126,701 used machines on RESALE, but how to find them? Machine Search
Universal CNC lathe INDEX G 400 RATIO Line Hersteller [manufacturer]: INDEX Type [ type]: G 400 Control unit: Siemens C200-4D incl. milling of cylindrical tracks Incl. handwheel Baujahr[construction year]: 10/2004 Turning length 1250 Main spindle D102 with swing-in gear 1700 Nm Size 11 Hollow Clamping Cylinder 102 ARB-SPI ALIGNMENT. AND SWITCHING DEVICE TOOL CARRIER 1 COMPL. AXES X,Y,Z,B with turning/milling operation Disc turret VDI40 10 stations MILLING SPINDLE HSK A63 Tool carrier axles 2 XZ Disc turret VDI40 10 stations SUB-SPINDLE D102 DIRECT DRIVE 1300Nm Size 11 Hollow Clamping Cylinder 102 ARB-SPI ALIGNMENT. AND SWITCHING DEVICE DISC MAGAZINE ON THE LEFT OF THE HSK63 SINGLE-SWING GEARBOX WITH 32 TOOL HOLDERS DISC MAGAZINE RIGHT COMPL. M.32 TOOL HOLDERS HSK 63A Travel path: X= 320mm Z=1250mm Displacement measuring system X-axis glass mast. (abs) Fe ...
Two identical CNC lathes Scherer Feinbau are available. Swing diameter: 200mm, travel path X/Z: 240mm/280mm+515mm, max. workpiece height: 100mm, spindle nose taper: A4, spindle power: 7.6kW, spindle torque: 60Nm, speed: 8000rpm, travel speed X/Z: 60m/30m/min. Weight: approx. 5500kg, control: Siemens Sinumerik. Documentation vorhanden. An on site inspection is possible.
Key data: 900 mm, 5000 mm
Sony Digital read out 2 axis Taper Turning attachment Steady rest 4 pcs 3 jaw chuck selfcentering 4 jaw chuck independent Coolant system
Spindle bore: 42mm, max. workpiece diameter: 115mm, speed: 3150rpm, power: 9kW, bar length: 5200mm. Machine dimensions X/Y: approx. 2100mm/1000mm, weight: approx. 1500kg. Including bar feeder Stamag D 5000 and various accessories such as collets and feed collets. Documentation available. An on site inspection is possible.
A mint-condition 2-axis precision lathe Knuth is available. Turning diameter over bed/support/without bridge: 800mm/570mm/1035mm, max. workpiece length: 1500mm, bed width: 400mm, travel X/Y: 420mm/230mm, top slide swivel range: 70°, speed: 1600rpm, spindle bore: 105mm, rapid traverse X/Z: 2m/4m/min, quill diameter: 90mm, quill stroke: 235mm. Machine dimensions X/Y/Z: approx. 3250mm/1150mm/1950mm, weight: approx. 3300kg. Documentation available. An on-site inspection is possible.
control: 840D-PCU 50 V1 : 3 coolant: ja chip conveyor: ja kW generator - rated current: 110 A connected load: 56 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Center height: 230mm, center width: 1500mm, swing diameter over bed/cross slide: 475mm/260mm, max. workpiece weight: approx. 500kg, spindle diameter: 1000mm, spindle bore: 62.5mm, max. chuck diameter: 250mm, travel X/Z: 1330mm/280mm, rapid traverse X/Z: 8m/4m/min, speed: 3150rpm. Machine dimensions X/Y/Z: approx. 3400mm/2000mm/1600mm, weight: approx. 3300kg, control: Bosch CC 200T. Documentation vorhanden. An inspection on site is possible.
Lathe SARO SP 1250x3000, working condition
A CNC multi-spindle lathe Schütte is available. Number of spindles: 6, cross slides: 2, bar length: 3000mm, max. bar diameter: 20mm, max. square material side size: 14mm, max. hexagonal material side size: 17mm, max. turning length: 40mm, speed: 5000rpm. Machine dimensions X/Y/Z: approx. 3150mm/1050mm/2000mm, weight: approx. 4000kg. Including loading magazine, all collets and accessories. Documentation available. An on-site inspection is possible.
