Control : Siemens 828D - ShopTurn Turning diam. : 360 mmTurning length : 520 mm____________Description:Main spindle:Speed:6,000 rpmPower (max.):18.5 kWBar capacity:52 mmWorkpiece clamping:3-jaw chuck, Samchully MH-206 V1Tool holder:Technology:12-station turretTool holder:BMT55Tool drive:5,000 rpmFeatures/Accessories:Chip management:Chip conveyorCoolant management:IKZ pump with oil skimmer and high pressure, 10 barTool measurement:Automatic measuring armAutomation:PreparedFinished part removal:Parts catcher with collection boxSetup operation:Electronic handwheel
EMCO Hyperturn 65Year of manuf. : 2017 Control : Siemens 840Dsl Turning diam. : 500 mmTurning length : 800 mm____________Description:Mainspindle:Technology:MotorspindleSpeed:4.0 00 rpmPower (max.):29 kWTorque (max.):250 NmBarcapacity:76 mmSubspindle:Technology:MotorspindleSpeed:5.000 rpmPower (max.):29 kWTorque (max.):250 NmEjector:PneumaticMovement in Z:800 mmToolcarrier I (X/Y/Z):Technology:Turret with 12 stationsTaper:VDI30Tooldrive:5.000 rpm, 6,7 kW, 25 NmMovement in X/Y/Z:260/100/800 mmEilgang in X/Y/Z:30/12/30 m/minToolcarrier II (X/Z):Technology:Turret with 12 stationsTaper:VDI30Tooldrive:5.000 rpm, 6,7 kW, 25 NmMovement in X/Z:210/800 mmEilgang in X/Z:30 m/minEquipment/Accessory:Chipmanagement:Chip conveyorCoolingmanagement:Internal cooling unit with paperbeltfilter and High-pressure, 40 barRawmaterialfeed I:Robotinterface preparedRawmaterialfeed II:Barloaderinterface prepa ...
EMAG VTC 250 DUO DDYear of manuf. : 2020 Control : Siemens 840 Dsl Turning diam. : 140 mmTurning length : 700 mm____________Description:In General:Max. workpiece diameter:140 mmChuck diameter:250 mmMax. turning length:700 mmTrack I:Tool carrier I:Tool turret (X/Z)Tool drive:9,600 rpm, 44 NmTool holder:BMTNumber of stations:11 + 1 Part gripperX-axis:310 mmZ-axis:1,115 mmPosition sensors (X/Z):Direct scalesTrack II:Main spindle (OP10):Travelling direct drive spindleSpeed:5,000 rpmPower:33.9 kWTorque:231 NmChuck:Collet chuckClamping cylinder:Hydraulic clamping cylinderSupport control:PneumaticW-axis:772 mmC-axis:0.01°Position sensor (W):Direct scale:Sub-spindle (OP20):Direct drive spindleSpeed:5,000 rpmPower:33.9 kWTorque:231 NmChuck:2+2-jaw power chuckClamping cylinder:Hydraulic clamping cylinderC-axis:0.01°Track III:Tool Carrier II:Tool turret (X/Y/Z)Tool drive:9,600 rpm, 44 NmToo ...
SMEC SL 3000 BLMYear of manuf. : 2023 Control : Siemens 828D - ShopTurn Turning diam. : 405 mmTurning length : 956 mm____________Description:Main Spindle:Chuck:SAMCHULLY HS-12 (12 inch)Spindle Speed (Max.):3,000 RPMSpindle Nose:A2-8Motor Power (Cont./Max):18.5 kW / 26 kWMax. Turning Ø x Turning Length:405 mm x 956 mmTool Carrier (X/Z):Number of Tool Stations:12x BMT65Max. Milling Ø:433 mmTravel (X/Z):245 mm / 1,040 mmRapid Traverse (X/Z):24 m/min / 30 m/minTailstock:Quill Ø:110 mmQuill Stroke:100 mmEquipment/Accessories:Additional Equipment:Tool touch probe (Tool Setter, swiveling)Collision Protection:Turret with Hirth couplingYear of Manufacture:2023Weight:5,600 kg (according to configuration nameplate)Chip Management:Chip conveyorElectrical Connection:380 V / 3PH.PE / 50/60 Hz / 42 kVA::
Mazak Quick Turn Smart 250M L Turning-Milling Center CNC Model Hersteller [manufacturer]: Mazak Germany Type [ type]: Quick Turn Smart 250M L Control unit: Mazatrol smart Incl. handwheel Baujahr[construction year]: 10/2016 Weight [weight]: 6500kg Approx. (L x D x H): 3.4m x 2.0m x 2.0m Full documentation is available. Various accessories after consultation. Top Zustand / condition From first hand, from Germany. Inspection under power can be done at short notice. We will be happy to answer any further questions you may have. Price, from stock here plus VAT. Condition: good - ready for demonstration Delivery: from stock - as seen Payment: purely net - upon receipt of invoice Prior sale, errors excepted. We ask for your order. Other machines and systems available from stock – please inquire. We look forward to seeing you.