Inv. Num. : 8852 Type: SKJ 8 CNC Producer: TOS Created: GO 2006 Parameters: Control system: MEFI CNC 859 Table diameter: 780 mm Motor power: 40 kW Max. workpiece diameter: 1050 mm Max. workpiece height: 630 mm Max. workpiece weight: 2000 kg Weight: 9000 kg Equipment: Ant electric drives
CNC vertical lathe Type: SKIQ 12 CNC Manufacturer: TOS Control: Mefi Clamping plate diameter: 1250 mm Maximum turning diameter: 1700 mm Maximum workpiece height: 1335 – 1785 mm Maximum workpiece weight: 12000 kg Clamping plate speed: 2.5 – 500 rpm Main motor power: 40 kW Tool magazine: 15 positions Slide stroke (Z): 1000 mm Vertical crosshead movement: 800 – 1250 mm Slide dimensions: 180 × 200 mm Dimensions: 6100 × 5050 × 5255 mm Machine weight: 27000 kg In good condition, under power Find more here - / Contact us at -
A combined vertical CNC turning and cylindrical grinding center EMAG is available. Chuck diameter: 250mm, max. swing diameter: 260mm, travel X/Z: 680mm/200mm, rapid traverse X/Z: 45m/min/30m/min, grinding spindle speed: 45000rpm, tool stations: 12, basket dimensions X/Y: 400mm/600mm, basket stack: 3. Machine dimensions X/Y/Z: approx. 3200mm/1900mm/2650mm, weight: approx. 8000kg, control: Siemens 840DS, operating hours: approx. 35000h, program hours: approx. 22000h. Documentation available. An on-site inspection is possible.
CNC vertical lathe Type: SKJ 12 NC Manufacturer: TOS Control: Mefi Max workpiece diameter: 1400 mm Clamping plate diameter: 1250 mm Maximum workpiece height: 1150 mm Maximum workpiece weight: 6000 kg Clamping plate speed: 2.5 - 225 rpm Main motor power: 37 kW Machine weight: 13000 kg In good condition, under power Find more here - / Contact us at -
turning diameter: 1600 mm turning length: 6200 mm control: Siemens type: Sinumerik turning diameter over slide rest: 1300 mm transmission ratio: . 3-jaw chuck: Schunk Rota Plus 3-jaw-chuck diameter: 630 mm bed width: 750 mm live tooling: steady: 1200 mm steady: 670 mm steady: 408 mm total power requirement: . kW weight of the machine ca.: . t dimensions of the machine ca.: . m Serial number: 262/01 Machine number: 08122394 Quick-change tool post Coolant system Monitor Chip conveyor The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your busines ...
turning diameter over bed: 1200 mm turning diameter over slide rest: . mm turning length: 5000 mm digital readout: Digitalanzeige centre height: 600 mm : 55 PS spindle turning speed range: 5-1000 U/min Rapid movement: längs 4000 mm/min accessories:: Futter, Planscheibe accessories:: Stahlhalter, Lynetten Weight without Lynette: zwischen Spitzen 8000 kg Weight with Lynette: zwischen Spitzen 11500 kg Rapid movement: quer 2000 mm/min total power requirement: kW weight of the machine ca.: ca. 20 t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling ...
Distance between centers: 500mm, center height: 140mm, turning diameter over bed/cross slide: 295mm/155mm, spindle bore: 36mm, speed: 3550rpm, tailstock taper: MK3. Machine dimensions X/Y/Z: approx. 1500mm/800mm/1250mm, weight: approx. 700kg. On site inspection is possible.
SEDIN 1512 vertical lathe YOM 1987 Table diameter 1120 mm Max. turning diameter 1250 mm Max. workpiece height 1000 mm Max. workpiece weight: - 3200 mm (5…80 rpm) - 1000 mm (250 rpm) Main motor power 30 kW Installed power 37 kW Dimensions L/W/H 2750/2975/4100 mm Weight 16000 kg
A conventional precision lathe Weiler is available. Distance between centers: 650mm, center height: 160mm, swing diameter over bed/faceplate: 320mm/190mm, spindle bore: 43mm, speed: 2500rpm, quill diameter: 40mm, quill travel: 85mm. Machine dimensions X/Y/Z: approx. 1800mm/900mm/1600mm, weight: approx. 1050kg. An on-site inspection is possible.
turning diameter: - mm turning length: - mm swing diameter over bed slide: - mm digital readout: ja weight: 4,4 t rapid traverse: ja m/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
A lathe (Universal Turning Solution) is offered, control: Fanuc, tool turret: 12-station, tailstock, 3-jaw chuck. Tool setting arm: Renishaw HPRA. Inspection is possible by arrangement.
turning diameter: 1010 mm turning length: 6000 mm control: Siemens type: Sinumerik 840D turning diameter over slide rest: 650 mm 3-jaw chuck: Schunk Rota Plus 3-jaw-chuck diameter: 500 mm bed width: 750 mm steady: 820 mm Rotating speeds: 1100 U/min length of gap: 500 mm steady: 450 mm spindle passage: 104 mm workpiece weight: 7000 kg main drive: 52 kW turning speeds: 5-900 U/min total power requirement: . kW weight of the machine ca.: . t dimensions of the machine ca.: . m Serial number: 262/01 Machine number: 08122394 Quick-change tool post Coolant system Monitor Chip conveyor The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessorie ...
turning diameter: 1010 mm turning length: 6000 mm control: Siemens type: Sinumerik 840D turning diameter over slide rest: 650 mm 3-jaw chuck: Schunk Rota Plus 3-jaw-chuck diameter: 500 mm bed width: 750 mm steady: 450 mm Rotating speeds: 1100 U/min length of gap: 500 mm steady: 450 mm spindle passage: 104 mm workpiece weight: 7000 kg main drive: 52 kW turning speeds: 5-900 U/min live tooling: total power requirement: . kW weight of the machine ca.: . t dimensions of the machine ca.: . m Serial number: 262/01 Machine number: 08122394 Quick-change tool post Coolant system Monitor Chip conveyor The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items ...
Manufacturer: INDEX Model: V200 Year of Manufacture: 2001 Type of Machine : Automatic lathe with workpiece loader from Schmid Electrical Specifications: Power Supply: 3 Phase Frequency: 50 Hz Rated Voltage: 400 V Control Voltage: 24 V Rated Current: 66 A Power Rating: Rated Power: 31 kW Weight: Control Cabinet Weight: 440 kg Machine Weight: 3,300 kg Find more here - / Contact us at -
A CNC lathe Gildemeister is available. Swing diameter over bed/face slide: 600mm/360mm, bed dimensions X/Y: 350mm/450mm, carriage length: 620mm, carriage width: 250mm, facing travel: 1100mm, chuck diameter: 315mm, spindle bore: 107mm, spindle diameter: 140mm, spindle power: 30kW, torque: 950Nm, speed: 3150rpm, rapid traverse X/Z: 10m/min/5m/min. Quill diameter: 100mm, quill stroke: 180mm, max. tailstock pressure: 1200daN, turning length: 1000mm. Machine dimensions X/Y/Z: approx. 4350mm/2050mm/2000mm, weight: approx. 6400kg, operating hours: 49811h. Documentation available. An on-site inspection is possible.
For sale Emco CNC double spindle lathe type Hyperturn 45. A very complete CNC lathe with left and right spindle, as well as an upper and lower turret. Both turrets have driven tool positions! The upper turret also has a Y-axis with 70 mm travel. Tool holder attachment VDI25, rod capacity left spindle is Ø 45 mm, maximum speed 7,000 rpm. Maximum diameter is Ø 300 mm. Maximum part diameter is 480 mm. The distance between the two spindles is 720 mm. Fanuc 18i-TB control. The machine is equipped with high pressure pump, chip conveyor with right ejection, parts catcher, manual collet devices, etc. Available from stock, subject to prior sale. The machine has a light layer of soot. This can be easily removed.
Offered is a CNC lathe (sub-spindle, milling/C-axis, Y-axis). Equipped with bar feeder for balls 120mm, incl. Fanuc six-axis robot M-16iB with R-30iA control for automated loading and unloading as well as a bunker for raw material supply. Machine is operational. Inspection possible by prior arrangement.