\" Lot of approx. 300 kg of turning steels – mixed lot for lathes An extensive lot of turning steels for machine tools is for sale. Inventory according to visual inspection: • External turning steels • Internal turning steels / boring rods • Parting steels • Shaped steels • Partly equipped with carbide • Partly with indexable insert holders Different dimensions and designs. Sale exclusively as a total item. Total weight: approx. 300 kg Material: tool steel / partly carbide tipped Design: various shaft sizes and lengths \" Auction-ID: A7-46417-369
Batch of two four-jaw lathe chucks for independent workpiece clamping. The chucks come from the manufacturers WMW and ROTO RECORD and are ideal for eccentric, asymmetrical or irregular clamping on lathes. Technical data: • Type: Four-jaw lathe chuck, independently adjustable • Included: &nbs p; • 1× WMW DH 130×4-II, Ø130 mm • 1× ROTO RECORD DH 160×4-II, Ø160 mm Auction-ID: A7-46417-114
\" Conventional lead and tension spindle lathe – turning length approx. 1,200 mm – Ø 475 mm Chuck lead and tension spindle lathe made by Boehringer Bros. (VDF), industrial version. Equipment: • 3-jaw chuck Ø 475 mm • Tailstock • Rotating center punch • Extensive accessories in the side cabinet (jaws, holders, inserts, etc.) • Coolant device • Controls on the support Turning length approx. 1,200 mm.Condition: Used machine with age-related signs of use. Visually appropriate to the age. Manufacturer: Gebr. Boehringer GmbH Type: Lead and pull spindle lathe Turning length: approx. 1,200 mm Chuck diameter: Ø 475 mm Spindle bore: approx. 80 mm • Dimensions in mm (LxWxH) approx. 3,450 x 1,300 x 1,700 mm \" Auction-ID: A7-46417-373
3× TOS 3-jaw lathe chuck (Ø80 / 100/ 160 mm)Lot of three 3-jaw spiral chucks from the manufacturer TOS. Condition: • used • traces of wear due to age and use • only complete as an item • manufacturer: TOS • type: 3-jaw spiral chuck, self-centering • Jaws: hard jaws • Included sizes: • Ø80 mm – IU 80 M1 – • Ø100 mm – 100/3-2 M1 – max. 5,300 min⁻¹ • Ø160 mm – IU 160 M1 – max. 3,500 min ...
turning diameter:1600 mm turning length:12000 mm control:FAGOR 8050 Used CNC Lathe with FAGOR 8050 and extensive accessories. For further technical data and accessories, pls browse the Appendix. Parallellathe WMW mod. 4 GUIDE-WAYS ¦ CNC: FAGOR 8050 ¦ bed: monolithic ¦ centres height: 800 mm ¦ centres distance: 12000 mm ¦ swing over cross-slide: 1250 mm ¦ turret: automatic 4 positions ¦ tailstock: motorized ¦ tailstock connection: hydraulic ¦ platform: diam. 1000 mm ¦ steady rests: nr.02 ¦ chip conveyor Warranty: none Take advantage of the favorable leasing and hire-purchase terms from IKB Leasing. Ask us about it.
faceplate diameter:4000 mm swing diameter:4300 mm turning height:2500 mm max. workpiece weight:63 t total power requirement:125 kW weight of the machine ca.:134 t dimensions:6100x10400x8400 mm Used Vertical Turret Lathe with 2 plungers and CNC Siemens 840 table is hydrostatically. Machine equipped with a grinding head. CNC was overhauled in 2000.
turning diameter over bed:2600 mm turning diameter over slide rest:2200 mm turning length:5000 mm faceplate:2050 mm number of spindle speeds:0,7 - 70 rpm total power requirement:ca. 22 kw Height of centres: 1350 mm Distance between centres: 5000 mm Swing over cross slide: 2600 mm Spindle power: 30 HP Spindle speed: 0,7 - 70 rpm Longitudinal swift Control on the carriage Chuck: diam. 2050 mm
turning diameter:570 mm turning length:1000 mm dimensions of the machine ca.:3,25 x 2,03 x 1,95 m Tool disc turret for 8 tools with VDI 30. Not for power tools machine manual, technical documentation; Accessories: 3-jaw chuck, various tool holders Video is available
faceplate diameter:800 mm power requirement:110 kW weight of the machine ca.:37.000 / total 52.000 t transport measurements machine:5,07 x 2,98 x 3,90 m clamping diameter:800 mm :Ø 800 x 720 mm Tool bore:Capto C6 tools in tool magazin:2 x 80 With C-Axis
faceplate diameter:1600 mm power requirement:80 kW weight of the machine ca.:25 t dimensions of the machine ca.:4,4 x 4,62 m max. workpiece diameter:2000 mm max. diameter of face turning:1800 mm tool taper:ISO50 The machine has been regularly serviced and is in good technical condition. With C-Axis Texte, Bilder, Grafiken, Layout, Strukturen und Algorithmen etc. unterliegen weltweitem Urheberrecht. Unerlaubte Verwendung der Daten, werden sowohl strafrechtlich als auch zivilrechtlich verfolgt. Das ausschließliche Urheber- / Nutzungsrecht dieser Daten wurde nachfolgender Person eingeräumt. Copyright © 2005-2026, Josef Weber. All rights reserved.