General Manufacturer: Citizen Type: Cincom R 07 VI Year of Make: 2012 Control: Citizen Cincom Number of axles: 6 Turning diameter: 7 mm Turning length: 40 mm Thread diameter: 4 m Spindle passage: 12 mm Spindle Speed: 0 – 16,000 rpm Spindle power: 1.1 kW Sub-spindle Speed: 0 – 10,000 rpm Pick-up length: 40 mm C-axis: 1° Tapping diameter: 3 m Tool Carrier Quantity: 2 Number of stations: 13 Turning tools: 5 Drilling tools: 4 Tool shank cross-section: 8 mm Counter-processing Number of tools: 4 Drive Connection 50 Hz 3x: 400 Volts Sub-spindle power: 0.5 kW Total power requirement: 4 kVA Dimensions and weight Dimensions: 1,465 mm x 560 mm x 1,410 mm Weight: approx. 950 kg Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included: Pneumatic workpiece extraction LNS Tryton 112 Rother mini ...
Offered is a lead and feed screw lathe. Swing diameter over bed 710mm, over carriage 480mm. Distance between centers 1000mm. Spindle bore 71mm. Speeds 18-800rpm (12 steps). Motor power 7.5kW. Machine weight approx. 3070kg. Equipped with Heidenhain digital readout, chip protection wall, splash guard, coolant system, and four-position tool post. Repaired and inspected prior to storage. Inspection possible by prior arrangement.
Description Labor-E 275 Details Type 275 Year of manufacture 1997 Machine no. 9711848 FAGOR CNC 850T control Tip height above bed 275 mm Center width 3,000 mm Footprint 5,050 x 1,800 x 1,430 mm Circumferential diameter over bed 550 mm Circumferential diameter over carriage 340 mm Spindle nose 8" Spindle bore 103 mm Main spindle motor 11.5 kW Z-axis motor 1.4 kW X-axis motor 0.7 kW Quill feed 220 mm Quill diameter 100 mm incl. documentation SPECIAL PRICE
Number of spindles: 6, max. bar capacity: 42mm, max. machining diameter: 42mm, speed: 5000rpm, machining slides: 4, number of slides front/rear: 4/2. Machine dimensions X/Y/Z: approx. 7200mm/1700mm/2300mm, weight: approx. 10000kg. The machine has an electrical problem as a result of which the control does not start up. Documentation available. On site inspection is possible.
A cycle-controlled CNC lathe Gildemeister is available. Center distance: 1500mm, max. turning length: 1500mm, swing diameter over bed/cross slide: 500mm/290mm, speed: 2800rpm, spindle bore: 70mm, spindle torque: 1050Nm, travel X/Z: 260mm/1600mm, rapid traverse X/Z: 6m/8m/min, feed rate: 5m/min, feed force: 5kN, tailstock quill stroke: 180mm, tailstock quill diameter: 80mm. Machine dimensions X/Y/Z: approx. 3200mm/1800mm/1900mm, weight: approx. 3100kg, operating hours: 79727h. Documentation available. On-site inspection is possible.
Center height: 180mm, swing diameter over bed/cross slide: 360mm/190mm, distance between centers: 750mm, speed: 1250rpm, machine dimensions X/Y/Z: approx. 2800mm/1000mm/1300mm, weight: approx. 1750kg. An on-site inspection is possible.
turning diameter: mm turning length: mm control: 0 total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Parallel Lathe SCULFORT type MAXICAP SENIOR 380 x 4000 RN Between points: 4000 mm Maxi Ø on bench: Ø 780 mm Maxi Ø over saddle: Ø 580 mm (rear trolley dismantled) - Ø 500 mm (without rear trolley dismantled) Maxi diameter in brocken bed: Ø 1160 mm Width in brocken bed: 400 mm Spindle: Ø 80 mm Spindle speed: from 16 to 1280 RPM Square turret 3-jaws chuck Ø 400 mm Threadings: Metric + Withworth 3 points steady max Ø 350 mm Tailstock CM6 Motor power: 13 CV Feeds: auto transverse + longitudinal Clutch rapid used Lubricant tank Dimensions (L x W x H): 6500 x 1800 x 1900 mm Weight: approx 7 T
A conventional lead and feed screw lathe Weiler without safety components (e.g. spindle guard) is available. Center distance: 800mm, center height: 155mm, spindle bore: 38mm, swing diameter over bed/bed slide/cross slide: 330mm/290mm/170mm, max. workpiece weight: 100kg, spindle taper: MK5. Faceplate diameter: 300mm, chuck diameter: 165mm, speed: 2800rpm, quill stroke: 110mm, quill diameter: 50mm. Machine dimensions X/Y/Z: approx. 1900mm/850mm/1300mm, weight: approx. 1050kg. On-site inspection is possible.
Manufacturer: INDEX Model: MS42C Year of Manufacture: 1998 ( Machine 1 ) 2002 (machine2 ) Machine 1 : Power supply: 3-phase / 50 Hz Rated voltage: 400 V Control voltage: 24 V Rated current: 125 A Rated power: 69 kW Electrical cabinet weight: 1500 kg Machine weight: 11000 kg Machine 2 : Power supply: 3-phase / 50 Hz Rated voltage: 400 V Control voltage: 24 V Rated current: 100 A Rated power: 72 kW Electrical cabinet weight: 1500 kg Machine weight: 11000 kg Working area Maximum bar diameter (bar feed, external): 42 mm Bar feed positions: spindle positions no. 1, 3, 4, 6 Spindle circle diameter: 320 mm Main spindle (turning spindle) Clamping system: Power clamping with INDEX spring-loaded hollow clamping cylinder and draw tube Maximum clamping stroke: 4 mm Clamping force: 26 kN Drives Main spindle drive (per spindle): Motor type: Variable-speed hollow-shaft A ...
A conventional universal lathe Bulmak with gap bed (gap-bed lathe) is available. Center height: 210mm, turning diameter over bed/cross slide/in gap: 440mm/230mm/620mm, distance between centers: 1000mm, spindle speed: 2000rpm, bed width: 360mm, travel X/Z: 250mm/130mm. Machine dimensions X/Y/Z: approx. 3100mm/1300mm/1400mm, weight: approx. 2500kg. The machine is partially defective. On-site inspection is possible.
An untested conventional turret lathe WMW with extensive accessories is available. Machine dimensions X/Y/Z: approx. 2500mm/1600mm/1200mm, weight: approx. 2000kg. An on-site inspection is possible.
turning diameter over bed: 1100 mm turning diameter over slide rest: 740 mm turning length: 6000 mm spindle bore: 110 mm turning speeds: 16-1600 U/min digital readout: faceplate: mm 3-jaw chuck: steady: total power requirement: 22 kW weight of the machine ca.: 11 t dimensions of the machine ca.: m Year of manufacture 1999 Control: Siemens 840D Turning length (mm) 6000 Max. turning diameter (mm) 1100 Max. turning diameter over slide (mm) 740 Spindle diameter (mm) 105 Speed 16 - 1800 (18x) kW 22 Voltage 380V Hz 50 3-jaw chuck ø (mm) ¦ 4-jaw chuck ø (mm) ¦ Fixed steady rest ø (mm) 2x Through-spindle cooling ¦ Multifix tool post The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, ...
turning diameter over bed: 630 mm turning diameter over slide rest: . mm turning length: 3150 mm hollow: mm Number:: 16304188/ turning diameter: mm weight: 4,8 t The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Year of construction: 80s Technical data: Tip height: 295 mm Turning diameter over bed: 600 mm Turning diameter over support: 390 mm Center width: 1000 mm Spindle bore: 72 mm Speed range: 72 - 1400 rpm Drive power: 11 kW Weight, approx.: 4000 kg Equipment: - 2-axis digital display, Heidenhain ND 780 - Collet chuck - 3-jaw lathe chuck - Quick-change holder System Multifix with 2 inserts - Spindle protection - Turning steel holder protection
Two lead and feed screw lathes by Weiler are available. 1) Weiler Condor VS-2, distance between centers: 800mm, center height: 155mm, swing diameter over bed/cross slide: 330mm/160mm, speed: 2800rpm, machine dimensions X/Y/Z: approx. 1900mm/900mm/1500mm. 2) Weiler Praktikant M, distance between centers: 650mm, center height: 160mm, swing diameter over bed/cross slide: 320mm/175mm, machine dimensions X/Y/Z: approx. 1700mm/1000mm/1700mm, weight: approx. 700kg. Both machines show isolated individual functional limitations, but are operational. Documentation available. On-site inspection is possible.