turning diameter:270 -300 mm turning length:710 mm total power requirement:43 kW weight of the machine ca.:8,5 t dimensions of the machine ca.:3,16 x 2,15 x 2,15 m The machine does not include a chuck or tools ? the machine was originally purchased without these accessories. The G300 has X, Z, Y, C, SP, and driven tools. A bar feeder can be used, but the machine does not have one.
turning diameter:220 mm turning length:310 mm total power requirement:17 kW weight of the machine ca.:3,3 t dimensions of the machine ca.:2,25 x 1,63 x 1940 m greates pass round over bed:430 mm bore diameter:45 mm centre distance:687 mm slide travel radial ( X-axis ):160 mm slide travel axial ( Z-axis ):310 mm spindle turning speed range:0-6.300 U/min
turning diameter:220 mm turning length:700 / 665 mm total power requirement:17 kW weight of the machine ca.:2,6 t dimensions of the machine ca.:2,63 x 1,98 x 1,94 m greates pass round over bed:430 mm Part length max.:510 slide travel radial ( X-axis ):160 mm bore diameter:45 mm Texte, Bilder, Grafiken, Layout, Strukturen und Algorithmen etc. unterliegen weltweitem Urheberrecht. Unerlaubte Verwendung der Daten, werden sowohl strafrechtlich als auch zivilrechtlich verfolgt. Das ausschließliche Urheber- / Nutzungsrecht dieser Daten wurde nachfolgender Person eingeräumt. Copyright © 2005-2026, Josef Weber. All rights reserved.
turning diameter:490 mm turning length:2000 mm total power requirement:15/20 kW weight of the machine ca.:3,6 t dimensions of the machine ca.:2,8 x1,85 x 1,9 m In like new condition Heidenhain cycle control Torsion-resistant bed, made of high-quality cast iron with hardened, precision-ground guideways and a glass scale on the X-axis Safety clutch on the Z and X axes Sealing air with carbon filter in direct position measuring system High accuracy and rigidity of the lathe spindle thanks to precision spindle bearings, spindle bore Ø 93 mm standard, optional Ø up to 130 mm Solid tailstock, quill Ø 90 mm with internal taper MK5 Large overhang above the facing slide for easy accessibility during shaft machining. The machine has Teach-in CNC Programms. Control: MC420. Tool holder: SAUTER.
turning diameter over bed:350 mm turning diameter over slide rest:240 mm turning length:800 mm Spindle RPM:40 - 2000 in 8 Stufen 1/min total power requirement:3 kW Spindle bore:26 mm tailstock quill taper MT:MK 2 dimensions of the machine ca.:1,5 x 1,0 x 1,6 m weight of the machine ca.:1,9 t Very well maintened center lathe with accessories - 3-jaw, 4-jaw chuck - tailstock with center - 1 boring head - RAPID quick tool change device with 3 holder - saddle mounted steady rest - collant device - set of collets appr. 75% size B 32
turning diameter:500 mm turning length:1500 mm spindle motor:16 kW Spindle RPM:1 - 2500 1/min taper in tailstock MT:5 tailstock quill stroke:160 mm tailstock quill diameter:70 mm total power requirement:22 kW weight of the machine ca.:3,2 t dimensions of the machine ca.:3,2 x 1,8 x 1,4 m Machine with Heidenhain Manual plus control - Multifix quick tool change device - 3-jaw chuck - sliding splash door - various accessories.
turning diameter over bed:500 mm turning diameter over slide rest:310 mm turning length:1500 mm spindle turning speed range:7 - 710 U/min feed range:5,6 - 224 mm/min total power requirement:15 kW weight of the machine ca.:3,7 t dimensions of the machine ca.:2,9 x 1,4 x 1,6 m Machine with 2-axis digital readout - MULTIFIX quick tool change device - 3-jaw chuck
turning diameter over bed:1000 mm turning diameter over slide rest:750 mm turning length:3000 mm weight of the machine ca.:12 t dimensions of the machine ca.:6x2,5x1,8 m spindle bore:110 mm turning speed range:900 U/min Year:1986 Equipment: - Coolant device - 1 static steady rest - 1 rotating steady rest - Faceplate 1.000 mm - Digital display - Rapid traverse
maximum number of results exceeded
please refine your search
1.500 € 