A CNC lathe Gildemeister including a chip conveyor and a Forkat chuck is available. 1) Gildemeister NEF CT 60, year of manufacture: approx. 1982, distance between centers: 1000mm, turning length: 1000mm, max. turning diameter: 460mm, center height: 300mm, bed width: 450mm, spindle bore: 107mm, speed: 3015rpm, tool stations: 12, quill diameter: 100mm, quill stroke: 180mm, machine dimensions X/Y/Z: approx. 5400mm/2100mm/2000mm, weight: approx. 7000kg. 2) Chip conveyor Allweiler GB 30L 38L. Without Filter. Documentation available. An on-site inspection is possible.
multifix: ja digital: ja centre distance: 1000 mm : 440 length: 2000 mm width: 1400 mm height: 1500 mm total power requirement: 5,5 kW weight of the machine ca.: 1,7 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 850 mm turning length: 2200 mm control: Siemens 840 D The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Vertical CNC Lathe Manufacturer: Okuma Type LVT300-M Year of manufacture 2005 Control OSP-E100L Turning diameter over bed: 320 mm Max. turning diameter: 280 mm Max. workpiece length: 200 mm Travel X: 210 mm Travel Y: 330 mm C (pitch): 360° Spindle speed: 40–4,000 rpm Spindle bore: 62 mm Number of tool positions in the turret: 12 Length of the feed belt: approx. 3,500 mm Dimensions & Weight Dimensions (L x W x H): 5,000 x 1,500 x 2,400 Weight: 6,500 kg EQUIPMENT Turret can accommodate powered tools Feed belt 17 pallets There are still various steel holders and AGW s to purchase, these are not included in the scope of delivery. For more information, I am always available at 01778957069. Machine is in a used very good condition, no maintenance backlog, geometrically TOP
A slant bed lathe Traub Sonim is available. Turning diameter over bed/cross slide: 350mm/160mm, turning length: 200mm, speed: 5000rpm. Machine dimensions X/Y/Z: approx. 3200mm/1500mm/1700mm, weight: approx. 3500kg. An on-site inspection is possible.
Copyng lathe with 4 spindles BACCI mod. T4MO - Max turning diameter 170 mm - Max working length 1000 mm - Longitudinal sanding unit - Nr. 4 spindle - Year 1994
A fully autonomous CNC dual-spindle turning machine Index is available. Turning diameter: 220mm, main spindle bar capacity: 65mm, main spindle power chuck diameter: 210mm, sub-spindle bar capacity: 60mm, sub-spindle power chuck diameter: 210mm, tool stations: 12, Y-axis travel: 120mm, gripper diameter range: 4mm-45mm/40mm-65mm, coolant pump pressure: 8bar, high-pressure pump capacity: 80bar, chip conveyor discharge height: 1250mm. Overall system dimensions X/Y/Z: approx. 9150mm/4350mm/2000mm, weight: approx. 10500kg, operating hours: approx. 92000h. Including bar loader FMB turbo 8-80 XT/3200A, automatic loading and unloading system alphaMAX 6-axis, chip conveyor, coolant system, high-pressure pump and spare parts. Operation with the loading and unloading system is designed for disc diameters from 80mm to 220mm. This is a fully automated system without operator. Documentation available. ...
turning diameter over bed: 400 mm turning diameter over slide rest: 264 mm turning length: 1000 mm turning diameter in the gap: 550 mm turning speeds: 44 - 2000 U/min centre height: 200 mm spindle bore: 52 mm tailstock quill taper MT: 4 MK connected load frequency: 400 V total power requirement: 1,5 / 2,4 kW weight of the machine ca.: 0,9 t dimensions of the machine ca.: 1,9 x 0,8 x 1,56 m 3-axis digital display 3-jaw chuck 200 mm. 4-jaw chuck 200 mm. Faceplate 320mm bezel fixed running bezel 4-fold steel holder. Halogen machine light machine light foot brake removable chip tray, chip protection wall Hardened and ground bed tracks Complete coolant system lining protection machine tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
maximum number of results exceeded
please refine your search
